SolarisDev (OP)
|
|
October 08, 2017, 07:31:06 PM |
|
so my xlr are on coinexchange, do i still have to do the swap?
We got a message from CoinExchange regarding a swap : I have had very little time lately . We are upgrading the system at the moment. So unfortunately cannot commit to doing the swap at least for the next week. Then we asked him if its ok to contact him after next week and he agreed. In the meantime, I sent a query to Novaexchange with request to add Solaris with Xevan algorithm to their voting list . You have time to swap until 06 December. You can trade for now only old Solaris with Nist5 algorithm. Your choice. Thanks for your support!
|
|
|
|
ironmanTR
Member
Offline
Activity: 95
Merit: 10
|
|
October 08, 2017, 07:49:54 PM |
|
so my xlr are on coinexchange, do i still have to do the swap?
We got a message from CoinExchange regarding a swap : I have had very little time lately . We are upgrading the system at the moment. So unfortunately cannot commit to doing the swap at least for the next week. Then we asked him if its ok to contact him after next week and he agreed. In the meantime, I sent a query to Novaexchange with request to add Solaris with Xevan algorithm to their voting list . You have time to swap until 06 December. You can trade for now only old Solaris with Nist5 algorithm. Your choice. Thanks for your support! How to setup masternode link is deleted. Can you send new one ?
|
|
|
|
The Cryptophilanthropist
|
|
October 08, 2017, 08:11:17 PM |
|
YOU SHOULD BE ABLE TO SUBSTITUTE EVERYTHING HERE FOR MASTERNODES AS WELL AS THE COLD MASTERNODE GUIDE WHICH WILL REQUIRE A VPS TO RUN, HOT-NODING WORKS BUT IS NOT VERY SAFE!!! http://www.explorerz.top/vivo-mn.htmlJUST SUBSTITUTE EVERYTHING VIVO FOR SOLARIS , HOPEFULLY THIS HELPS OTHERS!!
|
GdonateqfnmiJKv7mfnUcyvZHaiqxcTQS1 - XGTC DEV FUND 1G2PTf59cYsWKoZjj3i3Cv1Bb8NuNaeho2 - BTC POOL DEV
|
|
|
SolarisDev (OP)
|
|
October 08, 2017, 08:18:17 PM |
|
I'm pleased to announce that @schyter will be a part of Solaris Team. He will take responsibility for a telegram community. He will receive 1000 XLR now and we going to pay him 150 XLR every week.
Solaris Telegram
Thanks for support Solaris !
|
|
|
|
schyter
|
|
October 08, 2017, 08:23:12 PM Last edit: October 08, 2017, 09:10:25 PM by schyter |
|
|
|
|
|
The Cryptophilanthropist
|
|
October 08, 2017, 08:35:04 PM Last edit: October 08, 2017, 08:52:22 PM by The Cryptophilanthropist |
|
BASICALLY WHAT I POSTED (AND DIDN'T GET PAID FOR CUZ I DIDN'T MAKE IT ) EXCEPT YOURS IS NOT AS GOOD !! lol WEAK! AND....DOES NOT EXPLAIN "COLD" NODE SETUP !! #PEOPLEGETTINGPAIDFORSHITWORK ...AND SOMETHING LOOKS FUNNY IN HIS TUTORIAL...CAN YOU SPOT WALDO?
|
GdonateqfnmiJKv7mfnUcyvZHaiqxcTQS1 - XGTC DEV FUND 1G2PTf59cYsWKoZjj3i3Cv1Bb8NuNaeho2 - BTC POOL DEV
|
|
|
SolarisDev (OP)
|
|
October 08, 2017, 08:48:48 PM Last edit: October 09, 2017, 06:56:39 AM by SolarisDev |
|
Algo: XEVAN Block time: 60 seconds Difficulty adjustment: each block (Dark Gravity Wave v3) PoW: ends on block 259200 / 180 days PoS: starting from block 259201 Masternodes: 1000 XLR collateral Darksend: TX obfuscation InstantX: SwiftTX RPC port: 61020 P2P port: 60020 Solaris signature campaign is closed for a new members !
|
|
|
|
The Cryptophilanthropist
|
|
October 08, 2017, 08:53:24 PM |
|
BASICALLY WHAT I POSTED (AND DIDN'T GET PAID FOR CUZ I DIDN'T MAKE IT ) EXCEPT YOURS IS NOT AS GOOD !! lol WEAK! AND....DOES NOT EXPLAIN "COLD" NODE SETUP !! #PEOPLEGETTINGPAIDFORSHITWORK ...AND SOMETHING LOOKS FUNNY IN HIS TUTORIAL...CAN YOU SPOT WALDO? ....since I got buried by a repeat post
|
GdonateqfnmiJKv7mfnUcyvZHaiqxcTQS1 - XGTC DEV FUND 1G2PTf59cYsWKoZjj3i3Cv1Bb8NuNaeho2 - BTC POOL DEV
|
|
|
ironmanTR
Member
Offline
Activity: 95
Merit: 10
|
|
October 08, 2017, 09:07:16 PM |
|
While trying to setup masternode, I get nothing when I type masternode outputs. Just get " {
} "
|
|
|
|
The Cryptophilanthropist
|
|
October 08, 2017, 09:13:37 PM |
|
While trying to setup masternode, I get nothing when I type masternode outputs. Just get " {
} "
send more than 1000 to another wallet and then exactly 1000 back to the wallet you want to use, and start again with the setup use this , substitute everything Vivo for Solaris: http://www.explorerz.top/vivo-mn.html
|
GdonateqfnmiJKv7mfnUcyvZHaiqxcTQS1 - XGTC DEV FUND 1G2PTf59cYsWKoZjj3i3Cv1Bb8NuNaeho2 - BTC POOL DEV
|
|
|
frostminer
|
|
October 09, 2017, 12:34:14 AM Last edit: October 09, 2017, 03:40:54 PM by frostminer |
|
Question.
