Chosscoin
Newbie
Offline
Activity: 40
Merit: 0
|
|
March 16, 2018, 11:54:45 AM |
|
Thanks, I got it. In the Readme file, it appears that NiceHash is normalized with 0.96, what value do you use for Blazepool, Zpool, Zergpool, etc? Thank you
|
|
|
|
k2laci
Member
Offline
Activity: 172
Merit: 10
|
|
March 16, 2018, 12:57:04 PM |
|
1. Guys what to do with miners that haven't gathered full speed and become unprofitable, because of wrong speed calculated? 2. If we run some instanses of Nemo hsr miner calculates MHS not from hsr miner, it calculates mhs from another ccminer xevan then write it to prifits and use wrong stats! http://prntscr.com/irls5fi think its a very bad idea to calculate profits from the current hashrates, because its too difficult to get full speed for an defaults intervals, so all calculating becomes wrong Point 1. Guess it is just a matter of a couple cycles till it figures. Not sure that is a real issue For point 2, this is because NemosMiner does not support running multiple instances. NPlusMiner now does in 2.1.1 : https://github.com/MrPlusGH/NPlusMiner/releasesThe stats folder copy from 2.1 release is available ?
|
|
|
|
MrPlus
|
|
March 16, 2018, 01:01:40 PM |
|
1. Guys what to do with miners that haven't gathered full speed and become unprofitable, because of wrong speed calculated? 2. If we run some instanses of Nemo hsr miner calculates MHS not from hsr miner, it calculates mhs from another ccminer xevan then write it to prifits and use wrong stats! http://prntscr.com/irls5fi think its a very bad idea to calculate profits from the current hashrates, because its too difficult to get full speed for an defaults intervals, so all calculating becomes wrong Point 1. Guess it is just a matter of a couple cycles till it figures. Not sure that is a real issue For point 2, this is because NemosMiner does not support running multiple instances. NPlusMiner now does in 2.1.1 : https://github.com/MrPlusGH/NPlusMiner/releasesThe stats folder copy from 2.1 release is available ? Yes, you can copy your stats folder over. Then it will just benchmark for changed miners.
|
|
|
|
richdmz
Newbie
Offline
Activity: 61
Merit: 0
|
|
March 16, 2018, 06:13:45 PM |
|
sorry if this was asked before, for username and worker for MPH, say you are using miner.1 for MPH, would "miner" be placed for MPH user and "ID=1" for the worker name in the config?
Thanks
|
|
|
|
Minimag47
Newbie
Offline
Activity: 1
Merit: 0
|
|
March 16, 2018, 07:08:23 PM |
|
My rig has a low end cpu for now and has a very hard time when algos switch often. In 2.5.2 I was able to set the mining time pretty easily through the NemosMinerv2.5.1.ps1 file. In 3.0 changing the times in the file have no impact on algo switching times. Is that a function that is simply gone? I have been looking for where it gets the "Sleep" time to increase it beyond 1 minute.
|
|
|
|
MrPlus
|
|
March 16, 2018, 07:24:25 PM |
|
My rig has a low end cpu for now and has a very hard time when algos switch often. In 2.5.2 I was able to set the mining time pretty easily through the NemosMinerv2.5.1.ps1 file. In 3.0 changing the times in the file have no impact on algo switching times. Is that a function that is simply gone? I have been looking for where it gets the "Sleep" time to increase it beyond 1 minute.
Can't repro this. Changing interval does work for me. Anyone else seeing this king of issue?
|
|
|
|
k2laci
Member
Offline
Activity: 172
Merit: 10
|
|
March 16, 2018, 07:41:30 PM |
|
My rig has a low end cpu for now and has a very hard time when algos switch often. In 2.5.2 I was able to set the mining time pretty easily through the NemosMinerv2.5.1.ps1 file. In 3.0 changing the times in the file have no impact on algo switching times. Is that a function that is simply gone? I have been looking for where it gets the "Sleep" time to increase it beyond 1 minute.
