EvilMonkey
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 03:09:37 AM |
|
So I finally got all my gear and have reduced my rigs down to 2 instead of three. I now have a one open air 4 GPU rig. It is running on an 5 year old Motherboard with a I5 2500-k CPU. I used to use for gaming. It has 2 large PCI-e slots and 2 small. I had to use 2 risers. It is running 3x 1080ti and 1x 1080. It produces 2500 Sol on EWBF Three 1080ti's running at 75% tpd and 1080 running at 65% tpd. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FVe7tC6C.jpg&t=665&c=q81hr4RWSEaFbQ) I now plan to start a second rig with other old gear I have. Thanks for all the help. Has saved me alot of money not having to buy motherboards/cpu/ram.
|
|
|
|
Katimand
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 07:14:22 AM |
|
Just doing some catchup on my reading, since a number of us here at Phil's thread use Nicehash... pls read How will the possible Bitcoin UASF, BIP148, BIP149 and SegWit2x affect you2017-06-19 https://new.nicehash.com/news/174@Marvell1 After running ETH farm for nearly 2 years now.... I learnt an important lesson, esp if you have 20-30 rigs farm. Rule No 1 -- always under clock, and under-volt (modded ROMs for low power higher hash if necessary) Your gear will last longer this way. Substantial savings on power bill too. You can manage the cooling solution better. Rule No 2 -- never dual mine otherwise hell will break loose sooner or later. Sure you get a few more bucks for the 2nd coin.... but the RX isn't really optimized for the 2nd coin in Claymore's list. When the profitability is better, I usually get my non-RX rigs, like Nanos and 390s, to mine DCR, ZEC and others directly Rule No 3 -- always use the best card for the best coin type. While all my AMDs are ETH mining.... all my 1080tis are mining exclusively ZEC, because simply NVIDIA cards are very good for ZEC Very good info, you are right I had around 40 nanos dual mining dc all of last year and only 20 of them are still alive, on the RX cards I have only fried a few so i dual mine with the higer end 480s but you are right i can tell the cards are dying slowing due to the summer heat. My question is why do you care if they die ? I just RMA them since they are only 1 or two years old ? on 3) yeah you are right Nvidia is way better on ZEC but I have found dual mining with 1070s and 1080tis is basically close to a wash in profitablity since the 1000 series does not really use much more power dual mining compared to the RX cards ? That being said my 20 remaining nanos are stil dual mining SIA and Eth, mostly because I cant downgrade my drivers to mine ZEC , I have 20 i need to RMA though I keep putting it off. I think it is better to mine with safe clocks. When you have to RMA, it takes time and hurt your profit.
|
|
|
|
JustCauseBIH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 91
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 07:37:53 AM |
|
I had this morning new strange issue with another rig. All was up-time more than 50h but suddenly miner hash work was not detected by poool. My miner was still working with full hash power, without error or anything similar, but mining pool did not registered has work rate. Interesting, effective hash rate was there, but not current. Any thoughts on this? Issue was sorted with miner restart. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimage.prntscr.com%2Fimage%2FygmOJ4cVTzul8TIlimH66A.png&t=665&c=uRIi1DbDq1kGsA)
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 07:40:46 AM |
|
which pool? Its pool code may have a bug like zpool has.
every once a while after mining miners turn into ghosts until they reconnect.
no clue why yet.
Still get active credit and overall hashrate by share reported though.
|
|
|
|
flminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 07:49:15 AM |
|
which pool? Its pool code may have a bug like zpool has.
every once a while after mining miners turn into ghosts until they reconnect.
no clue why yet.
Still get active credit and overall hashrate by share reported though.
So even though zpool is saying my hash rate is way down as long as my miners are doing normal hashrate the full hash is still accepted by the pool and paid accordingly? Have been seeing this off and on for a few days now on skein. Hash drops, comes back to normal, drops again. Does that for a few hours then goes to normal running again. But have not seen the dips in the 24hr earnings graph.
|
|
|
|
JustCauseBIH
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 91
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 07:55:05 AM |
|
Thanks for reply.
Pool is ethermine.org and this was first time ever i saw error like this. Even my telegram bot reported 0 current hash rate, but effective rate was unaffected.
Fix was to restart miner, and this issue lasted 30 minutes.
|
|
|
|
JaredKaragen
Legendary
Offline
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 07:57:06 AM |
|
which pool? Its pool code may have a bug like zpool has.
every once a while after mining miners turn into ghosts until they reconnect.
no clue why yet.
