Signatum (skunk) ccminer-krnlx 30+mh 1070, 52.5+ mh 1080ti [FREE,OPENSOURCE]

[PolarFiasco]

Here is a windows binary built from the source. No mods made. Just a build. Can confirm it works on my gtx 970 nothing else. As for hashrate it seemed a little lower than spmod3 but I was at i 16.
Here you go.

I uploaded to a few places
ufile<dot>io/haxxr

nofile<dot>io/f/yLsTJy3dL9a/ccminer.exe

cheers


Maybe? a tip? But not needed or necesary! Tip the dev better.
B8zNWAJiQ5AEVdLZJDZfiQ2WDxYy72w1RG

And here is the 64 bit release.
nofile<dot>io/f/s49HoBZTqW0/ccminer.exe

A curiosity question -- why are these files 45mb and 55mb in size?

Others that compiled your own binaries, were they this large as well?

Obviously VT detects this binaries as PUA and Bitcoinminer etc... I don't see anything that screams there is something wrong with these files so I want to be clear that I'm not implying anything with my question; I'm just curious what makes them so large.

So I posted the above earlier, two previous binaries that were shared were 45 and 55mb by a Hero Member here

Now this one below is 30mb from a noob account?

So i finnaly managed to compile this miner for linux ( i use nvOC for mining )

For all those who cant get this compiled, here is my compiled version:

https://ufile.io/kxlay
https://www.file-upload.com/6m9ekmvm6qrz

Anyone out there care to explain the difference?

My windows builds are 45 and 55 MB too.  Epsylon3's 64bit build is only 14 MB...but he knows what he is doing.  This one is Linux?  I really don't know but the first Window 64bit build posted here was removed by Windows Defender for me. My own build came back clean on the AV so hoping the source is clean.

Out of curiosity, can you upload your version to VT to see what flags it throws? It should get detected as PUA or Bitcoin mining software by some of the AV's at the minimum.

Hmm..not sure what to make of this...

32bit: bf3afb527ef9fcc198545e21401346d1bbb4140b8cb6e84b6b488046cb13fae4
64bit: d95fd19dd9acf42459287d1e9c4aaf728e4c2a584a905fa269dfb23f4384d388

The 64bit 55MB file looks clean, but the 32bit is coming back with Malware.Heuristic!ET#98% (rdm+) which is odd.  Going to run a full scan with another AV to see if anything comes back.

[mysimply]

Hi,

I've some question about "Intensity" option that I not set in bash script. It's automatic set to 19 as following below log:

[2017-08-08 10:59:04] Starting on stratum+tcp://sigt.pool.mn:8732
[2017-08-08 10:59:04] 6 miner threads started, using 'skunk' algorithm.
[2017-08-08 10:59:07] Stratum difficulty set to 0.00390625
[2017-08-08 10:59:07] skunk block 28955, diff 32703.377
[2017-08-08 10:59:07] GPU #1: Intensity set to 19, 524288 cuda threads!!!!
[2017-08-08 10:59:07] GPU #1: Intensity set to 19, 524288 cuda threads
[2017-08-08 10:59:07] GPU #0: Intensity set to 19, 524288 cuda threads!!!!
[2017-08-08 10:59:07] GPU #0: Intensity set to 19, 524288 cuda threads[2017-08-08 10:59:11] GPU #0: GeForce GTX 1080 Ti, 285.22 kH/s
[2017-08-08 10:59:11] GPU #3: GeForce GTX 1080 Ti, 284.48 kH/s
[2017-08-08 10:59:11] GPU #4: GeForce GTX 1080 Ti, 281.38 kH/s
[2017-08-08 10:59:11] GPU #2: GeForce GTX 1080 Ti, 279.85 kH/s
[2017-08-08 10:59:11] GPU #5: GeForce GTX 1080 Ti, 276.46 kH/s
[2017-08-08 10:59:11] GPU #1: GeForce GTX 1080 Ti, 275.47 kH/s
[2017-08-08 10:59:07] GPU #4: Intensity set to 19, 524288 cuda threads!!!!
[2017-08-08 10:59:07] GPU #4: Intensity set to 19, 524288 cuda threads
[2017-08-08 10:59:07] GPU #2: Intensity set to 19, 524288 cuda threads!!!!
[2017-08-08 10:59:07] GPU #2: Intensity set to 19, 524288 cuda threads
[2017-08-08 10:59:07] GPU #3: Intensity set to 19, 524288 cuda threads!!!!
[2017-08-08 10:59:07] GPU #3: Intensity set to 19, 524288 cuda threads
[2017-08-08 10:59:07] GPU #5: Intensity set to 19, 524288 cuda threads!!!!
[2017-08-08 10:59:07] GPU #5: Intensity set to 19, 524288 cuda threads