Why's seemingly the miners getting 2XLR instead of 1.6?
Is it related to all the entries in the log like this:
2017-10-09 00:29:09 CMasternodePayments::IsTransactionValid - Missing required payment of 0.40 to SXYwUbQi7LiNjDr8xxxxpmqA7WSsAT4aNx 2017-10-09 00:29:09 Invalid mn payment detected CTransaction(hash=9b346xxxb6, ver=1, vin.size=1, vout.size=1, nLockTime=0) CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 42949xx95), coinbase 02340804c5c2da59088100002500000000796gggg000, nSequence=0) CTxOut(nValue=2.00000000, scriptPubKey=OP_DUP OP_HASH160 f6f7dxxxf3f3) 2017-10-09 00:29:09 Masternode payment enforcement is disabled, accepting block
|
|
|
|
enigs
Newbie
Offline
Activity: 62
Merit: 0
|
|
October 09, 2017, 12:47:25 AM |
|
Very exciting project. I'm about to buy enough for a masternode, but I'm uncertain whether it's safe to take it off Coinexchange and place it onto the Raspberry wallet for MN/PoS or wait until the kinks are ironed out.
Any feedback is much appreciated, thanks!
|
|
|
|
schyter
|
|
October 09, 2017, 12:47:54 AM Last edit: October 09, 2017, 01:01:52 AM by schyter |
|
There are detailed instructions for installing masternode?
HOW TO SETUP MASTERNODE GUIDEVery exciting project. I'm about to buy enough for a masternode, but I'm uncertain whether it's safe to take it off Coinexchange and place it onto the Raspberry wallet for MN/PoS or wait until the kinks are ironed out.
Any feedback is much appreciated, thanks!
Which kinks are you referring to? I am personally running a masternode and i have recieved 4 payouts so far. you cannot run masternodes with coins from coinexchange currently. You need the coins of the new XEVAN chain. So you have to buy from coinexchange and swap them for the new coins before you can run a masternode
|
|
|
|
frostminer
|
|
October 09, 2017, 12:49:38 AM |
|
Very exciting project. I'm about to buy enough for a masternode, but I'm uncertain whether it's safe to take it off Coinexchange and place it onto the Raspberry wallet for MN/PoS or wait until the kinks are ironed out.
Any feedback is much appreciated, thanks!
To run masternode you must be on the new xevan chain. Coins from old chain will need swap
|
|
|
|
maxmad_x
Sr. Member
Offline
Activity: 546
Merit: 250
It takes a lot to build but not much to lose
|
|
October 09, 2017, 12:50:55 AM |
|
THis is incomplete The External and internal IPs and external and internal ports on both of the Conf files are not clear!
|
|
|
|
schyter
|
|
October 09, 2017, 01:10:02 AM Last edit: October 09, 2017, 01:28:00 AM by schyter |
|
THis is incomplete
The External and internal IPs and external and internal ports on both of the Conf files are not clear!
Sir, what do you mean by they are not clear? Are they illegible to you? Also, where in the guide did you see internal IP and internal Port? It seems you didn't follow the guide thoroughly because you are mentioning things that are not in it. Please start again and this time, follow the guide more carefully. Even a single "space" at the wrong place can ruin your masternode setup. solaris.conf should look like this rpcallowip=127.0.0.1 rpcuser=ANY_LONG_USERNAME rpcpassword=ANY_LONG_PASSWORD staking=1 server=1 listen=1 port=port masternode=1 masternodeaddr=YOUR_EXT_IP:PORT externalip=YOUR_EXT_IP:PORT masternodeprivkey=MN_PRIVKEY addnode=78.145.45.173 addnode=92.108.70.246 addnode=89.169.62.37 addnode=89.65.73.101
masternodes.conf should look like this MASTERNODE_ALIAS VPS_IP:PORT Private_key TX_ID TX_INDEX You can find this in the guide If its about sight, you can get help from someone who can see clearly if its still not clear use 60020 for your port Join Telegram Group Chat https://t.me/solariscoin
|
|
|
|
Attractor
Member
Offline
Activity: 238
Merit: 10
|
|
October 09, 2017, 01:32:03 AM |
|
What if my own exernal IP is dynamic?
|
|
|
|
rooster2000bka
|
|
October 09, 2017, 01:37:45 AM |
|
Dear Dev! I see in #1: Solaris signature campaign is closed ! So what your mean? I joint your campaign before, now i still in your signature campaign? Thanks
|
|
|
|
Elder III
|
|
October 09, 2017, 02:03:06 AM |
|
What if my own exernal IP is dynamic?
I may be wrong, but I'm pretty sure that it requires a fixed IP address (that would be standard for masternode coins). That's why many people rent a VPS to set it up, or pay for a service that includes VPS and setup done by them etc.... I have contacted NODEShare about Solaris and they have expressed interest in adding it. They pretty much do it all for you and I think would be worth the fee they charge if they do choose to add Solaris. http://nodeshare.in/Also I see that Node-VPS has added Solaris, but I'm not sure if they offer setup services or if they are just providing the VPS with fixed IP etc.... has anyone used them before? https://node-vps.com/web/
|
|
|
|
enigs
Newbie
Offline
Activity: 62
Merit: 0
|
|
October 09, 2017, 02:11:15 AM |
|
you cannot run masternodes with coins from coinexchange currently. You need the coins of the new XEVAN chain. So you have to buy from coinexchange and swap them for the new coins before you can run a masternode Perfect, that's all I needed to know. Hopefully Nova can list it on the new chain but I wanna grab the old one for now before the price gets too high.
|
|
|
|
|