Bakes007
Newbie
 Offline
Activity: 17
Merit: 0
|
 |
June 27, 2017, 02:57:54 PM |
|
can anyone share your 1070 settings and hashrate?
get 470 sols with 68% TDP, 65°C Temp Limit, +100 Core, +500 Memory, 75% Fanspeed Trying this out on a single EVGA 1070, and get about 400-410 sol/s. 4.05 sol/w. Went to core +144 and memory to +569 and at 412 sol/s. 4.00 sol/w. Definitely worth playing around with the settings. It's a MSI 1070 Gaming X 8g - might has a higher base value already? but 412 sol/s would be even for a stock 1070 very low, should bring at least ~ 420-430 Got 4 x MSI GTX 1070 Gaming X Running Core Clock +129, memory Clock +594, Fan Speed Auto, Temps 55 - 60°C, 1780 Sols |
|
|
|
|
|
|
|
|
|
Mikanoshi
|
|
June 27, 2017, 05:35:06 PM |
|
I did this, but I do not know if it worked
It only affects memory clock, at least on 1080. If during mining your memory clock is the same as during gaming then it is working. You have some other bug  |
|
|
|
iVah1d
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 27, 2017, 11:11:25 PM |
|
i get 450 sol/s in EWBF but in flypool it shows effective between 370-420
and the fun part is that i gain 0.00035ZEC/hour = 0.0084zec/day
ridiculous...
i cant figure out what's wrong.. any tips ?
thanks
|
|
|
|
|
lokko
Member
Offline
Activity: 108
Merit: 11
|
|
June 27, 2017, 11:49:53 PM |
|
i get 450 sol/s in EWBF but in flypool it shows effective between 370-420
and the fun part is that i gain 0.00035ZEC/hour = 0.0084zec/day
ridiculous...
i cant figure out what's wrong.. any tips ?
thanks
Did you disable dev fee? If so the same problem I have synonymous! |
|
|
|
|
jollymonsa
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 28, 2017, 12:04:51 AM |
|
this is crazy, but interesting. |
|
|
|
|
mcoinm
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 28, 2017, 03:06:11 AM |
|
In bios Advance Setting - did you set
peg0 & peg1 to gen1 (must)
above 4G enable
Did try that, tried auto, gen3, gen2, and gen1, no luck. But no issues now, got it working! Looks like it was the drivers all along. Just an FYI to anyone else who runs into this same issue, make absolutely sure that the drivers get fully uninstalled when you are setting up new cards, adding, etc. I thought running DDU would be enough, but looking at device manager after a DDU uninstall but before a driver reinstall, while 4 of the 5 cards showed up as generic display adapters, one showed up still as 1080ti, just marked as having problems. I had seen this multiple times before, but just wrote it off as a quirk. This time though for some reason it struck me that this couldn't be right. I made sure to right-click and uninstall the device along with it's drivers, and just to make sure, did the same for the other 4, even though they were just listed as display adapters. Restarted, and all 5 showed up listed as display adapters. Installed drivers, restarted again, and there they all were, mining away. Checked again with the pcie speed, left it on auto in the BIOS just to check, and it still worked, so looked to be purely a driver issue. Not sure how or for what reason this issue could affect the relationship between the x16 and x8 port, but I'm just glad it's solved now, was really bugging me. Thanks for your help, and anyone else that responded as well. |
|
|
|
|
|
sublimus
|
|
June 28, 2017, 06:24:07 AM |
|
In bios Advance Setting - did you set
peg0 & peg1 to gen1 (must)
above 4G enable
