[CMD]FarmWatchBot, Claymore, Bminer, Dstm, CC, Eth, CastXMR, Phoenix, Trex, Gmnr

[coke15]

hi

works great with ncidia but i gave problem with amd:

how to put more than 1 card?

gpus=0   =1 card
gpus=4   =1 card
gpus=0,1,2,3 =1 card

what i misse?

on nvidia gpus=0  =5 cards

hi still no solution?

Hello. Sorry but I dont completely understand your question.

gpus=0 - autodetect gpus number at miner start
gpus=1 - you use only 1 gpu for mining
gpus=2 - you use only 2 gpus for mining
gpus=4 - you use only 4 gpus for mining
gpus=1,2,3 - error, wrong syntax

This option is needed to check gpus crash. Script know exact gpus rig value and compare it.
And please give me know with what miner exactly you have this problems.

hi acrefawn

my problem with my rigs amd and castautorun:
gpus=0 - autodetect gpus number at miner start    ----->no: it detect ONLY one card,the gpu 0 not the 1.2.3.4

[Kastlerok]

Shout out to @acrefawn  for the help.  There was absolutely no reason for you to answer my message and spend time helping me, but you did.  In the world of crypto where most things are not legit I am pleased with your level of professionalism and will happily pay for this program my friend. Thank you, very much.

@Andrew_BFSPN

[Acrefawn]

hi

works great with ncidia but i gave problem with amd:

how to put more than 1 card?

gpus=0   =1 card
gpus=4   =1 card
gpus=0,1,2,3 =1 card

what i misse?

on nvidia gpus=0  =5 cards

hi still no solution?

Hello. Sorry but I dont completely understand your question.

gpus=0 - autodetect gpus number at miner start
gpus=1 - you use only 1 gpu for mining
gpus=2 - you use only 2 gpus for mining
gpus=4 - you use only 4 gpus for mining
gpus=1,2,3 - error, wrong syntax

This option is needed to check gpus crash. Script know exact gpus rig value and compare it.
And please give me know with what miner exactly you have this problems.

hi acrefawn

my problem with my rigs amd and castautorun:
gpus=0 - autodetect gpus number at miner start    ----->no: it detect ONLY one card,the gpu 0 not the 1.2.3.4

Hello. CastXMR? Please send me your logfile from miner I need to analyze it Thx!
t.me/acrefawn, or use mega and post here link to it (or into PM)
thx again

Shout out to @acrefawn  for the help.  There was absolutely no reason for you to answer my message and spend time helping me, but you did.  In the world of crypto where most things are not legit I am pleased with your level of professionalism and will happily pay for this program my friend. Thank you, very much.

@Andrew_BFSPN

You can read this thread and you can see that i answered to all questions of each user.
Thx for support.

[dlh1963ua]

Upd script recognize cards amount by counting "Intensity" words. Tested on latest version and it is working fine for me.

Yes, it works good. Thanks!!!

[Tim.Yoshi]

Thank you very much for your work! It's gorgeous! And how about adding XMR-Stak?

[christiano88]

As requested, link for SRBminer:
https://bitcointalk.org/index.php?topic=3167363.0

Cannot find the link to xmrig for now, but SRBminer more popular and important.

What we especially need with SRB is the detection of force close errors, miner just stops and doesn't restart, give a force close window, but the sistem is not frozen. After closing, and reopening, the miner works. Also, 2nd issue, is when miner just stops hashing and showing new stats, but again sistem is not frozen, a windows restart is needed and it works afterwards.

[anotherwave]

Any chance you'll be adding the new EWBF miner to the WatchBot? I tried the old EWBF WatchBot on it and it just kills the process after 5 mins or so until it reboot the system.  Here's the link to the new miner.

https://bitcointalk.org/index.php?topic=4466962.0

[xxxyyyzzz]

Any chance you'll be adding the new EWBF miner to the WatchBot? I tried the old EWBF WatchBot on it and it just kills the process after 5 mins or so until it reboot the system.  Here's the link to the new miner.

https://bitcointalk.org/index.php?topic=4466962.0

same request here...  it restarts due to log change in this new miner, now its date and timestamp at the beginning of every line...
it restarts because it doesn't find my last hashrate  time and he things its more then 15 minutes with no shares...

 i manage to fix it by myself because of a hurry... but  i want to professional to look for it, there are also other things needs to be fixed.. like temperature.. sols/s  etc... basically  log reading is not compatibly now. .


@anotherwave i can send you a quick fix if you are in hurry until author fix it and check everything.

[xxxyyyzzz]

no answer from developer so far... so i fix this by myself..

i have few suggestion also...  

when using ethminer or CC miner console is not displayed because miner itself has no log feature implemented so console prints it into log via command, but its not necessary to do i that way. it can be done, to make console to show progress and to log everything with a small program  so progress can be shown and log can be created for BOT purposes.. just to have this info for future releases maybe..

i fix all this by myself so i have all this working.. showing console progress and longing.  

