[OS] nvOC easy-to-use Linux Nvidia Mining

[papampi]

Hey :-)
What do you think is the ideal RAM size for a motherboard running nvOC?

Here is a look at how much it uses one one of my rigs with 7 1070's:

Code:

m1@Miner1:~$ free
              total        used        free      shared  buff/cache   available
Mem:        8107204     1632364     5565128       42012      909712     6055112

As you can see, I have 8 Gb but it uses less than 2 in REMOTE (no local display). I tend to buy HW that I can re-purpose in the event that mining goes south, so I recommend running a single 8 Gb stick per mining host. I typically purchase them as a 16 Gb "kit" with 2 8 GB DIMMs. Clearly, you could go as low as 4 with no issues but I have no use for DIMMs that small outside of mining.

I think it depends on card counts and types.
As stubo said, I think 4Gb is enough too.

1x 1070 + 2x 1060 test rig:

Code:

              total        used        free      shared  buff/cache   available
Mem:        8135504     1061156     5751296       31272     1323052     6703400
Swap:       8388604           0     8388604

8 x 1070  :

Code:

              total        used        free      shared  buff/cache   available
Mem:        8130664     2414736     4060072       62760     1655856     5228228
Swap:       8388604           0     8388604

12 x 1060 :

Code:

              total        used        free      shared  buff/cache   available
Mem:        8130656     2281908     4463608       86440     1385140     5317732
Swap:       8388604           0     8388604

6 X 1060 :

Code:

              total        used        free      shared  buff/cache   available
Mem:        8135612     1571280     5353460       56224     1210872     6125424
Swap:       8388604           0     8388604

[mtx_demon]

So it's been couple months now that I have this issue

I tried HIVEOS and ETHOS bought does not take the time to load as NVOC

something should be wrong the load GOES TOO HIGH than takes around 10 minutes to the rig start mining
after that everything works good just the load is around 10
using ccminer

I tried using z-enemy to mine x16r no problems load was low pretty good

On hiveos using klaust load was around 8 but system worked fine and reboot would take less than 1 minute

Also another trouble that I have here is when the ccminer reboots the temp takes too long to start the 12 GPUS and the watchdog kill before finishes how can I make this longer??
because watchdog is killing almost on GPU9 so I would need more 30 seconds to be safe

Anybody having issues running 12 GPUS??

[papampi]

So it's been couple months now that I have this issue

I tried HIVEOS and ETHOS bought does not take the time to load as NVOC

something should be wrong the load GOES TOO HIGH than takes around 10 minutes to the rig start mining
after that everything works good just the load is around 10
using ccminer

I tried using z-enemy to mine x16r no problems load was low pretty good

On hiveos using klaust load was around 8 but system worked fine and reboot would take less than 1 minute

Also another trouble that I have here is when the ccminer reboots the temp takes too long to start the 12 GPUS and the watchdog kill before finishes how can I make this longer??
because watchdog is killing almost on GPU9 so I would need more 30 seconds to be safe

Anybody having issues running 12 GPUS??

Did you updated the rig recently?
I started updating rigs and it updated nvidia to latest 390 no problem on my 1070 rigs, but my 1060 rigs showed same sympthom
If you check with "top" you will see nvidia-settings at full 100% cpu usage
The only way I found to solve it was to remove nvidia completely, then download and install nvidia-387 manually

These are the steps I took to solve my issue:

Code:

cd Downloads/
wget -c http://us.download.nvidia.com/XFree86/Linux-x86_64/387.34/NVIDIA-Linux-x86_64-387.34.run
sudo service lightdm stop
sudo apt purge nvidia*
chmod +x NVIDIA-Linux-x86_64-387.34.run
sudo ./NVIDIA-Linux-x86_64-387.34.run
sudo apt-mark hold nvidia-387
sudo apt-mark hold nvidia-390
sudo apt install nvidia-settings
sudo wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/xorg.conf -O /etc/X11/xorg.conf.default
sudo cp /etc/X11/xorg.conf.default /etc/X11/xorg.conf
sudo reboot

Or if you want NVIDIA-384 use this link

Code:

http://us.download.nvidia.com/XFree86/Linux-x86_64/384.111/NVIDIA-Linux-x86_64-384.111.run

[mtx_demon]

I love you man!! hahahah just kidding!!

