Megaminer 6.3 - Multi pool / Multi Algo launcher

[jbonifacio]

6.0 release

--FEATURES CHANGES:

*Added minable algorithms selection in config.txt

Something is broken. Just tried running this latest update on a test rig which has been running perfectly on the prior beta release. I keep getting blue-screen crashes while benchmarking N-PanginNeoJust. So I disabled it and now on the profit screen everything is doubled even though I have just one group defined. There also lots of error messages that I've never seen before. I also see two miners being launched as well. Going to review to the prior beta release for now.

Code:

                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
    + FullyQualifiedErrorId : PropertyAssignmentException

The property 'PowerLimits' cannot be found on this object. Verify that the property exists and can be set.
At E:\coin\Megaminer-6.0\Include.ps1:518 char:41
+ ...                         $_.PowerLimits = $Pl |Sort-Object -Descending
+                             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
    + FullyQualifiedErrorId : PropertyAssignmentException

Exception calling "Add" with "2" argument(s): "Item has already been added. Key in dictionary: 'BTC'  Key being added: 'BTC'"
At E:\coin\Megaminer-6.0\core.ps1:285 char:144
+ ... ach-Object {$CoinsWallets.add(($_ -split "=")[0],($_ -split "=")[1])} ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ArgumentException

Exception calling "Add" with "2" argument(s): "Item has already been added. Key in dictionary: 'DNR'  Key being added: 'DNR'"
At E:\coin\Megaminer-6.0\core.ps1:285 char:144
+ ... ach-Object {$CoinsWallets.add(($_ -split "=")[0],($_ -split "=")[1])} ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ArgumentException

Exception calling "Add" with "2" argument(s): "Item has already been added. Key in dictionary: 'XVG'  Key being added: 'XVG'"
At E:\coin\Megaminer-6.0\core.ps1:285 char:144
+ ... ach-Object {$CoinsWallets.add(($_ -split "=")[0],($_ -split "=")[1])} ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ArgumentException

Loading Pools Information.............

Code:

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  (E)nd Interval   (P)rofits    (C)urrent    (H)istory    (W)allets    (S)tats                                                                            |  Next Interval:  595 secs...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

GroupName MMPowLmt LocalSpeed mbtc/Day Rev./Day Profit/Day Algorithm   Coin        Miner         Power Efficiency Efficiency PoolSpeed Workers Loc. Pool
--------- -------- ---------- -------- -------- ---------- ---------   ----        -----         ----- ---------- ---------- --------- ------- ---- ----
1060            60   0.0 ph/s  0.00000    0.00$      0.00$ CRYPTONIGHT cryptonight N-Excavator     76W   0.0 ph/W 0.0000 $/W  0.0 ph/s         US   NH
1060            60   0.0 ph/s  0.00000    0.00$      0.00$ ETHASH      ethereum    N-ClaymoreETH   76W   0.0 ph/W 0.0000 $/W  0.0 ph/s         US   NH


-------------------------------------------------------------------------------------  PROFITS  -----------------------------------------------------------------------------------------
                                                                                                                                                    (B)est Miners/All       (T)op 12/All


   GroupName: 1060

Algorithm   Coin        Miner              PowLmt StatsSpeed     PowerAvg Efficiency mbtc/Day Rev./Day   Profit/Day PoolFee MinerFee Loc. Pool
---------   ----        -----              ------ ----------     -------- ---------- -------- --------   ---------- ------- -------- ---- ----
CRYPTONIGHT cryptonight N-Excavator            60   0.0 ph/s Benchmarking   NaN ph/W  0.00000    0.00$ Benchmarking   4.00%    0.00% US   NH
ETHASH      ethereum    N-ClaymoreETH          60  38.1 mh/s          140 272.4 kh/W  0.25463    2.48$        2.48$   4.00%    1.00% US   NH
ETHASH      ethereum    N-ClaymoreETH          60  38.1 mh/s          140 272.4 kh/W  0.25463    2.48$        2.48$   4.00%    1.00% US   NH
EQUIHASH    equihash    N-Bminer               60  533.8 h/s          143    3.7 h/W  0.24096    2.35$        2.35$   4.00%    2.00% US   NH
EQUIHASH    equihash    N-Bminer               60  533.8 h/s          143    3.7 h/W  0.24096    2.35$        2.35$   4.00%    2.00% US   NH
NEOSCRYPT   neoscrypt   N-CcminerKlaust        60   1.0 mh/s          137   7.5 kh/W  0.18370    1.79$        1.79$   4.00%          US   NH
NEOSCRYPT   neoscrypt   N-CcminerKlaust        60   1.0 mh/s          137   7.5 kh/W  0.18370    1.79$        1.79$   4.00%          US   NH
NIST5       nist5       N-Excavator            60  49.3 mh/s          141 350.8 kh/W  0.16793    1.63$        1.63$   4.00%    0.00% US   NH
NIST5       nist5       N-Excavator            60  49.3 mh/s          141 350.8 kh/W  0.16793    1.63$        1.63$   4.00%    0.00% US   NH
LYRA2V2     lyra2v2     N-CcminerPolytmos      60  42.5 mh/s          134 317.2 kh/W  0.16438    1.60$        1.60$   4.00%          US   NH
LYRA2V2     lyra2v2     N-CcminerPolytmos      60  42.5 mh/s          134 317.2 kh/W  0.16438    1.60$        1.60$   4.00%          US   NH
SKUNK       skunk       N-CcminerTpruvot       60  29.5 mh/s          129 228.8 kh/W  0.15673    1.53$        1.53$   4.00%    0.00% US   NH
SKUNK       skunk       N-CcminerTpruvot       60  29.5 mh/s          129 228.8 kh/W  0.15673    1.53$        1.53$   4.00%    0.00% US   NH
KECCAK      keccak      N-Excavator            60 836.6 mh/s          143   5.8 mh/W  0.14170    1.38$        1.38$   4.00%    0.00% US   NH
KECCAK      keccak      N-Excavator            60 836.6 mh/s          143   5.8 mh/W  0.14170    1.38$        1.38$   4.00%    0.00% US   NH
X11GOST     x11gost     N-ccminerPalgin        60  13.2 mh/s          132  99.6 kh/W  0.07217    0.70$        0.70$   4.00%          US   NH
X11GOST     x11gost     N-ccminerPalgin        60  13.2 mh/s          132  99.6 kh/W  0.07217    0.70$        0.70$   4.00%          US   NH
PASCAL      pascal      N-Excavator            60   1.1 gh/s          144   7.9 mh/W  0.06830    0.66$        0.66$   4.00%    0.00% US   NH
PASCAL      pascal      N-Excavator            60   1.1 gh/s          144   7.9 mh/W  0.06830    0.66$        0.66$   4.00%    0.00% US   NH
LBRY        lbry        N-ccminerAlexisHSR     60 303.3 mh/s          142   2.1 mh/W  0.01430    0.14$        0.14$   4.00%    0.00% US   NH
LBRY        lbry        N-ccminerAlexisHSR     60 303.3 mh/s          142   2.1 mh/W  0.01430    0.14$        0.14$   4.00%    0.00% US   NH
BLAKE2S     blake2s     N-CcminerPolytmos      60   4.2 gh/s          143  29.3 mh/W  0.00000    0.00$        0.00$   4.00%          US   NH
BLAKE2S     blake2s     N-CcminerPolytmos      60   4.2 gh/s          143  29.3 mh/W  0.00000    0.00$        0.00$   4.00%          US   NH
BLAKE2S     blake2s     N-ccminerAlexisHSR     60   4.2 gh/s          143  29.3 mh/W  0.00000    0.00$        0.00$   4.00%    0.00% US   NH

