tutulfo (OP)
|
|
February 22, 2018, 09:45:18 AM |
|
What is nplusminer?
Fork of NemosMiner with a smarter profit calculations: Uses calculations based on 24hractual and currentestimate ahashpool prices to get more realistic estimate. Includes some trust index based on past 1hr currentestimate variation from 24hr. AND is NOT sensible to spikes. This shows less switching than following Current Estimate and more switching that following the 24hr Actual. Better profitability. AFAIK NemosMiner also recently has added this. I´m not sure this has better profitability than 24hr stats for pplns pools or live stats for pps pools. There is infinite forms of predict the future (live, 24, mixed 50%, mixed 40%-60, last hour, etc.) what is the best? I may be wrong, but 24h stats for low switching and live stats for high switching I think are enough modes. I prefer to work in "tangible" benefits like powerlimits feature.
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
tutulfo (OP)
|
|
February 22, 2018, 09:50:00 AM |
|
Test last wtm pool file from master branch
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
zorvalth
|
|
February 22, 2018, 09:53:22 AM |
|
Test last wtm pool file from master branch It looks the same... with coins.json . I dont think will work with manually added pool with LUX or BSD fro example...
|
|
|
|
tutulfo (OP)
|
|
February 22, 2018, 11:15:50 AM |
|
Test last wtm pool file from master branch It looks the same... with coins.json . I dont think will work with manually added pool with LUX or BSD fro example... Now is getting all active coins from http://whattomine.com/coins.json, before was 55 from main page, now are 55 from main page and 44 from coins.json.
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
twente-mining
Member
Offline
Activity: 176
Merit: 10
|
|
February 22, 2018, 12:02:20 PM |
|
the new version Claymore-Dual miner v11.0 can now to dual mine on Blake2s
Maybe something to look in to / add ..
|
▄▄▄▄▄▄▄▄▄▄▄▄
|
|
|
4ward
Member
Offline
Activity: 473
Merit: 18
|
|
February 22, 2018, 03:16:10 PM |
|
Test last wtm pool file from master branch It looks the same... with coins.json . I dont think will work with manually added pool with LUX or BSD fro example... Now is getting all active coins from http://whattomine.com/coins.json, before was 55 from main page, now are 55 from main page and 44 from coins.json. wtm limits to 80 requests per minute currently there are 109 active coins on coins page and most are already listed on main change the condition to prevent api saturation and not process same coins twice: $WTMResponse.($_).status -eq "Active" -and ` #active $WTMResponse.($_).listed -eq $false -and ` #not listed on main page $WTMResponse.($_).lagging -eq $false -and `#up to date info $WTMResponse.($_).testing -eq $false #verified formula and not a testing
|
|
|
|
zorvalth
|
|
February 22, 2018, 04:05:19 PM |
|
Test last wtm pool file from master branch It looks the same... with coins.json . I dont think will work with manually added pool with LUX or BSD fro example... Now is getting all active coins from http://whattomine.com/coins.json, before was 55 from main page, now are 55 from main page and 44 from coins.json. Can you give me a hand here, I made a custom pool ps1 for GBX/Altminer based on flypool.ps1 param( [Parameter(Mandatory = $true)] [String]$Querymode = $null , [Parameter(Mandatory = $false)] [pscustomobject]$Info )
#. .\..\Include.ps1
$Name = (Get-Item $script:MyInvocation.MyCommand.Path).BaseName $ActiveOnManualMode = $true $ActiveOnAutomaticMode = $false $ActiveOnAutomatic24hMode = $false $AbbName = 'GBXA' $WalletMode = "NONE" $Result = @() $RewardType='PPLS'
#**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** #****************************************************************************************************************************************************************************************
if ($Querymode -eq "info"){ $Result = [PSCustomObject]@{ Disclaimer = "No registration, No autoexchange" ActiveOnManualMode=$ActiveOnManualMode ActiveOnAutomaticMode=$ActiveOnAutomaticMode ActiveOnAutomatic24hMode=$ActiveOnAutomatic24hMode ApiData = $True AbbName=$AbbName WalletMode=$WalletMode RewardType=$RewardType } }
