papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
June 03, 2018, 07:01:49 AM Last edit: June 03, 2018, 07:36:41 AM by papampi |
|
Hey :-) What do you think is the ideal RAM size for a motherboard running nvOC?
Here is a look at how much it uses one one of my rigs with 7 1070's: m1@Miner1:~$ free total used free shared buff/cache available Mem: 8107204 1632364 5565128 42012 909712 6055112
As you can see, I have 8 Gb but it uses less than 2 in REMOTE (no local display). I tend to buy HW that I can re-purpose in the event that mining goes south, so I recommend running a single 8 Gb stick per mining host. I typically purchase them as a 16 Gb "kit" with 2 8 GB DIMMs. Clearly, you could go as low as 4 with no issues but I have no use for DIMMs that small outside of mining. I think it depends on card counts and types. As stubo said, I think 4Gb is enough too. 1x 1070 + 2x 1060 test rig: total used free shared buff/cache available Mem: 8135504 1061156 5751296 31272 1323052 6703400 Swap: 8388604 0 8388604
8 x 1070 : total used free shared buff/cache available Mem: 8130664 2414736 4060072 62760 1655856 5228228 Swap: 8388604 0 8388604
12 x 1060 : total used free shared buff/cache available Mem: 8130656 2281908 4463608 86440 1385140 5317732 Swap: 8388604 0 8388604
6 X 1060 : total used free shared buff/cache available Mem: 8135612 1571280 5353460 56224 1210872 6125424 Swap: 8388604 0 8388604
|
|
|
|
mtx_demon
|
|
June 03, 2018, 05:35:33 PM |
|
So it's been couple months now that I have this issue
I tried HIVEOS and ETHOS bought does not take the time to load as NVOC
something should be wrong the load GOES TOO HIGH than takes around 10 minutes to the rig start mining after that everything works good just the load is around 10 using ccminer
I tried using z-enemy to mine x16r no problems load was low pretty good
On hiveos using klaust load was around 8 but system worked fine and reboot would take less than 1 minute
Also another trouble that I have here is when the ccminer reboots the temp takes too long to start the 12 GPUS and the watchdog kill before finishes how can I make this longer?? because watchdog is killing almost on GPU9 so I would need more 30 seconds to be safe
Anybody having issues running 12 GPUS??
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
June 03, 2018, 06:43:48 PM Last edit: June 03, 2018, 08:32:44 PM by papampi |
|
So it's been couple months now that I have this issue
I tried HIVEOS and ETHOS bought does not take the time to load as NVOC
something should be wrong the load GOES TOO HIGH than takes around 10 minutes to the rig start mining after that everything works good just the load is around 10 using ccminer
I tried using z-enemy to mine x16r no problems load was low pretty good
On hiveos using klaust load was around 8 but system worked fine and reboot would take less than 1 minute
Also another trouble that I have here is when the ccminer reboots the temp takes too long to start the 12 GPUS and the watchdog kill before finishes how can I make this longer?? because watchdog is killing almost on GPU9 so I would need more 30 seconds to be safe
Anybody having issues running 12 GPUS??
Did you updated the rig recently? I started updating rigs and it updated nvidia to latest 390 no problem on my 1070 rigs, but my 1060 rigs showed same sympthom If you check with "top" you will see nvidia-settings at full 100% cpu usage The only way I found to solve it was to remove nvidia completely, then download and install nvidia-387 manually These are the steps I took to solve my issue: cd Downloads/ wget -c http://us.download.nvidia.com/XFree86/Linux-x86_64/387.34/NVIDIA-Linux-x86_64-387.34.run sudo service lightdm stop sudo apt purge nvidia* chmod +x NVIDIA-Linux-x86_64-387.34.run sudo ./NVIDIA-Linux-x86_64-387.34.run sudo apt-mark hold nvidia-387 sudo apt-mark hold nvidia-390 sudo apt install nvidia-settings sudo wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/xorg.conf -O /etc/X11/xorg.conf.default sudo cp /etc/X11/xorg.conf.default /etc/X11/xorg.conf sudo reboot
Or if you want NVIDIA-384 use this link http://us.download.nvidia.com/XFree86/Linux-x86_64/384.111/NVIDIA-Linux-x86_64-384.111.run
|
|
|
|
mtx_demon
|
|
June 03, 2018, 11:59:07 PM |
|
I love you man!! hahahah just kidding!!
