▂▃▅▆▇⫷[🆉🅿🅾🅾🅻.🅲🅰][BTC LTC DGB RVN FLUX DASH @ the miners multipool ]⫸▇▆▅▃▂

[crackfoo]

Hi,

We have now opened registrations for our hash renting service called HashTap™ (https://www.hashtap.ca/) This service is aimed to be a spec miners paradise allowing you to rent hash on 40+ algorithms from the miners of zpool.ca.  Keep in mind, you can not rent hash from HashTap™ and point it at zpool.ca.  We're in the early stages so please, if you find any issues use the HashTap™ support channel once it's opened up.

Cheers

This is awesome and should bring more miners to the pool I no you have a profit section and I like the new look but I find it harder to figure out which algo is paying the best is there anyway you could add a spot or page that says the most profitable algo for amd and nvidia doesn't have to be a big list just the top 1 or 2 algos this way we dont have to go through all the algos with a calculator

We're working on adding some visual signals to give miners hints as to what algos are performing well on the pool. It still always recommended you also DYOR of course.

Cheers

[MrPlus]

Released NPlusMiner 4.5.6
https://github.com/MrPlusGH/NPlusMiner/releases
https://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.6

Discord: https://discord.gg/2BCqPxe

NPlusMiner with GUI, AutoUpdate, Earnings Tracker and Monitoring

Candidate for AutoUpdate = Yes
       - NPlusMiner checks for updates every 24 hours.
       - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup

ChangeLog

   - Fixed multiple miners running at the same time in some rare cases
   - Fixed Earnings Tracker not taking into account specific pools configuration
   - Miners updates
      - zealotenemy 1.28

[crackfoo]

Hi,

Coins dropped due to cryptopia suspension/hack: $TTY, $NMS, $BSTY, $SKC, $ARC, $SAGA, $ARI, $MARKS, $PLC, $SKR, $RED, $UIS, $TRC, $BLC, $ORE, $PURA, $CNO, $UMO, $GUN, $BCF, $UNIT, $PXC, $PHO, $RBBT, $VPRC
Algos dropped: Dedal, Blakecoin

Please ensure you switch to a valid payout coin ASAP.

Cheers

[sundownz06]

What is the best CPU algo on ZPOOL right now ?

Looking at YESPOWER as of now... I have a LOT of CPU based power available (in addition to GPU of course).

PS : Any way to add a "Total Workers" indicator ? The new GUI is a bit harder to scroll through a ton of workers -- just checking the total # would be an easy first glance if any are down.

[crackfoo]

What is the best CPU algo on ZPOOL right now ?

Looking at YESPOWER as of now... I have a LOT of CPU based power available (in addition to GPU of course).

PS : Any way to add a "Total Workers" indicator ? The new GUI is a bit harder to scroll through a ton of workers -- just checking the total # would be an easy first glance if any are down.

I've been using argon2d-dyn but.... I'm not sure the best one exactly. Just switched to yescryptR8 to get bigger share %.

The total # is currently listed on the graphs as well as the overall % of your shares.

[sundownz06]

What is the best CPU algo on ZPOOL right now ?

Looking at YESPOWER as of now... I have a LOT of CPU based power available (in addition to GPU of course).

PS : Any way to add a "Total Workers" indicator ? The new GUI is a bit harder to scroll through a ton of workers -- just checking the total # would be an easy first glance if any are down.

I've been using argon2d-dyn but.... I'm not sure the best one exactly. Just switched to yescryptR8 to get bigger share %.

The total # is currently listed on the graphs as well as the overall % of your shares.

Great. I'll check that algo as well.

Also... perfect. Didn't notice that for some reason -- just now getting into the new interface of ZPOOL a bit. Been doing other stuff for a while but starting to convert back.

[Inves]

display not working wormery and they are all from sgminer-kl/v1.0. C11. How to fix? there are more and more of them.

[crackfoo]

display not working wormery and they are all from sgminer-kl/v1.0. C11. How to fix? there are more and more of them.

fixed?

[Inves]

display not working wormery and they are all from sgminer-kl/v1.0. C11. How to fix? there are more and more of them.

fixed?

before that, it was that moving to another algorithm (let's say from x11 to x13) x11 disappeared in Miner Summary
dedicated are not working workers

[Inves]

now it is not working the machines became more! and they were all with sgminer-kl/v1.0. and sgminer/5.5.5-gm

maybe it is related to the API?

