prvs
Newbie
Offline
Activity: 52
Merit: 0
|
 |
April 15, 2018, 07:37:18 PM |
|
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards. The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.
I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5...
|
|
|
|
ubergod
Newbie
Offline
Activity: 3
Merit: 0
|
 |
April 15, 2018, 11:31:56 PM |
|
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards. The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.
I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5... Stoping and restarting does not fix the issue for me.
|
|
|
|
squashen
Member

Offline
Activity: 61
Merit: 10
|
 |
April 16, 2018, 02:37:32 AM |
|
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards. The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.
I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5... Stoping and restarting does not fix the issue for me. Try stop, save config, restart the hole program. I have to do some times for other reasons.
|
|
|
|
muilfa
Newbie
Offline
Activity: 41
Merit: 0
|
 |
April 16, 2018, 05:55:17 AM |
|
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards. The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.
Stop Nemos, close and start again. It helps me so much. Try restarting Benchmark
|
|
|
|
prvs
Newbie
Offline
Activity: 52
Merit: 0
|
 |
April 17, 2018, 09:03:46 AM |
|
Where can I change the port of the mining for the algorithm in the settings?
|
|
|
|
|
MrPlus
|
 |
April 17, 2018, 12:52:48 PM |
|
A couple possible reasons: 1 - Zergpool is reporting wrong data through the API. It will correct over time. (This happens some time) 2 - Zergpool reviewed estimated values and your total earned goes down. (In this case you should see it on Zergpool website)
|
|
|
|
|
MrPlus
|
 |
April 17, 2018, 12:54:47 PM |
|
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards. The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.
I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5... This problem at first start will be fixed in the next version of NPlusMiner.
|
|
|
|
Bit2017User
Jr. Member
Offline
Activity: 76
Merit: 1
|
 |
April 17, 2018, 11:26:30 PM |
|
Hello For me on zerg:3663 x16s is failing on 1080Ti with the master from 2 days ago. Thanks
|
|
|
|
Sackl
Jr. Member
Offline
Activity: 61
Merit: 4
|
 |
April 18, 2018, 11:31:13 AM |
|
Hello For me on zerg:3663 x16s is failing on 1080Ti with the master from 2 days ago. Thanks
Are the Cards overclocked ? With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable. Even on Reference-Style 1080 TI & 1070 TI
|
|
|
|
Bit2017User
Jr. Member
Offline
Activity: 76
Merit: 1
|
 |
April 18, 2018, 03:33:46 PM |
|
Hello For me on zerg:3663 x16s is failing on 1080Ti with the master from 2 days ago. Thanks
Are the Cards overclocked ? With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable. Even on Reference-Style 1080 TI & 1070 TI Thanks Will try to reduce a bit, they are at 75+300 Will see
|
|
|
|
JCS-CCT
Jr. Member
Offline
Activity: 154
Merit: 1
|
 |
April 18, 2018, 06:15:11 PM |
|
Hello For me on zerg:3663 x16s is failing on 1080Ti with the master from 2 days ago. Thanks
Are the Cards overclocked ? With Version 3.1 i had to reduce my Afterburner Settings to +100 Core to get it stable. Even on Reference-Style 1080 TI & 1070 TI Thanks Will try to reduce a bit, they are at 75+300 Will see Try 80/50/600 This may help: https://github.com/MrPlusGH/NPlusMiner-Documentation/wiki/Overclocking-and-Prerun
|
|
|
|
Bit2017User
Jr. Member
Offline
Activity: 76
Merit: 1
|
 |
April 19, 2018, 07:05:23 AM Last edit: April 19, 2018, 09:54:06 AM by Bit2017User |
|
Thanks Will try to reduce a bit, they are at 75+300 Will see Thanks Moved to 100 power ( no cost for me :-) ) + 50 core and 300 mem. Will see if it's chosen to run again.