#**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** if (($Querymode -eq "core" ) -or ($Querymode -eq "Menu")){
$Pools=@() $Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="US";"server"="eu1.altminer.net"} $Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="ASIA";"server"="eu1.altminer.net"} $Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="EUROPE";"server"="eu1.altminer.net"}
$Pools | ForEach-Object {
$Flypool_Algorithm = get_algo_unified_name $_.algo $Flypool_coin = get_coin_unified_name $_.coin $Flypool_symbol = $_.Symbol
$Result+=[PSCustomObject]@{ Algorithm = $Flypool_Algorithm Info = $Flypool_coin Price = $null Price24h = $null Protocol = "stratum+tcp" Host = $_.server Port = $_.port User = $CoinsWallets.get_item($Flypool_symbol) Pass = "x" Location = $_.location SSL = $false Symbol = $Flypool_Symbol AbbName = $AbbName ActiveOnManualMode = $ActiveOnManualMode ActiveOnAutomaticMode = $ActiveOnAutomaticMode PoolWorkers = $_.Workers PoolHashRate = $null Blocks_24h = $null WalletMode = $WalletMode PoolName = $Name RewardType=$RewardType } }
}
#**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** #****************************************************************************************************************************************************************************************
$Result |ConvertTo-Json | Set-Content $info.SharedFile remove-variable Result
I added GBX address and WHATTOMINEPOOLORDER in the config, changed the @@MINWORKERS to 0. And when i start the bat file and choose manual i see my pool file nad it runs just fine. But when i choose Auto or Auto24 and select whattomine it says: "NO POOLS!....retry in 10 sec --- REMEMBER, IF YOUR ARE MINING ON ANONYMOUS WITHOUT AUTOEXCHANGE POOLS LIKE YIIMP, NANOPOOL, ETC. YOU MUST SET WALLET FOR AT LEAST ONE POOL COIN IN CONFIG.TXT"
|
|
|
|
tutulfo (OP)
|
|
February 22, 2018, 06:15:37 PM |
|
the new version Claymore-Dual miner v11.0 can now to dual mine on Blake2s
Maybe something to look in to / add ..
Use master branch code, is included on it.
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
tutulfo (OP)
|
|
February 22, 2018, 06:30:02 PM |
|
Test last wtm pool file from master branch It looks the same... with coins.json . I dont think will work with manually added pool with LUX or BSD fro example... Now is getting all active coins from http://whattomine.com/coins.json, before was 55 from main page, now are 55 from main page and 44 from coins.json. Can you give me a hand here, I made a custom pool ps1 for GBX/Altminer based on flypool.ps1 param( [Parameter(Mandatory = $true)] [String]$Querymode = $null , [Parameter(Mandatory = $false)] [pscustomobject]$Info )
#. .\..\Include.ps1
$Name = (Get-Item $script:MyInvocation.MyCommand.Path).BaseName $ActiveOnManualMode = $true $ActiveOnAutomaticMode = $false $ActiveOnAutomatic24hMode = $false $AbbName = 'GBXA' $WalletMode = "NONE" $Result = @() $RewardType='PPLS'
#**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** #****************************************************************************************************************************************************************************************
if ($Querymode -eq "info"){ $Result = [PSCustomObject]@{ Disclaimer = "No registration, No autoexchange" ActiveOnManualMode=$ActiveOnManualMode ActiveOnAutomaticMode=$ActiveOnAutomaticMode ActiveOnAutomatic24hMode=$ActiveOnAutomatic24hMode ApiData = $True AbbName=$AbbName WalletMode=$WalletMode RewardType=$RewardType } }
#**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** if (($Querymode -eq "core" ) -or ($Querymode -eq "Menu")){
$Pools=@() $Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="US";"server"="eu1.altminer.net";PoolWorkers =20} $Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="ASIA";"server"="eu1.altminer.net"} $Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="EUROPE";"server"="eu1.altminer.net"}
$Pools | ForEach-Object {
$Flypool_Algorithm = get_algo_unified_name $_.algo $Flypool_coin = get_coin_unified_name $_.coin $Flypool_symbol = $_.Symbol
