Fourth alt coin thread last three got oversized.

[philipma1957]

Have a little confusion with the difference in actual hashrate and zpool hashrate....a little I understand, but this is crazy. Can anyone explaint this so it makes sense?
http://imgur.com/a/vjoFk
http://imgur.com/a/XRFt7
http://imgur.com/a/tXRQj

Also not understanding the time it takes to convert to btc. Seems a lot longer than when I first started mining on zpool.
[/img] http://imgur.com/a/49W8n [/img] http://imgur.com/a/49W8n

Okay  the pool is having issues today.

here is a 2 card 1070 galax katana build with low clocks  as it is not  that accessible to me .  it does 880 to 1100
It has been steady. Noye it reads 0 miners but I am getting credit for the hash



but my in house is all wrong I should do 9900 to 11000  or 9.9 to 11.0
way too low  about 1/2

[bentcrypto]

Yes I am having issues with Z-pool Today too Phil.

Also having issues with CCminer shutting down by itself. It just completely disappears and I have to restart it again manually. This is on multiple computers, Win 10 and Win 7. I have tried running multiple instances to but it shuts them both down.

Anyone else have this issue?

[philipma1957]

Yes I am having issues with Z-pool Today too Phil.

Also having issues with CCminer shutting down by itself. It just completely disappears and I have to restart it again manually. This is on multiple computers, Win 10 and Win 7. I have tried running multiple instances to but it shuts them both down.

Anyone else have this issue?

The shutdown is  due to  over clocks

what are your settings in msi afterburner.



I have found 

70% tdp
+200 core
-200 memory
75% fan

is good but  not every cards  likes the +200 core
 I have also found intensity of 24 in bat file is more stable

[kopija]

Yes I am having issues with Z-pool Today too Phil.

Also having issues with CCminer shutting down by itself. It just completely disappears and I have to restart it again manually. This is on multiple computers, Win 10 and Win 7. I have tried running multiple instances to but it shuts them both down.

Anyone else have this issue?

Virtual memory too low?
I am at 25GB commit charge running four cards.
For ccminer reccommended is at least 30GB virtual memory.

[bentcrypto]

Thanks guys...will clock the cards down and increase pagefile and see if it fixes it. Weird thing is, it will run for days and then all of a sudden just disappears. Pretty sure I am already at 23 or 24 intensity.

[VyprBTC]

Having issues w/zpool too - my hashrates were showing like 1/2 what they were supposed to be - seems it is "fixed" now but who knows wtf.


Question I'm not sure but when I try to adjust my virtual memory I can't adjust it more that my physical memory

[philipma1957]

Having issues w/zpool too - my hashrates were showing like 1/2 what they were supposed to be - seems it is "fixed" now but who knows wtf.


Question I'm not sure but when I try to adjust my virtual memory I can't adjust it more that my physical memory

do you have a small ssd or hdd?

that could keep the memory capped.

I use 128 gb sad's so I am pretty good.

at the moment I think pool is okay.

I have ½ gear at nicehash and ½ gear at zpool

[flminer]

WOOHOO!!! Just back from having screws and plate taken outta my ankle! Hurt like hell but a very happy camper!

Sorry for the OT Phil, Just happy  

Checked zpool and the shares are clearing now so gonna shift miner back there from Nicehash and see if the hash is registering correctly now. Really like the setup there (now that a friend explained a couple things about difficulty and how it affects profitability).

Edit: Looks like it is registering hash correctly now! Good job Zpool guys... appreciate it

[flminer]

http://imgur.com/a/5B3JD

Getting closer to a 8 card nvidia build! Be my first 8 card rig. Those 2 server psu's, breakout boards and cables were delivered yesterday from Sidehack. The risers they are connected to are more Finsky (6 pin pcie for power). Now just waiting on m.2 to pcie adapters and picopsu to show up.  Happy Happy Happy (drugs kicking in)

[zer0k]

http://imgur.com/a/5B3JD

Getting closer to a 8 card nvidia build! Be my first 8 card rig. Those 2 server psu's, breakout boards and cables were delivered yesterday from Sidehack. The risers they are connected to are more Finsky (6 pin pcie for power). Now just waiting on m.2 to pcie adapters and picopsu to show up.  Happy Happy Happy (drugs kicking in)

Nice one!