|
|
|
|
Lukras
Newbie
Offline
Activity: 91
Merit: 0
|
 |
April 20, 2018, 08:38:44 AM |
|
what needs to be corrected so that cryptonight correctly shows USD/DAY Miner Algorithm Speed mBTC/Day BTC/Day USD/Day BTC/GH/Day Pool ----- --------- ----- -------- ------- ------- ---------- ---- ccminerCryptonight CryptoNightV7 106,09 KH/s 22,740 0,02274 189,441 214,35510 nicehash- ccminerCryptonight CryptoNight 107,43 KH/s 3,184 0,00318 26,529 29,64193 nicehash- ccminerTpruvotcuda9 HMQ1725 6,27 MH/s 0,476 0,00048 3,968 0,07599 zergpool- ccminerAlexis78keccakc Keccakc 995,76 MH/s 0,474 0,00047 3,953 0,00048 zergpool- ccminerAlexis78 Lyra2RE2 53,79 MH/s 0,363 0,00036 3,028 0,00676 zpool- ccminerAlexis78 Hsr 16,73 MH/s 0,346 0,00035 2,885 0,02070 zergpool- ccminerAlexis78 X17 14,59 MH/s 0,312 0,00031 2,602 0,02140 zergpool- ccminerAlexis78x16rx16s X16r 14,30 MH/s 0,301 0,00030 2,510 0,02106 zergpool- DSTM Equihash 643,93 H/s 0,287 0,00029 2,391 445,75098 nicehash- ccminerSuprminer X16s 13,19 MH/s 0,285 0,00029 2,375 0,02162 zergpool- ccminerAlexis78x16rx16s X16s 13,12 MH/s 0,284 0,00028 2,363 0,02162 zergpool- ccminerAlexis78 Skein 678,21 MH/s 0,283 0,00028 2,361 0,00042 zergpool- ccminerKlausT NeoScrypt 1,44 MH/s 0,283 0,00028 2,361 0,19625 zpool-
|
|
|
|
Bit2017User
Jr. Member
Offline
Activity: 76
Merit: 1
|
 |
April 20, 2018, 10:03:18 AM |
|
Thanks Will try to reduce a bit, they are at 75+300 Will see Thanks Moved to 100 power ( no cost for me :-) ) + 50 core and 300 mem. Will see if it's chosen to run again. Sorry, but no X16S still not working on 1080TI and with the latest Suprminer not working on 1050TI Will update to the latest master on 1080TI and try.
|
|
|
|
BitBustah
|
 |
April 21, 2018, 09:04:33 AM |
|
After months of doing nothing I booted the old mining rig.
What happend to the good 'ol Nemos? The GUI version is so laggy. Laggy, not buggy.
Is there a way to turn off the gui?
|
|
|
|
mo35
Member

Offline
Activity: 142
Merit: 10
|
 |
April 21, 2018, 09:52:13 AM |
|
agreed due GUI interference and all the laginess i started to check out MindMiner , they going opposite direction , minimalism , responsiveness and low mem footprint. As much as i liked Nemos , GUI version likes to become nonresponsive , sometimes PS glich out and yeah , its laggy.
|
|
|
|
BitBustah
|
 |
April 21, 2018, 01:27:20 PM |
|
As much as i liked Nemos , GUI version likes to become nonresponsive , sometimes PS glich out and yeah , its laggy.
Same here. Liked Nemos too... but now I switched to Sniffs.
|
|
|
|
sundownz
|
 |
April 21, 2018, 03:50:33 PM |
|
As much as i liked Nemos , GUI version likes to become nonresponsive , sometimes PS glich out and yeah , its laggy.
Same here. Liked Nemos too... but now I switched to Sniffs. Sniffdog lacks the "plus" logic if I understand correctly ? I am testing it out on my home office PC (have also tested NEMO 3.1). I am still on NEMO 2.5.2 on the majority of my systems (around 80 other systems) as I don't care for the GUI... but I would like to have Excavator for NEO and LYRA2.
|
|
|
|
|