2 minutes to reboot and miner to start
Now I wanna see when ccminer stop if can restart without having issues
|
|
|
|
mtx_demon
|
|
June 04, 2018, 12:30:34 AM |
|
I love you man!! hahahah just kidding!!
2 minutes to reboot and miner to start
Now I wanna see when ccminer stop if can restart without having issues
Even HIVEOS it's really easy to use it's not what I am looking here the NVOC for me is the best. was kinda hard 6 months ago to setup the way that I wanted, but now I can run the new miners this is the best all control is in your hand Thanks again!!
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
June 04, 2018, 11:55:09 PM |
|
Miner update for xmr-stack : https://github.com/fireice-uk/xmr-stak/releasesChangelog: fix job update race conditions #1537 #1553 #1554 #1568 #1592 fix OpenBSD compile #1468 add currency turtlecoin #1469 IPBC coin #1486 masari coin #1515 support for stellite v4 fork #1512 #1555 extent benchmark option #1473 fix that cli option --noAMDCache #1486 fix possible NVIDIA Volat bug #1569 add support for CUDA 9.2 #1580 fix broken AMD APP SDK download #1609
|
|
|
|
fk1
|
|
June 06, 2018, 06:42:28 AM |
|
After months of mining without problems I messed it up again somehow I wanted to update to claymore 11.8 so I did the papmpi update script which was posted here around feb. When I recompiled miners somehow this took forever (>30mins) and seemed to loop so I decided to ctrl+c. Now somehow when reboot the mining process doesn't start anymore. m1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner.
I tried ./nvOC patch but problem remains. Here is ./nvOC report Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 390.59
Hardware info: Motherboard : ASUS PRIME Z270-A Rev 1.xx BIOS ver. : 1009 07/23/2017 CPU Model : Celeron(R) CPU G3900 @ 2.80GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3984604 kB Mem Free : 2848876 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 74.5G disk 1 0 sata ATA TOSHIBA MK8052GS 0A ├─sda1 9M vfat part 1 0 └─sda2 74.5G ext4 part 1 0 /
VGA info: 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 05:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: REMOTE TEAMVIEWER started ........: NO SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 82 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 95
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 480 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 80 CORE_OVERCLOCK (global)....: 150 MEMORY_OVERCLOCK (global) .: 800 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: CUSTOM CUSTOM_WORKERNAME .........: Luise01 plusCPU ...................: NO
ZM_or_EWBF ................: EWBF EWBF_VERSION ..............: 3_4 EWBF_PERCENT ..............: 0
COIN ......................: FTC FTC_WORKER ................: Luise01 FTC_ADDRESS ...............: LuisenMi... FTC_POOL ..................: hub.miningpoolhub.com FTC_PORT ..................: 20510 FTC_INTENSITY .............: 23
PS: When I hit 'bash 3main' it seems like its working but this is only for ETH. iE FTC ccminer starts but doesn't mine. When I do 'bash 3main' I also have to ctrl+C the following error twice in order to continue: INFO:guake.guake_app:Logging configuration complete /usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:3394): WARNING **: Binding 'F12' failed!
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
June 06, 2018, 07:38:01 AM |
|
After months of mining without problems I messed it up again somehow I wanted to update to claymore 11.8 so I did the papmpi update script which was posted here around feb. When I recompiled miners somehow this took forever (>30mins) and seemed to loop so I decided to ctrl+c. Now somehow when reboot the mining process doesn't start anymore. m1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner.
