Bitcoin Forum
June 17, 2024, 01:55:06 AM *
News: Voting for pizza day contest
 
   Home   Help Search Login Register More  
Bitcoin Forum > Bitcoin > Mining > Hardware > Discontinued: Lancelot (Heavy Duty 400 Mega hashes, 2 x FPGA Mining Board)
Warning: One or more bitcointalk.org users have reported that they strongly believe that the creator of this topic is a scammer. (Login to see the detailed trust ratings.) While the bitcointalk.org administration does not verify such claims, you should proceed with extreme caution.
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [41] 42 43 44 45 46 47 48 »
« previous topic next topic »
  Print  
Author Topic: Discontinued: Lancelot (Heavy Duty 400 Mega hashes, 2 x FPGA Mining Board)  (Read 86432 times)
setkeh
Newbie
*
Offline Offline

Activity: 40
Merit: 0



View Profile
June 03, 2013, 11:29:43 PM
 #801
Quote from: Bogart on June 03, 2013, 11:18:34 PM
Well, it looks like I spoke a little too soon.  Turns out a couple of the boards have issues.

On ICA 3, one of the white LEDs (DONE2) does not light up, and it only hashes at half speed.

ICA 7 sometimes produces storms of HW errors, and inaccurate hashrate report, though its performance (accepted shares) seems unaffected.

The other 8 are running fine.

I guess I'll find out what warranty support is like.  I foolishly didn't really research it before buying.

Code:
cgminer version 3.1.0 - Started: [2013-06-03 12:44:51]
--------------------------------------------------------------------------------
 (5s):4.424G (avg):4.150Gh/s | A:16076  R:254  HW:1485  U:41.0/m  WU:56.8/m
 ST: 2  SS: 0  NB: 67  LW: 37168  GF: 0  RF: 1
 Connected to mining.eligius.st diff 1 with stratum as user xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 Block: 01001cf35f40e9e7...  Diff:12.2M  Started: [19:08:54]  Best share: 15.2K
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 ICA  0:                | 397.7M/399.8Mh/s | A:1712 R:25 HW:   2 U:  4.37/m
 ICA  1:                | 398.2M/399.7Mh/s | A:1634 R:28 HW:   2 U:  4.17/m
 ICA  2:                | 399.4M/399.6Mh/s | A:1750 R:20 HW:   5 U:  4.47/m
 ICA  3:                | 399.8M/399.7Mh/s | A: 832 R:16 HW:   0 U:  2.12/m
 ICA  4:                | 399.4M/399.6Mh/s | A:1733 R:14 HW:   0 U:  4.42/m
 ICA  5:                | 399.0M/399.4Mh/s | A:1614 R:22 HW:   3 U:  4.12/m
 ICA  6:                | 397.9M/399.8Mh/s | A:1680 R:38 HW:   3 U:  4.29/m
 ICA  7:                | 394.4M/554.0Mh/s | A:1683 R:32 HW:1464 U:  4.30/m
 ICA  8:                | 398.7M/399.6Mh/s | A:1691 R:30 HW:   3 U:  4.32/m
 ICA  9:                | 399.4M/399.6Mh/s | A:1748 R:29 HW:   3 U:  4.46/m
--------------------------------------------------------------------------------

ICA 3 is showing 400MH/s in the pasted output.

In Any case you should update cgminer for a start Cheesy
jimmy3dita
Hero Member
*****
Offline Offline

Activity: 588
Merit: 500



View Profile
June 04, 2013, 08:04:55 AM
 #802
Quote from: Bogart on June 03, 2013, 11:18:34 PM
Well, it looks like I spoke a little too soon.  Turns out a couple of the boards have issues.

On ICA 3, one of the white LEDs (DONE2) does not light up, and it only hashes at half speed.

ICA 7 sometimes produces storms of HW errors, and inaccurate hashrate report, though its performance (accepted shares) seems unaffected.

The other 8 are running fine.

I guess I'll find out what warranty support is like.  I foolishly didn't really research it before buying.

Code:
cgminer version 3.1.0 - Started: [2013-06-03 12:44:51]
--------------------------------------------------------------------------------
 (5s):4.424G (avg):4.150Gh/s | A:16076  R:254  HW:1485  U:41.0/m  WU:56.8/m
 ST: 2  SS: 0  NB: 67  LW: 37168  GF: 0  RF: 1
 Connected to mining.eligius.st diff 1 with stratum as user xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
 Block: 01001cf35f40e9e7...  Diff:12.2M  Started: [19:08:54]  Best share: 15.2K
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 ICA  0:                | 397.7M/399.8Mh/s | A:1712 R:25 HW:   2 U:  4.37/m
 ICA  1:                | 398.2M/399.7Mh/s | A:1634 R:28 HW:   2 U:  4.17/m
 ICA  2:                | 399.4M/399.6Mh/s | A:1750 R:20 HW:   5 U:  4.47/m
 ICA  3:                | 399.8M/399.7Mh/s | A: 832 R:16 HW:   0 U:  2.12/m
 ICA  4:                | 399.4M/399.6Mh/s | A:1733 R:14 HW:   0 U:  4.42/m
 ICA  5:                | 399.0M/399.4Mh/s | A:1614 R:22 HW:   3 U:  4.12/m
 ICA  6:                | 397.9M/399.8Mh/s | A:1680 R:38 HW:   3 U:  4.29/m
 ICA  7:                | 394.4M/554.0Mh/s | A:1683 R:32 HW:1464 U:  4.30/m
 ICA  8:                | 398.7M/399.6Mh/s | A:1691 R:30 HW:   3 U:  4.32/m
 ICA  9:                | 399.4M/399.6Mh/s | A:1748 R:29 HW:   3 U:  4.46/m
--------------------------------------------------------------------------------