Code:

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************                           BASIC OPTIONS                          ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************

-- Your rig ID

@@WORKERNAME=BENCH

--Autoexchange pools preferred currencies.
--You can set a generic currency for all autoexchange pools @@CURRENCY=XXX or a specific currency for one pool @@CURRENCY_NAMEOFPOOL=BTC valid only for that pool
--pools without autoexchange (yiimp, suprnova...) need a wallet of same coin you are mining
--You must be sure selected pool support pay that coin or you can lose your money.
--You must set wallet for this currencies on "Wallets Section"

@@CURRENCY=XVG
@@CURRENCY_NAMEOFPOOL=XXX

-- Local currency shown within the profits screen (DOLLAR, EURO, GBP)

@@LOCALCURRENCY=DOLLAR

-- Location of your rig: EUROPE/US/ASIA (by default "US" will be used for pools that don't require or support this setting)

@@LOCATION=US

-- Pool user name for non-anonymous pools such as SprNova, BlocksFactory, or MiningPoolHub
-- You can ignore this setting if you're not using these types of pools

@@USERNAME=bachsolo

-- For auto exchange pools. You only need set a wallet for your preferred currencies (@@currency).
-- Other pools without an auto exchange, like Yiimp, will need a wallet defined for the same coin you are mining.
-- You can add wallets using pattern  @@WALLET_XXX=YYYYY (where XXX=currency symbol; YYYYY=your wallet).
-- For Nicehash if a @@WALLET_BTC_NICE=XXXXXXX is found it will be used, if not @@WALLET_BTC will be used.
-- For some coins, such as Electroneum, you will need a Payment ID. Add it after your address separated by a dot.

@@WALLET_BTC=1Pmi186CrnDtmDmjsjV9Bycbev9JqXiiKt
--@@WALLET_BTC=12PjPV5FBnyGrYR75sKTeQTU1dPoh6Wb12
--@@WALLET_BTC=15nV26qRSiNf42fjUwHtaFR7cT4umqWSQi
@@WALLET_DNR=DP9HCR1JT2f7hKHbhUZeNoFC2hBofHNyPN
@@WALLET_RDD-RdFqnaQ1vBxgoyoAe6ECbdY3GvapuvVCvq
@@WALLET_XVG=DRA3baBnoLeEpDa3RP2MwZ9BzMpnaFemiK

-- Number of minutes to mine as a donation each day (minimum 5 minutes or 0.34%)

@@DONATE=10

-- Use your cpu to mine: ENABLED = yes, DISABLED = no (you can start cpu alone mining also using -groupnames parameter in batch file)

@@CPUMINING=DISABLED

--Electricity cost, you can use this converter to get your BTC cost http://www.xe.com/es/currencyconverter/convert/?Amount=0%2C012&From=EUR&To=XBT
--Example for all day cost [{"HourStart":0,"HourEnd":23,"CostKwh":0.105609}]
--Example for two periods cost [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]

@@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.0000986078}]

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************   ADVANCED OPTIONS (don't change unless you know what you do)    ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************



-- Profit recheck interval time (in seconds) for each kind of pool
-- This interval recalculates and selects the most profitable algorithm 

@@INTERVAL_PPS=300
@@INTERVAL_PPLS=1800

-- Benchmarks interval time (less than 300 not recommended for GPU due to miners ramp time), if you want to use automatic gpu power limit configuration is recommended at least 600

@@BENCHMARKTIME=600

- When enabled miners stats are updated while real mining, if disabled miner stats only are updated while benchmarking (ENABLED/DISABLED)

@@LIVESTATSUPDATE=ENABLED

-- Screen to be shown at script start-up (WALLETS/CURRENT/HISTORY/PROFITS/STATS)

@@STARTSCREEN=PROFITS


-- Percent to switch miner/algo, new miner/algo only will be launched if new profit is greater than actual profit in specified percent (example: 10 means that new miner/algo must be 10% more profitable than actual to be launched)

@@PERCENTTOSWITCH=10


-- [OPTIONAL] API Keys
-- Some non-anonymous pools, such as Suprnova and MPH, require API keys to obtain wallet details or pool speed.
-- For example @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4
-- FORMAT: @@APIKEY_NAMEOFPOOL=XXXXXXXXXX) [optional] 


-- @@APIKEY_NAMEOFPOOL=XXXXXXXXXX
-- @@APIKEY_NAMEOFPOOL2=YYYYYYYYYY


-- [OPTIONAL] GPU Groups/PowerLimits
-- if you don´t set groups MM automatically makes 2 groups, one for all NVIDIA gpus and other for all AMD gpus
-- If you activate this option miners ports will be calculated dynamic mode, some software like ethmonitoring will not work due to miner dynamic port assignation
-- You can group your cards as you want. It's recommended to create a group for each card model in your rig, each group will be benchmarked and run separately (you can identify your GPU id's by launching GpuList.bat)
-- Type must be NVIDIA or AMD, 
-- You can set Powerlimits (MM must run in administrator mode and UAC disabled or prompt appears) for each NVIDIA group, MM will benchmark all miners with maximum value, done this, when a miner is maximum profit candidate MM will benchmark other power limits of that miner to find best. (zero means MM will not change Power Limit) 
-- Example1: @@GPUGROUPS=[{"GroupName" : "Card1","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card2","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card3","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"}]
-- Example2: @@GPUGROUPS=[{"GroupName" : "1080","Type":"NVIDIA","Gpus":"0,1,2,3,4","PowerLimits":"100,90,80"} , {"GroupName" : "RX580","Type":"AMD","Gpus":"0,1","PowerLimits":"0"} ]


@@GPUGROUPS=[{"GroupName":"1060","Type":"NVIDIA","Gpus":"0,1","PowerLimits":"60"}]


--[OPTIONAL]  Pools profit correction factors
--Usually pools revenue is overestimated, this factor allows manual correction (Profit= ReportedPoolProfit * @@POOLPROFITFACTOR)
--This values are based on experience


@@POOLPROFITFACTOR_AHASHPOOL=0.7
@@POOLPROFITFACTOR_NICEHASH=1
@@POOLPROFITFACTOR_MININGPOOLHUB=0.8
@@POOLPROFITFACTOR_ZPOOL=0.7
@@POOLPROFITFACTOR_ZERGPOOL=0.5


--Enabled or disable detailed log

@@DEBUGLOG=DISABLED


--Delayed miners closing, while new miner is starting, old one continue mining for specified seconds

@@DELAYCLOSEMINERS=0
 
 
--Min number of workers in a pool to be considered as "good"

@@MINWORKERS=20

-- This variable defines order for Whattomine based stats virtual pool, for each coin MM find in WTM it will search what real pool has this coin available, first found (in specified order) is selected.
-- Only this pools are compatible (they works at coin level): Yiimp, Suprnova, MiningPoolHub, ZergPool 
-- WTM profit is based on instant coin change rate, is recommended use pools with autoexchange on like MiningPoolHub and ZergPool


@@WHATTOMINEPOOLORDER=MiningPoolHub,ZergPool


--Algorithms, define what algorithms can be mined for MM, for an Algo can be mined must exists: 1. A pool, 2. A miner, 3. This config.
--If used, algorithm parameter from core.ps1 override this config.