I've try to set 20 or 25. System crash and reboot. Please suggest me how to tune it? My hash rate only 40-45 per card. My system use Ubuntu 14.04, Cuda 8 and Nvidia Driver  381.22

[damNmad]

So i finnaly managed to compile this miner for linux ( i use nvOC for mining )

For all those who cant get this compiled, here is my compiled version:

https://ufile.io/kxlay
https://www.file-upload.com/6m9ekmvm6qrz

Doesn't seem to work for me!!

I've created a separate folder in Home on my nvOC setup, copied the ccminer to that folder and tried to run!!

miner not being getting detected, so i tried to run it using ./ccminer command, seems its expecting CUDA 7.5 or something!!

Anybody tested this?? please help

[jeblond]

on nvoc v018 has to work. i use nvoc on all my rigs...

but you need to install libcudart7.5 i think

sudo apt-get install libcudart7.5
sudo chmod 777 ccminer
./ccminer

try this.

[uhro]

I managed to build the project under windows with success.
I have approximately the same perf than SP3 on a 1070.

Here is the updated "how to" to build it:

You need:
- Visual Studio 2013 (Free edition)
- CUDA ToolKit 8
- GIT

And do the following :
git clone https://github.com/krnlx/ccminer-skunk-krnlx
git clone https://github.com/peters/curl-for-windows.git compat/curl-for-windows

Copy the second project inside the first project (you will see a folder called "compat")

Then open the ccminer.sln project using Visual Studio, and then BUILD/Compile

Then open the ccminer.sln project using Visual Studio, and then BUILD / Batch Build ... , and tick the build button next to "Release|win32". And then click the build button on the top right corner.

This worked just as listed for me, jumped my hash rates almost 40% over ccminer2.2 skunk

On a side note, the .exe was around 45 meg, took a while to compile but I have a bunch of other stuff going on this machine.

Great work krnlx!!!

[damNmad]

on nvoc v018 has to work. i use nvoc on all my rigs...

but you need to install libcudart7.5 i think

sudo apt-get install libcudart7.5
sudo chmod 777 ccminer
./ccminer

try this.

Thanks mate, it worked now, but I still have an issue with it!!

Previous ccminer was running straightaway on intensity 21, but this one only runs on 19 even i add -i 21!!

Any idea??

EDIT:

My bad, sorry, I've figured out. Thanks a lot for your help

[jeblond]

on nvoc v018 has to work. i use nvoc on all my rigs...

but you need to install libcudart7.5 i think

sudo apt-get install libcudart7.5
sudo chmod 777 ccminer
./ccminer

try this.

Thanks mate, it worked now, but I still have an issue with it!!

Previous ccminer was running straightaway on intensity 21, but this one only runs on 19 even i add -i 21!!

Any idea??

EDIT:

My bad, sorry, I've figured out. Thanks a lot for your help

Glad i could help

[santan]

It must be false positive by AV... I don't think someone will pollute the source in front of all experts here...
The community is so helpful .. Thanks for the uplift on this miner... and the build process....
I made 200 coins in 2  hour using just 2 Cards on the day of coin launch... but never expected it will become so popular.... should have continued..

[NoOneLt]

Guys what SIG pool you use, i am on suprnova but see at best 150 out of miner reported 190 MH... not happy at all.

Making about 10 SGT per hour at most. Donating 1% to the pool.

Suprnova dont' give a lot of stats unfortunately

[MnngSprvsr]

[2017-08-08 12:56:10] GPU #0: GeForce GTX 1060 6GB, 17.82 MH/s
[2017-08-08 12:56:15] GPU #4: GeForce GTX 1060 6GB, 17.98 MH/s
[2017-08-08 12:56:16] GPU #6: GeForce GTX 1060 6GB, 17.57 MH/s
[2017-08-08 12:56:17] GPU #3: GeForce GTX 1060 6GB, 17.37 MH/s
[2017-08-08 12:56:17] GPU #2: GeForce GTX 1060 6GB, 17.19 MH/s
[2017-08-08 12:56:17] GPU #5: GeForce GTX 1060 6GB, 17.18 MH/s
[2017-08-08 12:56:17] GPU #1: GeForce GTX 1060 6GB, 16.89 MH/s
[2017-08-08 12:56:25] GPU #5: GeForce GTX 1060 6GB, 16.90 MH/s
[2017-08-08 12:56:25] accepted: 2/2 (diff 2.193), 121.88 MH/s yes!

can please someone confirm that this is normal hashrate für 1060 Cards?
I think it is to low

[mysimply]

Guys what SIG pool you use, i am on suprnova but see at best 150 out of miner reported 190 MH... not happy at all.