2 minutes to reboot and miner to start


Now I wanna see when ccminer stop if can restart without having issues

[mtx_demon]

I love you man!! hahahah just kidding!!

2 minutes to reboot and miner to start


Now I wanna see when ccminer stop if can restart without having issues

Even HIVEOS it's really easy to use it's not what I am looking here

the NVOC for me is the best. was kinda hard 6 months ago to setup the way that I wanted, but
now I can run the new miners this is the best all control is in your hand

Thanks again!!

[CryptAtomeTrader44]

Miner update for xmr-stack :
https://github.com/fireice-uk/xmr-stak/releases

Changelog:

    fix job update race conditions #1537 #1553 #1554 #1568 #1592
    fix OpenBSD compile #1468
    add currency
        turtlecoin #1469
        IPBC coin #1486
        masari coin #1515
    support for stellite v4 fork #1512 #1555
    extent benchmark option #1473
    fix that cli option --noAMDCache #1486
    fix possible NVIDIA Volat bug #1569
    add support for CUDA 9.2 #1580
    fix broken AMD APP SDK download #1609

[fk1]

After months of mining without problems I messed it up again somehow
I wanted to update to claymore 11.8 so I did the papmpi update script which was posted here around feb. When I recompiled miners somehow this took forever (>30mins) and seemed to loop so I decided to ctrl+c. Now somehow when reboot the mining process doesn't start anymore.

Code:

m1@m1-desktop:~$ screen -r miner
There is no screen to be resumed matching miner.

I tried ./nvOC patch but problem remains. Here is ./nvOC  report

Code:

Software info:
Report ver    :  v0019-2.0.002
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release
nvOC (3main)  :  nvOC v0019-2.0 - Community Release
1bash ver     :  v0019-2.0.003
3main ver     :  v0019-2.0.006
5watchdog ver :  v0019-2.0.011
6tempcontrol v:  v0019-2.0.003
wtm switch ver:  v0019-2.0.0011
Kernel        :  4.4.0-97-generic
OS            :  Ubuntu 16.04.3 LTS
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver :  390.59

Hardware info:
Motherboard   :  ASUS PRIME Z270-A  Rev 1.xx
BIOS ver.     :  1009 07/23/2017
CPU Model     :  Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores     :  2 (Cores + Threads)
Mem Total     :         3984604 kB
Mem Free      :         2848876 kB
Swap Total    :               0 kB
Swap Free     :               0 kB
Ethernet      :  Intel I219-V

HDD and Partion info:
NAME    SIZE FSTYPE TYPE ROTA HOTPLUG TRAN   VENDOR   MODEL             REV MOUNTPOINT
sda    74.5G        disk    1       0 sata   ATA      TOSHIBA MK8052GS 0A
├─sda1    9M vfat   part    1       0
└─sda2 74.5G ext4   part    1       0                                       /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: REMOTE
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 82
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 95

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 480
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 80
CORE_OVERCLOCK (global)....: 150
MEMORY_OVERCLOCK (global) .: 800
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: YES

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: CUSTOM
CUSTOM_WORKERNAME .........: Luise01
plusCPU ...................: NO

ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0

COIN ......................: FTC
FTC_WORKER ................: Luise01
FTC_ADDRESS ...............: LuisenMi...
FTC_POOL ..................: hub.miningpoolhub.com
FTC_PORT ..................: 20510
FTC_INTENSITY .............: 23

PS: When I hit 'bash 3main' it seems like its working but this is only for ETH. iE FTC ccminer starts but doesn't mine. When I do 'bash 3main' I also have to ctrl+C the following error twice in order to continue:

Code:

INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
  self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)

** (guake:3394): WARNING **: Binding 'F12' failed!

[papampi]

After months of mining without problems I messed it up again somehow
I wanted to update to claymore 11.8 so I did the papmpi update script which was posted here around feb. When I recompiled miners somehow this took forever (>30mins) and seemed to loop so I decided to ctrl+c. Now somehow when reboot the mining process doesn't start anymore.