@@ALGORITHMS_NVIDIA=bitcore,blake2s,blakecoin,c11,cryptonight,Equihash,Ethash,,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,groestl,hsr,jha,Keccak,keccakc,lbry,lyra2v2,lyra2z,Myriad-Groestl,Neoscrypt,nist5,pascal,phi,polytimos,sib,skein,skunk,timetravel,tribus,veltor,whirpool,x11evo,x11gost,x14,x16r,x17,xevan
@@ALGORITHMS_AMD=bitcore,blake,blake2s,cryptonight,darkcoin-mod,equihash,Ethash,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,Groestl,hsr,Keccak,lyra2v2,lyra2z,Myriad-groestl,neoscrypt,Pascal,phi,skein,tribus,vanilla,veltor,x11gost,xevan
@@ALGORITHMS_CPU=bitcore,blakecoin,cryptonight,hmq1725,jha,keccak,keccakc,lyra2v2,lyra2z,m7m,neoscrypt,nist5,phi,polytimos,timetravel,tribus,veltor

 


-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************                           BASIC OPTIONS                          ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************

-- Your rig ID

@@WORKERNAME=BENCH

--Autoexchange pools preferred currencies.
--You can set a generic currency for all autoexchange pools @@CURRENCY=XXX or a specific currency for one pool @@CURRENCY_NAMEOFPOOL=BTC valid only for that pool
--pools without autoexchange (yiimp, suprnova...) need a wallet of same coin you are mining
--You must be sure selected pool support pay that coin or you can lose your money.
--You must set wallet for this currencies on "Wallets Section"

@@CURRENCY=XVG
@@CURRENCY_NAMEOFPOOL=XXX


-- Local currency shown within the profits screen (DOLLAR, EURO, GBP)

@@LOCALCURRENCY=DOLLAR

-- Location of your rig: EUROPE/US/ASIA (by default "US" will be used for pools that don't require or support this setting)

@@LOCATION=US

-- Pool user name for non-anonymous pools such as SprNova, BlocksFactory, or MiningPoolHub
-- You can ignore this setting if you're not using these types of pools

@@USERNAME=abc123

-- For auto exchange pools. You only need set a wallet for your preferred currencies (@@currency).
-- Other pools without an auto exchange, like Yiimp, will need a wallet defined for the same coin you are mining.
-- You can add wallets using pattern  @@WALLET_XXX=YYYYY (where XXX=currency symbol; YYYYY=your wallet).
-- For Nicehash if a @@WALLET_BTC_NICE=XXXXXXX is found it will be used, if not @@WALLET_BTC will be used.
-- For some coins, such as Electroneum, you will need a Payment ID. Add it after your address separated by a dot.

@@WALLET_BTC=1mi186CrnDtmDmj.....
--@@WALLET_BTC=1PjPV5FBnyGrY.....
--@@WALLET_BTC=1nV26qRSi.....
@@WALLET_DNR=DP9HR1JT2f7hKHhU.....
@@WALLET_RDD-RdFqnaQ1vBxgoy.....
@@WALLET_XVG=DRA3aBnoLeEpDa.....

-- Number of minutes to mine as a donation each day (minimum 5 minutes or 0.34%)

@@DONATE=10

-- Use your cpu to mine: ENABLED = yes, DISABLED = no (you can start cpu alone mining also using -groupnames parameter in batch file)

@@CPUMINING=DISABLED

--Electricity cost, you can use this converter to get your BTC cost http://www.xe.com/es/currencyconverter/convert/?Amount=0%2C012&From=EUR&To=XBT
--Example for all day cost [{"HourStart":0,"HourEnd":23,"CostKwh":0.105609}]
--Example for two periods cost [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]

@@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.0000986078}]

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************   ADVANCED OPTIONS (don't change unless you know what you do)    ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************



-- Profit recheck interval time (in seconds) for each kind of pool
-- This interval recalculates and selects the most profitable algorithm 

@@INTERVAL_PPS=300
@@INTERVAL_PPLS=1800

-- Benchmarks interval time (less than 300 not recommended for GPU due to miners ramp time), if you want to use automatic gpu power limit configuration is recommended at least 600

@@BENCHMARKTIME=600

- When enabled miners stats are updated while real mining, if disabled miner stats only are updated while benchmarking (ENABLED/DISABLED)

@@LIVESTATSUPDATE=ENABLED

-- Screen to be shown at script start-up (WALLETS/CURRENT/HISTORY/PROFITS/STATS)

@@STARTSCREEN=PROFITS


-- Percent to switch miner/algo, new miner/algo only will be launched if new profit is greater than actual profit in specified percent (example: 10 means that new miner/algo must be 10% more profitable than actual to be launched)

@@PERCENTTOSWITCH=10


-- [OPTIONAL] API Keys
-- Some non-anonymous pools, such as Suprnova and MPH, require API keys to obtain wallet details or pool speed.
-- For example @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4
-- FORMAT: @@APIKEY_NAMEOFPOOL=XXXXXXXXXX) [optional] 


-- @@APIKEY_NAMEOFPOOL=XXXXXXXXXX
-- @@APIKEY_NAMEOFPOOL2=YYYYYYYYYY


-- [OPTIONAL] GPU Groups/PowerLimits
-- if you don´t set groups MM automatically makes 2 groups, one for all NVIDIA gpus and other for all AMD gpus
-- If you activate this option miners ports will be calculated dynamic mode, some software like ethmonitoring will not work due to miner dynamic port assignation
-- You can group your cards as you want. It's recommended to create a group for each card model in your rig, each group will be benchmarked and run separately (you can identify your GPU id's by launching GpuList.bat)
-- Type must be NVIDIA or AMD, 
-- You can set Powerlimits (MM must run in administrator mode and UAC disabled or prompt appears) for each NVIDIA group, MM will benchmark all miners with maximum value, done this, when a miner is maximum profit candidate MM will benchmark other power limits of that miner to find best. (zero means MM will not change Power Limit) 
-- Example1: @@GPUGROUPS=[{"GroupName" : "Card1","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card2","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card3","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"}]
-- Example2: @@GPUGROUPS=[{"GroupName" : "1080","Type":"NVIDIA","Gpus":"0,1,2,3,4","PowerLimits":"100,90,80"} , {"GroupName" : "RX580","Type":"AMD","Gpus":"0,1","PowerLimits":"0"} ]


@@GPUGROUPS=[{"GroupName":"1060","Type":"NVIDIA","Gpus":"0,1","PowerLimits":"60"}]


--[OPTIONAL]  Pools profit correction factors
--Usually pools revenue is overestimated, this factor allows manual correction (Profit= ReportedPoolProfit * @@POOLPROFITFACTOR)
--This values are based on experience


@@POOLPROFITFACTOR_AHASHPOOL=0.7
@@POOLPROFITFACTOR_NICEHASH=1
@@POOLPROFITFACTOR_MININGPOOLHUB=0.8
@@POOLPROFITFACTOR_ZPOOL=0.7
@@POOLPROFITFACTOR_ZERGPOOL=0.5


--Enabled or disable detailed log

@@DEBUGLOG=DISABLED


--Delayed miners closing, while new miner is starting, old one continue mining for specified seconds

@@DELAYCLOSEMINERS=0
 
 
--Min number of workers in a pool to be considered as "good"

@@MINWORKERS=20

-- This variable defines order for Whattomine based stats virtual pool, for each coin MM find in WTM it will search what real pool has this coin available, first found (in specified order) is selected.
-- Only this pools are compatible (they works at coin level): Yiimp, Suprnova, MiningPoolHub, ZergPool 
-- WTM profit is based on instant coin change rate, is recommended use pools with autoexchange on like MiningPoolHub and ZergPool


@@WHATTOMINEPOOLORDER=MiningPoolHub,ZergPool


--Algorithms, define what algorithms can be mined for MM, for an Algo can be mined must exists: 1. A pool, 2. A miner, 3. This config.
--If used, algorithm parameter from core.ps1 override this config.