I had a similar issue (to the ICA 3) on a Lancelot after the firmware upgrade, basically one of the two Fpga is not hashing. I think you can try to fix it with a Jtag cable and the Xilinx Lab Tools software, instead of sending everything back in China...
Acquista il mio libro "Investire Bitcoin": clicca qui
markm
Legendary
*
Offline Offline

Activity: 2940
Merit: 1090



View Profile WWW
June 04, 2013, 05:34:16 PM
Last edit: June 04, 2013, 05:47:20 PM by markm
 #803
I got my Lancelots, assembled a stack of four of them, git pulled the latest cgminer, but cgminer does not seem able to handle four of them.

I tried switching the fourth one I had turned on with another in case it was a bad board, but it just cannot seem to handle four boards period.

It even gets segfaults, no hardware should be able to segfault the mining program, it has to be something broken with the software.

To compile it with icarus support I had to install libusb-devel, that didn't suffice so also had to install libusb1-devel.

It detects four boards, but then claims they are all zombies and invents another four, claims they are all zombies, invents yet another four and so on, in /tmp it has 90 or more imagined devices from constantly inventing more of them.

So I tried BFGminer. It is even worse, it cannot get anywhere with them, at least with cgminer I had occassionally gotten as many as three of them to work.

I tried starting a second copy of cgminer to try to use just the fourth board, but it basically seemed to be claiming all USB devices were in use or something.

Even only running three it still had problems, else maybe by now I would be setting up four computers to run three boards each.

I am using Fedora Core 17, 64 bit.

The USB cables are plugged into a "USB-HUB 113" 13 ports USB 2.0 hub from NewEgg.

I am now starting to clutch at straws, like wondering how to detect whether the USB port the hub is plugged into on the computer is USB 2.0 or higher or lower...

This is with four boards switched on:

Code:
cgminer version 3.2.0 - Started: [2013-06-04 14:39:38]
--------------------------------------------------------------------------------
 (5s):0.000 (avg):0.000h/s | A:0  R:0  HW:0  U:0.0/m  WU:0.0/m
 ST: 2  SS: 0  NB: 2  LW: 15  GF: 0  RF: 0
 Connected to dvcstable01.dvcnode.org diff 1 with stratum as user markm
 Block: 00a867c089c5f86f...  Diff:12.2M  Started: [14:39:44]  Best share: 0
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 BLT 0:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
 BLT 1:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
 BLT 2:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
 BLT 3:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
 BLT 4:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
 BLT 5:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
 BLT 6:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
 BLT 7:                | ZOMBIE/ 0.000h/s | A:0 R:0 HW:0 U:0.00/m
--------------------------------------------------------------------------------
 [2013-06-04 14:39:38] Pool 0 difficulty changed to 0.999985
 [2013-06-04 14:39:36] Started cgminer 3.2.0
 [2013-06-04 14:39:36] Probing for an alive pool
 [2013-06-04 14:39:37] Switching pool 0 http://dvcstable01.dvcnode.org:10332 to stratum+tcp://dvcstable01.dvcnode.org:10332
 [2013-06-04 14:39:38] Pool 0 difficulty changed to 0.999985
 [2013-06-04 14:39:38] Network diff set to 12.2M
 [2013-06-04 14:39:38] Stratum from pool 0 detected new block
 [2013-06-04 14:39:38] Stratum from pool 0 requested work restart
 [2013-06-04 14:39:38] BLT1: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:39:38] BLT 1 failure, disabling!
 [2013-06-04 14:39:38] Thread 1 being disabled
 [2013-06-04 14:39:38] BLT3: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:39:38] BLT 3 failure, disabling!
 [2013-06-04 14:39:38] Thread 3 being disabled
 [2013-06-04 14:39:38] BLT2: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:39:38] BLT 2 failure, disabling!
 [2013-06-04 14:39:38] Thread 2 being disabled
 [2013-06-04 14:39:38] BLT0: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:39:38] BLT 0 failure, disabling!
 [2013-06-04 14:39:38] Thread 0 being disabled
 [2013-06-04 14:39:44] Hotplug: Icarus added BLT 4
 [2013-06-04 14:39:44] Hotplug: Icarus added BLT 5
 [2013-06-04 14:39:44] Hotplug: Icarus added BLT 6
 [2013-06-04 14:39:44] Hotplug: Icarus added BLT 7
 [2013-06-04 14:39:44] BLT6: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:39:44] BLT 6 failure, disabling!
 [2013-06-04 14:39:44] Thread 6 being disabled
 [2013-06-04 14:39:44] BLT7: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:39:44] BLT 7 failure, disabling!
 [2013-06-04 14:39:44] Thread 7 being disabled
 [2013-06-04 14:39:44] BLT4: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:39:44] BLT 4 failure, disabling!
 [2013-06-04 14:39:44] Thread 4 being disabled
 [2013-06-04 14:39:44] BLT5: Comms error (rerr=-99 amt=1)
 [2013-06-04 14:39:44] BLT 5 failure, disabling!
 [2013-06-04 14:39:44] Thread 5 being disabled
 [2013-06-04 14:39:44] Stratum from pool 0 detected new block