Did try that, tried auto, gen3, gen2, and gen1, no luck. But no issues now, got it working! Looks like it was the drivers all along. Just an FYI to anyone else who runs into this same issue, make absolutely sure that the drivers get fully uninstalled when you are setting up new cards, adding, etc. I thought running DDU would be enough, but looking at device manager after a DDU uninstall but before a driver reinstall, while 4 of the 5 cards showed up as generic display adapters, one showed up still as 1080ti, just marked as having problems. I had seen this multiple times before, but just wrote it off as a quirk. This time though for some reason it struck me that this couldn't be right. I made sure to right-click and uninstall the device along with it's drivers, and just to make sure, did the same for the other 4, even though they were just listed as display adapters. Restarted, and all 5 showed up listed as display adapters. Installed drivers, restarted again, and there they all were, mining away. Checked again with the pcie speed, left it on auto in the BIOS just to check, and it still worked, so looked to be purely a driver issue. Not sure how or for what reason this issue could affect the relationship between the x16 and x8 port, but I'm just glad it's solved now, was really bugging me. Thanks for your help, and anyone else that responded as well. HURRAY! |
|
|
|
|
SS2006
|
|
June 28, 2017, 06:34:21 AM |
|
my go to miner. fee is kinda high though. would like to see it become 1% one day like most miners out there (single coin miners at least, i realize claymores dual miner is 2%)
|
|
|
|
|
|
Mikanoshi
|
|
June 28, 2017, 06:39:19 AM |
|
my go to miner. fee is kinda high though. would like to see it become 1% one day like most miners out there (single coin miners at least, i realize claymores dual miner is 2%)
devfee is adjustable |
|
|
|
|
SS2006
|
|
June 28, 2017, 06:40:16 AM |
|
my go to miner. fee is kinda high though. would like to see it become 1% one day like most miners out there (single coin miners at least, i realize claymores dual miner is 2%)
devfee is adjustable i didnt know that. thanks for informing me. so default is 2%? how to change it kudos |
|
|
|
|
iVah1d
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 28, 2017, 06:44:33 AM |
|
i get 450 sol/s in EWBF but in flypool it shows effective between 370-420
and the fun part is that i gain 0.00035ZEC/hour = 0.0084zec/day
ridiculous...
i cant figure out what's wrong.. any tips ?
thanks
Did you disable dev fee? If so the same problem I have synonymous! no.. how can i do that? does 2% dev fee impact the income this much? (like nearly 50%) |
|
|
|
|
|
nUm81
|
|
June 28, 2017, 07:05:11 AM |
|
i get 450 sol/s in EWBF but in flypool it shows effective between 370-420
and the fun part is that i gain 0.00035ZEC/hour = 0.0084zec/day
ridiculous...
i cant figure out what's wrong.. any tips ?
thanks
Did you disable dev fee? If so the same problem I have synonymous! no.. how can i do that? does 2% dev fee impact the income this much? (like nearly 50%) What is your reject rate? |
|
|
|
|
Mikanoshi
|
|
June 28, 2017, 07:17:16 AM |
|
no.. how can i do that?
Ehm... Read OP?) |
|
|
|
mushtuk
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 28, 2017, 07:23:27 AM |
|
I have four 3GB Gigabyte 1060 and I am using 0.3.4b on Windows 8.1. Which solver would get most sols? Would change in OS get me more sols?
Currently I am getting between 1100-1150 sols from all cards. Core is clocked between 1950-2000. Power limit is 78. Temp limit 73. Memory +400. Fan speed 75% fixed. Cards temps are between 63-67 degrees Celsius and 93-95W power usage. Any advise to improve performance and/or reduce temps would be appreciated.
|
|
|
|
|
|
SS2006
|
|
June 28, 2017, 07:23:49 AM |
|
no.. how can i do that?
Ehm... Read OP?) I did, its not too clear says: Version 0.33b Added option --fee developer fee control. so i can just add --fee 0? |
|
|
|
|
iVah1d
Newbie
Offline
Activity: 41
Merit: 0
|
|
June 28, 2017, 07:46:14 AM |
|
What is your reject rate?
[/quote]
about 4-5 rejected (max). and 100+ accepted shares (per hour)
|
|
|
|
|
|
|
|
dukas93
|
|
June 28, 2017, 08:37:18 AM |
|
 Hi everyone, since yesterday my small rig get this issue and I could not find any solution for this. Could anyone please help me to get this to run stable, my rig is on for about 1 month and never got this issuse until yesterday. Thanks in advance. PS: Sorry for the bad image quality. Feeling lost right now. |
|
|
|
|