@@ALGORITHMS_NVIDIA=bitcore,blake2s,blakecoin,c11,cryptonight,Equihash,Ethash,,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,groestl,hsr,jha,Keccak,keccakc,lbry,lyra2v2,lyra2z,Myriad-Groestl,Neoscrypt,nist5,pascal,phi,polytimos,sib,skein,skunk,timetravel,tribus,veltor,whirpool,x11evo,x11gost,x14,x16r,x17,xevan
@@ALGORITHMS_AMD=bitcore,blake,blake2s,cryptonight,darkcoin-mod,equihash,Ethash,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,Groestl,hsr,Keccak,lyra2v2,lyra2z,Myriad-groestl,neoscrypt,Pascal,phi,skein,tribus,vanilla,veltor,x11gost,xevan
@@ALGORITHMS_CPU=bitcore,blakecoin,cryptonight,hmq1725,jha,keccak,keccakc,lyra2v2,lyra2z,m7m,neoscrypt,nist5,phi,polytimos,timetravel,tribus,veltor

[tutulfo]

6.0 release

--FEATURES CHANGES:

*Added minable algorithms selection in config.txt

Something is broken. Just tried running this latest update on a test rig which has been running perfectly on the prior beta release. I keep getting blue-screen crashes while benchmarking N-PanginNeoJust. So I disabled it and now on the profit screen everything is doubled even though I have just one group defined. There also lots of error messages that I've never seen before. I also see two miners being launched as well. Going to review to the prior beta release for now.

Code:

                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
    + FullyQualifiedErrorId : PropertyAssignmentException

The property 'PowerLimits' cannot be found on this object. Verify that the property exists and can be set.
At E:\coin\Megaminer-6.0\Include.ps1:518 char:41
+ ...                         $_.PowerLimits = $Pl |Sort-Object -Descending
+                             ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (:) [], RuntimeException
    + FullyQualifiedErrorId : PropertyAssignmentException

Exception calling "Add" with "2" argument(s): "Item has already been added. Key in dictionary: 'BTC'  Key being added: 'BTC'"
At E:\coin\Megaminer-6.0\core.ps1:285 char:144
+ ... ach-Object {$CoinsWallets.add(($_ -split "=")[0],($_ -split "=")[1])} ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ArgumentException

Exception calling "Add" with "2" argument(s): "Item has already been added. Key in dictionary: 'DNR'  Key being added: 'DNR'"
At E:\coin\Megaminer-6.0\core.ps1:285 char:144
+ ... ach-Object {$CoinsWallets.add(($_ -split "=")[0],($_ -split "=")[1])} ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ArgumentException

Exception calling "Add" with "2" argument(s): "Item has already been added. Key in dictionary: 'XVG'  Key being added: 'XVG'"
At E:\coin\Megaminer-6.0\core.ps1:285 char:144
+ ... ach-Object {$CoinsWallets.add(($_ -split "=")[0],($_ -split "=")[1])} ...
+                 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
    + FullyQualifiedErrorId : ArgumentException

Loading Pools Information.............

Code:

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  (E)nd Interval   (P)rofits    (C)urrent    (H)istory    (W)allets    (S)tats                                                                            |  Next Interval:  595 secs...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

GroupName MMPowLmt LocalSpeed mbtc/Day Rev./Day Profit/Day Algorithm   Coin        Miner         Power Efficiency Efficiency PoolSpeed Workers Loc. Pool
--------- -------- ---------- -------- -------- ---------- ---------   ----        -----         ----- ---------- ---------- --------- ------- ---- ----
1060            60   0.0 ph/s  0.00000    0.00$      0.00$ CRYPTONIGHT cryptonight N-Excavator     76W   0.0 ph/W 0.0000 $/W  0.0 ph/s         US   NH
1060            60   0.0 ph/s  0.00000    0.00$      0.00$ ETHASH      ethereum    N-ClaymoreETH   76W   0.0 ph/W 0.0000 $/W  0.0 ph/s         US   NH


-------------------------------------------------------------------------------------  PROFITS  -----------------------------------------------------------------------------------------
                                                                                                                                                    (B)est Miners/All       (T)op 12/All


   GroupName: 1060

Algorithm   Coin        Miner              PowLmt StatsSpeed     PowerAvg Efficiency mbtc/Day Rev./Day   Profit/Day PoolFee MinerFee Loc. Pool
---------   ----        -----              ------ ----------     -------- ---------- -------- --------   ---------- ------- -------- ---- ----
CRYPTONIGHT cryptonight N-Excavator            60   0.0 ph/s Benchmarking   NaN ph/W  0.00000    0.00$ Benchmarking   4.00%    0.00% US   NH
ETHASH      ethereum    N-ClaymoreETH          60  38.1 mh/s          140 272.4 kh/W  0.25463    2.48$        2.48$   4.00%    1.00% US   NH
ETHASH      ethereum    N-ClaymoreETH          60  38.1 mh/s          140 272.4 kh/W  0.25463    2.48$        2.48$   4.00%    1.00% US   NH
EQUIHASH    equihash    N-Bminer               60  533.8 h/s          143    3.7 h/W  0.24096    2.35$        2.35$   4.00%    2.00% US   NH
EQUIHASH    equihash    N-Bminer               60  533.8 h/s          143    3.7 h/W  0.24096    2.35$        2.35$   4.00%    2.00% US   NH
NEOSCRYPT   neoscrypt   N-CcminerKlaust        60   1.0 mh/s          137   7.5 kh/W  0.18370    1.79$        1.79$   4.00%          US   NH
NEOSCRYPT   neoscrypt   N-CcminerKlaust        60   1.0 mh/s          137   7.5 kh/W  0.18370    1.79$        1.79$   4.00%          US   NH
NIST5       nist5       N-Excavator            60  49.3 mh/s          141 350.8 kh/W  0.16793    1.63$        1.63$   4.00%    0.00% US   NH
NIST5       nist5       N-Excavator            60  49.3 mh/s          141 350.8 kh/W  0.16793    1.63$        1.63$   4.00%    0.00% US   NH
LYRA2V2     lyra2v2     N-CcminerPolytmos      60  42.5 mh/s          134 317.2 kh/W  0.16438    1.60$        1.60$   4.00%          US   NH
LYRA2V2     lyra2v2     N-CcminerPolytmos      60  42.5 mh/s          134 317.2 kh/W  0.16438    1.60$        1.60$   4.00%          US   NH
SKUNK       skunk       N-CcminerTpruvot       60  29.5 mh/s          129 228.8 kh/W  0.15673    1.53$        1.53$   4.00%    0.00% US   NH
SKUNK       skunk       N-CcminerTpruvot       60  29.5 mh/s          129 228.8 kh/W  0.15673    1.53$        1.53$   4.00%    0.00% US   NH
KECCAK      keccak      N-Excavator            60 836.6 mh/s          143   5.8 mh/W  0.14170    1.38$        1.38$   4.00%    0.00% US   NH
KECCAK      keccak      N-Excavator            60 836.6 mh/s          143   5.8 mh/W  0.14170    1.38$        1.38$   4.00%    0.00% US   NH
X11GOST     x11gost     N-ccminerPalgin        60  13.2 mh/s          132  99.6 kh/W  0.07217    0.70$        0.70$   4.00%          US   NH
X11GOST     x11gost     N-ccminerPalgin        60  13.2 mh/s          132  99.6 kh/W  0.07217    0.70$        0.70$   4.00%          US   NH
PASCAL      pascal      N-Excavator            60   1.1 gh/s          144   7.9 mh/W  0.06830    0.66$        0.66$   4.00%    0.00% US   NH
PASCAL      pascal      N-Excavator            60   1.1 gh/s          144   7.9 mh/W  0.06830    0.66$        0.66$   4.00%    0.00% US   NH
LBRY        lbry        N-ccminerAlexisHSR     60 303.3 mh/s          142   2.1 mh/W  0.01430    0.14$        0.14$   4.00%    0.00% US   NH
LBRY        lbry        N-ccminerAlexisHSR     60 303.3 mh/s          142   2.1 mh/W  0.01430    0.14$        0.14$   4.00%    0.00% US   NH
BLAKE2S     blake2s     N-CcminerPolytmos      60   4.2 gh/s          143  29.3 mh/W  0.00000    0.00$        0.00$   4.00%          US   NH
BLAKE2S     blake2s     N-CcminerPolytmos      60   4.2 gh/s          143  29.3 mh/W  0.00000    0.00$        0.00$   4.00%          US   NH
BLAKE2S     blake2s     N-ccminerAlexisHSR     60   4.2 gh/s          143  29.3 mh/W  0.00000    0.00$        0.00$   4.00%    0.00% US   NH