I tried ./nvOC patch but problem remains. Here is ./nvOC report Software info: Report ver : v0019-2.0.002 nvOC (1bash) : nvOC v0019-2.0 - Community Release nvOC (3main) : nvOC v0019-2.0 - Community Release 1bash ver : v0019-2.0.003 3main ver : v0019-2.0.006 5watchdog ver : v0019-2.0.011 6tempcontrol v: v0019-2.0.003 wtm switch ver: v0019-2.0.0011 Kernel : 4.4.0-97-generic OS : Ubuntu 16.04.3 LTS System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) nvidia driver : 390.59
Hardware info: Motherboard : ASUS PRIME Z270-A Rev 1.xx BIOS ver. : 1009 07/23/2017 CPU Model : Celeron(R) CPU G3900 @ 2.80GHz CPU Cores : 2 (Cores + Threads) Mem Total : 3984604 kB Mem Free : 2848876 kB Swap Total : 0 kB Swap Free : 0 kB Ethernet : Intel I219-V
HDD and Partion info: NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT sda 74.5G disk 1 0 sata ATA TOSHIBA MK8052GS 0A ├─sda1 9M vfat part 1 0 └─sda2 74.5G ext4 part 1 0 /
VGA info: 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 04:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 05:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 08:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1) 09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
1bash settings: 1bash version .............: v0019-2.0.003 LOCAL or REMOTE ...........: REMOTE TEAMVIEWER started ........: NO SSH daemon started ........: YES SLOW_USB_KEY_MODE .........: NO SRR .......................: NO Watchdog ..................: YES
Temp Control ..............: YES TARGET_TEMP ...............: 82 __FAN_ADJUST ..............: 5 POWER_ADJUST ..............: 5 ALLOWED_TEMP_DIFF .........: 2 RESTORE_POWER_LIMIT .......: 90 MINIMAL_FAN_SPEED .........: 95
CLEAR_LOGS_ON_BOOT ........: NO AUTO_UPDATE ...............: STABLE AUTO_REBOOT ...............: NO _Parallax_MODE (upPaste)...: NO
TELEGRAM_MESSAGES .: YES TELEGRAM_ALERTS .: YES TELEGRAM_TYPE .............: papampi TELEGRAM_TIMEOUT_IN_MINUTES: 480 TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN
P106_100_FULL_HEADLESS_MODE: NO GPUPowerMizerMode_Adjust...: NO POWERLIMIT (global) .......: YES POWERLIMIT_WATTS ..........: 80 CORE_OVERCLOCK (global)....: 150 MEMORY_OVERCLOCK (global) .: 800 MANUAL_FAN ................: NO ALGO_SPECIFIC_OC ..........: YES
GLOBAL_WORKERNAME .........: YES AUTO_WORKERNAME ...........: CUSTOM CUSTOM_WORKERNAME .........: Luise01 plusCPU ...................: NO
ZM_or_EWBF ................: EWBF EWBF_VERSION ..............: 3_4 EWBF_PERCENT ..............: 0
COIN ......................: FTC FTC_WORKER ................: Luise01 FTC_ADDRESS ...............: LuisenMi... FTC_POOL ..................: hub.miningpoolhub.com FTC_PORT ..................: 20510 FTC_INTENSITY .............: 23
PS: When I hit 'bash 3main' it seems like its working but this is only for ETH. iE FTC ccminer starts but doesn't mine. When I do 'bash 3main' I also have to ctrl+C the following error twice in order to continue: INFO:guake.guake_app:Logging configuration complete /usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)
** (guake:3394): WARNING **: Binding 'F12' failed!
Remove the version file from miners folder thats not working and run the miner update script again. Test again and see how it goes. cd /home/m1/Downloads/ wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh bash /home/m1/Downloads/nvOC_miner_update.sh
|
|
|
|
fk1
|
|
June 06, 2018, 11:58:07 AM |
|
1. mining FTC with SPccminer, I can't find a "version" file in the folder. 2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
June 06, 2018, 03:13:11 PM |
|
1. mining FTC with SPccminer, I can't find a "version" file in the folder. 2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?
Does mining starts at boot with other coins? Does gnome-terminal opens and 3main runs when rig starts?
|
|
|
|
sergey1301
Jr. Member
Offline
Activity: 336
Merit: 1
|
|
June 07, 2018, 05:13:23 AM |
|
You will need to enter - edid.bin before nvidia --allow-empty-initial-configuration?? Will you use - Xubuntu, in the updated version?
|
|
|
|
nongkrong
Newbie
Offline
Activity: 45
Merit: 0
|
|
June 08, 2018, 11:49:47 PM |
|
Seem as nice OS for mining rig system. I hope can try it as soon as possible. And i need to learn as fast i can about linux because this basic from linux platform, but I'm sure if i always read from this forum, i'll can learn it. Thank all masters.
|
|
|
|
gs777
Member
Offline
Activity: 118
Merit: 10
|
|
June 09, 2018, 06:41:57 AM |
|
Will there be another ISO version after 2.0? I'm not confident in the process to convert to beta 2.1
Sure when beta testing is done and after stable release Sounds good! My rigs really waiting for it
|
|
|
|
fk1
|
|
June 10, 2018, 06:25:11 AM |
|
1. mining FTC with SPccminer, I can't find a "version" file in the folder. 2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?