[sergey1301]

Hello! That's a good idea. From the point of view of the law, it can be done? Acrefawn you can use or is it already built?

[Acrefawn]

Hello all. Sorry for the delay. Last 2 month without PC.
Working on update...
About CCminer and Ethminer if somewho knows how it is possible to enable miner logging (without additional software) please notify me and I will add this feature.
Thank you!

And thank you guys for moneys supporting. ATM I'm still without PC... It burned up

[bullout]

Hey Acrefawn,

I'm using the latest EWBF with the new equihash algos and after 30+ hours get this error loop:

5.07.2018 16:31:30 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:31 CUDA: Device: 1 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:31 CUDA: Device: 2 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:31 WARNING: Looks like GPU0 are stopped. Restarting...
15.07.2018 16:31:31 INFO: GPU0 are restarted.
15.07.2018 16:31:31 WARNING: Looks like GPU1 are stopped. Restarting...
15.07.2018 16:31:31 INFO: GPU1 are restarted.
15.07.2018 16:31:32 WARNING: Looks like GPU2 are stopped. Restarting...
15.07.2018 16:31:32 INFO: GPU2 are restarted.
15.07.2018 16:31:32 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:32 CUDA: Device: 1 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:33 CUDA: Device: 2 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:33 WARNING: Looks like GPU0 are stopped. Restarting...
15.07.2018 16:31:33 INFO: GPU0 are restarted.
15.07.2018 16:31:33 WARNING: Looks like GPU1 are stopped. Restarting...
15.07.2018 16:31:33 INFO: GPU1 are restarted.
15.07.2018 16:31:33 WARNING: Looks like GPU2 are stopped. Restarting...
15.07.2018 16:31:33 INFO: GPU2 are restarted.
15.07.2018 16:31:34 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:34 CUDA: Device: 1 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:34 CUDA: Device: 2 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
15.07.2018 16:31:34 WARNING: Looks like GPU0 are stopped. Restarting...
15.07.2018 16:31:34 INFO: GPU0 are restarted.


This loop goes on indefinitely until the miner is manually restarted. The farmbot closes at some point and isn't available to restart the miner. A simple miner restart fixes this issue. Hope this helps when you work on support for the new EWBF. Thanks!

[BTalarmus]

Dear Acrefawn! Your watchbot is almost perfect but there is some problem when I’m trying to launch 2 miners at once in autorun. I’m using Claymore in mixed rig with RX480 and R9 290. Last one has problems to be undervolted simultaneously with others so I use two processes of Claymore at once. Your watchbot kill second process. Is it possible to switch off this option?

[zimpixa_miner]

What I found already concerning ewbf 0.4

Message output was changed, there is timestamp in front of every message

To override false positive last share timeout I've changed 659 line to

Code:

	FOR /F "tokens=3 delims=: " %%A IN ('findstr.exe /R /C:".*INFO.* share .*" %log%') DO SET lastsharemin=1%%A

To properly find error messages Ive changed every entry of %lasterror% to !lasterror!
So far it seems working


Every line number was checked on version 2.0

[Acrefawn]

## Today version 2.0.3 released!

☄️ Cпиcoк измeнeний - 2.0.2-2.0.3
- Дoбaвлeнa oпция для oтключeния пpoвepки тeмпepaтyp в цeлoм.
- Дoбaвлeнa пoддepжкa Eth peжимa для Bminer.
- Иcпpaвлeнa oшибкa лoжнoгo пepeключeния пyлoв.
- Дoбaвлeнa oпция для oтключeния лишниx yвeдoмлeний.
- Иcпpaвлeния для ewbf мaйнepa нoвoй вepcии, дoбaвлeнa пoддepжкa, измeнeны пepeмeнныe. Пoкa c нoвoй вepcиeй ewbf мoгyт быть пpoблeмы, ждy вaшиx oтчeтoв.
- Пoпыткa иcпpaвить пpoблeмy oтoбpaжeния в Ethrminer. Heт вoзмoжнocти пpoвepить, y мeня oн нe paбoтaeт.
- Дoбaвлeнa oшибкa для Phoenix мaйнepa "unable to get fan speed".
- Иcпpaвлeнo oтключeниe TeamViewer пpи кpитичecкиx oшибкax.
- Дpyгиe мeлкиe иcпpaвлeния.

☄️ Changelog - 2.0.2-2.0.3
- Added option to turn off the temperature check as a whole.
- Added support for Eth mode for Bminer.
- Fixed false pool switching error.
- Added option to disable unnecessary notifications.
- Fixes for new version ewbf, added support, changed variables. While there may be problems with the new version of ewbf, I'm waiting for your reports.
- Attempt to fix the display problem in Ethrminer. There is no way to check, it does not work for me.
- An error has been added for the Phoenix miner "unable to get fan speed".
- Fixed disabled TeamViewer for critical errors.
- Other minor fixes.