Code:

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************                           BASIC OPTIONS                          ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************

-- Your rig ID

@@WORKERNAME=BENCH

--Autoexchange pools preferred currencies.
--You can set a generic currency for all autoexchange pools @@CURRENCY=XXX or a specific currency for one pool @@CURRENCY_NAMEOFPOOL=BTC valid only for that pool
--pools without autoexchange (yiimp, suprnova...) need a wallet of same coin you are mining
--You must be sure selected pool support pay that coin or you can lose your money.
--You must set wallet for this currencies on "Wallets Section"

@@CURRENCY=XVG
@@CURRENCY_NAMEOFPOOL=XXX

-- Local currency shown within the profits screen (DOLLAR, EURO, GBP)

@@LOCALCURRENCY=DOLLAR

-- Location of your rig: EUROPE/US/ASIA (by default "US" will be used for pools that don't require or support this setting)

@@LOCATION=US

-- Pool user name for non-anonymous pools such as SprNova, BlocksFactory, or MiningPoolHub
-- You can ignore this setting if you're not using these types of pools

@@USERNAME=bachsolo

-- For auto exchange pools. You only need set a wallet for your preferred currencies (@@currency).
-- Other pools without an auto exchange, like Yiimp, will need a wallet defined for the same coin you are mining.
-- You can add wallets using pattern  @@WALLET_XXX=YYYYY (where XXX=currency symbol; YYYYY=your wallet).
-- For Nicehash if a @@WALLET_BTC_NICE=XXXXXXX is found it will be used, if not @@WALLET_BTC will be used.
-- For some coins, such as Electroneum, you will need a Payment ID. Add it after your address separated by a dot.

@@WALLET_BTC=1Pmi186CrnDtmDmjsjV9Bycbev9JqXiiKt
--@@WALLET_BTC=12PjPV5FBnyGrYR75sKTeQTU1dPoh6Wb12
--@@WALLET_BTC=15nV26qRSiNf42fjUwHtaFR7cT4umqWSQi
@@WALLET_DNR=DP9HCR1JT2f7hKHbhUZeNoFC2hBofHNyPN
@@WALLET_RDD-RdFqnaQ1vBxgoyoAe6ECbdY3GvapuvVCvq
@@WALLET_XVG=DRA3baBnoLeEpDa3RP2MwZ9BzMpnaFemiK

-- Number of minutes to mine as a donation each day (minimum 5 minutes or 0.34%)

@@DONATE=10

-- Use your cpu to mine: ENABLED = yes, DISABLED = no (you can start cpu alone mining also using -groupnames parameter in batch file)

@@CPUMINING=DISABLED

--Electricity cost, you can use this converter to get your BTC cost http://www.xe.com/es/currencyconverter/convert/?Amount=0%2C012&From=EUR&To=XBT
--Example for all day cost [{"HourStart":0,"HourEnd":23,"CostKwh":0.105609}]
--Example for two periods cost [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]

@@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.0000986078}]

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************   ADVANCED OPTIONS (don't change unless you know what you do)    ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************



-- Profit recheck interval time (in seconds) for each kind of pool
-- This interval recalculates and selects the most profitable algorithm 

@@INTERVAL_PPS=300
@@INTERVAL_PPLS=1800

-- Benchmarks interval time (less than 300 not recommended for GPU due to miners ramp time), if you want to use automatic gpu power limit configuration is recommended at least 600

@@BENCHMARKTIME=600

- When enabled miners stats are updated while real mining, if disabled miner stats only are updated while benchmarking (ENABLED/DISABLED)

@@LIVESTATSUPDATE=ENABLED

-- Screen to be shown at script start-up (WALLETS/CURRENT/HISTORY/PROFITS/STATS)

@@STARTSCREEN=PROFITS


-- Percent to switch miner/algo, new miner/algo only will be launched if new profit is greater than actual profit in specified percent (example: 10 means that new miner/algo must be 10% more profitable than actual to be launched)

@@PERCENTTOSWITCH=10


-- [OPTIONAL] API Keys
-- Some non-anonymous pools, such as Suprnova and MPH, require API keys to obtain wallet details or pool speed.
-- For example @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4
-- FORMAT: @@APIKEY_NAMEOFPOOL=XXXXXXXXXX) [optional] 


-- @@APIKEY_NAMEOFPOOL=XXXXXXXXXX
-- @@APIKEY_NAMEOFPOOL2=YYYYYYYYYY


-- [OPTIONAL] GPU Groups/PowerLimits
-- if you don´t set groups MM automatically makes 2 groups, one for all NVIDIA gpus and other for all AMD gpus
-- If you activate this option miners ports will be calculated dynamic mode, some software like ethmonitoring will not work due to miner dynamic port assignation
-- You can group your cards as you want. It's recommended to create a group for each card model in your rig, each group will be benchmarked and run separately (you can identify your GPU id's by launching GpuList.bat)
-- Type must be NVIDIA or AMD, 
-- You can set Powerlimits (MM must run in administrator mode and UAC disabled or prompt appears) for each NVIDIA group, MM will benchmark all miners with maximum value, done this, when a miner is maximum profit candidate MM will benchmark other power limits of that miner to find best. (zero means MM will not change Power Limit) 
-- Example1: @@GPUGROUPS=[{"GroupName" : "Card1","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card2","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card3","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"}]
-- Example2: @@GPUGROUPS=[{"GroupName" : "1080","Type":"NVIDIA","Gpus":"0,1,2,3,4","PowerLimits":"100,90,80"} , {"GroupName" : "RX580","Type":"AMD","Gpus":"0,1","PowerLimits":"0"} ]


@@GPUGROUPS=[{"GroupName":"1060","Type":"NVIDIA","Gpus":"0,1","PowerLimits":"60"}]


--[OPTIONAL]  Pools profit correction factors
--Usually pools revenue is overestimated, this factor allows manual correction (Profit= ReportedPoolProfit * @@POOLPROFITFACTOR)
--This values are based on experience


@@POOLPROFITFACTOR_AHASHPOOL=0.7
@@POOLPROFITFACTOR_NICEHASH=1
@@POOLPROFITFACTOR_MININGPOOLHUB=0.8
@@POOLPROFITFACTOR_ZPOOL=0.7
@@POOLPROFITFACTOR_ZERGPOOL=0.5


--Enabled or disable detailed log

@@DEBUGLOG=DISABLED


--Delayed miners closing, while new miner is starting, old one continue mining for specified seconds

@@DELAYCLOSEMINERS=0
 
 
--Min number of workers in a pool to be considered as "good"

@@MINWORKERS=20

-- This variable defines order for Whattomine based stats virtual pool, for each coin MM find in WTM it will search what real pool has this coin available, first found (in specified order) is selected.
-- Only this pools are compatible (they works at coin level): Yiimp, Suprnova, MiningPoolHub, ZergPool 
-- WTM profit is based on instant coin change rate, is recommended use pools with autoexchange on like MiningPoolHub and ZergPool


@@WHATTOMINEPOOLORDER=MiningPoolHub,ZergPool


--Algorithms, define what algorithms can be mined for MM, for an Algo can be mined must exists: 1. A pool, 2. A miner, 3. This config.
--If used, algorithm parameter from core.ps1 override this config.

