[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!!

[tutorialevideo]

This is great i already did a preorder so.. lets see.

I am using ethos and i would love to conect them and work like  one device and auto reboot when a gpu crashed

Thanks!

[tytanick]

Hi Tytanick,

Just curious, will your SMos have the watchdog agent installed and polling the SRR by default? Or do we need to install it separately?

I am assuming from the GUI, that you can set values in seconds to initiate reboot at rig if no heartbeat after x seconds/minutes.

Since the SRR basically takes over the on/off switch -- can I issue a command to power off the rig, and power on after 5 minutes?

Thanks

Ofcourse SimpleMining OS will have installed utility and options in web interface to manage SRR
It will be implemented  in next 2 weeks
5 min cooldown, yes. Some rigs wont turn on after problem right away and there are need to be turned off for few minutes.
This option is already programmes and its called LONG REBOOT

This is great i already did a preorder so.. lets see.
I am using ethos and i would love to conect them and work like  one device and auto reboot when a gpu crashed
Thanks!

No problem, All windows and linux are supported !



Also:

SimpleRigResetter (SRR) pros over other solutions:
- propably cheaper when using more than 3-8 rigs. Even more cheaper it wil be with SRR + Extension Board for addonitional 24 Rigs . (then cost per rig will be about 10$ in 32 rigs enviroment)
- auto rebooting - programmed tools and scripts which will auto reboot hanged rigs VS manual clicking in PDU/APC (or scripting but someone must have skills and time)
- no power limitation like in PDU/APC which can give average max of ~3000 W - so max 3-4 rigs connected to one APC - thats becasue SRR doesnt transfer any 120/240V power.
- rigs isolation - if ther will be something with rig, rest rigs wont suffer from it via my device due to opti transistors (there is no phisical connection between rigs)
- turning ON feature which accually can tun ON rig obiously But is you dont have set "turn ON on power restore" or sometimes when you shutdown rig or simply bug in motherboard firmware - then rig wont turn ON automatically in other solutions.
In mine, SRR can read POWER LED is it ON or OFF and can Power ON and OFF rig via normal traditional "Power button behavior"
- you can check status of all rigs (is it turned ON/OFF) on one page.
- for big farms like 100+ rigs there is fewer devices to be managed. SRR+2 Extenstion boards can manage 56 rigs while other solutions can manage up to 4-10 max

[citronick]

Hi Tytanick,

Just curious, will your SMos have the watchdog agent installed and polling the SRR by default? Or do we need to install it separately?

I am assuming from the GUI, that you can set values in seconds to initiate reboot at rig if no heartbeat after x seconds/minutes.

Since the SRR basically takes over the on/off switch -- can I issue a command to power off the rig, and power on after 5 minutes?

Thanks

Ofcourse SimpleMining OS will have installed utility and options in web interface to manage SRR
It will be implemented  in next 2 weeks
5 min cooldown, yes. Some rigs wont turn on after problem right away and there are need to be turned off for few minutes.
This option is already programmes and its called LONG REBOOT

This is great i already did a preorder so.. lets see.
I am using ethos and i would love to conect them and work like  one device and auto reboot when a gpu crashed
Thanks!

No problem, All windows and linux are supported !



Also:

SimpleRigResetter (SRR) pros over other solutions:
- propably cheaper when using more than 3-8 rigs. Even more cheaper it wil be with SRR + Extension Board for addonitional 24 Rigs . (then cost per rig will be about 10$ in 32 rigs enviroment)
- auto rebooting - programmed tools and scripts which will auto reboot hanged rigs VS manual clicking in PDU/APC (or scripting but someone must have skills and time)
- no power limitation like in PDU/APC which can give average max of ~3000 W - so max 3-4 rigs connected to one APC - thats becasue SRR doesnt transfer any 120/240V power.
- rigs isolation - if ther will be something with rig, rest rigs wont suffer from it via my device due to opti transistors (there is no phisical connection between rigs)
- turning ON feature which accually can tun ON rig obiously But is you dont have set "turn ON on power restore" or sometimes when you shutdown rig or simply bug in motherboard firmware - then rig wont turn ON automatically in other solutions.
In mine, SRR can read POWER LED is it ON or OFF and can Power ON and OFF rig via normal traditional "Power button behavior"
- you can check status of all rigs (is it turned ON/OFF) on one page.
- for big farms like 100+ rigs there is fewer devices to be managed. SRR+2 Extenstion boards can manage 56 rigs while other solutions can manage up to 4-10 max

execellent -- this SRR is exactly what I am looking for.