$Result+=[PSCustomObject]@{ Algorithm = $Flypool_Algorithm Info = $Flypool_coin Price = $null Price24h = $null Protocol = "stratum+tcp" Host = $_.server Port = $_.port User = $CoinsWallets.get_item($Flypool_symbol) Pass = "x" Location = $_.location SSL = $false Symbol = $Flypool_Symbol AbbName = $AbbName ActiveOnManualMode = $ActiveOnManualMode ActiveOnAutomaticMode = $ActiveOnAutomaticMode PoolWorkers = $_.Workers PoolHashRate = $null Blocks_24h = $null WalletMode = $WalletMode PoolName = $Name RewardType=$RewardType } }
}
#**************************************************************************************************************************************************************************************** #**************************************************************************************************************************************************************************************** #****************************************************************************************************************************************************************************************
$Result |ConvertTo-Json | Set-Content $info.SharedFile remove-variable Result
I added GBX address and WHATTOMINEPOOLORDER in the config, changed the @@MINWORKERS to 0. And when i start the bat file and choose manual i see my pool file nad it runs just fine. But when i choose Auto or Auto24 and select whattomine it says: "NO POOLS!....retry in 10 sec --- REMEMBER, IF YOUR ARE MINING ON ANONYMOUS WITHOUT AUTOEXCHANGE POOLS LIKE YIIMP, NANOPOOL, ETC. YOU MUST SET WALLET FOR AT LEAST ONE POOL COIN IN CONFIG.TXT" Change this variables to true at start of new pool file $ActiveOnAutomaticMode = $false $ActiveOnAutomatic24hMode = $false If you dont want to change @@minworkers add this $Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="US";"server"="eu1.altminer.net"; "PoolWorkers" =20}
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
zorvalth
|
|
February 22, 2018, 07:18:42 PM |
|
Change this variables to true at start of new pool file
$ActiveOnAutomaticMode = $false $ActiveOnAutomatic24hMode = $false
If you dont want to change @@minworkers add this
$Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="US";"server"="eu1.altminer.net";"PoolWorkers" =20}
I tried to make them true a little after i posted my question but it didnt help. And there is no point of changing them to true because flypool is also false/false on auto/auto24 but if i add ZEC address and whattominepoolorder=FLYPOOL when i select Auto or Auto24 and then Whattomine it starts flypool with no problem. but i cant make it work with my custom GBXAltminer based on flypool.ps1 ...
|
|
|
|
tutulfo (OP)
|
|
February 22, 2018, 08:05:07 PM |
|
Change this variables to true at start of new pool file
$ActiveOnAutomaticMode = $false $ActiveOnAutomatic24hMode = $false
If you dont want to change @@minworkers add this
$Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="US";"server"="eu1.altminer.net";"PoolWorkers" =20}
I tried to make them true a little after i posted my question but it didnt help. And there is no point of changing them to true because flypool is also false/false on auto/auto24 but if i add ZEC address and whattominepoolorder=FLYPOOL when i select Auto or Auto24 and then Whattomine it starts flypool with no problem. but i cant make it work with my custom GBXAltminer based on flypool.ps1 ... Open an issue in github and upload your pool file, I will test it.
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
origin-AL
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 22, 2018, 09:44:10 PM |
|
Hi Tutulino,
Great progress on the script, it has come a long way!
Thanks for remembering my old suggestion to handicap the mining pools based on actual observation of overestimation, also the delay close miner feature is great!
I have a question about this feature: -Option for asociate command to launch before run to each miner (nvidia inspector for example to set overclock)
Does this mean I can provide different afterburner profiles to different algos? I would like to under volt timetravel and tribus algo because my rig sometimes crash,how would I implement this? Can you give an example of how to implement this feature please?