@@ALGORITHMS_NVIDIA=bitcore,blake2s,blakecoin,c11,cryptonight,Equihash,Ethash,,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,groestl,hsr,jha,Keccak,keccakc,lbry,lyra2v2,lyra2z,Myriad-Groestl,Neoscrypt,nist5,pascal,phi,polytimos,sib,skein,skunk,timetravel,tribus,veltor,whirpool,x11evo,x11gost,x14,x16r,x17,xevan
@@ALGORITHMS_AMD=bitcore,blake,blake2s,cryptonight,darkcoin-mod,equihash,Ethash,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,Groestl,hsr,Keccak,lyra2v2,lyra2z,Myriad-groestl,neoscrypt,Pascal,phi,skein,tribus,vanilla,veltor,x11gost,xevan
@@ALGORITHMS_CPU=bitcore,blakecoin,cryptonight,hmq1725,jha,keccak,keccakc,lyra2v2,lyra2z,m7m,neoscrypt,nist5,phi,polytimos,timetravel,tribus,veltor

 


-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************                           BASIC OPTIONS                          ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************

-- Your rig ID

@@WORKERNAME=BENCH

--Autoexchange pools preferred currencies.
--You can set a generic currency for all autoexchange pools @@CURRENCY=XXX or a specific currency for one pool @@CURRENCY_NAMEOFPOOL=BTC valid only for that pool
--pools without autoexchange (yiimp, suprnova...) need a wallet of same coin you are mining
--You must be sure selected pool support pay that coin or you can lose your money.
--You must set wallet for this currencies on "Wallets Section"

@@CURRENCY=XVG
@@CURRENCY_NAMEOFPOOL=XXX


-- Local currency shown within the profits screen (DOLLAR, EURO, GBP)

@@LOCALCURRENCY=DOLLAR

-- Location of your rig: EUROPE/US/ASIA (by default "US" will be used for pools that don't require or support this setting)

@@LOCATION=US

-- Pool user name for non-anonymous pools such as SprNova, BlocksFactory, or MiningPoolHub
-- You can ignore this setting if you're not using these types of pools

@@USERNAME=abc123

-- For auto exchange pools. You only need set a wallet for your preferred currencies (@@currency).
-- Other pools without an auto exchange, like Yiimp, will need a wallet defined for the same coin you are mining.
-- You can add wallets using pattern  @@WALLET_XXX=YYYYY (where XXX=currency symbol; YYYYY=your wallet).
-- For Nicehash if a @@WALLET_BTC_NICE=XXXXXXX is found it will be used, if not @@WALLET_BTC will be used.
-- For some coins, such as Electroneum, you will need a Payment ID. Add it after your address separated by a dot.

@@WALLET_BTC=1mi186CrnDtmDmj.....
--@@WALLET_BTC=1PjPV5FBnyGrY.....
--@@WALLET_BTC=1nV26qRSi.....
@@WALLET_DNR=DP9HR1JT2f7hKHhU.....
@@WALLET_RDD-RdFqnaQ1vBxgoy.....
@@WALLET_XVG=DRA3aBnoLeEpDa.....

-- Number of minutes to mine as a donation each day (minimum 5 minutes or 0.34%)

@@DONATE=10

-- Use your cpu to mine: ENABLED = yes, DISABLED = no (you can start cpu alone mining also using -groupnames parameter in batch file)

@@CPUMINING=DISABLED

--Electricity cost, you can use this converter to get your BTC cost http://www.xe.com/es/currencyconverter/convert/?Amount=0%2C012&From=EUR&To=XBT
--Example for all day cost [{"HourStart":0,"HourEnd":23,"CostKwh":0.105609}]
--Example for two periods cost [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]

@@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.0000986078}]

-- **********************************************************************************************************
-- ********************                                                                  ********************
-- ********************   ADVANCED OPTIONS (don't change unless you know what you do)    ********************
-- ********************                                                                  ********************
-- **********************************************************************************************************



-- Profit recheck interval time (in seconds) for each kind of pool
-- This interval recalculates and selects the most profitable algorithm 

@@INTERVAL_PPS=300
@@INTERVAL_PPLS=1800

-- Benchmarks interval time (less than 300 not recommended for GPU due to miners ramp time), if you want to use automatic gpu power limit configuration is recommended at least 600

@@BENCHMARKTIME=600

- When enabled miners stats are updated while real mining, if disabled miner stats only are updated while benchmarking (ENABLED/DISABLED)

@@LIVESTATSUPDATE=ENABLED

-- Screen to be shown at script start-up (WALLETS/CURRENT/HISTORY/PROFITS/STATS)

@@STARTSCREEN=PROFITS


-- Percent to switch miner/algo, new miner/algo only will be launched if new profit is greater than actual profit in specified percent (example: 10 means that new miner/algo must be 10% more profitable than actual to be launched)

@@PERCENTTOSWITCH=10


-- [OPTIONAL] API Keys
-- Some non-anonymous pools, such as Suprnova and MPH, require API keys to obtain wallet details or pool speed.
-- For example @@APIKEY_MINING_POOL_HUB=a04e6sx30b38f73878ae40775f70efseff6582e8ec37600215755487ccbd36b4510b4
-- FORMAT: @@APIKEY_NAMEOFPOOL=XXXXXXXXXX) [optional] 


-- @@APIKEY_NAMEOFPOOL=XXXXXXXXXX
-- @@APIKEY_NAMEOFPOOL2=YYYYYYYYYY


-- [OPTIONAL] GPU Groups/PowerLimits
-- if you don´t set groups MM automatically makes 2 groups, one for all NVIDIA gpus and other for all AMD gpus
-- If you activate this option miners ports will be calculated dynamic mode, some software like ethmonitoring will not work due to miner dynamic port assignation
-- You can group your cards as you want. It's recommended to create a group for each card model in your rig, each group will be benchmarked and run separately (you can identify your GPU id's by launching GpuList.bat)
-- Type must be NVIDIA or AMD, 
-- You can set Powerlimits (MM must run in administrator mode and UAC disabled or prompt appears) for each NVIDIA group, MM will benchmark all miners with maximum value, done this, when a miner is maximum profit candidate MM will benchmark other power limits of that miner to find best. (zero means MM will not change Power Limit) 
-- Example1: @@GPUGROUPS=[{"GroupName" : "Card1","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card2","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"},{"GroupName" : "Card3","Type":"NVIDIA","Gpus":"0","PowerLimits":"0"}]
-- Example2: @@GPUGROUPS=[{"GroupName" : "1080","Type":"NVIDIA","Gpus":"0,1,2,3,4","PowerLimits":"100,90,80"} , {"GroupName" : "RX580","Type":"AMD","Gpus":"0,1","PowerLimits":"0"} ]


@@GPUGROUPS=[{"GroupName":"1060","Type":"NVIDIA","Gpus":"0,1","PowerLimits":"60"}]


--[OPTIONAL]  Pools profit correction factors
--Usually pools revenue is overestimated, this factor allows manual correction (Profit= ReportedPoolProfit * @@POOLPROFITFACTOR)
--This values are based on experience