Do those PSU's have connectors for the motherboard power as well?

If they do, I really need to get the dimensions to see if I can get 2 of them into a Rosewill 4U chassis to power 7 x 1080ti's

[flminer]

http://imgur.com/a/5B3JD

Getting closer to a 8 card nvidia build! Be my first 8 card rig. Those 2 server psu's, breakout boards and cables were delivered yesterday from Sidehack. The risers they are connected to are more Finsky (6 pin pcie for power). Now just waiting on m.2 to pcie adapters and picopsu to show up.   Happy Happy Happy (drugs kicking in)

Nice one!

Do those PSU's have connectors for the motherboard power as well?

If they do, I really need to get the dimensions to see if I can get 2 of them into a Rosewill 4U chassis to power 7 x 1080ti's

No, Sidehack doesn't make them. That is the picopsu's I am waiting on. If they are good quality then I will either sell them myself or work out a deal with Hawkfish. If you need any risers or fans he is your guy. And Sidehack's psu/breakout board/cable packages can't be beat for quality.

[bentcrypto]

@flminer...read my post #931 in this thread to fix your photo display problem

[flminer]

@Vosk...Are you just posting the webpage address that your pic is on ?

You need to click on your pic and then "copy image location" and paste that into IMG tags.

Code:

 [img]https://i.imgur.com/QZs1bOn.png[/img]

doing this. thanks though

@flminer...read my post #931 in this thread to fix your photo display problem

Think I just need to figure out what size to adjust to so it will be accepted. Saw Phil suggest this to someone so keep fiddling with the size till I get it.

Appreciate the info anyways.

[kopija]

I have found 

70% tdp
+200 core
-200 memory
75% fan

is good but  not every cards  likes the +200 core
 I have also found intensity of 24 in bat file is more stable

How does that 70% TDP translate to actual Watts?
Please consult nvidia-smi or Nvidia Inspector.
I am also interested in optimizing ccminer suite for best Sol/W.
Thanks.

[kemo6600]

@philipma1957

Have you been getting lots of disconnections  with skein , i am getting disconnected from pool  at least 2 times per day and miner crash immediately.

[philipma1957]

@philipma1957

Have you been getting lots of disconnections  with skein , i am getting disconnected from pool  at least 2 times per day and miner crash immediately.

what are your clocks?


intensity in bat 24

tdp of 70%
+150 core
- 100 memory
    75% fan

try this for your cards.

remember if you have an aftermarket card with a higher clock 

settings like +200 for core to + 275 may not be stable.


my aorus 1080ti  works best at

65% tdp

+ 130 core
-100 memory
70% fan

once I push core to 140 and higher I crash

[Storx]

@philipma1957

Have you been getting lots of disconnections  with skein , i am getting disconnected from pool  at least 2 times per day and miner crash immediately.

what are your clocks?


intensity in bat 24

tdp of 70%
+150 core
- 100 memory
    75% fan

try this for your cards.

remember if you have an aftermarket card with a higher clock  

settings like +200 for core to + 275 may not be stable.


my aorus 1080ti  works best at

65% tdp

+ 130 core
-100 memory
70% fan

once I push core to 140 and higher I crash

If you dont place an intensity in the batch file, what does it default to in the miner? curious because i went to an simple miner batch file because i was having a lot of crashing issues with Nemominer batch file.. now im running stable.. last 24hrs its been running at...
70%tdp
+302 core
+0 mem
Auto fan because my 2 MSI 1080ti's are watercooled...
according to HW Monitor im averaging 170-175watts each card...
981Mh/s average with latest settings per card