Making about 10 SGT per hour at most. Donating 1% to the pool.

Suprnova dont' give a lot of stats unfortunately

Pool list that I know:

http://www.zpool.ca/
http://yiimp.ccminer.org/
https://sigt.suprnova.cc/
https://pool.mn/sigt
https://mining-enthusiasts.net/

I use pool.mn

[rdluffy]

[2017-08-08 12:56:10] GPU #0: GeForce GTX 1060 6GB, 17.82 MH/s
[2017-08-08 12:56:15] GPU #4: GeForce GTX 1060 6GB, 17.98 MH/s
[2017-08-08 12:56:16] GPU #6: GeForce GTX 1060 6GB, 17.57 MH/s
[2017-08-08 12:56:17] GPU #3: GeForce GTX 1060 6GB, 17.37 MH/s
[2017-08-08 12:56:17] GPU #2: GeForce GTX 1060 6GB, 17.19 MH/s
[2017-08-08 12:56:17] GPU #5: GeForce GTX 1060 6GB, 17.18 MH/s
[2017-08-08 12:56:17] GPU #1: GeForce GTX 1060 6GB, 16.89 MH/s
[2017-08-08 12:56:25] GPU #5: GeForce GTX 1060 6GB, 16.90 MH/s
[2017-08-08 12:56:25] accepted: 2/2 (diff 2.193), 121.88 MH/s yes!

can please someone confirm that this is normal hashrate für 1060 Cards?
I think it is to low

Yes, it's normal

You can downclock memory to -400, core + 170~190, PL 70% and set intensity to 25 to obtain better results

[santan]

Someone still trying to compile...... can try to change this line in ..... ccminer.cpp
From this

Code:

Sprintf (suppl, "diff% .3f", sharediff);

To this

Code:

Sprintf (suppl, "diff% .3f, best% .3f", sharediff, p-> best_share);

It would be cool to have this version of ccminer.... @Epsylon

[Za1n]

Here is a windows binary built from the source. No mods made. Just a build. Can confirm it works on my gtx 970 nothing else. As for hashrate it seemed a little lower than spmod3 but I was at i 16.
Here you go.

I uploaded to a few places
ufile<dot>io/haxxr

nofile<dot>io/f/yLsTJy3dL9a/ccminer.exe

cheers


Maybe? a tip? But not needed or necesary! Tip the dev better.
B8zNWAJiQ5AEVdLZJDZfiQ2WDxYy72w1RG

And here is the 64 bit release.
nofile<dot>io/f/s49HoBZTqW0/ccminer.exe

Fu*k,

I seen ppl reporting this one having a Trojan and i downloaded and tried this version on 3 of my rigs.

Any idea how to clean my pc properly now in case it was infected? :/

Dynamite it !!

Nahh im srs. I mean, ok, i deleted the files, but what if trojan horse got somewhere after i ran the app?

Should avira be enough?

Only surefire way is to wipe the machine completely and reinstall everything from the OS on up. Be sure to do a full reformat of the SDD/HDD as well before reinstalling.

The file may also have contained a worm that spread to other systems on your network, so you may want to check any other computers you may own over thoroughly as well.

As was suggested earlier, if you have wallets on any of those systems you may want to consider transferring the balances to a secure wallet first and just hope the Trojan is not lying in wait for you to unlock your wallet before front running you. Wipe those systems as well afterwards and reinstall everything fresh.

Are these steps a lot of work? Yes, but what do you expect when you download a .exe from some random guy on the Internet and then run it?

[cryptouse]

is there already compiled version for windows ?

regards

[damNmad]

[2017-08-08 12:56:10] GPU #0: GeForce GTX 1060 6GB, 17.82 MH/s
[2017-08-08 12:56:15] GPU #4: GeForce GTX 1060 6GB, 17.98 MH/s
[2017-08-08 12:56:16] GPU #6: GeForce GTX 1060 6GB, 17.57 MH/s
[2017-08-08 12:56:17] GPU #3: GeForce GTX 1060 6GB, 17.37 MH/s
[2017-08-08 12:56:17] GPU #2: GeForce GTX 1060 6GB, 17.19 MH/s
[2017-08-08 12:56:17] GPU #5: GeForce GTX 1060 6GB, 17.18 MH/s
[2017-08-08 12:56:17] GPU #1: GeForce GTX 1060 6GB, 16.89 MH/s
[2017-08-08 12:56:25] GPU #5: GeForce GTX 1060 6GB, 16.90 MH/s
[2017-08-08 12:56:25] accepted: 2/2 (diff 2.193), 121.88 MH/s yes!

can please someone confirm that this is normal hashrate für 1060 Cards?
I think it is to low

Yes, it's normal

You can downclock memory to -400, core + 170~190, PL 70% and set intensity to 25 to obtain better results

Everything else seems ok, but intensity doesn't seem to work!!