Still get active credit and overall hashrate by share reported though.
So even though zpool is saying my hash rate is way down as long as my miners are doing normal hashrate the full hash is still accepted by the pool and paid accordingly? Have been seeing this off and on for a few days now on skein. Hash drops, comes back to normal, drops again. Does that for a few hours then goes to normal running again. But have not seen the dips in the 24hr earnings graph. thats luck fluctuating; lower hashrates means you got the unlucky shares.... higher shows the lucky shares.. The pool as a whole is still being just as lucky as before so profitability is the same steady rise. if your machine is stable; then im sure its just that.
|
|
|
|
kopija
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 08:14:44 AM |
|
Selling? Im selling hardware and BTCright now because I have medical and other expenses that are drowning me..... that's the prime reason. I have been heavily investing in alts; but not in the usual way this last month. My trading account has fluctuated in the last 2 weeks by as much as 33% mainly on the larger more traded coins; but; it always bounces right back up to where it was when all this mess started.... which is just around the highest its ever been. My experiments most recently with buying "offline" coins on yobit for the shakeup has definitely be successful. They seem to be BTC resistant and more resistant to market flux. In all reality, its more profitable because people are apt to dump theirs at bottom satoshi when they feel the need to move funds around. NKA on yobit being a prime example. 0.00000003-0.00000006 trading for weeks in that coin. Superb profit. Granted; a lot of them are still @1, but that's not a loss; and almost all that I buy so cheap, have an active buying market, so I technically only risk a touch above 0.004% loss (on yobit via tx/order fee) if I have to sell back at bottom satoshi ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) For all the BTC I am still holding when the fork comes about; all of it will be on my ledger, aside from what I keep on the exchange tied up in buy/sell orders. I want ot be prepared for the market to swing in either direction. The market is the risk originally; so I understand my reasoning and actions. My hardware; I am just cleaning out the Maxwell gear and making room for Pascal cards. I typically host cards for people I personally know at a % split. Eventually, Ill end up buying the card(s) from them and they have been more than happy with the profits in the end... and Ill run them until I need room, and then craigslist them. I consider myself to not be poor, contrary to what people around me think. I don't have a bankroll, and I honestly barely get on day by day sometimes. Tis the life I was given, and I make the best of it. No matter how the market goes; Ill still be in it. No matter how the mining scene goes, Ill still be in it. I just stay focused on both sides of the line... past present and future tenses. Spoken like a True Miner. Hope your health issues resolve soon.
|
we are nothing but a smart contracts on a cosmic blockchain
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 08:59:09 AM |
|
Just doing some catchup on my reading, since a number of us here at Phil's thread use Nicehash... pls read How will the possible Bitcoin UASF, BIP148, BIP149 and SegWit2x affect you2017-06-19 https://new.nicehash.com/news/174@Marvell1 After running ETH farm for nearly 2 years now.... I learnt an important lesson, esp if you have 20-30 rigs farm. Rule No 1 -- always under clock, and under-volt (modded ROMs for low power higher hash if necessary) Your gear will last longer this way. Substantial savings on power bill too. You can manage the cooling solution better. Rule No 2 -- never dual mine otherwise hell will break loose sooner or later. Sure you get a few more bucks for the 2nd coin.... but the RX isn't really optimized for the 2nd coin in Claymore's list. When the profitability is better, I usually get my non-RX rigs, like Nanos and 390s, to mine DCR, ZEC and others directly Rule No 3 -- always use the best card for the best coin type. While all my AMDs are ETH mining.... all my 1080tis are mining exclusively ZEC, because simply NVIDIA cards are very good for ZEC Very good info, you are right I had around 40 nanos dual mining dc all of last year and only 20 of them are still alive, on the RX cards I have only fried a few so i dual mine with the higer end 480s but you are right i can tell the cards are dying slowing due to the summer heat. My question is why do you care if they die ? I just RMA them since they are only 1 or two years old ? on 3) yeah you are right Nvidia is way better on ZEC but I have found dual mining with 1070s and 1080tis is basically close to a wash in profitablity since the 1000 series does not really use much more power dual mining compared to the RX cards ? That being said my 20 remaining nanos are stil dual mining SIA and Eth, mostly because I cant downgrade my drivers to mine ZEC , I have 20 i need to RMA though I keep putting it off. All my Nanos are on ZEC with Optiminer v1.7 Linux / smOS Optiminer has optimized it specifically for Fiji cards. Dont waste the HBM1 memory on the Nanos on ETH That memory type runs great on ZEC algo just like Pascal cards having said that -- caution for Vega HBM2 users and ETH mining you may be disappointing in the results.... This is just my mining guide nothing perfect but it keep the farm straight... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) Always have test rigs to experiment and leave the other rigs make coins RX and GTX 1070/60 cards -- always ETH R9 and GTX 1080ti cards -- always ZEC Of course you can use RX to do ZEC but it will do lower hash vs a R9-390 for example by a big margin. You can do 290 for ETH too but will use more power hence not efficient vs a RX580/480 Also using an array of 1080ti for ETH mining is impressive but not practical because its too expensive -- an RX580/480 rig can do the same job at half the price. As far as ZEC is concerned see below -- I have tested so many combinations and standardized these to the farm. 1. EWBF ZEC is best for GTX cards 2. Optiminer ZEC is best for AMD cards on Linux 3. Claymore ZEC is best for AMD rigs on Windows.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4214
Merit: 8352
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 11:45:46 AM |
|
I deleted the three posts with this info. Quoted them here this chart has wrong info and quite frankly is not a good reference point for hash rates in more then one spot. Also no links or reference for how to do the build. the second line has EBWF AND IS WRONG
YOU DO NOT EARN 2919.58 BTC PER GH!If anyone wanted to know how the new ccminer2.1 is doing on the 1080ti... here is a peak... 2 x EVGA SC2 1080ti's 65% TDP ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm5.staticflickr.com%2F4209%2F35502556350_fc56337798_b_d.jpg&t=665&c=zfztn-C90jf9mQ) this is to be deleted as it seems to be inaccurate If anyone wanted to know how the new ccminer2.1 is doing on the 1080ti... here is a peak... 2 x EVGA SC2 1080ti's 65% TDP ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm5.staticflickr.com%2F4209%2F35502556350_fc56337798_b_d.jpg&t=665&c=zfztn-C90jf9mQ) Can we get a link to build build or source? I am going to delete this as it is not accurate info as far as I can tell. If anyone wanted to know how the new ccminer2.1 is doing on the 1080ti... here is a peak... 2 x EVGA SC2 1080ti's 65% TDP ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm5.staticflickr.com%2F4209%2F35502556350_fc56337798_b_d.jpg&t=665&c=zfztn-C90jf9mQ) Can you interpret the results? Is it much better and anything? I don't really keep a record of those things onhand and it would really depend on individual cards and settings so really only you can tell us if its better or not. I am deleting this as it appears to be inaccurate
|
|
|
|
VoskCoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 01:05:00 PM |
|
best power usage for a 1070 mini? 125w? (max sol/w)
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4214
Merit: 8352
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 02:58:35 PM |
|
best power usage for a 1070 mini? 125w? (max sol/w)
I would do 105 shoot for 400-410 sols with zec +190 core -500 ram 75% fan ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FPoDGRSM.jpg&t=665&c=whCoi29_0_TZjg)
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 04:48:11 PM |
|
best power usage for a 1070 mini? 125w? (max sol/w)
I would do 105 shoot for 400-410 sols with zec +190 core -500 ram 75% fan meanwhile for ETH (to achieve 30.x MHs) +200 core +1400 mem PL 110 Zotac 1070 Minis
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
Storx
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 05:05:01 PM |
|
I deleted the three posts with this info. Quoted them here this chart has wrong info and quite frankly is not a good reference point for hash rates in more then one spot. Also no links or reference for how to do the build. the second line has EBWF AND IS WRONG
YOU DO NOT EARN 2919.58 BTC PER GH!If anyone wanted to know how the new ccminer2.1 is doing on the 1080ti... here is a peak... 2 x EVGA SC2 1080ti's 65% TDP ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm5.staticflickr.com%2F4209%2F35502556350_fc56337798_b_d.jpg&t=665&c=zfztn-C90jf9mQ) this is to be deleted as it seems to be inaccurate If anyone wanted to know how the new ccminer2.1 is doing on the 1080ti... here is a peak... 2 x EVGA SC2 1080ti's 65% TDP ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm5.staticflickr.com%2F4209%2F35502556350_fc56337798_b_d.jpg&t=665&c=zfztn-C90jf9mQ) Can we get a link to build build or source? I am going to delete this as it is not accurate info as far as I can tell. If anyone wanted to know how the new ccminer2.1 is doing on the 1080ti... here is a peak... 2 x EVGA SC2 1080ti's 65% TDP ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm5.staticflickr.com%2F4209%2F35502556350_fc56337798_b_d.jpg&t=665&c=zfztn-C90jf9mQ) Can you interpret the results? Is it much better and anything? I don't really keep a record of those things onhand and it would really depend on individual cards and settings so really only you can tell us if its better or not. I am deleting this as it appears to be inaccurate think you are mistaken on your action the math is perfect![](https://ip.bitcointalk.org/?u=https%3A%2F%2Ffarm5.staticflickr.com%2F4312%2F35061426364_c828b54df1_k_d.jpg&t=665&c=BQ1B6SfUwrvBCw)
|
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
EvilMonkey
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 07:49:31 PM |
|
Question about troubleshooting a rig powering off.