Best,
Alex
|
|
|
|
zorvalth
|
|
February 23, 2018, 09:26:09 AM |
|
Change this variables to true at start of new pool file
$ActiveOnAutomaticMode = $false $ActiveOnAutomatic24hMode = $false
If you dont want to change @@minworkers add this
$Pools +=[pscustomobject]@{"Symbol"="GBX"; "algo"="Neoscrypt";"port"=10000;"coin"="GBXCoin";"location"="US";"server"="eu1.altminer.net";"PoolWorkers" =20}
I tried to make them true a little after i posted my question but it didnt help. And there is no point of changing them to true because flypool is also false/false on auto/auto24 but if i add ZEC address and whattominepoolorder=FLYPOOL when i select Auto or Auto24 and then Whattomine it starts flypool with no problem. but i cant make it work with my custom GBXAltminer based on flypool.ps1 ... Open an issue in github and upload your pool file, I will test it. Did it, thanks.
|
|
|
|
tutulfo (OP)
|
|
February 23, 2018, 10:27:53 AM |
|
Hi Tutulino,
Great progress on the script, it has come a long way!
Thanks for remembering my old suggestion to handicap the mining pools based on actual observation of overestimation, also the delay close miner feature is great!
I have a question about this feature: -Option for asociate command to launch before run to each miner (nvidia inspector for example to set overclock)
Does this mean I can provide different afterburner profiles to different algos? I would like to under volt timetravel and tribus algo because my rig sometimes crash,how would I implement this? Can you give an example of how to implement this feature please?
Best,
Alex
Prelaunch command is at miner level (I expect change to algo level at future), for what you want you must make a copy of miner with that algos and let it alone with that two algos, let old miner without them. Example:NowccminerXXXX: algos: tribus, timetravel, algoX, algoY, algoZ, etc. prelaunchcommand:"" Your desireccminerXXXX: algos: algoX, algoY, algoZ, etc. prelaunchcommand:"" ccminerXXXX_v2: algos: tribus, timetravel prelaunchcommand:"WHAT YOU WANT LAUNCH BEFORE"
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
origin-AL
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 23, 2018, 05:53:47 PM |
|
Prelaunch command is at miner level (I expect change to algo level at future), for what you want you must make a copy of miner with that algos and let it alone with that two algos, let old miner without them.
Example:
Now
ccminerXXXX: algos: tribus, timetravel, algoX, algoY, algoZ, etc. prelaunchcommand:""
Your desire
ccminerXXXX: algos: algoX, algoY, algoZ, etc. prelaunchcommand:""
ccminerXXXX_v2: algos: tribus, timetravel prelaunchcommand:"WHAT YOU WANT LAUNCH BEFORE"
Thanks for getting back to me. I now understand how to split up the miner into 2 copies with different algo in each, and I see where you would add he prelaunch command. I dont understand what I would put between the quotes of the prelaunch command. For example if I want to launch msi afterburner on preset 3 what would I write? I have never done something like this before, sorry.
|
|
|
|
tutulfo (OP)
|
|
February 23, 2018, 08:22:17 PM |
|
Prelaunch command is at miner level (I expect change to algo level at future), for what you want you must make a copy of miner with that algos and let it alone with that two algos, let old miner without them.
Example:
Now
ccminerXXXX: algos: tribus, timetravel, algoX, algoY, algoZ, etc. prelaunchcommand:""
Your desire
ccminerXXXX: algos: algoX, algoY, algoZ, etc. prelaunchcommand:""
ccminerXXXX_v2: algos: tribus, timetravel prelaunchcommand:"WHAT YOU WANT LAUNCH BEFORE"
Thanks for getting back to me. I now understand how to split up the miner into 2 copies with different algo in each, and I see where you would add he prelaunch command. I dont understand what I would put between the quotes of the prelaunch command. For example if I want to launch msi afterburner on preset 3 what would I write? I have never done something like this before, sorry. I never used afterburner via command line but I supose must be something like that c:\program files\afterburner\afterburner.exe -p 3 Look for afterburner command line help to see how invoke
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
origin-AL
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 23, 2018, 09:03:45 PM |
|
I never used afterburner via command line but I supose must be something like that
c:\program files\afterburner\afterburner.exe -p 3
Look for afterburner command line help to see how invoke
Great thanks! If i have a prelaunch command for only one miner, will it return to the previous 'normal' profile when the miner closes? Or does it become necessary to set the 'normal' profile for every other miner?
