▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂

[JaredKaragen]

What did I wrong?
Set up L3+
user: 16pymM2oKg6cFgkmqkAFCYFPtpzHCJ9j15
pass: c=BTC,d=128000

Why payout was made to BCH (same address, but not mine) not to BTC?
Understand, that not possible to return, but how can I start receiving to my address?

put a support ticket, if it happens quick enough, he can swap payout currency to BTC.

also, try generating a new RX address, and see if it has a problem with BCH again...

All you have to do is connect your miner and get one-2 shares, then view the wallet page, it will say it at the top on the payout totals table, it will say BTC or BCH.

Ive asked him about this scenario before, and found out that its the pool code having a mind of its own sometimes.  completely unexplainable as to why it will sometimes default/change to BCH.

i changed my address to http://zpool.ca/?address=1PcwSpQCSEpTizFKLYB5yf53o9mVDPMP83
but it again recognize as BCH
I didn't find place to open ticket.
Will try to find someone in chat https://discordapp.com/channels/376790817811202050/382162123192795136

the link was at the very bottom of the mainpage:  https://discord.gg/n45n6Jj

Hi.
How to fix?





I want to receive payments in GBX (gobyte)

Thank you.

I'm having a similar issue.  Moved over from Nicehash when it went down and have been trying to get my machines back up and running ever since. 
Installed Awesome Miner and pointed it to Zpool, fired it up and all looked great until I saw that the site reported that I was earning BCH not BTC. 
Not sure where the currency is specified, but I want to be paid in BTC not BCH.

Can anyone help?

see:  http://zpool.ca/?address=1HrMPhbKT2droKxfjocc65SPvrCyy1yQcs

field pass c=BTC

Can you post a screenshot of where in the miner software I need to add the command line ?

coin selection is via the password.  c=BTC  means you request payout of BTC.

pohval:  if you didn't initially use a c=<payout coin> when mining;  make a second attempt;  with a newly generated address, using the correct password flags.  I.E. c=BTC,scrypt as an example.   Your password should contain at least 2 variables:  "c=" and the algo type(s) you are mining; separated by a comma with no spaces.  When you connect, wait for ~10-20 accepted shares, and check the wallet page for what it says your earned coin type is.  This way minimal hash is wasted in the retry.

If this second try fails, go to the zpool.ca mainpage, scroll to the bottom, and get support letting them know you need the correct coin type assigned to your payout address. (most likely it will end up having to be a newly generated address if the others can't be changed due to exchange processes that already happened.  Can't reverse it once the exchange process happens [to my knowledge].)

[1715480701]

1715480701

[1715480701]

1715480701

[1715480701]

1715480701

[millsys]

12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ

[Sityl]

12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ

I did, but it was "caught up," afterwards.  There ended up being no gap, it just slowly worked through the coins mined from 2+ hours, and is now down to 20 minutes behind (which is normal for me).  I am still seeing the same gap as you in the graph, but there was no missed time in the "last 50 Earnings" tab, all the work done got kinda mashed into the graph after the gap.

[JaredKaragen]

12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ

I did, but it was "caught up," afterwards.  There ended up being no gap, it just slowly worked through the coins mined from 2+ hours, and is now down to 20 minutes behind (which is normal for me).  I am still seeing the same gap as you, but all the work done got kinda mashed into it all after the gap.

This is why the wallet page came up with a text warning about the frontend being offline for upgrades.
Now that everything is back up;  I know my miners never got disconnected the entire time; and are not showing on the right pane as connected, but the hashrate is clearly seen on the left....   reboot the miner or miner app andit will be as normal.  this is a common yiimp bug.

notice profitability caught up and found blocks can be explored on the pool status page....


If the pool is accepting work from you, that work is being recorded.   

When payouts are processed, the frontend automatically shuts down to allocate resources to make sure the payments are processed properly and efficiently.



Hope it helps guys.

[millsys]

Actually drawing a diagonal line indicates I'm probably missing 2.25 hours of hashes... Recommend others draw similar lines on their graph if they have consistent hashing like an ASIC S9 and see if they miss the end target for the consistent rise...

https://imgur.com/a/F5ROF

[Buguito]

I'm having the same issue with ZPool and Nemosminer. The ccminer command parameters shows a perfect -p c=btc, nevertheless, zpool decided to payme in BCH.

Anyone else?

Hi.
How to fix?

https://s2.postimg.org/48vtaaa6h/555.jpg

https://s2.postimg.org/xzixvqpxl/333.jpg

I want to receive payments in GBX (gobyte)

Thank you.

I'm having a similar issue.  Moved over from Nicehash when it went down and have been trying to get my machines back up and running ever since. 
Installed Awesome Miner and pointed it to Zpool, fired it up and all looked great until I saw that the site reported that I was earning BCH not BTC. 
Not sure where the currency is specified, but I want to be paid in BTC not BCH.

Can anyone help?

see:  http://zpool.ca/?address=1HrMPhbKT2droKxfjocc65SPvrCyy1yQcs

field pass c=BTC

[JaredKaragen]

Actually drawing a diagonal line indicates I'm probably missing 2.25 hours of hashes... Recommend others draw similar lines on their graph if they have consistent hashing like an ASIC S9 and see if they miss the end target for the consistent rise...

https://imgur.com/a/F5ROF

those steeper ripples are proof of it catching up;  notice how linear the rest of the graph is at the beginning, none of those ripples...........  Its just delayed earnings posting as all as the DB catches up.