This is with three boards switched on:

Code:
cgminer version 3.2.0 - Started: [2013-06-04 14:42:06]
--------------------------------------------------------------------------------
 (5s):1.136G (avg):1.052Gh/s | A:3  R:0  HW:0  U:7.5/m  WU:7.5/m
 ST: 2  SS: 0  NB: 1  LW: 58  GF: 0  RF: 0
 Connected to dvcstable01.dvcnode.org diff 1 with stratum as user markm
 Block: 015c96c433dfafd6...  Diff:12.2M  Started: [14:42:06]  Best share: 1
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 BLT 0:                | 377.3M/446.4Mh/s | A:0 R:0 HW:0 U:0.00/m
 BLT 1:                | 388.9M/446.8Mh/s | A:2 R:0 HW:0 U:5.00/m
 BLT 2:                | 382.8M/445.4Mh/s | A:1 R:0 HW:0 U:2.50/m
--------------------------------------------------------------------------------

 [2013-06-04 14:42:04] Started cgminer 3.2.0
 [2013-06-04 14:42:04] Probing for an alive pool
 [2013-06-04 14:42:05] Switching pool 0 http://dvcstable01.dvcnode.org:10332 to stratum+tcp://dvcstable01.dvcnode.org:10332
 [2013-06-04 14:42:06] Pool 0 difficulty changed to 0.999985
 [2013-06-04 14:42:06] Network diff set to 12.2M
 [2013-06-04 14:42:06] Stratum from pool 0 detected new block
 [2013-06-04 14:42:06] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:15] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:16] Accepted c51a3f40 Diff 1/1 BLT 1
 [2013-06-04 14:42:17] Accepted a0edcbdd Diff 1/1 BLT 1
 [2013-06-04 14:42:19] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:22] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:22] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:23] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:27] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:27] Stratum from pool 0 requested work restart
 [2013-06-04 14:42:28] Accepted ea6b69c4 Diff 1/1 BLT 2
 [2013-06-04 14:42:33] Stratum from pool 0 requested work restart

This is same three boards run a few minutes later:

Code:
cgminer version 3.2.0 - Started: [2013-06-04 14:42:06]
--------------------------------------------------------------------------------
 (5s):1.414G (avg):983.3Mh/s | A:41  R:14  HW:0  U:10.3/m  WU:13.8/m
 ST: 2  SS: 0  NB: 1  LW: 320  GF: 0  RF: 0
 Connected to dvcstable01.dvcnode.org diff 1 with stratum as user markm
 Block: 015c96c433dfafd6...  Diff:12.2M  Started: [14:42:06]  Best share: 22
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 BLT 24:                | 284.3M/7.118Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT 25:                | 253.1M/7.158Mh/s | A:0 R:0 HW:0 U:0.00/m
 BLT 26:                | 252.5M/7.149Mh/s | A:0 R:0 HW:0 U:0.00/m
 BLT  0:                | ZOMBIE/134.9Mh/s | A:8 R:2 HW:0 U:2.01/m
 BLT  1:                | ZOMBIE/152.2Mh/s | A:5 R:1 HW:0 U:1.25/m
 BLT  2:                | ZOMBIE/139.9Mh/s | A:4 R:0 HW:0 U:1.00/m
 BLT  3:                | ZOMBIE/29.34Mh/s | A:2 R:0 HW:0 U:0.50/m
 BLT  4:                | ZOMBIE/22.48Mh/s | A:0 R:0 HW:0 U:0.00/m
 BLT  5:                | ZOMBIE/24.71Mh/s | A:2 R:0 HW:0 U:0.50/m
 BLT  6:                | ZOMBIE/27.40Mh/s | A:1 R:3 HW:0 U:0.25/m
 BLT  7:                | ZOMBIE/26.14Mh/s | A:1 R:1 HW:0 U:0.25/m
 BLT  8:                | ZOMBIE/26.20Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT  9:                | ZOMBIE/31.17Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT 10:                | ZOMBIE/31.16Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT 11:                | ZOMBIE/33.91Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT 12:                | ZOMBIE/26.84Mh/s | A:2 R:0 HW:0 U:0.50/m
 BLT 13:                | ZOMBIE/27.05Mh/s | A:1 R:2 HW:0 U:0.25/m
 BLT 14:                | ZOMBIE/19.46Mh/s | A:1 R:2 HW:0 U:0.25/m
 BLT 15:                | ZOMBIE/30.27Mh/s | A:2 R:0 HW:0 U:0.50/m
 BLT 16:                | ZOMBIE/26.96Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT 17:                | ZOMBIE/27.05Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT 18:                | ZOMBIE/16.08Mh/s | A:2 R:1 HW:0 U:0.50/m
 BLT 19:                | ZOMBIE/15.41Mh/s | A:2 R:0 HW:0 U:0.50/m
 BLT 20:                | ZOMBIE/15.58Mh/s | A:1 R:0 HW:0 U:0.25/m
 BLT 21:                | ZOMBIE/30.80Mh/s | A:0 R:1 HW:0 U:0.00/m
 BLT 22:                | ZOMBIE/30.89Mh/s | A:0 R:0 HW:0 U:0.00/m
 BLT 23:                | ZOMBIE/30.83Mh/s | A:1 R:1 HW:0 U:0.25/m
--------------------------------------------------------------------------------
 [2013-06-04 14:45:38] Icarus detect (1:17) failed to initialise (incorrect device?)
 [2013-06-04 14:45:42] Stratum from pool 0 requested work restart
 [2013-06-04 14:45:47] Stratum from pool 0 requested work restart
 [2013-06-04 14:45:47] Rejected b8a66558 Diff 1/1 BLT 21
 [2013-06-04 14:45:52] Stratum from pool 0 requested work restart
 [2013-06-04 14:45:57] Accepted e09a8637 Diff 1/1 BLT 23
 [2013-06-04 14:46:00] Stratum from pool 0 requested work restart
 [2013-06-04 14:46:02] Stratum from pool 0 requested work restart
 [2013-06-04 14:46:02] Rejected f6aabd54 Diff 1/1 BLT 23
 [2013-06-04 14:46:02] BLT22: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:46:02] BLT 22 failure, disabling!
 [2013-06-04 14:46:02] Thread 22 being disabled
 [2013-06-04 14:46:02] BLT21: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:46:02] BLT 21 failure, disabling!
 [2013-06-04 14:46:02] Thread 21 being disabled
 [2013-06-04 14:46:02] BLT23: Comms error (rerr=-99 amt=0)
 [2013-06-04 14:46:02] BLT 23 failure, disabling!
 [2013-06-04 14:46:02] Thread 23 being disabled
 [2013-06-04 14:46:05] Stratum from pool 0 requested work restart
 [2013-06-04 14:46:06] Accepted eeb8c4a8 Diff 1/1 BLT 24
 [2013-06-04 14:46:08] Stratum from pool 0 requested work restart

-MarkM-
Browser-launched Crossfire client now online (select CrossCiv server for Galactic  Milieu)
Free website hosting with PHP, MySQL etc: http://hosting.knotwork.com/
blackarrow (OP)
Hero Member
*****
Offline Offline

Activity: 532
Merit: 500


View Profile WWW
June 04, 2013, 05:37:43 PM
 #804
Quote from: Bogart on June 03, 2013, 11:18:34 PM
Code:
 ICA  7:                | 394.4M/554.0Mh/s | A:1683 R:32 HW:1464 U:  4.30/m

This looks to be running v42 firmware. Please put the 200Mhz firmware if you do not want many hardware errors.
We manufacture Bitcoin ASICs and Bitcoin mining equipment.
http://www.blackarrowsoftware.com
markm
Legendary
*
Offline Offline

Activity: 2940
Merit: 1090



View Profile WWW
June 04, 2013, 06:04:27 PM
 #805
Aha, Luke-Jr on #bitcoin-mining on Freenode helped me, saying cgminer must have trashed the driver(s), unplug the hub from the computer plug it back in and try bfgminer again. I did and am now seeing much nicer display:

Code:
ICA 0:                | 446.7/355.8/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 1:                | 448.5/356.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 2:                | 446.9/356.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 3:                | 447.0/339.5/  0.0Mh/s | A:0 R:0+0(none) HW:0

Looks pretty nice for purportedly 400 MHash devices! Smiley

In fairness, I would not be surprised if now the USB drivers are reset, cgminer might also be able to work now.

But I am going to unpack and set up more of my boards before bothering to check that. Smiley

EDIT: Oops, no, its gone againgminer this time):

Code:
bfgminer version 3.0.99 - Started: [2013-06-04 15:00:56] - [  0 days 00:07:40]
--------------------------------------------------------------------------------
 5s:  0.8 avg:801.7 u:  9.3 Mh/s | A:1 R:0+0(none) HW:0
 ST: 2  GF: 0  NB: 1  AS: 0  RF: 0  E: 0.00  U:0.1/m  BS:2
 Connected to dvcstable01.dvcnode.org diff 1 with stratum as user markm
 Block: ...cca90e45 #239734  Diff:12.2M (87.00Th/s)  Started: [15:00:56]
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 ICA 0:                |  ERR /201.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 1:                |  ERR /200.9/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 2:                |  ERR /202.1/  9.3Mh/s | A:1 R:0+0(none) HW:0
 ICA 3:                |  ERR /197.6/  0.0Mh/s | A:0 R:0+0(none) HW:0
--------------------------------------------------------------------------------

