💥SOLARIS PLATFORM [XLR] 💥Swapping to FinaToken

[Adriano2010]

What if my own exernal IP is dynamic?

I may be wrong, but I'm pretty sure that it requires a fixed IP address (that would be standard for masternode coins). That's why many people rent a VPS to set it up, or pay for a service that includes VPS and setup done by them etc.... I have contacted NODEShare about Solaris and they have expressed interest in adding it. They pretty much do it all for you and I think would be worth the fee they charge if they do choose to add Solaris.

http://nodeshare.in/

Also I see that Node-VPS has added Solaris, but I'm not sure if they offer setup services or if they are just providing the VPS with fixed IP etc.... has anyone used them before?

https://node-vps.com/web/

I use now first time node-vps.com and works fine. They run the masternode after you setup your wallet and they not store and not need send coins to. Is easy to setup and you don't need to run or leave your wallet and PC on. I got my first 0.4 XLR mined through masternode.

[1714063080]

1714063080

[1714063080]

1714063080

[1714063080]

1714063080

[9ine]

Are there any future plans to other exchanges ?

[enigs]

I plan on using the Raspberry wallet but in the meantime I tested the Mac wallet and it keeps crashing every time I try to open it.  I don't have an issue with any other Qt wallets.  Sorry if I'm being a pain, just want to help troubleshoot.

---

Time Awake Since Boot: 120000 seconds

System Integrity Protection: disabled

Crashed Thread:        0  Dispatch queue: com.apple.main-thread

Exception Type:        EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes:       0x0000000000000001, 0x0000000000000000
Exception Note:        EXC_CORPSE_NOTIFY

Application Specific Information:
/Users/*/Downloads/solariscoin-Qt.app/Contents/MacOS/solariscoin-Qt

Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libcrypto.1.0.0.dylib            0x0000000106a8f5d2 RAND_add + 11
1   com.yourcompany.solariscoin-Qt   0x000000010625344c CInit::CInit() + 188
2   com.yourcompany.solariscoin-Qt   0x0000000106253926 0x106193000 + 788774
3   dyld                             0x00007fff644dffeb ImageLoaderMachO::doModInitFunctions(ImageLoader::LinkContext const&) + 265
4   dyld                             0x00007fff644e0164 ImageLoaderMachO::doInitialization(ImageLoader::LinkContext const&) + 40
5   dyld                             0x00007fff644dc79d ImageLoader::recursiveInitialization(ImageLoader::LinkContext const&, unsigned int, ImageLoader::InitializerTimingList&, ImageLoader::UninitedUpwards&) + 305
6   dyld                             0x00007fff644dc623 ImageLoader::processInitializers(ImageLoader::LinkContext const&, unsigned int, ImageLoader::InitializerTimingList&, ImageLoader::UninitedUpwards&) + 127
7   dyld                             0x00007fff644dc893 ImageLoader::runInitializers(ImageLoader::LinkContext const&, ImageLoader::InitializerTimingList&) + 75
8   dyld                             0x00007fff644cf0f1 dyld::initializeMainExecutable() + 208
9   dyld                             0x00007fff644d2e5d dyld::_main(macho_header const*, unsigned long, int, char const**, char const**, char const**, unsigned long*) + 3793
10  dyld                             0x00007fff644ce276 dyldbootstrap::start(macho_header const*, int, char const**, long, macho_header const*, unsigned long*) + 512
11  dyld                             0x00007fff644ce036 _dyld_start + 54

Thread 0 crashed with X86 Thread State (64-bit):
  rax: 0x00055b13eb8dd380  rbx: 0x0000000000000029  rcx: 0x00055b13eb963839  rdx: 0x0000000000000004
  rdi: 0x00007fff59a69918  rsi: 0x0000000000000008  rbp: 0x00007fff59a69900  rsp: 0x00007fff59a698e0
   r8: 0x0000000059dade5e   r9: 0x00000000fffffffe  r10: 0x0000000106bb0b01  r11: 0x0000000106a8f5c7
  r12: 0x00007fff7b853070  r13: 0x00007fff64506568  r14: 0x00007fff7b853070  r15: 0x00007ff3d250d3d0
  rip: 0x0000000106a8f5d2  rfl: 0x0000000000010202  cr2: 0x0000000106a8f5c7
  
Logical CPU:     3
Error Code:      0x00000000
Trap Number:     6

[Alpha0One1]

I have downloaded the wallet. Can this be mined using windows wallet?