My new 4x 1080ti rig is shutting down now and then it just reboots.
It seemed related to one of my cards so I clocked that back down to defaults. All cards running at 67 TDP or near abouts. Total WATT used is 672 on a 1000W plat PSU.
I thought it might be related to them drawing too much power which is why I set the TDP down.
Doesn't seem related to that though. Was mining for 8 hours straight no issues then just reset. It was resetting within 5 mins when I had that one card clocked at +200 core. When it was in a two GPU rig it was running fine at +200, but it was not on a riser.
Any thoughts on what else might be causing it?
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4214
Merit: 8352
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 08:25:17 PM Last edit: July 13, 2017, 08:38:54 PM by philipma1957 |
|
Question about troubleshooting a rig powering off.
My new 4x 1080ti rig is shutting down now and then it just reboots.
It seemed related to one of my cards so I clocked that back down to defaults. All cards running at 67 TDP or near abouts. Total WATT used is 672 on a 1000W plat PSU.
I thought it might be related to them drawing too much power which is why I set the TDP down.
Doesn't seem related to that though. Was mining for 8 hours straight no issues then just reset. It was resetting within 5 mins when I had that one card clocked at +200 core. When it was in a two GPU rig it was running fine at +200, but it was not on a riser.
Any thoughts on what else might be causing it?
psu make and model. gpu make and model mobo make and model As for your charts Equihash 4683.88 Sol/s 0.00 Sol/s (0.00%) 0.0089 BTC/day https://new.nicehash.com/miner/16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJrI assume you did all tests your self 4683 sols = 0.0089 btc 1,000,000,000 sols = 1900 btc per gh your charts do not show methodolgy . my number above is simply made from looking at hashnest result. but If I pull it up 1x every hour I will get different numbers. In order to show correct numbers like you have in your chart. you need to run an identical rig for every coin for 7 days simultaneously . then give 7 results for each coin. day one two three four five six seven. this would be a shot at a fair sample. did you do that? if not your rigs did the tester do it. with the crazy flux patterns using a rig and testing coins 1 at a time for 30 days in a row simply is inaccurate. as you see I get 1900 btc for 1gh of zec. you get 2990 for 1 gh of hash and now nicehash reads. Equihash 3916.74 Sol/s 0.00 Sol/s (0.00%) 0.0076 BTC/day so 76/89 = .85 x 1900 = 1615 btc a gh
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 08:34:18 PM |
|
Question about troubleshooting a rig powering off.
My new 4x 1080ti rig is shutting down now and then it just reboots.
It seemed related to one of my cards so I clocked that back down to defaults. All cards running at 67 TDP or near abouts. Total WATT used is 672 on a 1000W plat PSU.
I thought it might be related to them drawing too much power which is why I set the TDP down.
Doesn't seem related to that though. Was mining for 8 hours straight no issues then just reset. It was resetting within 5 mins when I had that one card clocked at +200 core. When it was in a two GPU rig it was running fine at +200, but it was not on a riser.