 [2013-06-04 15:08:29] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:29] ICA 2 failure, attempting to reinitialize
 [2013-06-04 15:08:29] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:29] ICA 2 failure, disabling!
 [2013-06-04 15:08:29] ICA 2 being disabled
 [2013-06-04 15:08:29] ICA1: Comms error
 [2013-06-04 15:08:29] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:29] ICA1: Comms error
 [2013-06-04 15:08:29] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:29] ICA 1 failure, attempting to reinitialize
 [2013-06-04 15:08:29] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:29] ICA 1 failure, disabling!
 [2013-06-04 15:08:29] ICA 1 being disabled
 [2013-06-04 15:08:29] ICA0: Comms error
 [2013-06-04 15:08:29] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:29] ICA0: Comms error
 [2013-06-04 15:08:29] ICA 0: Failed to reopen on /dev/ttyUSB2
 [2013-06-04 15:08:29] ICA 0 failure, attempting to reinitialize
 [2013-06-04 15:08:29] ICA 0: Failed to reopen on /dev/ttyUSB2
 [2013-06-04 15:08:29] ICA 0 failure, disabling!
 [2013-06-04 15:08:29] ICA 0 being disabled
 [2013-06-04 15:08:36] Attempting to reinitialize ICA 0
 [2013-06-04 15:08:36] Attempting to reinitialize ICA 1
 [2013-06-04 15:08:36] ICA 0 being re-enabled
 [2013-06-04 15:08:36] Attempting to reinitialize ICA 2
 [2013-06-04 15:08:36] ICA 2 being re-enabled
 [2013-06-04 15:08:36] ICA 1 being re-enabled
 [2013-06-04 15:08:37] ICA0: Comms error
 [2013-06-04 15:08:37] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:37] ICA0: Comms error
 [2013-06-04 15:08:37] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:37] ICA 2 failure, attempting to reinitialize
 [2013-06-04 15:08:37] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:37] ICA 2 failure, disabling!
 [2013-06-04 15:08:37] ICA 2 being disabled
 [2013-06-04 15:08:37] ICA1: Comms error
 [2013-06-04 15:08:37] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:37] ICA1: Comms error
 [2013-06-04 15:08:37] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:37] ICA 1 failure, attempting to reinitialize
 [2013-06-04 15:08:37] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:37] ICA 1 failure, disabling!
 [2013-06-04 15:08:37] ICA 1 being disabled

-MarkM-
Browser-launched Crossfire client now online (select CrossCiv server for Galactic  Milieu)
Free website hosting with PHP, MySQL etc: http://hosting.knotwork.com/
turtle83
Sr. Member
****
Offline Offline

Activity: 322
Merit: 250


Supersonic


View Profile WWW
June 04, 2013, 06:05:52 PM
 #806
Quote from: markm on June 04, 2013, 05:34:16 PM
I am using Fedora Core 17, 64 bit.

Try cgminer 3.1.1 . (unplug and re-plug the usb cables after stopping 3.2.0). 3.2.0 has issues with natively using usb for block erruptors, maybe the same issue for lancelot, since both are Icaracus.
FPGA/ASIC only: Raspberry pi packages for cgminer | Ubuntu PPA for mining related software
turtle83
Sr. Member
****
Offline Offline

Activity: 322
Merit: 250


Supersonic


View Profile WWW
June 04, 2013, 06:07:04 PM
 #807
Quote from: markm on June 04, 2013, 06:04:27 PM
Aha, Luke-Jr on #bitcoin-mining on Freenode helped me, saying cgminer must have trashed the driver(s), unplug the hub from the computer plug it back in and try bfgminer again. I did and am now seeing much nicer display:

Code:
ICA 0:                | 446.7/355.8/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 1:                | 448.5/356.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 2:                | 446.9/356.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 3:                | 447.0/339.5/  0.0Mh/s | A:0 R:0+0(none) HW:0

Looks pretty nice for purportedly 400 MHash devices! Smiley

In fairness, I would not be surprised if now the USB drivers are reset, cgminer might also be able to work now.

But I am going to unpack and set up more of my boards before bothering to check that. Smiley

-MarkM-

By default ICA when hooked in gets mapped as a serial port device ttyUSBx . Cgminer 3.2.0 unmaps that so that it can directly talk to it. This "enhancement" is broken for linux....
FPGA/ASIC only: Raspberry pi packages for cgminer | Ubuntu PPA for mining related software
markm
Legendary
*
Offline Offline

Activity: 2940
Merit: 1090



View Profile WWW
June 04, 2013, 06:13:46 PM
 #808
Hmmm how would I tell git to roll me back to 3.1 ?

-MarkM-
Browser-launched Crossfire client now online (select CrossCiv server for Galactic  Milieu)
Free website hosting with PHP, MySQL etc: http://hosting.knotwork.com/
turtle83
Sr. Member
****
Offline Offline

Activity: 322
Merit: 250


Supersonic


View Profile WWW
June 04, 2013, 06:20:33 PM
 #809
Quote from: markm on June 04, 2013, 06:13:46 PM
Hmmm how would I tell git to roll me back to 3.1 ?