[LycheeBit]

After several DDOS attacks on the server, mining XLR (with Xevan) is working fine.
316 blocks have been found the last 24h : http://www.lycheebit.com/site/block?id=1917

• Stratum  : lycheebit.com:3739
• User     : YOUR_XLR_ADDRESS
• Password : c=XLR_XEVAN

The peers list :

Code:

addnode=35.197.213.197:60020
addnode=107.191.46.200:60020
addnode=[2001:0:9d38:78cf:3c29:137d:a061:dbbe]:60020
addnode=115.79.5.135:60020
addnode=45.76.166.102:60020
addnode=[2001:0:5ef5:79fb:3430:25b2:7645:6901]:60020
addnode=142.44.194.73:60020
addnode=5.149.209.66:60020
addnode=54.36.224.242:60020
addnode=37.97.175.52:60020
addnode=[2001:0:9d38:78cf:2847:3c48:42fb:5a02]:60020
addnode=5.44.2.12:60020
addnode=108.77.80.39:60020
addnode=85.214.152.3:60020
addnode=86.142.197.19:60020
addnode=[2001:0:9d38:78cf:1859:3b9e:a10b:c54b]:60020

Thanks to the miners using LycheeBit

[greenhope]

I have downloaded the wallet. Can this be mined using windows wallet?

You won't mine any coin in your lifetime.

[maxmad_x]

Why not all blocks include payment for MN??? 
Have blocks with one transaction 1,6XLR for miner and have blocks with 0,4XLR for MN.

There is not enough MNs running to soak up all the block rewards.

This is due to 1 ip restriction.

so is the reward of 0.4 XLR for MN? because my masternode keeps changing status from enabled to missing

[R0mi]

I may be wrong, but I'm pretty sure that it requires a fixed IP address (that would be standard for masternode coins). That's why many people rent a VPS to set it up, or pay for a service that includes VPS and setup done by them etc.... I have contacted NODEShare about Solaris and they have expressed interest in adding it. They pretty much do it all for you and I think would be worth the fee they charge if they do choose to add Solaris.

http://nodeshare.in/

[/quote]

How can others contact nodeshare?  I didn't see any addresses on the website where I could request that they add Solaris.

Thanks.

[maxmad_x]

THis is incomplete

The External and internal IPs and external and internal ports on both of the Conf files are not clear!

Sir, what do you mean by they are not clear?
Are they illegible to you?

Also, where in the guide did you see internal IP and internal Port?
It seems you didn't follow the guide thoroughly because you are mentioning things that are not in it.
Please start again and this time, follow the guide more carefully. Even a single "space" at the wrong place can ruin your masternode setup.

solaris.conf should look like this

Code:

rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
port=port
masternode=1
masternodeaddr=YOUR_EXT_IP:PORT
externalip=YOUR_EXT_IP:PORT
masternodeprivkey=MN_PRIVKEY
addnode=78.145.45.173
addnode=92.108.70.246
addnode=89.169.62.37
addnode=89.65.73.101

masternodes.conf should look like this

Code:

MASTERNODE_ALIAS VPS_IP:PORT Private_key TX_ID TX_INDEX

You can find this in the guide
If its about sight, you can get help from someone who can see clearly if its still not clear

use 60020 for  your port

Join Telegram Group Chat
https://t.me/solariscoin

Hi @schyter! Thank you so much for sharing both conf files.
I used the same configuration. I have received 1 reward by now of 0.4 XLR.
I dont understand why the status of MN keeps going to MISSING

The whole tutorial assumes that I am running the node on the VPS and not on the local machine.
If I am using my home server to run a machine to host the node, my externalIP and my VPSIP in both will be the same. I guess that might cause an issue. right?