Any thoughts on what else might be causing it?
psu make and model. gpu make and model mobo make and model 4 x 1080tis on a 1000w is a bit of a stretch unless you clock down the cards. Remember that Gold rated PSUs even at 1000w effectively will hit the efficiency limit at 80% or 800w so.... if you have 4 x 1080ti at 200w..... plus risers another 40w each, and mobo, CPU, RAM at 100w .... thats well off the 800w Gold level and 1000w "peak" level best practise is to have 20% buffer from your PSU rating so that PSU runs cool and not overstretched since this is a 24x7 mining intended PSU
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 08:58:39 PM |
|
So even though zpool is saying my hash rate is way down as long as my miners are doing normal hashrate the full hash is still accepted by the pool and paid accordingly? Have been seeing this off and on for a few days now on skein. Hash drops, comes back to normal, drops again. Does that for a few hours then goes to normal running again. But have not seen the dips in the 24hr earnings graph.
I've never has ANY of my miners show "reported hashrate" above zero on zpool OR ethmine - never understood how that was supposed to work, and as it doesn't affect shares earned don't really care about it.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 09:05:46 PM |
|
Question about troubleshooting a rig powering off.
My new 4x 1080ti rig is shutting down now and then it just reboots.
It seemed related to one of my cards so I clocked that back down to defaults. All cards running at 67 TDP or near abouts. Total WATT used is 672 on a 1000W plat PSU.
I thought it might be related to them drawing too much power which is why I set the TDP down.
Doesn't seem related to that though. Was mining for 8 hours straight no issues then just reset. It was resetting within 5 mins when I had that one card clocked at +200 core. When it was in a two GPU rig it was running fine at +200, but it was not on a riser.
Any thoughts on what else might be causing it?
Trying to run 4 cards with a TDP of AT LEAST 1000 watts on a 1000 watt PS is .... very iffy at best, even if you set the TDP down you're still going to see occasional spikes that are a lot higher. Also, not all "1000 watt" supplies are the same, though a plat-rated one SHOULD be at least fairly high quality.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
EvilMonkey
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 13, 2017, 09:06:46 PM |
|
Question about troubleshooting a rig powering off.
My new 4x 1080ti rig is shutting down now and then it just reboots.
It seemed related to one of my cards so I clocked that back down to defaults. All cards running at 67 TDP or near abouts. Total WATT used is 672 on a 1000W plat PSU.
I thought it might be related to them drawing too much power which is why I set the TDP down.
Doesn't seem related to that though. Was mining for 8 hours straight no issues then just reset. It was resetting within 5 mins when I had that one card clocked at +200 core. When it was in a two GPU rig it was running fine at +200, but it was not on a riser.
Any thoughts on what else might be causing it?
psu make and model. gpu make and model mobo make and model Silverstone 1000W SST-ST1000-PT Plat M/B Gigabyte P67A-UD3-B3 - Has 2x large PCI-e and 2x Mini PCI-e. Was previously running three 1080ti on it no issues but I took two of the cards off it and put 3 new ones in it that were running fine in other rigs. GPU EVGA 1080TI FE x2 EVGA 1080 FE x1 EVGA SC Black 1080 ti x1 673 WATT to the powerpoint. Question about troubleshooting a rig powering off.
My new 4x 1080ti rig is shutting down now and then it just reboots.
It seemed related to one of my cards so I clocked that back down to defaults. All cards running at 67 TDP or near abouts. Total WATT used is 672 on a 1000W plat PSU.
I thought it might be related to them drawing too much power which is why I set the TDP down.
Doesn't seem related to that though. Was mining for 8 hours straight no issues then just reset. It was resetting within 5 mins when I had that one card clocked at +200 core. When it was in a two GPU rig it was running fine at +200, but it was not on a riser.
Any thoughts on what else might be causing it?
psu make and model. gpu make and model mobo make and model 4 x 1080tis on a 1000w is a bit of a stretch unless you clock down the cards. Remember that Gold rated PSUs even at 1000w effectively will hit the efficiency limit at 80% or 800w so.... if you have 4 x 1080ti at 200w..... plus risers another 40w each, and mobo, CPU, RAM at 100w .... thats well off the 800w Gold level and 1000w "peak" level best practise is to have 20% buffer from your PSU rating so that PSU runs cool and not overstretched since this is a 24x7 mining intended PSU I said I have the cards clocked down. Who doesn't. I have them all around 67 TPD so that is pretty low. They are all at around 165W. for a total of 673 Watt back to the power point. It is a plat PSU it says its max power is above 1000W. So I have like a 300W+ buffer. THough I would like to bump the TPD up a bit if it is not the power causing the issue.
|
|
|
|
|