-MarkM-


download tarball from http://ck.kolivas.org/apps/cgminer/ (whenever it comes back online)
FPGA/ASIC only: Raspberry pi packages for cgminer | Ubuntu PPA for mining related software
Bogart
Legendary
*
Offline Offline

Activity: 966
Merit: 1000


View Profile
June 04, 2013, 07:07:54 PM
 #810
Quote from: markm on June 04, 2013, 06:13:46 PM
Hmmm how would I tell git to roll me back to 3.1 ?

-MarkM-


'cd cgminer'
'git checkout v3.1.0'


If you're having trouble running 4 boards at once, check your power supply, and try a different one or two.
"All safe deposit boxes in banks or financial institutions have been sealed... and may only be opened in the presence of an agent of the I.R.S." - President F.D. Roosevelt, 1933
Bogart
Legendary
*
Offline Offline

Activity: 966
Merit: 1000


View Profile
June 04, 2013, 07:09:30 PM
 #811
Quote from: blackarrow on June 04, 2013, 05:37:43 PM
Quote from: Bogart on June 03, 2013, 11:18:34 PM
Code:
 ICA  7:                | 394.4M/554.0Mh/s | A:1683 R:32 HW:1464 U:  4.30/m

This looks to be running v42 firmware. Please put the 200Mhz firmware if you do not want many hardware errors.

I didn't change the firmware since receiving them.  Is it easy to change?  I have a Xilinx Platform Cable, though I've never used it...

I'll get out the included Lancelot manual and RTFM when I get home in case it tells me.
"All safe deposit boxes in banks or financial institutions have been sealed... and may only be opened in the presence of an agent of the I.R.S." - President F.D. Roosevelt, 1933
markm
Legendary
*
Offline Offline

Activity: 2940
Merit: 1090



View Profile WWW
June 04, 2013, 07:30:39 PM
Last edit: June 05, 2013, 12:43:07 AM by markm
 #812
Quote from: Bogart on June 04, 2013, 07:07:54 PM
Quote from: markm on June 04, 2013, 06:13:46 PM
Hmmm how would I tell git to roll me back to 3.1 ?

-MarkM-


'cd cgminer'
'git checkout v3.1.0'


If you're having trouble running 4 boards at once, check your power supply, and try a different one or two.

3.1 claims all devices are disabled, it cannot see anything out there even with -S all.

Doing checkout for 3.1.1 I get

[2013-06-04 16:33:03] Started cgminer 3.1.0
 [2013-06-04 16:33:03] Icarus Detect: Failed to open all
 [2013-06-04 16:33:03] All devices disabled, cannot mine!

So it apparently does not even know its own version number.

-MarkM-

EDIT: I tried another power supply, as I have one per four boards, shipped with the boards, supplies supposedly specifically for powering four boards each.

Second one I tried also did not handle four.

But, powering only three with the first brick and the fourth with the second brick I now have all four working! Thanksfor the power tip!

It seems maybe these bricks they say will power four can maybe only do three for some reason. Maybe they put in a more intense bitstream? Or maybe my power from the wall here in Halifax isn't up to par? When they test the boards do they actually test them (or any) using these power supplies? Seems to me I saw great big silvery things in the king kong attack picture that looked like they were maybe power supplies? So maybe the assertion that these bricks can power four boards is out of date or only applies if you downclock or something?

I should have bought one brick per three boards instead of one per four boards by the look of it...

EDIT2: Even three boards can be too much sometimes it seems. One of them I was able to get it to power three boards by restarting, but another even restarting did not do the trick so I left it at two boards. The bricks say on them 12 volts 10 amps, so I guess in theory they ought to be able to power four boards. So I ended up running a stack of eight boards on the three bricks and pulling an ATX out of a past-end-of-life old 32-bit machine to power a stack of the other four boards. (I only got twelve of them.) If I get more I won't bother with the bricks, the paperclick trick on an ATX power supply is too easy and beyond-end-of-life computers are easy to come by; I have another right here already in fact, or one that is darn close it it anyway.
Browser-launched Crossfire client now online (select CrossCiv server for Galactic  Milieu)
Free website hosting with PHP, MySQL etc: http://hosting.knotwork.com/
setkeh
Newbie
*
Offline Offline

Activity: 40
Merit: 0



View Profile
June 05, 2013, 02:08:10 AM
 #813
Quote from: markm on June 04, 2013, 06:04:27 PM
Aha, Luke-Jr on #bitcoin-mining on Freenode helped me, saying cgminer must have trashed the driver(s), unplug the hub from the computer plug it back in and try bfgminer again. I did and am now seeing much nicer display:

Code:
ICA 0:                | 446.7/355.8/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 1:                | 448.5/356.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 2:                | 446.9/356.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 3:                | 447.0/339.5/  0.0Mh/s | A:0 R:0+0(none) HW:0

Looks pretty nice for purportedly 400 MHash devices! Smiley

In fairness, I would not be surprised if now the USB drivers are reset, cgminer might also be able to work now.