Though I set it as '-i 25' its still taking it as 21!

Any work around for this??

Thanks for sharing your OC settings/suggestions.

[astronyu]

I built the project from source on windows but I got allocation errors.

The compiled binary is here : sendspace <DOT> com/file/yxp59j

It is preferable to build it yourself to avoid any embedded viruses...

How to build.
Please give a step by step guide.
thanks

You need:
- Visual Studio 2013 (Free edition)
- CUDA ToolKit 8
- GIT

And do the following :
git clone https://github.com/krnlx/ccminer-skunk-krnlx
git clone https://github.com/peters/curl-for-windows.git compat/curl-for-windows

Copy the second project inside the first project (you will see a folder called "compat")

Then open the ccminer.sln project using Visual Studio, and then BUILD/Compile

Where did you download VS2013 from? I tried but download was not available on Microsoft.

[morcus]

I built the project from source on windows but I got allocation errors.

The compiled binary is here : sendspace <DOT> com/file/yxp59j

It is preferable to build it yourself to avoid any embedded viruses...

How to build.
Please give a step by step guide.
thanks

You need:
- Visual Studio 2013 (Free edition)
- CUDA ToolKit 8
- GIT

And do the following :
git clone https://github.com/krnlx/ccminer-skunk-krnlx
git clone https://github.com/peters/curl-for-windows.git compat/curl-for-windows

Copy the second project inside the first project (you will see a folder called "compat")

Then open the ccminer.sln project using Visual Studio, and then BUILD/Compile

Where did you download VS2013 from? I tried but download was not available on Microsoft.

I took it a long time ago on the microsoft website.
It seems to be available on this link but you need to create an account : https://www.visualstudio.com/vs/older-downloads/

[EvilMonkey]

https://github.com/krnlx/ccminer-skunk-krnlx

Absolutely free -  no fee's, no viruses, etc. Based on Alexis Provos code.

 

tested on linux, no win version now -( But You can compile!

1080Ti:

Code:

[2017-08-07 13:22:41] accepted: 58/59 (diff 1.720), 99.51 MH/s yes!
[2017-08-07 13:22:49] GPU #0: GeForce GTX 1080 Ti, 51.35 MH/s
[2017-08-07 13:22:49] accepted: 59/60 (diff 1.527), 99.51 MH/s yes!
[2017-08-07 13:23:03] GPU #1: GeForce GTX 1080 Ti, 50.47 MH/s
[2017-08-07 13:23:03] accepted: 60/61 (diff 2.016), 101.17 MH/s yes!
[2017-08-07 13:23:05] GPU #0: GeForce GTX 1080 Ti, 51.34 MH/s
[2017-08-07 13:23:06] accepted: 61/62 (diff 0.642), 101.17 MH/s yes!
[2017-08-07 13:23:18] skunk block 27949, diff 34053.279
[2017-08-07 13:23:37] GPU #1: GeForce GTX 1080 Ti, 50.42 MH/s
[2017-08-07 13:23:37] accepted: 62/63 (diff 1.847), 101.50 MH/s yes!
[2017-08-07 13:23:41] GPU #0: GeForce GTX 1080 Ti, 51.31 MH/s
[2017-08-07 13:23:45] accepted: 63/64 (diff 0.635), 101.50 MH/s yes!
[2017-08-07 13:23:58] GPU #0: GeForce GTX 1080 Ti, 51.30 MH/s
[2017-08-07 13:23:58] accepted: 64/65 (diff 0.389), 101.50 MH/s yes!
[2017-08-07 13:24:02] GPU #1: GeForce GTX 1080 Ti, 50.51 MH/s

Feel free to donate SIGT BLq8t6NQrfRC8kFyrvZ5YMGY33SVCQBeT4

I don't trust people posting here. I had all sorts of errors trying to compile.  If you added already compiled versions to your Git I am sure people would do alot more donating.

[dexxa05]

Hi Guys,

How much did you get with normal 1080s not the TI ?!

Thx in advance