[ANN][MASTERNODE] Monoeci - A cryptocurrency for Monaco

[miniliano]

I have been running a MN with no problems for the last 1.5-2 months, but now, starting yesterday, it said watchdog expired in the masternode tab.  I restarted the MN from the windows wallet, it says pre enabled and when I went back into the wallet, it said enabled.    Now today it says restart required, so I restarted it again and now it says PRE_ENABLED.      Is their something I need to update that has suddenly started causing this because it was working flawlessless for over a month and never had to restart.     I know there have been a lot of changes and appears to be a newer wallet on the Github that what I am running?

Also, when I look at the MN list, it shows nearly half the masternodes say NEW_START_REQUIRED or WATCHDOG_EXPIRED on them also so there must be an issue that came up.    If anyone knows anything please let us know!

Thanks!

I did this question 2 days a go. No answers. This forum is for support or just for spam pool and masternode hosting (ads) where is the comunity.?

nevermind.. or i get too angry:
Did someone get not payd by masternodes today, about intell bug and relative restart of VM's???

[1714919653]

1714919653

[1714919653]

1714919653

[1714919653]

1714919653

[1714919653]

1714919653

[1714919653]

1714919653

[miniliano]

Any one else getting their payments from mining, it's been couple of days and I usually get paid out everyday but but I haven't received anything even though prohashing said my payments went through.  I created another address on my wallet and used that on prohashing but still not getting paid. 

Is this happening to others?

Dude u are ultra noob. So is not easy to let u understand.
If u are mining on prohashing u have not to come here to complain for not receiving payment, u have to contact prohashing. >MY OPINION is that u have not received ur payout because u have not reached the payout treshold due to decreased x11 returns of last 2 days. u can see ur trshold in ph.
If u want xmcc u should mine on multiport when the xmcc diff is too hight and mine on xmcc solo pool when diff is good; but how i told u first line ur too noob for this. please no offense. u just have to learn a lot of stuff.
prohashing do this: mine the most profittable coin and change it for xmcc( in your case) but they take 4.99% FEE, that reason u should do alone.

[Wananavu99]

Any one else getting their payments from mining, it's been couple of days and I usually get paid out everyday but but I haven't received anything even though prohashing said my payments went through.  I created another address on my wallet and used that on prohashing but still not getting paid.  

Is this happening to others?

Dude u are ultra noob. So is not easy to let u understand.
If u are mining on prohashing u have not to come here to complain for not receiving payment, u have to contact prohashing. >MY OPINION is that u have not received ur payout because u have not reached the payout treshold due to decreased x11 returns of last 2 days. u can see ur trshold in ph.
If u want xmcc u should mine on multiport when the xmcc diff is too hight and mine on xmcc solo pool when diff is good; but how i told u first line ur too noob for this. please no offense. u just have to learn a lot of stuff.
prohashing do this: mine the most profittable coin and change it for xmcc( in your case) but they take 4.99% FEE, that reason u should do alone.

No the payment went through the chain, but I never got it in my wallet.  I was experiencing the same thing with BZL and they fixed it, so I'm wondering if this is an issue with XMCC and not prohashing.  

It's been two days and nada.  I know about their fees and all, but I live in the US and it's easier for me to use them for tax purposes, since I can use an estimation of electricity used.  The fees just come off my taxes.  

btw - what the heck is a "noob". 

[miniliano]

How save remove earning from masternodes?

[gold.oracle]

Answering the two guys ahead, your MN needs update ! as the core wallet did.

My question is : can we have a new tutorial on how to set up a MN, like the one before was really good

Thanks!

[moinuddin14]

The starting point of the Monaco project is very good, to build a country's payment service, and I think that in the future, the cryptocurrency will become a real payment method, and its advantages are very obvious.In addition, I want to know how much is masternode's daily revenue?

now one payment (2 xmcc) per node in 47 hours

So in other words 1 coin per day?  ( 2 coins in 48 = 1 coin in 24 )
1 coin per 24 hours.
$3.54 per day?

