Signatum (skunk) ccminer-krnlx 30+mh 1070, 52.5+ mh 1080ti [FREE,OPENSOURCE]

[WarrenP]

You can all try it for yourselves. Test with palgin and krnlx and spmod3/5 miners. I tested these with suprnova. Since the hash rate in the dashboard being shown by suprnova is continuously changing, I decided to test the miners with the SIGT coins I'm mining.

Yes, it was not a scientific test, I just wanted to have a rough estimate because I noticed the coins I'm mining suddenly dropped when I used krnlx. I wasn't sure at first if it was because of the difficulty in SIGT and the many miners in suprnova or it was due to krnlx. So I created 2 accounts in suprnova. I have  2 almost identical rigs, 6 x GTX1060 on rig1 and 5 x GTX 1060 on rig2. The first test was running spmod3 on rig2 and krnlx on rig1. I didn't configure the rigs to be of the exact number of gpus because I will lose mining time for a couple of hours if disable one gpu. After more than an hour, I had almost the same number of coins mined. It meant krnlx was mining slower than spmod3 because it was using 6 gpus. The next test was running palginmod on rig 1 and spmod3 on rig2. This time, palginmod mined more coins, which should be the case since it is running on 6 gpus. If I divide the number of coins per gpu, the average coin per gpu was the same for palginmod and spmod3, which meant in my crude test that both miners seem to be performing equally.

There seems to be a problem with krnlx even it is showing more hash rate per second. Those of you who have a lot more resources and time can test krnlx more extensively.  For now, I'm going back to palginmod or spmod. Check also a test run by jimboscott here https://bitcointalk.org/index.php?topic=2030529.4700   He has the same observations.

Interesting observation. Thank you for the information. I am going to do some investigation myself.

[1714974691]

1714974691

[FFI2013]

wow I just bought some 1070s to replace my r9 cards there killing me on power compared to my rx cards but wanted to mine signatum now I read the miner issues what miner is recommend I  never owned a nivida  card in my life so the help is appreciated thanks

[Bibi187]

wow I just bought some 1070s to replace my r9 cards there killing me on power compared to my rx cards but wanted to mine signatum now I read the miner issues what miner is recommend I  never owned a nivida  card in my life so the help is appreciated thanks

I actually use krnlx, but i think u gone swap to epsylon ccminer build. He got improvement on 13 august on skunk, based on krnlx withtout the share problem

https://bitcointalk.org/index.php?topic=770064.0

Link to source code :

https://github.com/tpruvot/ccminer

But u maybe want to go to another crypto actually, sigt is less rentable actually, lot of people sell it.

[kinzey]

thank you for the info guys... 

[sundownz]

Decided to update all 24 of my machines doing SIGT to the new CC miner 2.2 today. Results below so far.

https://ibb.co/kqkXjv
** Image Link

Seems to achieve the ~5% gain I noted on individual machines once it settles (the other machines averages 5% vs the 10% on the 1080 Ti I did this morning).

[sundownz]

Decided to update all 24 of my machines doing SIGT to the new CC miner 2.2 today. Results below so far.

https://ibb.co/kqkXjv
** Image Link

Seems to achieve the ~5% gain I noted on individual machines once it settles (the other machines averages 5% vs the 10% on the 1080 Ti I did this morning).

It seems to still be climbing on the pool side -- I will update again later this evening with another graph to see if it maintains the full gain.

[sundownz]

https://ibb.co/iZpH1a
** Image Link

I am seeing very solid holding at 2 GH (peaking at 2.2-2.3 GH) now vs seeing it peak at 2 GH and average 1.8-1.9 GH prior.

So I will say I am very satisfied with CC Miner 2.2

[castillojim]

Somebody if possible can put the link to compiled ccminer 2 August 13 with cuda 8 for Linux, i can´t do it.

[faxxer]

What best rate u can achieve with 1060? I got around 40card to mine this coin.

[antiycda]

What best rate u can achieve with 1060? I got around 40card to mine this coin.

17m per card

[umine]

Really great miner. Get about 29.5-30.0 Mh/s from single GTX1070 Palit SJS, downvolted to 950 mV. Rig with 6xGTX1070 is stable for some days and gets about 175-180 Mh/s:

[mrkhajit]

I'm love this version. Thank you for sharing.

[Bibi187]

Just done use krnlx version, high hashrate, low shares ...
Go on the new ccminer 2.2 tpruvot 13 august release, same hashrate, more shares.
Sad for us krnlx release never get fix ... Dev a prolly something to do more urgent ...
U can get SP_mod to ( u have to pay to expensive for little miner )

[mirny]

Finally I was able to compile some binaries on windows.
But can you tell me how to compile ccminer with cuda 7.5?
I used your tutorial, but instead of Cuda8, I installed Cuda7.5,
but then I get an error in visual studio, that it cant find cuda,
do you know how to solve this?
cheers

[Epsylon3]

check the cuda-9 commit, its the same (in vcxproj)

[sunnydmd]

Can someone share Windows compiled for me? I don't know how to compile

[manhcuong87]

There was spmod8. Can you share it?

[hous26]

Is this one that you have to unpack?  I prefer the miners i can just copy my bat file into. 

[Real_Unhooked]

So looks like Truv latest version is the best

[Bibi187]

So looks like Truv latest version is the best

Totally right, krnlx fuckup your share rate ... u gona get more from Palgin and tpru, i dont test the new palgin cause only windows version.
Tpru is best free miner actually, krnlx just kill a week of mining for me ... First and last time i get a miner from him.