[tytanick]

It was exactly what i was looking for the last 3 years but i could not find it
And i wasted so much time and mining hours for driving to hanged rigs ....
Finally OVER !

[citronick]

It was exactly what i was looking for the last 3 years but i could not find it
And i wasted so much time and mining hours for driving to hanged rigs ....
Finally OVER !

Well this project is well worth it for you and also the mining community.
Overtime, I hope you can continue to improve it so that it's as easy and point and click to manage multiple GPU rigs.... and maybe others too.

I am wondering how to make use of SRR on the Pandaminers.... anyone has opened the Panda and checked if the pins are available for SRR?

[tytanick]

It was exactly what i was looking for the last 3 years but i could not find it
And i wasted so much time and mining hours for driving to hanged rigs ....
Finally OVER !

Well this project is well worth it for you and also the mining community.
Overtime, I hope you can continue to improve it so that it's as easy and point and click to manage multiple GPU rigs.... and maybe others too.

I am wondering how to make use of SRR on the Pandaminers.... anyone has opened the Panda and checked if the pins are available for SRR?

Are Panda miners hanging itself ?
I assume pandaminer has normal motherboard ? or not ?
If you have Power button and Power led then propably there are those pins
Anyway  opening pandaminer could result in warranty loose ?

[citronick]

It was exactly what i was looking for the last 3 years but i could not find it
And i wasted so much time and mining hours for driving to hanged rigs ....
Finally OVER !

Well this project is well worth it for you and also the mining community.
Overtime, I hope you can continue to improve it so that it's as easy and point and click to manage multiple GPU rigs.... and maybe others too.

I am wondering how to make use of SRR on the Pandaminers.... anyone has opened the Panda and checked if the pins are available for SRR?

Are Panda miners hanging itself ?
I assume pandaminer has normal motherboard ? or not ?
If you have Power button and Power led then propably there are those pins
Anyway  opening pandaminer could result in warranty loose ?

Have to open up and see the mobo in detail - perhaps philip or eliovp can comment since they deep dive on the Pandaminers guts and insides.

[philipma1957]

It was exactly what i was looking for the last 3 years but i could not find it
And i wasted so much time and mining hours for driving to hanged rigs ....
Finally OVER !

Well this project is well worth it for you and also the mining community.
Overtime, I hope you can continue to improve it so that it's as easy and point and click to manage multiple GPU rigs.... and maybe others too.

I am wondering how to make use of SRR on the Pandaminers.... anyone has opened the Panda and checked if the pins are available for SRR?

Are Panda miners hanging itself ?
I assume pandaminer has normal motherboard ? or not ?
If you have Power button and Power led then propably there are those pins
Anyway  opening pandaminer could result in warranty loose ?

Have to open up and see the mobo in detail - perhaps philip or eliovp can comment since they deep dive on the Pandaminers guts and insides.

The power button is hard wired to the mobo.  I am pretty sure SRR MAY NOT WORK. The mobo will boot into simple mining with power off and power on.
To make SRR WORK YOU MAY need to detach the on off button that is soldered to the mobo.

Expose the mobo pins and attach SRR.

[vapourminer]

is there a power led on the panda? i believe ssr needs the power led leads also to see if rig is currently on or off.