My conf files look like this

Solaris.conf

Code:

rpcallowip=192.168.0.1
rpcuser=aksjbdkajndkansdkjnansdasd
rpcpassword=aknsdlk;an;sdn;ansdna;nsdansdnansdjknajsndkasd
staking=1
server=1
listen=1
masternode=1
masternodeaddr=externalIP:60020
externalip=externalIP:60020
masternodeprivkey=87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb
port=60020

masternode.conf

Code:

mn1 externalIP:60020 87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb 734123lj1b23jkb12lk3b1b2l3kbl1k2b3kb12kb3b132jklb13jb2kl3b1bj3lk1b2j39c5 1

# MasternodeAlias externalIP:portn masternode_privatekey Transaction_ID transaction_index
Here my VPS is my server with the same IP

Can you please spot the mistake?
Thank you






# Masternode status

[maxmad_x]

Post removed due to redundant slack channel information

If devs need a channel this post will be reinstated

[emage]

THis is incomplete

The External and internal IPs and external and internal ports on both of the Conf files are not clear!

Sir, what do you mean by they are not clear?
Are they illegible to you?

Also, where in the guide did you see internal IP and internal Port?
It seems you didn't follow the guide thoroughly because you are mentioning things that are not in it.
Please start again and this time, follow the guide more carefully. Even a single "space" at the wrong place can ruin your masternode setup.

solaris.conf should look like this

Code:

rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
port=port
masternode=1
masternodeaddr=YOUR_EXT_IP:PORT
externalip=YOUR_EXT_IP:PORT
masternodeprivkey=MN_PRIVKEY
addnode=78.145.45.173
addnode=92.108.70.246
addnode=89.169.62.37
addnode=89.65.73.101

masternodes.conf should look like this

Code:

MASTERNODE_ALIAS VPS_IP:PORT Private_key TX_ID TX_INDEX

You can find this in the guide
If its about sight, you can get help from someone who can see clearly if its still not clear

use 60020 for  your port

Join Telegram Group Chat
https://t.me/solariscoin

Hi @schyter! Thank you so much for sharing both conf files.
I used the same configuration. I have received 1 reward by now of 0.4 XLR.
I dont understand why the status of MN keeps going to MISSING

The whole tutorial assumes that I am running the node on the VPS and not on the local machine.
If I am using my home server to run a machine to host the node, my externalIP and my VPSIP in both will be the same. I guess that might cause an issue. right?

My conf files look like this

Solaris.conf

Code:

rpcallowip=192.168.0.1
rpcuser=aksjbdkajndkansdkjnansdasd
rpcpassword=aknsdlk;an;sdn;ansdna;nsdansdnansdjknajsndkasd
staking=1
server=1
listen=1
masternode=1
masternodeaddr=externalIP:60020
externalip=externalIP:60020
masternodeprivkey=87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb
port=60020

masternode.conf

Code:

mn1 externalIP:60020 87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb 734123lj1b23jkb12lk3b1b2l3kbl1k2b3kb12kb3b132jklb13jb2kl3b1bj3lk1b2j39c5 1

# MasternodeAlias externalIP:portn masternode_privatekey Transaction_ID transaction_index
Here my VPS is my server with the same IP

Can you please spot the mistake?
Thank you






# Masternode status

1. You should hide your private key!
2. 60020 is not an IP address

[netil]

I am sorry for noob question, but how many XLR i'll receive from 1 masternode?

[SolarisDev]

Dear Dev!
I see in #1: Solaris signature campaign is closed !
So what your mean? I joint your campaign before, now i still in your signature campaign?
Thanks

I mean signature campaign  is closed for new members .


Thanks for your support!