Does mining starts at boot with other coins? Does gnome-terminal opens and 3main runs when rig starts? m1@m1-desktop:~$ ps -ef | grep gnome-terminal m1 2246 1641 0 23:22 ? 00:00:00 /usr/lib/gnome-terminal/gnome-te rminal-server m1 2416 2153 0 23:22 pts/16 00:00:00 grep --color=auto gnome-terminal m1@m1-desktop:~$ ps -ef | grep 3main m1 2273 2252 0 23:22 pts/17 00:00:00 bash /home/m1/3main m1 2418 2153 0 23:23 pts/16 00:00:00 grep --color=auto 3main With ethminer after reboot. 1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
June 10, 2018, 08:00:37 AM |
|
1. mining FTC with SPccminer, I can't find a "version" file in the folder. 2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?
Does mining starts at boot with other coins? Does gnome-terminal opens and 3main runs when rig starts? m1@m1-desktop:~$ ps -ef | grep gnome-terminal m1 2246 1641 0 23:22 ? 00:00:00 /usr/lib/gnome-terminal/gnome-te rminal-server m1 2416 2153 0 23:22 pts/16 00:00:00 grep --color=auto gnome-terminal m1@m1-desktop:~$ ps -ef | grep 3main m1 2273 2252 0 23:22 pts/17 00:00:00 bash /home/m1/3main m1 2418 2153 0 23:23 pts/16 00:00:00 grep --color=auto 3main With ethminer after reboot. 1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner. Whats the content of ethminer folder? ll /home/m1/eth/ethminer/latest Run the miner update again without re-compile cd /home/m1/Downloads wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh bash /home/m1/Downloads/nvOC_miner_update.sh
|
|
|
|
fk1
|
|
June 10, 2018, 11:00:46 AM Last edit: June 10, 2018, 12:40:33 PM by fk1 |
|
1. mining FTC with SPccminer, I can't find a "version" file in the folder. 2. If I choose coin=ETH and reboot the rig it doesn't start automatically. What can i do here?
Does mining starts at boot with other coins? Does gnome-terminal opens and 3main runs when rig starts? m1@m1-desktop:~$ ps -ef | grep gnome-terminal m1 2246 1641 0 23:22 ? 00:00:00 /usr/lib/gnome-terminal/gnome-te rminal-server m1 2416 2153 0 23:22 pts/16 00:00:00 grep --color=auto gnome-terminal m1@m1-desktop:~$ ps -ef | grep 3main m1 2273 2252 0 23:22 pts/17 00:00:00 bash /home/m1/3main m1 2418 2153 0 23:23 pts/16 00:00:00 grep --color=auto 3main With ethminer after reboot. 1@m1-desktop:~$ screen -r miner There is no screen to be resumed matching miner. Whats the content of ethminer folder? ll /home/m1/eth/ethminer/latest Run the miner update again without re-compile cd /home/m1/Downloads wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh bash /home/m1/Downloads/nvOC_miner_update.sh ehtminer folder: m1@m1-desktop:~$ ll /home/m1/eth/ethminer/latest total 10664 drwxrwxr-x 2 m1 m1 4096 Jun 5 12:59 ./ drwxrwxr-x 6 m1 m1 4096 Jan 6 12:36 ../ -rwxr-xr-x 1 m1 m1 10904267 May 15 04:35 ethminer* -rwxrwxr-x 1 m1 m1 6 May 15 10:43 version*
Re-Update: m1@m1-desktop:~$ cd /home/m1/Downloads m1@m1-desktop:~/Downloads$ wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh --2018-06-10 04:01:09-- https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 15361 (15K) [text/plain] Saving to: ‘nvOC_miner_update.sh’
nvOC_miner_update.sh 100%[==================================================================================================================>] 15.00K --.-KB/s in 0.009s
Last-modified header missing -- time-stamps turned off. 2018-06-10 04:01:10 (1.66 MB/s) - ‘nvOC_miner_update.sh’ saved [15361/15361]
m1@m1-desktop:~/Downloads$ bash /home/m1/Downloads/nvOC_miner_update.sh Updating miners for nvOC V0019-2.x Stopping miner and watchdog to reduce errors screen killed (pid 2507) screen killed (pid 2792) screen killed (pid 2846)
Reading package lists... Done Building dependency tree Reading state information... Done rar is already the newest version (2:5.3.b2-1). 0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded. Checking Equihash DSTM zm_miner 0.6.1 DSTM zm miner is up-to-date
Checking Claymore v11.8 Claymore is up-to-date
Checking z-enemy 1.10 z-enemy is up-to-date
Checking Tpruvot ccminer-2.2.5 Tpccminer-2.2.5 is up-to-date
Checking MSFT Tpruvot ccminer-2.2.5 (RVN) MSFTccminer-2.2.5 is up-to-date
Checking KlausT ccminer 8.20 KlausT ccminer is up-to-date
Checking Vertminer v1.0-stable.2 Release Vertminer is is up-to-date
Checking nanashi-ccminer-2.2-mod-r2 nanashi-ccminer is up-to-date
Checking Ethminer 0.14.0 ethminer is up-to-date
Checking KTccminer-cryptonight KTccminer-cryptonight is up-to-date
Checking Equihash Bminer cat: /home/m1/zec/bminer/latest/version: No such file or directory Downloading and making changes for Bminer 8.0.0 --2018-06-10 04:01:26-- https://raw.githubusercontent.com/papampi/nvOC_miners/master/Bminer/bminer-v8.0.0.tar.gz Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.0.133, 151.101.64.133, 151.101.128.133, ... Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.0.133|:443... connected. HTTP request sent, awaiting response... 404 Not Found 2018-06-10 04:01:27 ERROR 404: Not Found.