[philipma1957]

is there a power led on the panda? i believe ssr needs the power led leads also to see if rig is currently on or off.

yes  but  it is all soldered /hard wired

[tytanick]

is there a power led on the panda? i believe ssr needs the power led leads also to see if rig is currently on or off.

yes  but  it is all soldered /hard wired

If there will be need, i can do other device which will cut off/on power to rigs.
But only if there will be demand to do that. I already have this kind of devices (it was first idea what i produced)

[tutorialevideo]

is there a power led on the panda? i believe ssr needs the power led leads also to see if rig is currently on or off.

yes  but  it is all soldered /hard wired

If there will be need, i can do other device which will cut off/on power to rigs.
But only if there will be demand to do that. I already have this kind of devices (it was first idea what i produced)

Somethink like the managed PDU-s? When you have time work on your OS to suport the 400 series and i will move my entire farm arround 200 rigs on your os! I am managing a hosting company and my team and our clients will be happy to know that we have a good solution to reboot rigs all the time.

Right now using PDu-s and people to hard reboot a miner that is stucked.

[tytanick]

is there a power led on the panda? i believe ssr needs the power led leads also to see if rig is currently on or off.

yes  but  it is all soldered /hard wired

If there will be need, i can do other device which will cut off/on power to rigs.
But only if there will be demand to do that. I already have this kind of devices (it was first idea what i produced)

Somethink like the managed PDU-s? When you have time work on your OS to suport the 400 series and i will move my entire farm arround 200 rigs on your os! I am managing a hosting company and my team and our clients will be happy to know that we have a good solution to reboot rigs all the time.

Right now using PDu-s and people to hard reboot a miner that is stucked.

Why do you think i OS doesnt dupport RX400 ?
It supports them, There are some limitations as you can set exactly clock speed but only DPM state and 0-20% for memory overclocking but still its not a big deal.
Anyway if you are missing something in my OS, tell me what is it.

Human resetters calso costs, and propably it will return in a year or less.
The importants thing is timing, My resetter will detect hang and reset in less than specified number of seconds while human needs to accually "see" problem go from here to there which overall is like 5-10 minutes ?

[philipma1957]

is there a power led on the panda? i believe ssr needs the power led leads also to see if rig is currently on or off.

yes  but  it is all soldered /hard wired

If there will be need, i can do other device which will cut off/on power to rigs.
But only if there will be demand to do that. I already have this kind of devices (it was first idea what i produced)

Somethink like the managed PDU-s? When you have time work on your OS to suport the 400 series and i will move my entire farm arround 200 rigs on your os! I am managing a hosting company and my team and our clients will be happy to know that we have a good solution to reboot rigs all the time.

Right now using PDu-s and people to hard reboot a miner that is stucked.

Why do you think i OS doesnt dupport RX400 ?
It supports them, There are some limitations as you can set exactly clock speed but only DPM state and 0-20% for memory overclocking but still its not a big deal.
Anyway if you are missing something in my OS, tell me what is it.

Human resetters calso costs, and propably it will return in a year or less.
The importants thing is timing, My resetter will detect hang and reset in less than specified number of seconds while human needs to accually "see" problem go from here to there which overall is like 5-10 minutes ?

Any big setup auto reset is gold standard.
But  if you have pdus say 8 rigs on a 30 amp pdu and 1 rig fails  a power off and power on will start all 8 rigs over.

SRR  will just do the 1 rig.




yeah I have all rx 470's rx 480's

3 rigs are rx 470's
1 rig is the pandaminer all rx 480's



the 4 rigs appear as one on my pool

[tytanick]

Ok guys.
Today i received first batch if RigResetters (i cant tell exact number but below is photo with some of it
Next days i wil be informing more fequent about status and start shipping  date

[tytanick]

Little update:

I decided that i will add for each board free backplate - lasercat wooden backplate.
It will be protecting down side of SRR in case if someone will place it on metal construction - which could not be obvious for some people
Anyway, all already placed orders will receive this backplate with no addonitional costs !
Here is how it looks I hope you like it.

[tutorialevideo]

great! i am really happy to see your product will start shipping!

[philipma1957]

great! i am really happy to see your product will start shipping!

Look forward to some demos of it.

I need to decide what I am going to do with my setup.

[jadefalke]

placed my order and payed it, only thing which is way to expensive is the standard shipping in EU for 37 Euro. From Germany i can ship to whole europe for 17 Euro...

[tytanick]

great! i am really happy to see your product will start shipping!

Look forward to some demos of it.

I need to decide what I am going to do with my setup.

What do you mean by deciding about your setup ? i dont understand ?