▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰]⫸⫷[!Paying 10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸▇▆▅▃▂

[gocontix]

Is there a problem with the equihash pool?
Rig is hashing but the front-end doesn't report any current coins being mined (last exchanged 110 minutes ago), and the graph has looked erratic (flat, steep upwards, flat etc) to completely flat for over two hours now...

Problems also on QUARK and QUBIT. Very low hashrate, lots of reject..

[crackfoo]

Is there a problem with the equihash pool?
Rig is hashing but the front-end doesn't report any current coins being mined (last exchanged 110 minutes ago), and the graph has looked erratic (flat, steep upwards, flat etc) to completely flat for over two hours now...

Problems also on QUARK and QUBIT. Very low hashrate, lots of reject..

didnt see anything out of the ordinary.

I've reset those stratums just in case.

Also noticed that my IP banning wasn't activated and saw a lot of blocked accounts flooding. That's taken care of now too.

[nostrakhan]

@crackfoo,

Do you think you will add Solaris Xevan (XLR)?

I'm appreciative of Zpool, you do a nice job. Cheers. 

[crackfoo]

@crackfoo,

Do you think you will add Solaris Xevan (XLR)?

I'm appreciative of Zpool, you do a nice job. Cheers. 

I will when the exchanges update their wallets to the new chain.

[Zakharov_And]

Hi.
Why is it so long is the exchange for BTC in sha256 algorithm?
Previously, it was much faster...

I have a S9.
Could this depend on?
- the password field is written c=BTC
- accepted=460, discarded=7900, getworks=1450
- written #xnsud

[sundownz]

Last few days I am having a ton of workers "hang" on stats on algos they aren't working on anymore. I am using NEMOS 2.2 for algo switching.

Everything still working okay but figured I would report.

[D3legacy]

I imagine, that those numbers:
Verge (lyra2v2)   1560.410948 XVG   7.368 k   1 577 830 (2%)   41 mins   -   0.00318
Unitus (lyra2v2)   31.80890638 UIS   7.496 k   1 157 806 (0%)   42 mins   12.6 GH/s   0.00020
MobileCash (lyra2v2)   20.2 MBL   930.327   1 042 248 (46%)   5 mins   12.6 GH/s   0.00005
telling what profitable specific coin is. And for single algorithm higher number means higher profitability (linear). And following this, when 'stratum' picks less profitable coin, pool earns less. For me it looks like pool picks coins randomly - most profitable and less profitable too. Someone asked about that before in this topic.
Maybe I dont understand it well

well youre pretty wright, thats the reason i dissabled that algo

[JaredKaragen]

Last few days I am having a ton of workers "hang" on stats on algos they aren't working on anymore. I am using NEMOS 2.2 for algo switching.

Everything still working okay but figured I would report.

it's not a pool issue...... fyi

[guytechie]

Did anyone else received a payout today before hitting the 0.015 BTC threshold?

I just did.  I was wondering what just happened - is it Sunday?  No... it's Friday, I'm sure of it!

[nostrakhan]

Did anyone else received a payout today before hitting the 0.015 BTC threshold?

I just did.  I was wondering what just happened - is it Sunday?  No... it's Friday, I'm sure of it!

I think minimum payout got changed to .0075

[JaredKaragen]

yup.  main page has been updated:

"Payouts are made automatically every 2 hours for all balances above 0.0075 and balances more than 0.0015 are paid on Sunday. DCR requires min of 0.025 before payout will occur."

[guytechie]

Good to know, thanks!

[STSMiner]

Crackfoo,

Are there any plans to add Bitcoin Gold to the pool to mine ?

[kabom]

Hi guys,
i have to ask stupid question.. ( example is taket FatCoin ( symbol - FAT )
This is the simple setup for zpool : stratum+tcp://<algo>.mine.zpool.ca:<PORT>#xnsub -u <WALLET_ADDRESS> [-p c=<SYMBOL>,<OPTIONS>]
this is how my setup would look like: stratum+tcp://x11.mine.zpool.ca:3533#xnsub -u <asdasdasdasdasdasd> [-p c=<FAT>,<OPTIONS>]

and this is how it need to look on d3:
pool :  stratum+tcp://x11.mine.zpool.ca:3533
username: <WALLET_ADDRESS>
password : FAT

.. i'm fine with this setup?

[crackfoo]

Hi guys,
i have to ask stupid question.. ( example is taket FatCoin ( symbol - FAT )
This is the simple setup for zpool : stratum+tcp://<algo>.mine.zpool.ca:<PORT>#xnsub -u <WALLET_ADDRESS> [-p c=<SYMBOL>,<OPTIONS>]
this is how my setup would look like: stratum+tcp://x11.mine.zpool.ca:3533#xnsub -u <asdasdasdasdasdasd> [-p c=<FAT>,<OPTIONS>]

and this is how it need to look on d3:
pool :  stratum+tcp://x11.mine.zpool.ca:3533
username: <WALLET_ADDRESS>
password : FAT

.. i'm fine with this setup?

No. We don’t mine FAT. Use a coin we do mine and the password has to be c=BTC for example for a bitcoin.

[JaredKaragen]

Hi.
Why is it so long is the exchange for BTC in sha256 algorithm?
Previously, it was much faster...

I have a S9.
Could this depend on?
- the password field is written c=BTC
- accepted=460, discarded=7900, getworks=1450
- written #xnsud

Correction;  its #xnsub; maybe you posted a typo

The exchange is long for many reasons:  Either a buyer is needed and not present, the coins haven't matured enough yet (blockchain/wallet stalled? network problems? grossly large amount of confirms needed before it can sell?), etc... there are many reasons why it would take time to get your earnings fully exchanged.   Remember, its working on the principal of others buying.... which there isn't always others buying them all the time.

To maintain proper protocols, the password should be:
c=BTC,sha256

the stratum address needs to have stratum+tcp://sha256.mine.zpool.ca:3333#xnsub to enable it in the S9 from what I recall.

As far as difficulty being set manually;  from memory (i suggest reading back on this thread and the original one to figure out for sure) the diff should be ~16,000

[minerx117]

Last few days I am having a ton of workers "hang" on stats on algos they aren't working on anymore. I am using NEMOS 2.2 for algo switching.

Everything still working okay but figured I would report.

it's not a pool issue...... fyi

you get that after completing benchmarks.. its the left over shares waiting on the pools once blocks are found and your percentages is paid that list should shrink to just your current active miners.... i get that some times when i update to new version and re benchmark all my rigs at once.. after 24hours of mining after benchmarking its back to normal...

Best Regards
Nemo

[minerx117]

i'll tidy up my algo list and miners soon so it doesn't have to run so many benchmarks

[Kstudio]

What's going on when zpool has sent out a payment but is not showing any transaction?

[nostrakhan]

What's going on when zpool has sent out a payment but is not showing any transaction?

I was wondering this also