But I am going to unpack and set up more of my boards before bothering to check that. Smiley

EDIT: Oops, no, its gone againgminer this time):

Code:
bfgminer version 3.0.99 - Started: [2013-06-04 15:00:56] - [  0 days 00:07:40]
--------------------------------------------------------------------------------
 5s:  0.8 avg:801.7 u:  9.3 Mh/s | A:1 R:0+0(none) HW:0
 ST: 2  GF: 0  NB: 1  AS: 0  RF: 0  E: 0.00  U:0.1/m  BS:2
 Connected to dvcstable01.dvcnode.org diff 1 with stratum as user markm
 Block: ...cca90e45 #239734  Diff:12.2M (87.00Th/s)  Started: [15:00:56]
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 ICA 0:                |  ERR /201.1/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 1:                |  ERR /200.9/  0.0Mh/s | A:0 R:0+0(none) HW:0
 ICA 2:                |  ERR /202.1/  9.3Mh/s | A:1 R:0+0(none) HW:0
 ICA 3:                |  ERR /197.6/  0.0Mh/s | A:0 R:0+0(none) HW:0
--------------------------------------------------------------------------------

 [2013-06-04 15:08:29] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:29] ICA 2 failure, attempting to reinitialize
 [2013-06-04 15:08:29] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:29] ICA 2 failure, disabling!
 [2013-06-04 15:08:29] ICA 2 being disabled
 [2013-06-04 15:08:29] ICA1: Comms error
 [2013-06-04 15:08:29] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:29] ICA1: Comms error
 [2013-06-04 15:08:29] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:29] ICA 1 failure, attempting to reinitialize
 [2013-06-04 15:08:29] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:29] ICA 1 failure, disabling!
 [2013-06-04 15:08:29] ICA 1 being disabled
 [2013-06-04 15:08:29] ICA0: Comms error
 [2013-06-04 15:08:29] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:29] ICA0: Comms error
 [2013-06-04 15:08:29] ICA 0: Failed to reopen on /dev/ttyUSB2
 [2013-06-04 15:08:29] ICA 0 failure, attempting to reinitialize
 [2013-06-04 15:08:29] ICA 0: Failed to reopen on /dev/ttyUSB2
 [2013-06-04 15:08:29] ICA 0 failure, disabling!
 [2013-06-04 15:08:29] ICA 0 being disabled
 [2013-06-04 15:08:36] Attempting to reinitialize ICA 0
 [2013-06-04 15:08:36] Attempting to reinitialize ICA 1
 [2013-06-04 15:08:36] ICA 0 being re-enabled
 [2013-06-04 15:08:36] Attempting to reinitialize ICA 2
 [2013-06-04 15:08:36] ICA 2 being re-enabled
 [2013-06-04 15:08:36] ICA 1 being re-enabled
 [2013-06-04 15:08:37] ICA0: Comms error
 [2013-06-04 15:08:37] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:37] ICA0: Comms error
 [2013-06-04 15:08:37] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:37] ICA 2 failure, attempting to reinitialize
 [2013-06-04 15:08:37] ICA 2: Failed to reopen on /dev/ttyUSB0
 [2013-06-04 15:08:37] ICA 2 failure, disabling!
 [2013-06-04 15:08:37] ICA 2 being disabled
 [2013-06-04 15:08:37] ICA1: Comms error
 [2013-06-04 15:08:37] Icarus: Error adding work restart fd to epoll
 [2013-06-04 15:08:37] ICA1: Comms error
 [2013-06-04 15:08:37] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:37] ICA 1 failure, attempting to reinitialize
 [2013-06-04 15:08:37] ICA 1: Failed to reopen on /dev/ttyUSB1
 [2013-06-04 15:08:37] ICA 1 failure, disabling!
 [2013-06-04 15:08:37] ICA 1 being disabled

-MarkM-

OFC Luke-Jr would say that :/

Code:
 cgminer version 3.2.0 - Started: [2013-06-03 16:37:57]
--------------------------------------------------------------------------------
 (5s):4.119G (avg):3.911Gh/s | A:86424  R:273  HW:656  U:41.8/m  WU:54.9/m
 ST: 2  SS: 37  NB: 309  LW: 113517  GF: 132  RF: 36
 Connected to MyPool diff 1 with stratum as user setkeh.fpga
 Block: 01433383e9bfa3ba...  Diff:12.2M  Started: [02:56:59]  Best share: 162K
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 BLT  0:                | 388.2M/391.2Mh/s | A:8727 R:23 HW:53 U: 4.22/m
 BLT  1:                | 394.1M/391.7Mh/s | A:8702 R:33 HW:61 U: 4.21/m
 BLT  2:                | 394.6M/391.8Mh/s | A:8677 R:39 HW:63 U: 4.20/m
 BLT  3:                | 395.8M/391.4Mh/s | A:8605 R:17 HW:73 U: 4.16/m
 BLT  4:                | 395.5M/390.9Mh/s | A:8631 R:29 HW:71 U: 4.17/m
 BLT  5:                | 395.5M/390.9Mh/s | A:8685 R:21 HW:63 U: 4.20/m
 BLT  6:                | 394.8M/390.9Mh/s | A:8699 R:35 HW:71 U: 4.21/m
 BLT  7:                | 394.6M/390.5Mh/s | A:8495 R:33 HW:62 U: 4.11/m
 BLT  8:                | 376.7M/391.2Mh/s | A:8570 R:21 HW:61 U: 4.14/m
 BLT  9:                | 397.1M/391.2Mh/s | A:8633 R:22 HW:78 U: 4.17/m
--------------------------------------------------------------------------------
As you can see im running 10 Units comfortably in cgminer
how are you starting cgminer and what did you put into the config??
blackarrow (OP)
Hero Member
*****
Offline Offline