[Mr.Cat]

Whose address is this?
SjorAdKA7Y6yGCHS2bd8a9xqr98VSvFJco
There are 2 xlr already more than one day

[percy_tc]

What is obfuscation?

[azkashtan]

My mn seems ENABLED (not on my wallet only, on other one also), but I didn't have any rewards for 14 hours. How it can be? Is anyone faced with such behaviour?

[maxmad_x]

THis is incomplete

The External and internal IPs and external and internal ports on both of the Conf files are not clear!

Sir, what do you mean by they are not clear?
Are they illegible to you?

Also, where in the guide did you see internal IP and internal Port?
It seems you didn't follow the guide thoroughly because you are mentioning things that are not in it.
Please start again and this time, follow the guide more carefully. Even a single "space" at the wrong place can ruin your masternode setup.

solaris.conf should look like this

Code:

rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
port=port
masternode=1
masternodeaddr=YOUR_EXT_IP:PORT
externalip=YOUR_EXT_IP:PORT
masternodeprivkey=MN_PRIVKEY
addnode=78.145.45.173
addnode=92.108.70.246
addnode=89.169.62.37
addnode=89.65.73.101

masternodes.conf should look like this

Code:

MASTERNODE_ALIAS VPS_IP:PORT Private_key TX_ID TX_INDEX

You can find this in the guide
If its about sight, you can get help from someone who can see clearly if its still not clear

use 60020 for  your port

Join Telegram Group Chat
https://t.me/solariscoin

Hi @schyter! Thank you so much for sharing both conf files.
I used the same configuration. I have received 1 reward by now of 0.4 XLR.
I dont understand why the status of MN keeps going to MISSING

The whole tutorial assumes that I am running the node on the VPS and not on the local machine.
If I am using my home server to run a machine to host the node, my externalIP and my VPSIP in both will be the same. I guess that might cause an issue. right?

My conf files look like this

Solaris.conf

Code:

rpcallowip=192.168.0.1
rpcuser=aksjbdkajndkansdkjnansdasd
rpcpassword=aknsdlk;an;sdn;ansdna;nsdansdnansdjknajsndkasd
staking=1
server=1
listen=1
masternode=1
masternodeaddr=externalIP:60020
externalip=externalIP:60020
masternodeprivkey=87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb
port=60020

masternode.conf

Code:

mn1 externalIP:60020 87ajnsdnasldknalksndlkansdklnaklsndlkasndlknaskldnklasndvb 734123lj1b23jkb12lk3b1b2l3kbl1k2b3kb12kb3b132jklb13jb2kl3b1bj3lk1b2j39c5 1

# MasternodeAlias externalIP:portn masternode_privatekey Transaction_ID transaction_index
Here my VPS is my server with the same IP

Can you please spot the mistake?
Thank you






# Masternode status

1. You should hide your private key!
2. 60020 is not an IP address

All keys are fake in the example
And the 60020 number is indeed a port. Please read the example well

[Cobra9100]

Judging from the blockexplorer, payment Masternode practically do not receive

[CHAOSiTEC]

What if my own exernal IP is dynamic?

I may be wrong, but I'm pretty sure that it requires a fixed IP address (that would be standard for masternode coins). That's why many people rent a VPS to set it up, or pay for a service that includes VPS and setup done by them etc.... I have contacted NODEShare about Solaris and they have expressed interest in adding it. They pretty much do it all for you and I think would be worth the fee they charge if they do choose to add Solaris.

http://nodeshare.in/

Also I see that Node-VPS has added Solaris, but I'm not sure if they offer setup services or if they are just providing the VPS with fixed IP etc.... has anyone used them before?

https://node-vps.com/web/

Node-vps.com sets up the vps for you on one of our servers, there is no need for configuring a vps, and it will create the masternode.conf file for you as well. ill write a guide for the site in the next few days.
(We have been running for over a year now)

[xs.over]

Large botnet came to nist5 chain, hashrate has increased to ~21Gh. Difficulty has tripled today.
WTF?