▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂

[aarons6]

@crackfoo

can you lower the min difficulty on scrypt and sha256 for the compac and moonlander people?

I'd really rather not. Perhaps you can setup your own proxy and proxy them all through the one connection?

i dont think that would do any good.

perhaps make a low diff port specific to them?

the moonlanders need about diff 1024 and the compacs are diff 64 or 128.

at 32768 the compacs can go over an hour without sending in a share.

[1715255921]

1715255921

[1715255921]

1715255921

[1715255921]

1715255921

[1715255921]

1715255921

[GoRdiE]

Hi, A few days ago I included the -p c = BTC in the miner, but I still get the following message

https://imgur.com/V6Ugok5

And the miner is:

https://imgur.com/lnC06UN

Any solutions?

Regards

[malthrax]

Hi, A few days ago I included the -p c = BTC in the miner, but I still get the following message

https://imgur.com/V6Ugok5

And the miner is:

https://imgur.com/lnC06UN

Any solutions?

Regards

There should NOT be any SPACES in the string.   "-p c=BTC"  not  "-p c = BTC"


Please post the COMPLETE command-line you're running.

[garandhero]

I am getting a ton of rejected shares when mining Keccak?
The error is

"reject reason: Low Difficulty Share"

This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)

Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA

This is my .bat file;

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"

Am I doing something wrong? Why so many rejects (literally 50%)

[Peasantfarmguy]

I moved over from the UBN thread

I read through the website, and didn't see a FAQ.  I'm trying to understand this.

So I setup an anonymous miner using ... a btc address?  Not the wallet address you are mining?
The pool converts the mining to BTC and pays to the miners username / which is the BTC address?

You can ask for payout in any currency the pool mines, although if the pool has not got enough to pay you when
it comes to payout time you have to wait until it does.

The pool can always pay BTC because it exchanges other coins for BTC but it normally never exchanges BTC into anything else
(I think there is a current exception for LTC)

You set what you want to be paid in by having your password contain "c=XXX" where XXX is the currency you want
usually it would be c=BTC.

The important bit is that the address you mine to matches the currency you ask for in the c=XXX field
or else your mining payments can just vanish into a wallet you have no way to get to.

Note that for BTC payments the pool kindly pays all the tranaction fees, so you get the full amount the web page says.
I do not know if this is true for other currencys.

So i am mining with one D3 and on wallet address i put bittrex XVG wallet address and changed symbol to XVG. but when I search my wallet address on zpool it shows UNO coin and not XVG. Please help thank you

[crackfoo]

I moved over from the UBN thread

I read through the website, and didn't see a FAQ.  I'm trying to understand this.

So I setup an anonymous miner using ... a btc address?  Not the wallet address you are mining?
The pool converts the mining to BTC and pays to the miners username / which is the BTC address?

You can ask for payout in any currency the pool mines, although if the pool has not got enough to pay you when
it comes to payout time you have to wait until it does.

The pool can always pay BTC because it exchanges other coins for BTC but it normally never exchanges BTC into anything else
(I think there is a current exception for LTC)

You set what you want to be paid in by having your password contain "c=XXX" where XXX is the currency you want
usually it would be c=BTC.

The important bit is that the address you mine to matches the currency you ask for in the c=XXX field
or else your mining payments can just vanish into a wallet you have no way to get to.

Note that for BTC payments the pool kindly pays all the tranaction fees, so you get the full amount the web page says.
I do not know if this is true for other currencys.

So i am mining with one D3 and on wallet address i put bittrex XVG wallet address and changed symbol to XVG. but when I search my wallet address on zpool it shows UNO coin and not XVG. Please help thank you

What’s your address?

[Peasantfarmguy]

I moved over from the UBN thread

I read through the website, and didn't see a FAQ.  I'm trying to understand this.

So I setup an anonymous miner using ... a btc address?  Not the wallet address you are mining?
The pool converts the mining to BTC and pays to the miners username / which is the BTC address?

You can ask for payout in any currency the pool mines, although if the pool has not got enough to pay you when
it comes to payout time you have to wait until it does.

The pool can always pay BTC because it exchanges other coins for BTC but it normally never exchanges BTC into anything else
(I think there is a current exception for LTC)

You set what you want to be paid in by having your password contain "c=XXX" where XXX is the currency you want
usually it would be c=BTC.

The important bit is that the address you mine to matches the currency you ask for in the c=XXX field
or else your mining payments can just vanish into a wallet you have no way to get to.

Note that for BTC payments the pool kindly pays all the tranaction fees, so you get the full amount the web page says.
I do not know if this is true for other currencys.

So i am mining with one D3 and on wallet address i put bittrex XVG wallet address and changed symbol to XVG. but when I search my wallet address on zpool it shows UNO coin and not XVG. Please help thank you

What’s your address?

DPdeA9PSFF1VeBqJu5khwfagXyCUebvgaV

[crackfoo]

Fixed

[spider703]

I am getting a ton of rejected shares when mining Keccak?
The error is

"reject reason: Low Difficulty Share"

This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)

Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA

This is my .bat file;

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"

Am I doing something wrong? Why so many rejects (literally 50%)

probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #Keccak

[guytechie]

689 miners with a total of 344.1 MH/s?  I think something is wrong with the stratum.  Restart?

I think we may need rolling daily bounces of the stratum (stratums?  strati?)

