Storx
|
|
August 23, 2017, 04:38:59 AM |
|
Ya im seriously contemplating buying a new setup for my personal gaming rig using the Threadripper platform, There is a guy on Steemit who posted up the 1920x and 1950x cpu benchmarks, he claimed with some tweaking he managed $5.37/day earnings on the 1920x and $6.83/day on the 1950x... it seemed overclocking the memory played the biggest role in earnings compared to overclocking the actual core speed... Basically $800 for the 1920x, roughly 148-150 days Basically $1000 for the 1950x, roughly 146-148 days Literally the same break even as most 1080ti's, and CPU is far easier to manage temperatures on and doesn't become obsolete nearly as fast as well should not just wear out like a GPU will.... Then there is the guy on hardware overclockers who installed 2 x Epyc 7401 on a Supermicro A+ H11DSi Motherboard, which is dual socket... giving him 48 cores and 96 threads and he is claiming cpu mining hashrates in the 3800h
|
- GPUs Mining : 128 (Updated 3/7/18) // CPUs Mining : 19 (Updated 2/23/18)
|
|
|
R0mi
Full Member
Offline
Activity: 305
Merit: 148
Theranos Coin - IoT + micro-blood arrays = Moon!
|
|
August 23, 2017, 04:41:51 AM |
|
Nice to see XMR rising towards $100! If that keeps up, may extend the useful life of my 24 470's lol.
Was actually considering changing over my 2 rigs that can't dual mine to XMR but it's been so freaking long since I mined it, I couldn't remember the sweet spot for strap-1500 modded 470s... as far as core clock/memory clock settings go.
Something like 1200/1900 rings a bell, but can't remember for sure. Anyone have any suggestions for this scenario?
XMR doesnt need much memory and I remember the ETH rigs used up to 30% less watts compared to ETH mining. Reduced power or heat are 2 good reasons alone for going to XMR -- post life after ETH and ZEC. For XFX 470s, at least, copy the 1625 strap upwards (not the 1500). Core: 1256 Mem: 1600/1650 - you don't have to go any higher to get 850/860 H/s and that's very stable.
|
Walton Chain CEO Mo' Bling: "Walton Chain will be the Qualcomm + Cisco in the blockchain industry, the ‘Google’ of the Blockchain." It's December 1999, do you know how your shitcoin holdings are doing? Magic 8 ball market analysis: www.doiownashitcoin.com
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
August 23, 2017, 10:36:21 AM |
|
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
vg54dett
|
|
August 23, 2017, 02:32:39 PM |
|
In case anybody interested, I grabbed a Vega 64 for test. (all claymore)
Eth mining 34mh stock with last AMD driver, 37mh with blockchain beta driver, and 41mh with simple OC.
less than 500h/s ZEC mining with last claymore.
Very noisy. 500euros in Germany. Won't buy more if it stay at that level.
|
|
|
|
vg54dett
|
|
August 23, 2017, 02:34:39 PM |
|
The main issue with VEGA is that I can't do anything about voltage. This is grayed in Afterburner.
I was thinking to set voltage in claymore, but I don't know the stock one. It doesn't appear in AB, and even gpu-z doesn't show it. I don't know if this is because of Beta drivers or not. If you have ideas, I can try !
|
|
|
|
Marvell1
Legendary
Offline
Activity: 2548
Merit: 1136
Leading Crypto Sports Betting & Casino Platform
|
|
August 23, 2017, 03:56:27 PM |
|
In case anybody interested, I grabbed a Vega 64 for test. (all claymore)
Eth mining 34mh stock with last AMD driver, 37mh with blockchain beta driver, and 41mh with simple OC.
less than 500h/s ZEC mining with last claymore.
Very noisy. 500euros in Germany. Won't buy more if it stay at that level.
try dual mining sia or dcr or lbr
|
..Stake.com.. | | | ▄████████████████████████████████████▄ ██ ▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄ ██ ▄████▄ ██ ▀▀▀▀▀▀▀▀▀▀ ██████████ ▀▀▀▀▀▀▀▀▀▀ ██ ██████ ██ ██████████ ██ ██ ██████████ ██ ▀██▀ ██ ██ ██ ██████ ██ ██ ██ ██ ██ ██ ██████ ██ █████ ███ ██████ ██ ████▄ ██ ██ █████ ███ ████ ████ █████ ███ ████████ ██ ████ ████ ██████████ ████ ████ ████▀ ██ ██████████ ▄▄▄▄▄▄▄▄▄▄ ██████████ ██ ██ ▀▀▀▀▀▀▀▀▀▀ ██ ▀█████████▀ ▄████████████▄ ▀█████████▀ ▄▄▄▄▄▄▄▄▄▄▄▄███ ██ ██ ███▄▄▄▄▄▄▄▄▄▄▄▄ ██████████████████████████████████████████ | | | | | | ▄▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▄ █ ▄▀▄ █▀▀█▀▄▄ █ █▀█ █ ▐ ▐▌ █ ▄██▄ █ ▌ █ █ ▄██████▄ █ ▌ ▐▌ █ ██████████ █ ▐ █ █ ▐██████████▌ █ ▐ ▐▌ █ ▀▀██████▀▀ █ ▌ █ █ ▄▄▄██▄▄▄ █ ▌▐▌ █ █▐ █ █ █▐▐▌ █ █▐█ ▀▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▀█ | | | | | | ▄▄█████████▄▄ ▄██▀▀▀▀█████▀▀▀▀██▄ ▄█▀ ▐█▌ ▀█▄ ██ ▐█▌ ██ ████▄ ▄█████▄ ▄████ ████████▄███████████▄████████ ███▀ █████████████ ▀███ ██ ███████████ ██ ▀█▄ █████████ ▄█▀ ▀█▄ ▄██▀▀▀▀▀▀▀██▄ ▄▄▄█▀ ▀███████ ███████▀ ▀█████▄ ▄█████▀ ▀▀▀███▄▄▄███▀▀▀ | | | ..PLAY NOW.. |
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
August 23, 2017, 04:20:51 PM |
|
Claymore will release a new version with lbry mining with asm, so x2 performance I guess. VEGA is a beast for dual mining I have heard. Power usage is extremely high though, it needs to be underclocked and undervolted A LOT. Have you tried with msi afterburner beta V 16 ? on msi website its only v12 i think, you have to go on guru3d to get the v 16.