You can also check this page for a rough estimation of Daily income:
https://masternodes.online/currencies/XMCC/

But as previously mentioned the reward will increase very soon at block 120000.
We are now at block 119750. 2 minutes per block on average so that would be within just a few hours.

The reward should be around 130000. Did they change the plan?

Yes I read it first somewhere in this thread but it is also mentioned on twitter:
https://twitter.com/monoeci_monaco/status/943758915124236288?ref_src=twsrc%5Etfw&ref_url=https%3A%2F%2Fcoinmarketcap.com%2Fcurrencies%2Fmonacocoin%2F

But in reality there seem to be problems? Looking at block Explorer the rewards are still split 8/2 and many rewards are not split at all (only one receiver that get 10 XMCC)?
Maybe we can get an explanation? Somebody stealing rewards from the masternodes?

Edit: I got this explanation on discord:
https://steemit.com/bitcoin/@onlimono/increased-xmcc-master-node-reward-or-xmcc

I guess miners want as much as possible and don't update until they are forced. Still does not explain the 10 XMCC rewards to miner only. Hopefully cryptopia will update. Why didn't they do it earlier, mandatory update was annunced weeks ago?

I see now the rewards are split between Miners and MN consistently. Are you still observing any issues from your end?

[moinuddin14]

Hi, i have 2 masternodes working.

 Im worry about this annuncement:      FS#1116 - [Scaleway] Emergency security update required on all hypervisors

"" Dear Cloud Rider,

You have one or more cloud servers located on an hypervisor requiring an important security update.

To perform this security update, we need to reboot your server. A maintenance window has been scheduled between the 01/04/18, starting at 7am UTC and the 01/06/18, ending at 7am UTC


During this maintenance, your server will be unavailable for a few minutes during the reboot phase.
We will reboot cluster one at a time to limit downtime on your infrastructure.

We sincerely apologize for the short delay of this notice, we believe security and privacy is crucial on cloud platforms and we decided today to trade some availability in favor of security.

You can checkout our blog to get more information: https://blog.online.net/2018/01/03/important-note-about-the-security-flaw-impacting-arm-intel-hardware/""

they are fixing the intel vulnerability and they will reboot masternodes, after that what must i do to repristinate the masternode to normal activities? run monoecid from vps and start node from wallet? or?

tnx for answers

Don't worry, after the reboot, just restart the monoecd, and you should be good. Also if the MN is running fine or not you can check with masternodes mnsync status

[moinuddin14]

I have been running a MN with no problems for the last 1.5-2 months, but now, starting yesterday, it said watchdog expired in the masternode tab.  I restarted the MN from the windows wallet, it says pre enabled and when I went back into the wallet, it said enabled.    Now today it says restart required, so I restarted it again and now it says PRE_ENABLED.      Is their something I need to update that has suddenly started causing this because it was working flawlessless for over a month and never had to restart.     I know there have been a lot of changes and appears to be a newer wallet on the Github that what I am running?

Also, when I look at the MN list, it shows nearly half the masternodes say NEW_START_REQUIRED or WATCHDOG_EXPIRED on them also so there must be an issue that came up.    If anyone knows anything please let us know!

Thanks!

These are sentinel related issues. You need to check your sentinel in your VPS server. Also check if you have set up crontab, if not that is one source that keeps giving WATCHDOG_EXPIRED

[moinuddin14]

Any one else getting their payments from mining, it's been couple of days and I usually get paid out everyday but but I haven't received anything even though prohashing said my payments went through.  I created another address on my wallet and used that on prohashing but still not getting paid. 

Is this happening to others?

See if you are still on the old chain (Monacocoin Chain). If you are then you may need to get onto new Monoeci chain. Heard from some Masternode members they were still getting 2 XMCC per block, which could be the exact issue as well.

[miniliano]

How save remove earning from masternodes?

Guys can i windrawal the earnings from wallet masternode or i broke something?

[Wananavu99]

Any one else getting their payments from mining, it's been couple of days and I usually get paid out everyday but but I haven't received anything even though prohashing said my payments went through.  I created another address on my wallet and used that on prohashing but still not getting paid.  

