[ANN][XCN] Cryptonite - NEW Thread | 1st mini-blockchain coin | Bounties!

[JasonSW]

It seems this is the reason where the sync issue runs into 

Code:

2017-03-11 21:48:26 ProcessBlock: ACCEPTED 1361658
2017-03-11 21:48:26 Requesting 1 blocks from 91.152.122.132:8253
2017-03-11 21:48:26 Cannot fastforward chain because of missing data: 000000001444afbcf537ffcae9801be122ff493a1731c18f289b4efbf3d640e7

Keep getting "Cannot fastforward chain...", disconnected from nodes, connected to another one and loop again.

[pallas]

It seems this is the reason where the sync issue runs into 

Code:

2017-03-11 21:48:26 ProcessBlock: ACCEPTED 1361658
2017-03-11 21:48:26 Requesting 1 blocks from 91.152.122.132:8253
2017-03-11 21:48:26 Cannot fastforward chain because of missing data: 000000001444afbcf537ffcae9801be122ff493a1731c18f289b4efbf3d640e7

Keep getting "Cannot fastforward chain...", disconnected from nodes, connected to another one and loop again.

Is this your first sync? What is your current block height?

[btcma]

http://xcn-explorer.selektion21.de/   This site opens to show  “couldn't connect to host”!

[akidokatsui]

need more exchange for xcn

[George5]

need more exchange for xcn

Don't worry they will be added. For now, being listed on BTC38 with more than 5$ mln. daily volume is pretty good too. And when the devs fix the wallet and more cool features are added, we will see XCN shine again

[hashgoalPool]

after adding nodelist connection are still 2 only

[George5]

after adding nodelist connection are still 2 only

I opened the port on my router and now I have 30+ connections

[pallas]

http://xcn-explorer.selektion21.de/   This site opens to show  “couldn't connect to host”!

I already contacted the guy hosting it to ask for a fix.

[hashgoalPool]

pallas , can i have blockchain snapshot of this moment to quick test my pool. sync take longer though i have last snapshot you uploaded.

[pallas]

pallas , can i have blockchain snapshot of this moment to quick test my pool. sync take longer though i have last snapshot you uploaded.

Here it is, new blockchain snapshot:

https://mega.nz/#!JBpXhZLA!CSAKL2oa-EFoQnaAsxIhVdo-ur9Dby4bb3gmYykJlq0

[btcma]

NEW Explorer http://xcn-explorer.selektion21.de/ Status: offline？

[truckythin]

Here it is, new blockchain snapshot:

https://mega.nz/#!JBpXhZLA!CSAKL2oa-EFoQnaAsxIhVdo-ur9Dby4bb3gmYykJlq0

WARNING: AFTER CLEAN ALL DATA FILES (EXCEPT WALLET.DAT) AND USE BLOCKCHAIN SNAPSHOT ABOVE, MY WALLET HAS BROKEN

Tried to use -salvagewallet or even -upgradewallet not no luck.
I copied old wallet.dat to new data folder, and open the QT again, not loading normally but end up with empty wallet, no transactions, no receiving address. It create wallet.xxxxx.bak in the data folder.

What happenning with my wallet, my coin>?

debug.log

2017-03-13 03:48:02 Cryptonite version v0.1.1.0-g3fb0591-beta (Sun, 26 Oct 2014 23:10:32 +1100)
2017-03-13 03:48:02 Using OpenSSL version OpenSSL 1.0.1l 15 Jan 2015
2017-03-13 03:48:02 Default data directory C:\Users\XXX\AppData\Roaming\Cryptonite
2017-03-13 03:48:02 Using data directory F:\XXX\XCN\data
2017-03-13 03:48:02 Using at most 125 connections (2048 file descriptors available)
2017-03-13 03:48:02 Using 8 threads for script verification
2017-03-13 03:48:02 Using wallet wallet-original.dat
2017-03-13 03:48:02 init message: Verifying wallet...
2017-03-13 03:48:02 CDBEnv::Open : LogDir=F:\XXX\XCN\data\database ErrorFile=F:\PTS-RDP\XCN\data\db.log
2017-03-13 03:48:02 Renamed wallet-original.dat to wallet.1489376882.bak
2017-03-13 03:48:02 CDBEnv::Salvage : Database salvage found errors, all data may not be recoverable.
2017-03-13 03:48:02 Salvage(aggressive) found no records in wallet.1489376882.bak.
2017-03-13 03:48:02 Initialization result: 0
2017-03-13 03:48:02 Requesting shutdown
2017-03-13 03:48:02 Running Shutdown in thread
2017-03-13 03:48:02 Shutdown : In progress...
2017-03-13 03:48:02 StopNode()
2017-03-13 03:48:02 Shutdown : done
2017-03-13 03:48:02 Shutdown finished
2017-03-13 03:48:02 Shutdown result: 1
2017-03-13 03:48:02 Stopping thread
2017-03-13 03:48:02 Stopped thread