Code:

m1@m1-desktop:~$ screen -r miner
There is no screen to be resumed matching miner.

I tried ./nvOC patch but problem remains. Here is ./nvOC  report

Code:

Software info:
Report ver    :  v0019-2.0.002
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release
nvOC (3main)  :  nvOC v0019-2.0 - Community Release
1bash ver     :  v0019-2.0.003
3main ver     :  v0019-2.0.006
5watchdog ver :  v0019-2.0.011
6tempcontrol v:  v0019-2.0.003
wtm switch ver:  v0019-2.0.0011
Kernel        :  4.4.0-97-generic
OS            :  Ubuntu 16.04.3 LTS
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver :  390.59

Hardware info:
Motherboard   :  ASUS PRIME Z270-A  Rev 1.xx
BIOS ver.     :  1009 07/23/2017
CPU Model     :  Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores     :  2 (Cores + Threads)
Mem Total     :         3984604 kB
Mem Free      :         2848876 kB
Swap Total    :               0 kB
Swap Free     :               0 kB
Ethernet      :  Intel I219-V

HDD and Partion info:
NAME    SIZE FSTYPE TYPE ROTA HOTPLUG TRAN   VENDOR   MODEL             REV MOUNTPOINT
sda    74.5G        disk    1       0 sata   ATA      TOSHIBA MK8052GS 0A
├─sda1    9M vfat   part    1       0
└─sda2 74.5G ext4   part    1       0                                       /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: REMOTE
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 82
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 95

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 480
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 80
CORE_OVERCLOCK (global)....: 150
MEMORY_OVERCLOCK (global) .: 800
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: YES

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: CUSTOM
CUSTOM_WORKERNAME .........: Luise01
plusCPU ...................: NO

ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0

COIN ......................: FTC
FTC_WORKER ................: Luise01
FTC_ADDRESS ...............: LuisenMi...
FTC_POOL ..................: hub.miningpoolhub.com
FTC_PORT ..................: 20510
FTC_INTENSITY .............: 23

PS: When I hit 'bash 3main' it seems like its working but this is only for ETH. iE FTC ccminer starts but doesn't mine. When I do 'bash 3main' I also have to ctrl+C the following error twice in order to continue:

Code:

INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
  self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)

** (guake:3394): WARNING **: Binding 'F12' failed!

Remove the version file from miners folder thats not working and run the miner update script again.
Test again and see how it goes.

Code:

cd /home/m1/Downloads/
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh
bash /home/m1/Downloads/nvOC_miner_update.sh

[fk1]

1. mining FTC with SPccminer, I can't find a "version" file in the folder.
2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?

[papampi]

1. mining FTC with SPccminer, I can't find a "version" file in the folder.
2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?

Does mining starts at boot with other coins?
Does gnome-terminal opens and 3main runs when rig starts?

[sergey1301]

You will need to enter - edid.bin before nvidia --allow-empty-initial-configuration?? Will you use - Xubuntu, in the updated version?

[nongkrong]

Seem as nice OS for mining rig system. I hope can try it as soon as possible. And i need to learn as fast i can about linux because this basic from linux platform, but I'm sure if i always read from this forum, i'll can learn it.
Thank all masters.

[gs777]

Will there be another ISO version after 2.0? I'm not confident in the process to convert to beta 2.1

Sure when beta testing is done and after stable release

Sounds good!
My rigs really waiting for it
 

[fk1]

1. mining FTC with SPccminer, I can't find a "version" file in the folder.
2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?

Does mining starts at boot with other coins?
Does gnome-terminal opens and 3main runs when rig starts?

Code:

m1@m1-desktop:~$ ps -ef | grep gnome-terminal                                   
m1        2246  1641  0 23:22 ?        00:00:00 /usr/lib/gnome-terminal/gnome-te
rminal-server                                                                   
m1        2416  2153  0 23:22 pts/16   00:00:00 grep --color=auto gnome-terminal
m1@m1-desktop:~$ ps -ef | grep 3main                                            
m1        2273  2252  0 23:22 pts/17   00:00:00 bash /home/m1/3main             
m1        2418  2153  0 23:23 pts/16   00:00:00 grep --color=auto 3main        

With ethminer after reboot.