Is this happening to others?

See if you are still on the old chain (Monacocoin Chain). If you are then you may need to get onto new Monoeci chain. Heard from some Masternode members they were still getting 2 XMCC per block, which could be the exact issue as well.

Yup, you're absolutely right, I'm still on the old chain...do you know how I can get those coins paid to my wallet?  Is there a support team where I can send this inquiry to?  

Edit:  Contacted prohashing, hopefully they can point me in the right direction.  The wait time is over a week, but I'm on dutch pool now.  Anyone else know of a better pool? 

[Wananavu99]

K, got an answer from prohashing, the XMCC network is in " ...in error mode".  The devs need to "...list the new one" for prohashing to use.  Not sure if I can get paid my coins due to the change.  Well there goes 20 coins for two days. 

[blc]

we need bittrex

Yeah, I am running 7 masternodes, about to be 8, but struggling to retain faith that this is going anywhere anytime soon.

Well it looks like the increased rewards have really kicked it along, but seems rewards are every second day instead of every day, so really only x1.25 compared to earlier, but price is up. Let us see how it lasts.

[ronnylov]

How save remove earning from masternodes?

Guys can i windrawal the earnings from wallet masternode or i broke something?

Yes you can withdraw the amount above 1000 XMC but if you withdraw more the masternode stops working.
Personally I am thinking of saving the rewards so I can buy a second masternode when I have earned 1000 XMCC (early 2019).
But I had to withdraw some two weeks ago and it worked without problem as long I kept 1000 XMCC.

[miniliano]

How save remove earning from masternodes?

Guys can i windrawal the earnings from wallet masternode or i broke something?

Yes you can withdraw the amount above 1000 XMC but if you withdraw more the masternode stops working.
Personally I am thinking of saving the rewards so I can buy a second masternode when I have earned 1000 XMCC (early 2019).
But I had to withdraw some two weeks ago and it worked without problem as long I kept 1000 XMCC.

tnx a lot for answer.
I did masternodes after the upgrade i got always 5 xmcc, but how u say the time betwen payment is not stable, currently increasing. 48 after cratinon first pay; than 26 hours second pay; 30 hours for third. Yeah price rise and also reward but im a little worry of this increasing time . Why is icreasing? Ours reward are bounded  how many block are mined/day?

[Wananavu99]

Hello, anyone knows if i can point my antminer d3 to coinexchange xmcc wallet? On coinexchange it says that the wallet is in maintanance, so not sure if coins will get there. Anyone is mining direct to exchange wallet?

FYI - Don't mine directly to your exchange wallet, here's what Cryptopia says "WARNING! Please do not mine directly to your Cryptopia addresses, We do not support generated transactions from pools like P2Pool etc."

I'm assuming it's the same for most if not all exchanges. 

[sciwolf]

Hi all, can anyone tell my why i am not getting any coins in the wallet? Mining constantly for 24 hours already, nothing in my wallet, pool says i get enough shares, no transactions are being found in block explorer...
I'm mining to the official wallet, using http://miningpool.thruhere.net shoud've got plenty of coins already.... but still all empty.

[gold.oracle]

Hi, trying to install a masternode i'm stuck here :

Code:

monacouser@Monacoeci:~$ monoecid: error while loading shared libraries: libboost_system.so.1.54.0: cannot open shared object file: No such file or directory

Any help greatly appreciated

[jki123]

Hi, trying to install a masternode i'm stuck here :

Code:

monacouser@Monacoeci:~$ monoecid: error while loading shared libraries: libboost_system.so.1.54.0: cannot open shared object file: No such file or directory

Any help greatly appreciated

Hi Gold.Oracle,
probably you have to compile libboost by your own and install it on your system. It depends on the Linux/Debian-version you are using.But don'n worry - there are good explanations in the web. 30' should do it ... ;-)

[mikensen]

In my opinion this coin is worth at least x3 of current value at the moment. Team is active with real project and talented people. It deserves much more then rank around 400. I think we will see this coin rise under top 200 soon.