Can't repro this. Changing interval does work for me. Anyone else seeing this king of issue? No ! The config option -> interval swichable algo changing time. Who proposes how much switchover time? My interval now : 300 mp
|
|
|
|
JCS-CCT
Jr. Member
Offline
Activity: 154
Merit: 1
|
|
March 16, 2018, 09:39:00 PM |
|
sorry if this was asked before, for username and worker for MPH, say you are using miner.1 for MPH, would "miner" be placed for MPH user and "ID=1" for the worker name in the config?
Thanks
"miner" is your username and "1" is your worker. Drop "ID=" for MPH
|
|
|
|
JCS-CCT
Jr. Member
Offline
Activity: 154
Merit: 1
|
|
March 16, 2018, 09:48:51 PM |
|
My rig has a low end cpu for now and has a very hard time when algos switch often. In 2.5.2 I was able to set the mining time pretty easily through the NemosMinerv2.5.1.ps1 file. In 3.0 changing the times in the file have no impact on algo switching times. Is that a function that is simply gone? I have been looking for where it gets the "Sleep" time to increase it beyond 1 minute.
Interval in the config tab is working for me. I have mine set to 120.
|
|
|
|
MrPlus
|
|
March 16, 2018, 10:56:54 PM |
|
That’s been a crazy month with a lot of new features added to NPLusMiner. With the number of releases in the 30 days, I’m sure some of you are fed up with updating their rigs to new versions. I did have to rewrite most of the code to make all these good new features possible but we’re getting to a point where the features I wanted are implemented and NPlusminer is stable. I do have more to come to make people’s life easier, but I will try to slow down on the number of release to a maximum of once a week now. Of course, this does concern only new releases and not bug fixes. If needed, bug fixes will be released. Having a life, I cannot set this to any specific day of the week. Let’s just say there will be minimum 7 days between two releases. I would like to thank you all for the great feedback you give here and on GitHub. Keep it coming! This really helps make NPlusMiner better. We’ll continue to work with Nemo to make sure versions are duly tested and we provide the best product we can for your rigs. (or G'Ma computer ) Again, keep the feedback coming. Share ideas. help shape the next version. Thank you! https://github.com/MrPlusGH/NPlusMiner/releases
|
|
|
|
primo1983
Newbie
Offline
Activity: 72
Merit: 0
|
|
March 17, 2018, 04:36:48 AM |
|
NemosMiner locking the after msi is always stuck I'm going crazy with NemosMiner, low overclock, for being GTX 1080 IT, with Ipu cpu I3 8GB memory Has anyone ever experienced this? look, it's locking the fan curve of MSI AFTER that I set up https://prnt.sc/isci88https://prnt.sc/isci88fan curves https://prnt.sc/iscjal
|
|
|
|
minerx117 (OP)
Sr. Member
Offline
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
|
|
March 17, 2018, 05:06:53 AM |
|
NemosMiner locking the after msi is always stuck I'm going crazy with NemosMiner, low overclock, for being GTX 1080 IT, with Ipu cpu I3 8GB memory Has anyone ever experienced this? look, it's locking the fan curve of MSI AFTER that I set up https://prnt.sc/isci88fan curves https://prnt.sc/iscjalhi primo1983 I also used to run into lots of problems using "MSI AFTERBURNER" to fix this i stopped using "MSI AFTERBURNER"... I use http://download.gigabyte.us/FileList/Utility/vga_xtreme_engine_setup_1.25.exe never had a problem after that... Best Regards Nemo
|
NemosMiner-v3.8.1.3
|
|
|
Raziel666
Newbie
Offline
Activity: 63
Merit: 0
|
|
March 17, 2018, 07:21:25 AM |
|
Can somebody explain to me the difference between Interval and StatsInterval?