**Ewbf [Equihash]** - _Ewbfautorun.bat_
**Dstm [Equihash]** - _Dstmautorun.bat_
**Bminer [Equihash]** - _Bmnrautorun.bat_
**Claymore [Equihash]** - _ClayZECautorun.bat_
**Claymore [CryptoNote]** - _ClayXMRautorun.bat_
**Claymore [NeoScrypt]** - _ClayNSautorun.bat_
**Claymore [Ethash]** - _ClayETHautorun.bat_
**Ethminer [Ethash]** - _Ethrautorun.bat_
**Ccminer [Multialgo]** - _CCautorun.bat_
**Cast-XMR [CryptoNote]** - _Castautorun.bat_
**Phoenix [Ethash]** - _Phnxautorun.bat_

Premium price is **20$** eq in any cryptocurrency from donations list.

[zimpixa_miner]

EWBF bug report
If those messages are detected in log watchbot crashes

Code:

20.07.2018 08:19:21 CUDA: Device: 0 Thread exited with message: "all CUDA-capable devices are busy or unavailable"
02.08.2018 15:33:25 CUDA: Device: 1 Thread exited with message: "an illegal memory access was encountered"

Error written in watchbot log

Code:

[2018-08-02][15:36:27] CUDA-capable

It happens on every detected line that contains "

Code:

>> %~n0.log ECHO [%Date%][%Time:~-11,8%] reports:%reports% 3:%~3 Chat:%chatid%
prints
reports:0 3:02.08.2018 15:33:25 CUDA: Device: 1 Thread exited with message: "an Chat:0

When I added REM to lines 796 and 797 watchbot works fine
I've tried to edit those lines, to just write to log simple message, but it also didn't work

Also I see this version is still missing current server and queue number

[gettilee]

Would love to see support for xmrig as well!

[NubyS]

hey,
so i've had a problem with log file or command.

I think it's bugged, since there's no way to use proper options.

if i use "-log 1 -logfile miner.log -logdir Logs"

it will ALLWAYS say it's an error, that there's no miner.log file for example. So i will add miner.log file in the folder of .bat file, then miner will say it moved the miner.log file to Logs and rename it, then it will say AGAIN, that miner.log is missing and that i should use "-log 1 -logfile miner.log" command, so o matter what you do, you can not win, so the only option is to just not use the -logdir file and have logs in the .bat folder.

[Acrefawn]

hey,
so i've had a problem with log file or command.

I think it's bugged, since there's no way to use proper options.

if i use "-log 1 -logfile miner.log -logdir Logs"

it will ALLWAYS say it's an error, that there's no miner.log file for example. So i will add miner.log file in the folder of .bat file, then miner will say it moved the miner.log file to Logs and rename it, then it will say AGAIN, that miner.log is missing and that i should use "-log 1 -logfile miner.log" command, so o matter what you do, you can not win, so the only option is to just not use the -logdir file and have logs in the .bat folder.

Hello. You dont need to use -logdir option. Your logs will be moved to Logs folder created by script. No need to worry about this.

[Acrefawn]

☄️ Cпиcoк измeнeний - 2.0.5-2.0.6

Иcпpaвлeнa oшибкa c "+" в кoмaндe /config.
Иcпpaвлeнo oтoбpaжeниe cкopocти и тeмпepaтypы в Eth miner.
Иcпpaвлeнo oтoбpaжeниe нaзвaния cepвepa в Eth miner.
Иcпpaвлeнa oшибкa двoйнoгo пoдcчeтa кoличecтвa видeoкapт в Phoenix miner.
Дpyгиe мeлкиe иcпpaвлeния.
Ceйчac вeдy paзpaбoткy cкpиптa пoд XMRrig и SRBminer. Oбнoвил вce cкpипты к aктyaльным вepcиям мaйнepoв. Пoтoмy пepeд тeм кaк ycтaнoвить вepcию cкpиптa 2.0.5/2.0.6 yбeдитecь чтo вы oбнoвили мaйнep к пocлeднeй вepcии.

☄️ Changelog - 2.0.5-2.0.6

Fixed bug with "+" in / config command.
Fixed display of speed and temperature in Eth miner.
Fixed display of server name in Eth miner.
Fixed double counting the number of video cards in Phoenix miner.
Other minor fixes.
Now I am developing a script for XMRrig and SRBminer. Updated all the scripts to the current versions of the miners. Therefore, before installing the version of the script 2.0.5 / 2.0.6, make sure that you update the miner to the latest version.

Ewbf [Equihash] - Ewbfautorun.bat
Dstm [Equihash] - Dstmautorun.bat
Bminer [Equihash] - Bmnrautorun.bat
Claymore [Equihash] - ClayZECautorun.bat
Claymore [CryptoNote] - ClayXMRautorun.bat
Claymore [NeoScrypt] - ClayNSautorun.bat
Claymore [Ethash] - ClayETHautorun.bat
Ethminer [Ethash] - Ethrautorun.bat
Ccminer [Multialgo] - CCautorun.bat
Cast-XMR [CryptoNote] - Castautorun.bat
Phoenix [Ethash] - Phnxautorun.bat

Premium price is 20$ eq in any cryptocurrency from donations list.