@@POOLPROFITFACTOR_AHASHPOOL=0.7
@@POOLPROFITFACTOR_NICEHASH=1
@@POOLPROFITFACTOR_MININGPOOLHUB=0.8
@@POOLPROFITFACTOR_ZPOOL=0.7
@@POOLPROFITFACTOR_ZERGPOOL=0.5


--Enabled or disable detailed log

@@DEBUGLOG=DISABLED


--Delayed miners closing, while new miner is starting, old one continue mining for specified seconds

@@DELAYCLOSEMINERS=0
 
 
--Min number of workers in a pool to be considered as "good"

@@MINWORKERS=20

-- This variable defines order for Whattomine based stats virtual pool, for each coin MM find in WTM it will search what real pool has this coin available, first found (in specified order) is selected.
-- Only this pools are compatible (they works at coin level): Yiimp, Suprnova, MiningPoolHub, ZergPool 
-- WTM profit is based on instant coin change rate, is recommended use pools with autoexchange on like MiningPoolHub and ZergPool


@@WHATTOMINEPOOLORDER=MiningPoolHub,ZergPool


--Algorithms, define what algorithms can be mined for MM, for an Algo can be mined must exists: 1. A pool, 2. A miner, 3. This config.
--If used, algorithm parameter from core.ps1 override this config.

@@ALGORITHMS_NVIDIA=bitcore,blake2s,blakecoin,c11,cryptonight,Equihash,Ethash,,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,groestl,hsr,jha,Keccak,keccakc,lbry,lyra2v2,lyra2z,Myriad-Groestl,Neoscrypt,nist5,pascal,phi,polytimos,sib,skein,skunk,timetravel,tribus,veltor,whirpool,x11evo,x11gost,x14,x16r,x17,xevan
@@ALGORITHMS_AMD=bitcore,blake,blake2s,cryptonight,darkcoin-mod,equihash,Ethash,Ethash_Blake2b,Ethash_Blake14r,Ethash_Keccak,Ethash_blake2s,Ethash_pascal,Ethash_Lbry,Groestl,hsr,Keccak,lyra2v2,lyra2z,Myriad-groestl,neoscrypt,Pascal,phi,skein,tribus,vanilla,veltor,x11gost,xevan
@@ALGORITHMS_CPU=bitcore,blakecoin,cryptonight,hmq1725,jha,keccak,keccakc,lyra2v2,lyra2z,m7m,neoscrypt,nist5,phi,polytimos,timetravel,tribus,veltor

I think is your config file content:

A) All is duplicated (at least in your post)
B) @@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.0000986078}] --> @@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwh":0.0000986078}]

Test it and tell me

[bttalkdim2]

Hi,

In Patterns/excavatorPattern.txt
you listed twice {"id":1,"method":"worker.add","params":["0","#GPUID#"]}
because of that - Neoscrypt not work on Excavator.

also you have to add Neoscrypt  to json file for Excavator

[tutulfo]

Hi,

In Patterns/excavatorPattern.txt
you listed twice {"id":1,"method":"worker.add","params":["0","#GPUID#"]}
because of that - Neoscrypt not work on Excavator.

also you have to add Neoscrypt  to json file for Excavator

Changed in master code

[jbonifacio]

I think is your config file content:

A) All is duplicated (at least in your post)
B) @@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwhBTC":0.0000986078}] --> @@ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwh":0.0000986078}]

Test it and tell me



You are correct - good eye - I completely missed that - thank you

[origin-AL]

I never used afterburner via command line but I supose must be something like that

c:\program files\afterburner\afterburner.exe -p 3

Look for afterburner command line help to see how invoke

Couldn't get it to work,

I found this regarding what the command line should be -https://bitcointalk.org/index.php?topic=2105295.0

Whenever I put anything in the PrelaunchCommand it tells me 'Bad formed json'

Here is what I tried:


"PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe -profile3"
"PrelaunchCommand":""C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -profile3"
"PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -profile3

I noticed you have he new power limit feature (havent tried since I don't pay for electicity at my place).
Would it be possible to use this to undervolt one algo (or miner with one algo)?
That would be a ton simpler.

Right now I just undervolted my entire rig but still got a shutdown on trupivot tribus last night.  I believe that algo the power spikes so much that you have to just limit the whole thing to give it a larger margin of error (or upgrade psu).

[tutulfo]

I never used afterburner via command line but I supose must be something like that

c:\program files\afterburner\afterburner.exe -p 3

Look for afterburner command line help to see how invoke

Couldn't get it to work,

I found this regarding what the command line should be -https://bitcointalk.org/index.php?topic=2105295.0

Whenever I put anything in the PrelaunchCommand it tells me 'Bad formed json'

Here is what I tried:


"PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe -profile3"
"PrelaunchCommand":""C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -profile3"
"PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe" -profile3

if you are adding in middle of other fields

"PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe -profile3",

[origin-AL]

I have tried that before, and just tried again.

Gives me an error on startup

--------------BAD FORMED JSON: N-CcminerTruvot.json

This is what I have in the miner file:

"APIPort" : 4068,
"PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe -profile3",
"Algorithms": [

Any time I change the prelaunch command it gives me that error and it goes away once I delete the command.

[JukNi]

Every startup and every algos exchange my latest (cloned on my desktop) Megaminer downloads or try at least these two...

***
02/26/2018 16:53:58...... Downloading....https... ccminer_cuda9.exe
02/26/2018 16:54:07...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:05:52...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:06:03...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:11:29...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:11:38...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:23:17...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:23:29...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:35:08...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:35:19...... Downloading....https... ccminer_x86.exe

..and so on? (Links removed by admins or something)

Everything works just fine and every algos has benchmarked and I can mine what I need to.
This is not a problem more like "I wonder why this situation"

Just want to say thank you of this awesome miner. I would donate but program does it for me 

[4ward]

Strange behavior in latest version, noticed it once and not sure how to reproduce:

Megaminer switches to a coin which is profitable at the moment, interval finishes and it continues to mine same coin while showing it's profit as very high in the "Active Miners"

At the same time, in "Profits" screen, this coin is now significantly lower in profitability (way below the "PercentToSwitch")

Even after ending interval manually it continues to mine it, only restarting MegaMiner solves this

[Chosscoin]

I'm testing this software

Is it normal for the benchmark to take so long?

Another question, each time it changes, the program tries to download 2 miners that never seem to download, ccminer_cuda9.exe from msvc2015 and ccminer xevan. Is there a problem with this?

Thank you

[tutulfo]

I have tried that before, and just tried again.

Gives me an error on startup

--------------BAD FORMED JSON: N-CcminerTruvot.json

This is what I have in the miner file:

"APIPort" : 4068,
"PrelaunchCommand":"C:\Program Files (x86)\MSI Afterburner\MSIAfterburner.exe -profile3",
"Algorithms": [

Any time I change the prelaunch command it gives me that error and it goes away once I delete the command.

Please, open an issue in github and upload your miner file, i will test it.

[tutulfo]

Every startup and every algos exchange my latest (cloned on my desktop) Megaminer downloads or try at least these two...

***
02/26/2018 16:53:58...... Downloading....https... ccminer_cuda9.exe
02/26/2018 16:54:07...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:05:52...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:06:03...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:11:29...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:11:38...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:23:17...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:23:29...... Downloading....https... ccminer_x86.exe
***
02/26/2018 17:35:08...... Downloading....https... ccminer_cuda9.exe
02/26/2018 17:35:19...... Downloading....https... ccminer_x86.exe

..and so on? (Links removed by admins or something)

Everything works just fine and every algos has benchmarked and I can mine what I need to.
This is not a problem more like "I wonder why this situation"

Just want to say thank you of this awesome miner. I would donate but program does it for me 

I find the problem, you can download that miners manually or download from github master branch include.ps1 file and replace yours.