Is there an optimal value? I see that by default StatsInterval is 300 seconds and Interval 60 seconds.
|
|
|
|
Just_a_miner
Jr. Member
Offline
Activity: 325
Merit: 2
|
|
March 17, 2018, 12:06:18 PM |
|
I'm using NemosMiner 2.5.2 with 4 GTX 1050ti cards. All mining software work well, except for the sick, buggy-as-hell hsrminer... It just brought me persistent headache while crashing all the time and needs infinite attempts for configuring it at a stable manner... Feels like the lousy kid in the family! Please, get rid of it and use a well-configured edition of ccminer for Neoscrypt along with PhoenixMiner for ethereum mining... Keep up the good work! Your persistent headache came from too much overclocking of your 1050ti gpus. Hsrminer_neoscrypt_fork doesn't crash by itself, it's your GPU that can't handle high OC and high load from high process priority version of the miner. Multi-algo scripts like MrPlus' one and Nemos download and use hsrminer_neoscrypt_fork_ hp.exe - it's high priority version of my fork, and it clearly states that "You will get more hashrate, but also high load on GPUs! If you have troubles with it - use normal process priority version (or specify -c 2 for this version)". And many new users don't have a clue about hardware and how to properly use it, so they just overclock their gpu to high values AND reduce PL%, and press button to start miner - then "all of a sudden" gpu become unstable under high load and crash - time to blame software! You can make changes to script so it will download normal process priority version to lower GPU's load. If you still have problems with hsrminer_neoscypt_fork, post questions to my topic, I will help you.
|
More Epochs Mod of Claymore ETH Miner v15: Epochs 385+ works now! https://bitcointalk.org/index.php?topic=5305046
|
|
|
|
tionart
Newbie
Offline
Activity: 9
Merit: 0
|
|
March 17, 2018, 04:56:44 PM |
|
hi, i am trying to figure out why nemos 2.4 and 3 and now nplus is doing this, i think i tried everything all those versions hundred bachmarks and profit resets as you see on picture the most profitable coin/algo doesn't start , its stuck but sometimes it does change, i also used old versions but as i remember i didn't have those problems https://imgur.com/a/75FXbi would really appreciate help
|
|
|
|
MrPlus
|
|
March 17, 2018, 05:34:41 PM |
|
Looks like ccminer fails and we're trying to restart it every 30 seconds. Copy the ccminer command line in the console and run it from command line. See what the exact error is.
|
|
|
|
MrPlus
|
|
March 17, 2018, 05:38:33 PM |
|
hi, i am trying to figure out why nemos 2.4 and 3 and now nplus is doing this, i think i tried everything all those versions hundred bachmarks and profit resets as you see on picture the most profitable coin/algo doesn't start , its stuck but sometimes it does change, i also used old versions but as i remember i didn't have those problems https://imgur.com/a/75FXbi would really appreciate help Reduce ActiveMinerGain% Try with 0, you'll see it switch.
|
|
|
|
primo1983
Newbie
Offline
Activity: 72
Merit: 0
|
|
March 17, 2018, 05:44:01 PM |
|
Looks like ccminer fails and we're trying to restart it every 30 seconds. Copy the ccminer command line in the console and run it from command line. See what the exact error is. C:\Users\Rig1\Desktop\NemosMiner-master\Bin> NVIDIA-Alexis78xevan\ccminer_x86.exe -b 4068 -a xevan -o stratum+tcp://xevan.mine.ahashpool.com:3739 -u 1FJ67bzAa4V3Sf8S7EH4dB -p ID=NemosMiner-v3.0,c=BTC -d 0,1,2,3,4,5,6,7,8 --api-remote *** ccminer krnlx-xevan for nVidia GPUs from alexis78@github *** *** Built with VC++ 2013 and nVidia CUDA SDK 9.0 (Not recommended prefer 7.5) *** Based on tpruvot@github ccminer *** Originally based on Christian Buchner and Christian H. project *** Include some of the work of djm34, sp, tsiv and klausT. [2018-03-17 14:43:07] Non-existant CUDA device #8 specified in -d option C:\Users\Rig1\Desktop\NemosMiner-master\Bin>
|
|
|
|
manc
Newbie
Offline
Activity: 84
Merit: 0
|
|
March 17, 2018, 05:52:40 PM |
|
Why are we using port 17025 for zcoin @ MPH? Should be 20581...?
|
|
|
|
|