|
|
|
|
vg54dett
|
|
August 23, 2017, 06:19:14 PM |
|
I tried dual mining with PASC, but result were not very high : eth dropped to 36mh (from 41) Maybe I could have better result with a lower consumption, but I don't manage to undervolt yet. I'm using AB beta 16. I think OEM driver would let me undervolt, but I'll loose many hashrate from Beta driver...
|
|
|
|
vg54dett
|
|
August 23, 2017, 06:28:23 PM |
|
About 1080Tis, what is best for Zec/Zen mining ? EWBF last version or claymore last version ? or anything else ?
|
|
|
|
rs1x
|
|
August 23, 2017, 07:06:00 PM |
|
I tried dual mining with PASC, but result were not very high : eth dropped to 36mh (from 41) Maybe I could have better result with a lower consumption, but I don't manage to undervolt yet. I'm using AB beta 16. I think OEM driver would let me undervolt, but I'll loose many hashrate from Beta driver... You might have tried this already but when dual mining you need to mess with -dcri that sometimes will help.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
August 23, 2017, 07:58:56 PM |
|
About 1080Tis, what is best for Zec/Zen mining ? EWBF last version or claymore last version ? or anything else ?
In my testing, EWBF 3.3 had a slight edge over Claymore 12.4 I've not tried 3.4 on anything yet.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
rs1x
|
|
August 24, 2017, 02:06:27 AM |
|
Phil talked about xmr a week or two ago in here ... price shoots up. Only if I would have listened
|
|
|
|
philipma1957 (OP)
Legendary
Online
Activity: 4256
Merit: 8583
'The right to privacy matters'
|
|
August 24, 2017, 02:41:42 AM |
|
Phil talked about xmr a week or two ago in here ... price shoots up. Only if I would have listened
All my mobos are mining xmr A few dollars extra each day.
|
|
|
|
LoneRangir
|
|
August 24, 2017, 02:53:32 AM |
|
About 1080Tis, what is best for Zec/Zen mining ? EWBF last version or claymore last version ? or anything else ?
In my testing, EWBF 3.3 had a slight edge over Claymore 12.4 I've not tried 3.4 on anything yet. I thought Claymore zcash miner was AMD only... What am I missing?
|
|
|
|
puwaha
|
|
August 24, 2017, 05:59:40 AM |
|
The main issue with VEGA is that I can't do anything about voltage. This is grayed in Afterburner.
You can use the wattman tool that comes with the new beta mining driver to alter Vega things that are greyed out in Afterburner. You will have to wait for an updated version of Afterburner, I suppose. I was thinking to set voltage in claymore, but I don't know the stock one. It doesn't appear in AB, and even gpu-z doesn't show it. I don't know if this is because of Beta drivers or not. If you have ideas, I can try !
HWInfo can tell you the stock voltages.
|
|
|
|
tpd09
|
|
August 24, 2017, 07:38:00 AM |
|
About 1080Tis, what is best for Zec/Zen mining ? EWBF last version or claymore last version ? or anything else ?
In my testing, EWBF 3.3 had a slight edge over Claymore 12.4 I've not tried 3.4 on anything yet. I thought Claymore zcash miner was AMD only... What am I missing? works for both AMD and Nvidia
|
|
|
|
FloppyPurpleGherkin
Jr. Member
Offline
Activity: 308
Merit: 2
|
|
August 24, 2017, 08:42:39 AM |
|
About 1080Tis, what is best for Zec/Zen mining ? EWBF last version or claymore last version ? or anything else ?
In my testing, EWBF 3.3 had a slight edge over Claymore 12.4 I've not tried 3.4 on anything yet. I thought Claymore zcash miner was AMD only... What am I missing? works for both AMD and Nvidia No it doesn't, Claymore's Zcash miner is AMD only. You need EWBF miner for nV rigs.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
August 24, 2017, 09:05:28 AM |
|
About 1080Tis, what is best for Zec/Zen mining ? EWBF last version or claymore last version ? or anything else ?
In my testing, EWBF 3.3 had a slight edge over Claymore 12.4 I've not tried 3.4 on anything yet. I thought Claymore zcash miner was AMD only... What am I missing? works for both AMD and Nvidia No it doesn't, Claymore's Zcash miner is AMD only. You need EWBF miner for nV rigs. yups - Claymore ZEC is AMD only the Claymore ETH miner is the one that supports both.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
August 24, 2017, 09:08:27 AM |
|
Phil talked about xmr a week or two ago in here ... price shoots up. Only if I would have listened
in whattomine.com this is the first time i see Monero on top spot and ETH in 4th spot - amazing and this is promising since my ETH farm will soon need to find another coin to mine after Nov 1st.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
rs1x
|
|
August 24, 2017, 09:39:54 AM |
|
Phil talked about xmr a week or two ago in here ... price shoots up. Only if I would have listened
in whattomine.com this is the first time i see Monero on top spot and ETH in 4th spot - amazing and this is promising since my ETH farm will soon need to find another coin to mine after Nov 1st. Difficulty increase ?
|
|
|
|
|