db.log

file wallet.dat has LSN 1/2295, past end of log at 1/476
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
file wallet.dat has LSN 1/2295, past end of log at 1/476
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
file wallet.dat has LSN 1/2295, past end of log at 1/476
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
DB_ENV->log_flush: LSN of 1/2295 past current end-of-log of 1/476
Database environment corrupt; the wrong log files may have been removed or incompatible database files imported from another environment
PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
wallet.dat: unable to flush page: 10
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
PANIC: fatal region error detected; run recovery
file unknown has LSN 1/15617, past end of log at 1/28
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
Page 0: metadata page corrupted
Page 0: could not check metadata page
wallet.dat: DB_VERIFY_BAD: Database verification failed
file unknown has LSN 1/15617, past end of log at 1/1073
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
wallet.1489369816.bak: DB_VERIFY_BAD: Database verification failed
file unknown has LSN 1/15617, past end of log at 1/1257
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
__db_meta_setup: F:\PTS-RDP\XCN\data\wallet.dat: unexpected file type or format
file unknown has LSN 1/15617, past end of log at 1/2397
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
wallet.1489370397.bak: DB_VERIFY_BAD: Database verification failed
file unknown has LSN 1/15617, past end of log at 1/1103
Commonly caused by moving a database from one database environment
to another without clearing the database LSNs, or by removing all of
the log files from a database environment
wallet.1489376882.bak: DB_VERIFY_BAD: Database verification failed

[George5]

Here it is, new blockchain snapshot:

https://mega.nz/#!JBpXhZLA!CSAKL2oa-EFoQnaAsxIhVdo-ur9Dby4bb3gmYykJlq0

WARNING: AFTER CLEAN ALL DATA FILES (EXCEPT WALLET.DAT) AND USE BLOCKCHAIN SNAPSHOT ABOVE, MY WALLET HAS BROKEN

Tried to use -salvagewallet or even -upgradewallet not no luck.
I copied old wallet.dat to new data folder, and open the QT again, not loading normally but end up with empty wallet, no transactions, no receiving address. It create wallet.xxxxx.bak in the data folder.

What happenning with my wallet, my coin>?

[/quote]

I just downloaded that blockchain, allowed it to sync and made som test transactions to BTER. Everything worked smooth, so probably something just went wrong on your particular wallet.

[truckythin]

I just downloaded that blockchain, allowed it to sync and made som test transactions to BTER. Everything worked smooth, so probably something just went wrong on your particular wallet.

I just work properly with old wallet QT... dont know what happen... felling worried about my coins in wallet 

[hashgoalPool]

pool require this

"coinbaseaux" : {
"flags" : "062f503253482f"
}

but it doesn't exist in getblocktemplate?

[hashgoalPool]

can anyone provide me link for compiled minerd for windows?

[hashgoalPool]

here my test pool . can anyone test it for me, please...

stratum+tcp://213.125.232.37:3334

-u address  -p x

i am having all 480x AMD gpus, but problem is claymore not support latest gpus.
and i not have any nvidia gpus.

[pallas]

Here it is, new blockchain snapshot:

https://mega.nz/#!JBpXhZLA!CSAKL2oa-EFoQnaAsxIhVdo-ur9Dby4bb3gmYykJlq0

WARNING: AFTER CLEAN ALL DATA FILES (EXCEPT WALLET.DAT) AND USE BLOCKCHAIN SNAPSHOT ABOVE, MY WALLET HAS BROKEN

Tried to use -salvagewallet or even -upgradewallet not no luck.
I copied old wallet.dat to new data folder, and open the QT again, not loading normally but end up with empty wallet, no transactions, no receiving address. It create wallet.xxxxx.bak in the data folder.

Did you use the same wallet binary now and before? Did you try a wallet backup?

[hashgoalPool]

ahh, one more thing need to setup, what can be possible vardiff range for M7?

[pallas]

here my test pool . can anyone test it for me, please...

stratum+tcp://213.125.232.37:3334

-u=address  -p x

i am having all 480x AMD gpus, but problem is claymore not support latest gpus.
and i not have any nvidia gpus.

Stratum authentication failed