I have not touched mem yet, because i wanted to see what is the highest i could go on core clock first before adjusting it.. i found they froze at 310, so i went back down to 300 and been creeping it up slowly running for an hour or so between changes

One thing i did experiment with yesterday was using the FAN headers on the GPU's to run fans, because my fan controller has been giving me issues lately and someone mentioned that i may be overloading it, why not hook up some of the fans to the old fan headers on the GPU's i water blocked.. turns out in HW Monitor when i plug in 3 fans into the fan headers on the pcb and in msi afterburner adjust them to 100%, my GPU watts increases 28watts... im curious how much of that 70% fan control on your other cards is wattage being consumed via the fans...

[kemo6600]

@philipma1957

Have you been getting lots of disconnections  with skein , i am getting disconnected from pool  at least 2 times per day and miner crash immediately.

what are your clocks?


intensity in bat 24

tdp of 70%
+150 core
- 100 memory
    75% fan

try this for your cards.

remember if you have an aftermarket card with a higher clock  

settings like +200 for core to + 275 may not be stable.


my aorus 1080ti  works best at

65% tdp

+ 130 core
-100 memory
70% fan

once I push core to 140 and higher I crash

I am getting this message ,
 Stratum connection interrupted
[2017-06-06 19:20:47] Stratum connection failed: Failed to connect to yiimp.ccminer.org port 4933: Connection refused
[2017-06-06 19:20:47] ...terminating workio thread

I dont think it is clock related.
Running reference card 80% power limit , core +195 , memory -300  .. tested with core +150 and getting the same result .
unlike calymore i doesn't wait for connection problem to be fixed

Here is my bat

ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://yiimp.ccminer.org:4933 -u DLnYMDb1ZHidqKjVMEFLNZj5JPSwAxAMFP -p c=DGB
 

[Storx]

@philipma1957

Have you been getting lots of disconnections  with skein , i am getting disconnected from pool  at least 2 times per day and miner crash immediately.

what are your clocks?


intensity in bat 24

tdp of 70%
+150 core
- 100 memory
    75% fan

try this for your cards.

remember if you have an aftermarket card with a higher clock 

settings like +200 for core to + 275 may not be stable.


my aorus 1080ti  works best at

65% tdp

+ 130 core
-100 memory
70% fan

once I push core to 140 and higher I crash

I am getting this message ,
 Stratum connection interrupted
[2017-06-06 19:20:47] Stratum connection failed: Failed to connect to yiimp.ccminer.org port 4933: Connection refused

I dont think it is clock related.
Running reference card 80% power limit , core +195 , memory -300  .. tested with core +150 and getting the same result .

Here is my bat

ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://yiimp.ccminer.org:4933 -u DLnYMDb1ZHidqKjVMEFLNZj5JPSwAxAMFP -p c=DGB
 
[2017-06-06 19:20:47] ...terminating workio thread

I think that is because Yiimp has been under DDOS attacks yesterday or longer.. there was a post about it yesterday... i was going to switch to Yiimb on 1 GPU to do an equal comparison of profit, because i made 20-22% less than calculators estimate for me on ZPool... but i couldnt get the pool site to even load to get the ports yesterday when i was going to create the custom batch file

[bentcrypto]

@Vosk...Are you just posting the webpage address that your pic is on ?

You need to click on your pic and then "copy image location" and paste that into IMG tags.

Code:

 [img]https://i.imgur.com/QZs1bOn.png[/img]

doing this. thanks though

@flminer...read my post #931 in this thread to fix your photo display problem

Think I just need to figure out what size to adjust to so it will be accepted. Saw Phil suggest this to someone so keep fiddling with the size till I get it.

Appreciate the info anyways.

No problem with your photo size. see :

If you dont place an intensity in the batch file, what does it default to in the miner?

Read the text when ccminer first starts up, it will say what the intensity setting is. Default is around 27-29 which is too much for my computer.