Code:

 1@m1-desktop:~$ screen -r miner                                 
There is no screen to be resumed matching miner.

[papampi]

1. mining FTC with SPccminer, I can't find a "version" file in the folder.
2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?

Does mining starts at boot with other coins?
Does gnome-terminal opens and 3main runs when rig starts?

Code:

m1@m1-desktop:~$ ps -ef | grep gnome-terminal                                   
m1        2246  1641  0 23:22 ?        00:00:00 /usr/lib/gnome-terminal/gnome-te
rminal-server                                                                   
m1        2416  2153  0 23:22 pts/16   00:00:00 grep --color=auto gnome-terminal
m1@m1-desktop:~$ ps -ef | grep 3main                                            
m1        2273  2252  0 23:22 pts/17   00:00:00 bash /home/m1/3main             
m1        2418  2153  0 23:23 pts/16   00:00:00 grep --color=auto 3main        

With ethminer after reboot.

Code:

 1@m1-desktop:~$ screen -r miner                                 
There is no screen to be resumed matching miner.

Whats the content of ethminer folder?

Code:

ll /home/m1/eth/ethminer/latest

Run the miner update again without re-compile

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh
bash /home/m1/Downloads/nvOC_miner_update.sh

[fk1]

1. mining FTC with SPccminer, I can't find a "version" file in the folder.
2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?

Does mining starts at boot with other coins?
Does gnome-terminal opens and 3main runs when rig starts?

Code:

m1@m1-desktop:~$ ps -ef | grep gnome-terminal                                   
m1        2246  1641  0 23:22 ?        00:00:00 /usr/lib/gnome-terminal/gnome-te
rminal-server                                                                   
m1        2416  2153  0 23:22 pts/16   00:00:00 grep --color=auto gnome-terminal
m1@m1-desktop:~$ ps -ef | grep 3main                                            
m1        2273  2252  0 23:22 pts/17   00:00:00 bash /home/m1/3main             
m1        2418  2153  0 23:23 pts/16   00:00:00 grep --color=auto 3main        

With ethminer after reboot.

Code:

 1@m1-desktop:~$ screen -r miner                                 
There is no screen to be resumed matching miner.

Whats the content of ethminer folder?

Code:

ll /home/m1/eth/ethminer/latest

Run the miner update again without re-compile

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh
bash /home/m1/Downloads/nvOC_miner_update.sh

ehtminer folder:

Code:

m1@m1-desktop:~$ ll /home/m1/eth/ethminer/latest
total 10664
drwxrwxr-x 2 m1 m1     4096 Jun  5 12:59 ./
drwxrwxr-x 6 m1 m1     4096 Jan  6 12:36 ../
-rwxr-xr-x 1 m1 m1 10904267 May 15 04:35 ethminer*
-rwxrwxr-x 1 m1 m1        6 May 15 10:43 version*

Re-Update:

Code:

m1@m1-desktop:~$ cd /home/m1/Downloads
m1@m1-desktop:~/Downloads$ wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh
--2018-06-10 04:01:09--  https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 15361 (15K) [text/plain]
Saving to: ‘nvOC_miner_update.sh’

nvOC_miner_update.sh                                100%[==================================================================================================================>]  15.00K  --.-KB/s    in 0.009s

Last-modified header missing -- time-stamps turned off.
2018-06-10 04:01:10 (1.66 MB/s) - ‘nvOC_miner_update.sh’ saved [15361/15361]

m1@m1-desktop:~/Downloads$ bash /home/m1/Downloads/nvOC_miner_update.sh
Updating miners for nvOC V0019-2.x
Stopping miner and watchdog to reduce errors
screen killed (pid 2507)
screen killed (pid 2792)
screen killed (pid 2846)

Reading package lists... Done
Building dependency tree
Reading state information... Done
rar is already the newest version (2:5.3.b2-1).
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
Checking Equihash DSTM zm_miner 0.6.1
DSTM zm miner is up-to-date