Activity: 532
Merit: 500


View Profile WWW
June 05, 2013, 05:23:08 AM
Last edit: June 05, 2013, 10:51:56 AM by blackarrow
 #814
News: It looks like we're going to receive a batch of Spartan 6 FPGAs sooner therefore all orders scheduled for 27/06 will be shipped on 17/06.

Update: Xilinx informed us that they cannot deliver now the large batch and do not know when they can deliver.

Morale: Do not rely on Xilinx official channels! Our luck is that we've placed multiple orders through different channels so we're still on track with the 27/06 delivery.

Maybe we need to make a product with Altera's FPGAs; Xilinx is obviously not reliable.

We've received the small batch of FPGAs from a 3rd party as scheduled. We're starting manufacturing tomorrow so we'll ship on 13th of June. The delay is due to China's Official Holidays 10-12 (Dragon Boat Festival).
We manufacture Bitcoin ASICs and Bitcoin mining equipment.
http://www.blackarrowsoftware.com
helipotte
Hero Member
*****
Offline Offline

Activity: 650
Merit: 500


Pick and place? I need more coffee.


View Profile
June 05, 2013, 02:33:38 PM
 #815
I have a pending order for 10 units.  If I pay between now and June 10 would mine ship on the 13th?

Thanx! Grin
jimmy3dita
Hero Member
*****
Offline Offline

Activity: 588
Merit: 500



View Profile
June 05, 2013, 08:44:51 PM
 #816
Quote from: blackarrow on June 05, 2013, 05:23:08 AM
News: It looks like we're going to receive a batch of Spartan 6 FPGAs sooner therefore all orders scheduled for 27/06 will be shipped on 17/06.

Update: Xilinx informed us that they cannot deliver now the large batch and do not know when they can deliver.

Morale: Do not rely on Xilinx official channels! Our luck is that we've placed multiple orders through different channels so we're still on track with the 27/06 delivery.

Maybe we need to make a product with Altera's FPGAs; Xilinx is obviously not reliable.

We've received the small batch of FPGAs from a 3rd party as scheduled. We're starting manufacturing tomorrow so we'll ship on 13th of June. The delay is due to China's Official Holidays 10-12 (Dragon Boat Festival).


go full throttle on Asics, the time has come!  Grin
Acquista il mio libro "Investire Bitcoin": clicca qui
jimmy3dita
Hero Member
*****
Offline Offline

Activity: 588
Merit: 500



View Profile
June 05, 2013, 08:56:57 PM
 #817
Pimp My Rig - episode 4

Today I received the new Papst 512 fans: small, high flow, ball-bearing, for heavy duty applications and long MTBF.

Most probably they will outlast the FPGAs, I'll end using them on my next bitcoin creature  Grin

Some pics (no more pyramid, sorry):




Installed on the heatskinks, with some "lateral help" Smiley





Note that the Sunbeam fans are a trophy from the good old modding times, I don't know how many people here was passionate (10 years ago) about overclock and modding Grin
Acquista il mio libro "Investire Bitcoin": clicca qui
iamthekey
Newbie
*
Offline Offline

Activity: 36
Merit: 0


View Profile
June 06, 2013, 10:13:50 PM
Last edit: June 06, 2013, 10:33:27 PM by iamthekey
 #818
Wher can download 200 Mhz mcs?
EsDva
Newbie
*
Offline Offline

Activity: 23
Merit: 0


View Profile
June 07, 2013, 07:40:06 AM
 #819
http://www.cardreaderfactory.com/download/lancelot/lancelot_firmware.rar
kano
Legendary
*
Offline Offline

Activity: 4522
Merit: 1844


Linux since 1997 RedHat 4


View Profile
June 07, 2013, 12:45:09 PM
 #820
Update to cgminer - new version 3.2.1
Should see a reduction in errors and the display now shows new hotplug devices
(and displays all zombie devices last)
... among other changes Smiley
https://bitcointalk.org/index.php?topic=28402.msg2397710#msg2397710
Pool: https://kano.is - low 0.5% fee PPLNS 3 Days - Most reliable Solo with ONLY 0.5% fee   Bitcointalk thread: Forum
Discord support invite at https://kano.is/ Majority developer of the ckpool code - k for kano
The ONLY active original developer of cgminer. Original master git: https://github.com/kanoi/cgminer
Pages: « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [41] 42 43 44 45 46 47 48 »
  Print  
Bitcoin Forum > Bitcoin > Mining > Hardware > Discontinued: Lancelot (Heavy Duty 400 Mega hashes, 2 x FPGA Mining Board)
« previous topic next topic »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!