gzip: stdin: unexpected end of file tar: Child returned status 1 tar: Error is not recoverable: exiting now chmod: cannot access '/home/m1/zec/bminer/latest/bminer': No such file or directory Checking ANXccminer ANXccminer is up-to-date
Downloading and checking new miners for nvOC-v0019-2.x finished
Do you want to re-compile your miners (y/N)? N Canceled.. Re starting miner... after reboot, ethminer started automatically. I will test some other miner today, tyvm so far papampi!
|
|
|
|
fk1
|
|
June 10, 2018, 12:07:23 PM Last edit: June 10, 2018, 01:57:06 PM by fk1 |
|
Side question: how do you kill mining process in your update script papampi? I ask for rxOC phenomenom: Sometimes claymore crashes here and I am not able to kill process ethdcrminer64 with kill -9 or other commands. Usually I am not able to rebott the machine with 'reboot -f now'. But your update script worked well in killing the process once. edit: just had more trys with FTC,BTG,ETH and after a couple of reboots no miner starts automatically again gnome-terminal-server and 3main running. e: to make sure I retried update script with recompile. took like an hour for all and this time succeeded. then I redid nvOC patch and after nvOC reboot. Still no autostart miner
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
June 10, 2018, 06:07:39 PM |
|
Side question: how do you kill mining process in your update script papampi? I ask for rxOC phenomenom: Sometimes claymore crashes here and I am not able to kill process ethdcrminer64 with kill -9 or other commands. Usually I am not able to rebott the machine with 'reboot -f now'. But your update script worked well in killing the process once. edit: just had more trys with FTC,BTG,ETH and after a couple of reboots no miner starts automatically again gnome-terminal-server and 3main running. e: to make sure I retried update script with recompile. took like an hour for all and this time succeeded. then I redid nvOC patch and after nvOC reboot. Still no autostart miner No idea how rxOC works, but in nvOC you can stop miner, tempcontrol and watchdog by: Then restart them by: When miner starts it shows the command it used to start it in gnome-terminal, copy the command it shows without screen part (Screen -dmSL miner) and run it manually in a guake tab, see what are the errors.
|
|
|
|
NikoDE
Newbie
Offline
Activity: 3
Merit: 0
|
|
June 12, 2018, 05:37:55 PM |
|
Heyhey! For a few weeks I'm mining zcash on nvoc- NICE OS! Yesterday I started testing the 19.2.1 beta and since updating it today it works fine- for zcash! But know I try mining ETN and this doesn't work. It opens ktccminer cryptonight shouldn't it open xmr- stak I was sure etn also has cryptonightv7. Anyway there are only rejected shares on ktccminer. Perhaps somebody who's not a few weeks of linux new be like me, wants to watch for this point and respond. Thx
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
June 12, 2018, 06:00:22 PM |
|
Heyhey! For a few weeks I'm mining zcash on nvoc- NICE OS! Yesterday I started testing the 19.2.1 beta and since updating it today it works fine- for zcash! But know I try mining ETN and this doesn't work. It opens ktccminer cryptonight shouldn't it open xmr- stak I was sure etn also has cryptonightv7. Anyway there are only rejected shares on ktccminer. Perhaps somebody who's not a few weeks of linux new be like me, wants to watch for this point and respond. Thx
There was a problem in last commit with algo identification in 0miner, update to latest and it should be solved.
|
|
|
|
|