[aarons6]

can i set the diff on a l3+?
its auto set to 468K and it times out and the pool switches to the backup pool.

[sundownz06]

I am having an issue with my worker stats. Some workers disappear from the list but are still working. They don't show in the list nor in the total counter on the algorithm -- but their hash power is counted.

This is both with NEMOSMINER profit switcher and also stand-alone miner software... T-Rex, Cryptodredge, and WildRig.

[Inves]

I am having an issue with my worker stats. Some workers disappear from the list but are still working. They don't show in the list nor in the total counter on the algorithm -- but their hash power is counted.

This is both with NEMOSMINER profit switcher and also stand-alone miner software... T-Rex, Cryptodredge, and WildRig.

read carefully about the software used. they mine the software developer

[sundownz06]

I am having an issue with my worker stats. Some workers disappear from the list but are still working. They don't show in the list nor in the total counter on the algorithm -- but their hash power is counted.

This is both with NEMOSMINER profit switcher and also stand-alone miner software... T-Rex, Cryptodredge, and WildRig.

read carefully about the software used. they mine the software developer

Indeed. I do know that they mine dev periodically. I mean the worker ID disappears and stays gone -- even for days -- unless I shut down the software for a while and restart it. It's mining to ZPOOL (it shows in total hash rate) but is not displayed in worker list.

[aarons6]

I am having an issue with my worker stats. Some workers disappear from the list but are still working. They don't show in the list nor in the total counter on the algorithm -- but their hash power is counted.

This is both with NEMOSMINER profit switcher and also stand-alone miner software... T-Rex, Cryptodredge, and WildRig.

read carefully about the software used. they mine the software developer

Indeed. I do know that they mine dev periodically. I mean the worker ID disappears and stays gone -- even for days -- unless I shut down the software for a while and restart it. It's mining to ZPOOL (it shows in total hash rate) but is not displayed in worker list.

i hate to break it to you but i constantly get over what the calculators say i should get every time i mine here.

[sundownz06]

I am having an issue with my worker stats. Some workers disappear from the list but are still working. They don't show in the list nor in the total counter on the algorithm -- but their hash power is counted.

This is both with NEMOSMINER profit switcher and also stand-alone miner software... T-Rex, Cryptodredge, and WildRig.

read carefully about the software used. they mine the software developer

Indeed. I do know that they mine dev periodically. I mean the worker ID disappears and stays gone -- even for days -- unless I shut down the software for a while and restart it. It's mining to ZPOOL (it shows in total hash rate) but is not displayed in worker list.

i hate to break it to you but i constantly get over what the calculators say i should get every time i mine here.

I am not questioning returns or anything of the sort... I am asking if there is a known bug or a fix regarding the list of Worker IDs.

In total I have ~130 systems so seeing all the IDs to monitor if they are working is important.

[digital$]

mining sha256 using S9's on Zpool...took me 2 days to get the same amount of profit i get from Nicehash in 24hrs.....profitability has really taken a dive on this pool. 

[crackfoo]

We've added a new mining feature which will allow you to choose the coin(s) you want to mine.

To use this feature, you add the extra option to your password: zap=

Example:

To get paid in BTC and only mine RVN you put this as your password: c=BTC,zap=RVN

or if you want to mine RVN and PHL it would be c=BTC,zap=RVN/PHL

When you are zapping coins, you're opting out of zpool's full algo profit switching and creating your own sudo profit switching, unless of course... you only want to zap one coin.

Mining is still pegged to exchange rates as always. It is sudo solo mining.

We have also now added table views to the wallet page as well as the algo stats pages. Just look for the toggle in the top right of the data boxes

[crackfoo]

I am not questioning returns or anything of the sort... I am asking if there is a known bug or a fix regarding the list of Worker IDs.

In total I have ~130 systems so seeing all the IDs to monitor if they are working is important.

You may need to re-start the miners to pickup the workers again to be displayed.

[JaredKaragen]

I am not questioning returns or anything of the sort... I am asking if there is a known bug or a fix regarding the list of Worker IDs.

In total I have ~130 systems so seeing all the IDs to monitor if they are working is important.

You may need to re-start the miners to pickup the workers again to be displayed.

100% accurate.


Its been a bug thats been around ever since the first weeks of zpool when this new exchange pool code was released.

Restarting the miner app;  has it pop back up on the list.  It is the only solution found thus far, as its a very tough type of bug to track down.

The best way to keep track of your miners is through configuring API access to each one;  and a miner control/monitoring utility/os of some sort; which there are many out there.