not sure they can do that make a 18-19 inch rack mountable unit due to with or length of mobo.
the wire shelf systems with 24 inch wide 14 inch deep 72 inch tall look perfect.
agreed, they would need to change the exterior width dimension of the case by ~21mm from 503.5mm to 482.6mm to get it to fit, and judging from the pictures the mobo is already a tight fit.
yep, looks that way.
It would be an interesting engineering exercise to see how many GPUs they could fit in a standard 2U full depth (87.3mm high x 445.5mm wide x 730.2 mm deep) enclosure. This would fit in a standard datacenter rack (dimensions taken from an HP DL380G9 without a bezel).
it is not about the case. the mobo is a perfect fit in the case
left side ___________________________ right side
has 2 usb has 7 pcie jacks
2 hdmi
1 ethernet
1 power button ___________________________
all jacks are soldered to mobo and fit the case perfectly very good quality fit and finish
to shrink to fit a 19 inch rack you need a 6 card mobo
now a six card mobo could be much less width say 16 inches
make the unit tall make the heat sinks taller
and you could have 92mm fans but that is a completely different model and idea. I am not sure it is any good.
the wire shelf can be modded with walls on the sides and small holes for the wires
you could even make the wire shelf sides 24 or 30 inches
that would allow for more fans to attach to the shelving for better air flow in the building.
BTW picture a sliding door with a rack pointed at it .
a home could mine 96 gpus easy
72 by 24 by 14 wire rack
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F8iXvb0i.png&t=665&c=OOI_WN7AyGauqg)
basement sliding door
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2Fz2M7JBi.jpg&t=665&c=2gvkTipRzqXxKQ)