I'm having the same issue with ZPool and Nemosminer. The ccminer command parameters shows a perfect -p c=btc, nevertheless, zpool decided to payme in BCH.

Anyone else?

Please...... scroll up....................... Post #3030........................................................

[millsys]

Actually drawing a diagonal line indicates I'm probably missing 2.25 hours of hashes... Recommend others draw similar lines on their graph if they have consistent hashing like an ASIC S9 and see if they miss the end target for the consistent rise...

https://imgur.com/a/F5ROF

those steeper ripples are proof of it catching up;  notice how linear the rest of the graph is at the beginning, none of those ripples...........  Its just delayed earnings posting as all as the DB catches up.

I'm having the same issue with ZPool and Nemosminer. The ccminer command parameters shows a perfect -p c=btc, nevertheless, zpool decided to payme in BCH.

Anyone else?

Please...... scroll up....................... Post #3030........................................................

Jared those are NOT STEEPER RIPPLES, they match similiar ripples earlier in the day, if they were steeper, the end of the graph wouldn't be 1/4" lower than the avg line I drew in photoshop because it would have stair stepped up enough to catch up with the avg line I drew....  The outage was large enough and the hashing was powerful enough (S9 Antminer) to clearly show zpool DID NOT compensate my wallet properly...

[JaredKaragen]

the line is lower because of the delay in processing.   It's called an offset.  take your diagonal line, offset it down to the end of the flat spot... look, its going up MUCH steeper in more than one place, especially at the end.




On a lighter note I wanted to give congratulations:
The round of small TX payments were sent a little bit ago.  I checked the txID and holy crap has zpool grown:
https://live.blockcypher.com/btc/tx/02e3f0d73adda1b45fba244d4eb343b76fdaeaac09a2a8d422802e4daf369c26/
10.9BTC transacted

0.1BTC in network fees paid by the pool.

Keep up the good work =)   I know there have been problems, but I will be patient as I have always been... there are always setbacks in life, what matters is if/how they are handled.

[Jack_Pot]

12/10 : Anyone else lose 2.25 hours of revenue today while zpool front end was down but pool was accepting hashes?

https://imgur.com/PTIw9hQ

Everyone scrypt miners not only lost 2.25 hours, but also lost some profit by increasing fee

[ihagame]

What happens to the DCR algorithm? I exploit the DCR algorithm with a BTC wallet but my wallet is still zero
Is there my link wallet http://zpool.ca/?address=1FaW75D85kWYZzoLLMu5gYgLciA1CmGGqX

[gloomik]

Why you turned off GoByte on your server?

[aarons6]

What happens to the DCR algorithm? I exploit the DCR algorithm with a BTC wallet but my wallet is still zero
Is there my link wallet http://zpool.ca/?address=1FaW75D85kWYZzoLLMu5gYgLciA1CmGGqX

looks like you have found no blocks.. and have 11% of the shares.. so keep mining dcr and when you find a block you will get a good size chunk of it.

[SeregaMo]

Hello! Please tell me, 24h profit this pool by l3+? Today, yesterday?

[aarons6]

to all of the newbies coming from nicehash..

this pool is not like nicehash.. yes it pays out in bitcoin like nicehash did.. but..

in order to get paid, the pool has to..

1, find a block.. this could actually take a long time..
2, wait for that block to confirm.. again takes awhile..
3, send the coins from that block to an exchange
4, exchange those coins to bitcoin
5, bring the coins back to the pool wallet..

than you get paid..

so when you look at your balance.. if any of the blocks on the bottom say, immature or exchange and not completed.. those blocks ARE NOT COUNTED IN YOUR TOTAL.. at least not yet.. they will be.. it could take awhile.

so if you go hours or a whole day mining and your total hasn't gone up, check those blocks and see how many are being exchanged, for possibly tomorrows total.

[kakavlya]

Hello,

Seems I have an issue with NIST5, my mining rig produces 304MH/s all are accepted, in Zpool wallet view only 10MH/s are reported. Correspondingly I got paid very low too

Same issue here, miner says that i have 157Mh/s, but web interface display only 7Mh/s.
Are there display errors on website or i should switch to another algo ?
Thanks

[Add1ct3ddd]

Pretty sure nist5 coin is broke, difficulty never goes up, thousands of shares, and the site is reporting around 1/4 hashrate that I'm getting.

[arikatamo]

Hello,

Seems I have an issue with NIST5, my mining rig produces 304MH/s all are accepted, in Zpool wallet view only 10MH/s are reported. Correspondingly I got paid very low too

Same issue here, miner says that i have 157Mh/s, but web interface display only 7Mh/s.
Are there display errors on website or i should switch to another algo ?
Thanks

Same problem ( in miner 100MH/s on the site 3-10mh/s

[arikatamo]

Skein have the same problem. Miner = 800 MH  / Site = 50MH

[Lumikor]

It shows me the wrong currency, I'm using BTC wallet with -p c=BTC in awesome miner. But website shows me as BCH.

http://www.zpool.ca/?address=1GhcVobvFPB9odReep3Nn7UHgbB8Z7Nxnt