Nist5 and X17 were having the same kind of problem yesterday.

Yeah, I think I'm going to take a break from zpool for a bit.  Hopefully crackfoo will get around to it soon.

[malthrax]

689 miners with a total of 344.1 MH/s?  I think something is wrong with the stratum.  Restart?

I think we may need rolling daily bounces of the stratum (stratums?  strati?)

Nist5 and X17 were having the same kind of problem yesterday.

Yeah, I think I'm going to take a break from zpool for a bit.  Hopefully crackfoo will get around to it soon.

Maybe he'll raise the pool fees to 5% and hire some off-shore Indian 24x7 phone support for us    

[GoRdiE]

Hi, A few days ago I included the -p c = BTC in the miner, but I still get the following message

https://imgur.com/V6Ugok5

And the miner is:

https://imgur.com/lnC06UN

Any solutions?

Regards

There should NOT be any SPACES in the string.   "-p c=BTC"  not  "-p c = BTC"


Please post the COMPLETE command-line you're running.

No spaces.. sorry

ccminer.exe  -a x17 -o stratum+tcp://x17.mine.zpool.ca:3737 -u <my wallet> -p c=BTC -b 0.0.0.0:4028

[garandhero]

I am getting a ton of rejected shares when mining Keccak?
The error is

"reject reason: Low Difficulty Share"

This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)

Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA

This is my .bat file;

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"

Am I doing something wrong? Why so many rejects (literally 50%)

probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #Keccak

Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..

Am I in the right/wrong spot?
Where should I be navigating?


I'm also getting a ton of rejected shares on Lyra2z; "Reject Reason: Invalid Job."

[spider703]

I am getting a ton of rejected shares when mining Keccak?
The error is

"reject reason: Low Difficulty Share"

This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)

Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA

This is my .bat file;

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"

Am I doing something wrong? Why so many rejects (literally 50%)

probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #Keccak

Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..

Am I in the right/wrong spot?
Where should I be navigating?

yes

[crackfoo]

We need Crown Coin (CRW) to be added to zpool as soon as pissible

crown is having chain issues atm.

[garandhero]

I am getting a ton of rejected shares when mining Keccak?
The error is

"reject reason: Low Difficulty Share"

This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)

Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA

This is my .bat file;

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"

Am I doing something wrong? Why so many rejects (literally 50%)

probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #Keccak

Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..

Am I in the right/wrong spot?
Where should I be navigating?

yes

Haha, yes what? Can you help a bit more - i don't see "keccak" in that file at all?

[spider703]

I am getting a ton of rejected shares when mining Keccak?
The error is

"reject reason: Low Difficulty Share"

This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)

Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA

This is my .bat file;

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"

Am I doing something wrong? Why so many rejects (literally 50%)

probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #Keccak

Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..

Am I in the right/wrong spot?
Where should I be navigating?

yes

Haha, yes what? Can you help a bit more - i don't see "keccak" in that file at all?

look in what files there is a marked Kessak and there change

[garandhero]

I am getting a ton of rejected shares when mining Keccak?
The error is

"reject reason: Low Difficulty Share"

This is happening on my 2 rigs (1 with 1060's, the other w/ 1070's)

Here is my stats page;
http://www.zpool.ca/?address=3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA

This is my .bat file;

powershell -version 5.0 -noexit -executionpolicy bypass -windowstyle maximized -command "&.\multipoolminer.ps1 -wallet 3C4DZ5aGsvtgsdGs7XpMbbV3KGus1A84LA -username garandhero -workername rig1060 -region usa -currency btc,usd -type nvidia -poolname zpool -algorithm neoscrypt,decred,equihash,groestl,lbry,neoscrypt,sib,lyra2re2,lyra2z,blake2s,nist5,skunk,skein,mygr,keccak -interval 300 -donate 24 -watchdog"

Am I doing something wrong? Why so many rejects (literally 50%)

probably need to open a file ccminer.ps1 which digs the given algorithm and correct it on "keccak" = " -m 2 -i 20" #Keccak

Might need a little more help on this....I use multipool miner; I found in the API's folder a ccminer.ps1 file; when I enter to edit id I don't see keccak or anything anywhere..

Am I in the right/wrong spot?
Where should I be navigating?

yes

Haha, yes what? Can you help a bit more - i don't see "keccak" in that file at all?

look in what files there is a marked Kessak and there change

OK Nevermind, we're good I found it and made the changes you suggested and we're good!!

However, now I am getting lots of rejected shares on Lyra2z....any suggestions on that one?
The message is "reject reason: invalid job id"

About 50% of shares are rejected.

[guytechie]

689 miners with a total of 344.1 MH/s?  I think something is wrong with the stratum.  Restart?

I think we may need rolling daily bounces of the stratum (stratums?  strati?)

Nist5 and X17 were having the same kind of problem yesterday.

Yeah, I think I'm going to take a break from zpool for a bit.  Hopefully crackfoo will get around to it soon.

Maybe he'll raise the pool fees to 5% and hire some off-shore Indian 24x7 phone support for us  

Maybe.  But taking a break is probably more reasonable.

[JNelsen]

Fixed

Hey crackfoo

Can you fix mine as well?  I used my Verge (XVG) address with the correct -p c=XVG but the wallet shows as UNO in your pool

My address is DA7twwUYGg4BqWgsCoEN3aT2pyEwop7hN4


Thanks in advance.