[tutulfo]

Strange behavior in latest version, noticed it once and not sure how to reproduce:

Megaminer switches to a coin which is profitable at the moment, interval finishes and it continues to mine same coin while showing it's profit as very high in the "Active Miners"

At the same time, in "Profits" screen, this coin is now significantly lower in profitability (way below the "PercentToSwitch")

Even after ending interval manually it continues to mine it, only restarting MegaMiner solves this

I will put an eye on it, but I never seen.


What hashrates show each section?.

[tutulfo]

I'm testing this software

Is it normal for the benchmark to take so long?

Another question, each time it changes, the program tries to download 2 miners that never seem to download, ccminer_cuda9.exe from msvc2015 and ccminer xevan. Is there a problem with this?

Thank you

Default benchmark is 500 seconds for each algo and miner. Due to quantity of miners/algo, several hours are required.

You can decrease benchmark time in config.txt but is less acurate.

@@BENCHMARKTIME=500


About miners download, see previous post.

[skablast]

First of all, very good idea indeed  to include electricity cost and euro!

I am trying  to have a   couple of "BTC" pool (Zergpool & Ahashpool) working:

Autoexec:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

:LOOP
del "Stats\*_Profit.txt"

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1 -MiningMode AUTOMATIC -PoolsName ahashpool,zergpool LOOP

Config:
 
WORKERNAME=EOLO

--Autoexchange pools preferred currencies.
--You can set a generic currency for all autoexchange pools @@CURRENCY=XXX or a specific currency for one pool
CURRENCY_NAMEOFPOOL=BTC valid only for that pool
--pools without autoexchange (yiimp, suprnova...) need a wallet of same coin you are mining
--You must be sure selected pool support pay that coin or you can lose your money.
--You must set wallet for this currencies on "Wallets Section"

CURRENCY=btc
CURRENCY_Ahashpool=btc
Currency Zergpool= Btc

LOCALCURRENCY=EURO

USERNAME=1MfauXbYE9pbRgU4qAzZQf75XjENatkJn6


WALLET_BTC=1MfauXbYE9pbRgU4qAzZQf75XjENatkJn6
@@WALLET_XXX=ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

DONATE=10


CPUMINING=DISABLED

--Electricity cost, you can use this converter to get your BTC cost http://www.xe.com/es/currencyconverter/convert/?Amount=0%2C012&From=EUR&To=XBT
--Example for all day cost [{"HourStart":0,"HourEnd":23,"CostKwh":0.105609}]
--Example for two periods cost [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]

ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwh":0.11}]

But I receive this in RED:

New interval starting.............
ConvertFrom-Json : Impossibile associare l'argomento al parametro 'InputObject' perché è null.
In C:\mining\Megaminer-master\core.ps1:297 car:63
+ ... ostValue= [double](($config.ElectricityCost |ConvertFrom-Json) |where ...
+                                                  ~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidData: ( [ConvertFrom-Json], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.PowerShell.Commands.ConvertFromJsonCommand
Loading Pools Information.............
ZERGPOOL API NOT RESPONDING...ABORTING
NO POOLS!....retry in 10 sec ---

So, I didn't make one mistake, I make two ...at least.

Any expert may look at it please ?

[tutulfo]

First of all, very good idea indeed  to include electricity cost and euro!

I am trying  to have a   couple of "BTC" pool (Zergpool & Ahashpool) working:

Autoexec:

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

:LOOP
del "Stats\*_Profit.txt"

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1 -MiningMode AUTOMATIC -PoolsName ahashpool,zergpool LOOP

Config:
 
WORKERNAME=EOLO

--Autoexchange pools preferred currencies.
--You can set a generic currency for all autoexchange pools @@CURRENCY=XXX or a specific currency for one pool
CURRENCY_NAMEOFPOOL=BTC valid only for that pool
--pools without autoexchange (yiimp, suprnova...) need a wallet of same coin you are mining
--You must be sure selected pool support pay that coin or you can lose your money.
--You must set wallet for this currencies on "Wallets Section"

CURRENCY=btc
CURRENCY_Ahashpool=btc
Currency Zergpool= Btc

LOCALCURRENCY=EURO

USERNAME=1MfauXbYE9pbRgU4qAzZQf75XjENatkJn6


WALLET_BTC=1MfauXbYE9pbRgU4qAzZQf75XjENatkJn6
@@WALLET_XXX=ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ

DONATE=10


CPUMINING=DISABLED

--Electricity cost, you can use this converter to get your BTC cost http://www.xe.com/es/currencyconverter/convert/?Amount=0%2C012&From=EUR&To=XBT
--Example for all day cost [{"HourStart":0,"HourEnd":23,"CostKwh":0.105609}]
--Example for two periods cost [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]

ELECTRICITYCOST=[{"HourStart":0,"HourEnd":23,"CostKwh":0.11}]

But I receive this in RED:

New interval starting.............
ConvertFrom-Json : Impossibile associare l'argomento al parametro 'InputObject' perché è null.
In C:\mining\Megaminer-master\core.ps1:297 car:63
+ ... ostValue= [double](($config.ElectricityCost |ConvertFrom-Json) |where ...
+                                                  ~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidData: ( [ConvertFrom-Json], ParameterBindingValidationException
    + FullyQualifiedErrorId : ParameterArgumentValidationErrorNullNotAllowed,Microsoft.PowerShell.Commands.ConvertFromJsonCommand
Loading Pools Information.............
ZERGPOOL API NOT RESPONDING...ABORTING
NO POOLS!....retry in 10 sec ---

So, I didn't make one mistake, I make two ...at least.

Any expert may look at it please ?

At least you need @@ in front of each variable...as config.txt example

[skablast]

Sorry, Tutulfo.
I am ashamed that you spent your time for such a stupid question.

I will let it run ( as its working now, even if its not really "fool proof"  tested by me-fool )

and then I hope I will have better question

[warnerdark]

Hello
when I run the "start.bat" everything works fine with the first parameters chosen but at the next interval, the script stops and I have a message in the log: "DUPLICATED ALGO NEOSCRYPT NEOSCRYPT ON A-ClaymoreNeo A-ClaymoreNeo "
but the miner continues in the background
Should I forget to set a parameter?

[skablast]

Ok, 48h hours later... test is finished... on the 3 Mixed Rigs we have for testing

and I got plenty of question and few remarks:

Claymore dual with NVDA doesn't seem to hit the sweet spot of DCR 135 for the GTX 1070
Claymore dual with Amd  doesn't seem to hit the sweet spot of DCR 14 for Rx 550, 35 for Rc 570 and 51 for RX 580




1) There is an easy way ( not script programming) to set up DCR for each board ? And also VCCC, MCCC etc? Because everybody have his own overclocking ( I just try to find the lowest power consumption, but some else may just look for performance)
2) Ideally will be wonderful, lets say to be able to change intensity in Claymore  Neoscript, and just Benchmark that one and not all the algos for AMD

3) Ideally will be wonderful to be able to choose on the fly one particular algo. Today for example, I don't know why , but in Ahashpool  for 2 hours Neoscript went Crazy for Nvda doubling the earning of the benchmark, well, I was there  and if I was able to "force" to use the AMD card on Neoscript, they will have better ROI than Dual mining.
Or  "pairing" benchmark result between groups" when the "live" performance of one group set a +X% ?

A simple yes/you can do it already solution is alreay in the discussion/NO /No way will be helpful