OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB

[freddyfarnsworth]

Luke, you are a God among men!

I like your socks   They look warm.

Yes very nice.

[1715251182]

1715251182

[1715251182]

1715251182

[1715251182]

1715251182

[BRADLEYPLOOF]

Luke, you are a God among men!

I like your socks   They look warm.

They're awesome.  most guys are afraid of wearing them, but not me.  I'll admit to being a little off, but that's what makes me awesome 

[nwoolls]

They're awesome.  most guys are afraid of wearing them, but not me.  I'll admit to being a little off, but that's what makes me awesome 

I was serious - it's 0C outside atm. I want your socks.

[BRADLEYPLOOF]

They're awesome.  most guys are afraid of wearing them, but not me.  I'll admit to being a little off, but that's what makes me awesome 

I was serious - it's 0C outside atm. I want your socks.

Amazon...hit it up!

[ManeBjorn]

There are also the HeatHolders on Amazon.  I wear those as they are toasty with grip on the bottom.
http://www.amazon.com/dp/B0093FXMFI/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=1R1YG4M428IBB&coliid=I3389BU0AWTCL6

They are great even when it was -40f two nights in a row.

They're awesome.  most guys are afraid of wearing them, but not me.  I'll admit to being a little off, but that's what makes me awesome 

I was serious - it's 0C outside atm. I want your socks.

Amazon...hit it up!

[doctormandrake]

I am having difficulty setting up solo mining on bfgminer, using settings that work fine solo mining on cgminer etc. I have tried with several coins, I can pool mine fine on bfgminer or with multiminer but any attempt to solo mine has been fruitless (returns pool or password error thing)  Does anyone else have this problem, or has anyone found a way? Maybe I am missing something simple.

[dmpotter]

what command line are you using?

[doctormandrake]

Code:

bfgminer.exe -o http://127.0.0.1:12646 -O user:password -S erupter:all -S antminer:all --set-device antminer:clock=x0981 --icarus-options 115200:2:2 --icarus-timing 2.5=90 

the same line works fine for pools but cannot get solo working, have tried on a few coins that work on cgminer, but I much prefer bfgminer so would like to be able to use it instead. I have seen others successfull in solo with bfg so figure I am missing something obvious...

[dmpotter]

Code:

bfgminer.exe -o http://127.0.0.1:12646 -O user:password -S erupter:all -S antminer:all --set-device antminer:clock=x0981 --icarus-options 115200:2:2 --icarus-timing 2.5=90 

the same line works fine for pools but cannot get solo working, have tried on a few coins that work on cgminer, but I much prefer bfgminer so would like to be able to use it instead. I have seen others successfull in solo with bfg so figure I am missing something obvious...

I never used -O user:password, I've always used

Code:

-u user -p password

[doctormandrake]

I never used -O user:password, I've always used

Code:

-u user -p password

just tried, no success. also tried with and without http://

[Luke-Jr]

solo mining is covered in README

[doctormandrake]

solo mining is covered in README

cool I will go read it again thank ya

[hurricandave]

VLC Media has decided it owns the right to "always open with" my .bin file does this make any difference?

[HellDiverUK]

You can definitely OC the U1's.  Check out the Tips and Tricks section here: https://bitcointalk.org/index.php?topic=390929.0 for U1's.  Also, make sure if you OC them that you have ample cooling...those little suckers get hot enough to boil water...

I've mine running at x0A81 (2.2GH rated) which gives between 2.05 and 2.15GH with no errors.  Only cooling I have it the hub sitting against the fan side of the PSU that runs most of my mining gear.  It's basically just a breeze, but it's enough.  They run off an aluminium Anker 10-port powered by ATX.

[Mudbankkeith]

solo mining is covered in README

cool I will go read it again thank ya

Hi
I set up solo mining a while ago using GUIminer. There was a good guide in GUIminer on solo setup.
Then when I want to solo mine I use the GUIminer solo mining control to start bitcoin-qt in server mode.

My solo batch file is then:-

bfgminer.exe -o http://localhost:8332 -O mylocalname:mylocalpassword -S erupter:all --coinbase-addr xxxxxyyyyyyyyyzzzzzzzzzz --coinbase-sig "rig1: This is My Block!"

There is probably a quicker way these days, but this still works.

EDIT:-  Multiminer can probably do a good job as well.

[povlhp]

My 2x U1 are performing fine. Both locally and Eligius are above 4 GH/s with the 981 setting for long averages. But going a little up and down.
No hardware errors or one in 10.000. 
a81 fails completely on one. Many errors on the other.

[Cassey]

My 2x U1 are performing fine. Both locally and Eligius are above 4 GH/s with the 981 setting for long averages. But going a little up and down.
No hardware errors or one in 10.000. 
a81 fails completely on one. Many errors on the other.

My 6x u1 are performing fine.  Running right at 12 GH/s with 0.05% hardware errors pretty consistently.  Awaiting resistors now expected at the end of the month.

[BRADLEYPLOOF]

Any recommendations for powered USB hubs for AntMiner U1's?

[nwoolls]

Any recommendations for powered USB hubs for AntMiner U1's?

I like this device so far:

https://bitcointalk.org/index.php?topic=413406.0

I have a variety of ASICs in it and do not have the issues I used to have with power and 7-port D-Link hubs.

[BRADLEYPLOOF]

Any recommendations for powered USB hubs for AntMiner U1's?

I like this device so far:

https://bitcointalk.org/index.php?topic=413406.0

I have a variety of ASICs in it and do not have the issues I used to have with power and 7-port D-Link hubs.

That sucker's expensive.  I was hoping for a slightly less costly option.  I only have 5 U1's, so having to much power isn't really necessary.  Although if I OC those little guys to run at 3-4 GH/s then I might need it.  Any other recommendations out there?