|
|
|
|
tutulfo (OP)
|
|
February 24, 2018, 09:07:34 PM |
|
I never used afterburner via command line but I supose must be something like that
c:\program files\afterburner\afterburner.exe -p 3
Look for afterburner command line help to see how invoke
Great thanks! If i have a prelaunch command for only one miner, will it return to the previous 'normal' profile when the miner closes? Or does it become necessary to set the 'normal' profile for every other miner? Yes you need add "normal profile" to other miners
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
tutulfo (OP)
|
|
February 24, 2018, 09:08:49 PM |
|
6.0 release
--FEATURES CHANGES:
*Added minable algorithms selection in config.txt *Faster boot and interval change *Added Efficency in Local currency per Watt *Added option in config.txt for specific pool payment currency *Changed btc revenue to mbtc *Faster interval change
---POOLS CHANGES: *Added blazepool pool *Added ravencoin pool to suprnova *Adapted zergpool to new api address *Added all non main page active coins to Whattomine pool
---MINERS CHANGES: *Added ccminer for x16r algo *Added Palgin HSR Neoscrypt fork by Just-a-miner. *Updated claymore to 11 (added pascal, keccak and blake2s for dualmining) *Claymore dual for AMD moved to miners folder due to high profit *Updated excavator to 1.4.4a *Updated cpu miner to 3.8.2.1 *Added Claymore Neoscrypt miner 1.0 *Updated dtsm to 0.6
---BUG FIXES:
*Fixed: Whattomine pool order variable not in config.txt *Fixed: Not supported message error for old NVIDIA cards *Fixed: Best miners filter in profits screen not returning to initial state *Fixed: Watchdog lower sensitivity *Fixed: OverdriveN.exe requires Visual Studio debug dlls *Fixed: writelog prompt msg when corrupted stats file *Fixed: distinct gpu groups order between active miners and profits zones *Fixed: mining pool hub excavator error (now mining pool hub uses IP address ) *Fixed: dual mining info in profits screen and active miners section (revenue and pool) *Fixed: Active miners profit not including pool profit factor, pool fee and miner fee *Fixed: AMD cards not showing in current screen *Fixed: pool speed not reported in active miners section *Fixed: dollar symbol showed as "36" *Fixed: Wrong Stats screen running time *Fixed: op_addiction error *Fixed: download files errors *Fixed: ADL error message in log file
--RELEASE NOTES This release changes next config variables: @@ALGORITHMS_NVIDIA,@@ALGORITHMS_AMD,@@ALGORITHMS_CPU
|
Megaminer - Multi pool / Multi Algo launcher https://bitcointalk.org/index.php?topic=2059039.0BTC: 1AVMHnFgc6SW33cwqrDyy2Fug9CsS8u6TM ------- LTC: LVwuYbAvbMDVapheQBA7o2qQ2mKTEXVDbX BCH: 1N7wsg4JmWJLP6BuHUP5rwsAXnQjTWPBjr -------- ETH: 0x9b7A01Bf5bD29c66d228d372B5bD1C43cDb78AcC
|
|
|
origin-AL
Newbie
Offline
Activity: 19
Merit: 0
|
|
February 25, 2018, 02:02:15 AM |
|
I never used afterburner via command line but I supose must be something like that
c:\program files\afterburner\afterburner.exe -p 3
Look for afterburner command line help to see how invoke
Couldn't get it to work, I found this regarding what the command line should be -https://bitcointalk.org/index.php?topic=2105295.0 Whenever I put anything in the PrelaunchCommand it tells me 'Bad formed json' Here is what I tried: "PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe -profile3" "PrelaunchCommand":""C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -profile3" "PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -profile3
|
|
|
|
|