Checking Claymore v11.8
Claymore is up-to-date

Checking z-enemy 1.10
z-enemy is up-to-date

Checking Tpruvot ccminer-2.2.5
Tpccminer-2.2.5 is up-to-date

Checking MSFT Tpruvot ccminer-2.2.5 (RVN)
MSFTccminer-2.2.5 is up-to-date

Checking KlausT ccminer 8.20
KlausT ccminer is up-to-date

Checking Vertminer v1.0-stable.2 Release
Vertminer is is up-to-date

Checking nanashi-ccminer-2.2-mod-r2
nanashi-ccminer is up-to-date

Checking Ethminer 0.14.0
ethminer is up-to-date

Checking KTccminer-cryptonight
KTccminer-cryptonight is up-to-date

Checking Equihash Bminer
cat: /home/m1/zec/bminer/latest/version: No such file or directory
Downloading and making changes for Bminer 8.0.0
--2018-06-10 04:01:26--  https://raw.githubusercontent.com/papampi/nvOC_miners/master/Bminer/bminer-v8.0.0.tar.gz
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2018-06-10 04:01:27 ERROR 404: Not Found.


gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error is not recoverable: exiting now
chmod: cannot access '/home/m1/zec/bminer/latest/bminer': No such file or directory
Checking ANXccminer
ANXccminer is up-to-date


Downloading and checking new miners for nvOC-v0019-2.x finished


Do you want to re-compile your miners (y/N)?  N
Canceled..
Re starting miner...

after reboot, ethminer started automatically. I will test some other miner today, tyvm so far papampi!

[fk1]

Side question: how do you kill mining process in your update script papampi?
I ask for rxOC phenomenom: Sometimes claymore crashes here and I am not able to kill process ethdcrminer64 with kill -9 or other commands. Usually I am not able to rebott the machine with 'reboot -f now'. But your update script worked well in killing the process once.

edit: just had more trys with FTC,BTG,ETH and after a couple of reboots no miner starts automatically again gnome-terminal-server and 3main running.

e: to make sure I retried update script with recompile. took like an hour for all and this time succeeded. then I redid nvOC patch and after nvOC reboot. Still no autostart miner

[papampi]

Side question: how do you kill mining process in your update script papampi?
I ask for rxOC phenomenom: Sometimes claymore crashes here and I am not able to kill process ethdcrminer64 with kill -9 or other commands. Usually I am not able to rebott the machine with 'reboot -f now'. But your update script worked well in killing the process once.

edit: just had more trys with FTC,BTG,ETH and after a couple of reboots no miner starts automatically again gnome-terminal-server and 3main running.

e: to make sure I retried update script with recompile. took like an hour for all and this time succeeded. then I redid nvOC patch and after nvOC reboot. Still no autostart miner

No idea how rxOC works, but in nvOC you can stop miner, tempcontrol and watchdog by:

Code:

pkill -e screen

Then restart them by:

Code:

pkill -f 3main

When miner starts it shows the command it used to start it in gnome-terminal, copy the command it shows without screen part (Screen -dmSL miner) and run it manually in a guake tab, see what are the errors.

[NikoDE]

Heyhey!
For a few weeks I'm mining zcash on nvoc- NICE OS! Yesterday I started testing the 19.2.1 beta and since updating it today it works fine- for zcash!
But know I try mining ETN and this doesn't work. It opens ktccminer cryptonight shouldn't it open xmr- stak I was sure etn also has cryptonightv7.
Anyway there are only rejected shares on ktccminer.
Perhaps somebody who's not a few weeks of linux new be like me, wants to watch for this point and respond.
Thx

[papampi]

Heyhey!
For a few weeks I'm mining zcash on nvoc- NICE OS! Yesterday I started testing the 19.2.1 beta and since updating it today it works fine- for zcash!
But know I try mining ETN and this doesn't work. It opens ktccminer cryptonight shouldn't it open xmr- stak I was sure etn also has cryptonightv7.
Anyway there are only rejected shares on ktccminer.
Perhaps somebody who's not a few weeks of linux new be like me, wants to watch for this point and respond.
Thx

There was a problem in last commit with algo identification in 0miner, update to latest and it should be solved.