Offical launch of PhenixCoin.com

[diegodos]

there are a list here https://bitcointalk.org/index.php?topic=213214.0


i use pxc.allpoolz.com i dont have issue

[1714792145]

1714792145

[1714792145]

1714792145

[cryptohunter]

there are a list here https://bitcointalk.org/index.php?topic=213214.0


i use pxc.allpoolz.com i dont have issue

this pool needs to stop registrations, the coin is very vulnerable at this level that pool had way over 51% of hash.

[MaGNeT]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

[daytrader420]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

I'm pretty sure its less than that.

Difficulty is 2.22 (last i checked).

It should take only about 4 hrs to find a block with 600 kh/s at current difficulty.


SOLO mine away !

[MinerLT]

I bet we will see this coin on bter.com  even better on mcxnow.com 

[cryptohunter]

POKER CRASHED AGAIN GRRRRR what is wrong why does it keep crashing?

[daytrader420]

I bet we will see this coin on bter.com  even better on mcxnow.com 

Better than that, I'll bet you see this coin have a longer lifespan than every other scrypt-alt since Litecoin.

[nulo0b]

POKER CRASHED AGAIN GRRRRR what is wrong why does it keep crashing?

Did you not played the whole match out?

I think its get blocked by the new one that pops...

[cryptohunter]

POKER CRASHED AGAIN GRRRRR what is wrong why does it keep crashing?

Did you not played the whole match out?

I think its get blocked by the new one that pops...

no , so annoying to play up all that time then it crashes

they need to fix that asap, it's stupid the game gets destroyed because a new one starts also just freezes up .

[nulo0b]

Arggh, thats bad tbh...

Now more and more peeps,  find the way to the pokersite

[TheFuneral]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

I'm pretty sure its less than that.

Difficulty is 2.22 (last i checked).

It should take only about 4 hrs to find a block with 600 kh/s at current difficulty.


SOLO mine away !

How do I tell if I have set it up correctly without waiting for an entirely new block? cgminer currently says

New Block Detected on network. Does that mean it's workign correctly? How will it know where to payout?

I assume 127.0.0.1 is your computers localhost and we should use what we get from cmd>ipconfig instead?

[YaCoinYeah]

Wish iamatrix and John would wake up and start posting. They have a lot to say

[nulo0b]

you know something more?

[Scooby903]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

I'm pretty sure its less than that.

Difficulty is 2.22 (last i checked).

It should take only about 4 hrs to find a block with 600 kh/s at current difficulty.


SOLO mine away !

Is there a dummies guide to setting up solominig?

Everytime I try to start the server it tells me I need a

rpcpassword

even though I have one set in my .conf file;

#
listen=1
upnp=1
rpcuser=YourUserName
rpcpassword=YourPassword
rpcallowip=*
rpcport=9554
rpcconnect=*
daemon=1
server=1
gen=0
#

What am I doing wrong?

I had some issues with this as well...I was putting the .conf file in with the qt.exe and it needs to be in the roaming\appdata folder...

[cryptohunter]

Wish iamatrix and John would wake up and start posting. They have a lot to say

Tell us ? what do you mean.?

[MrSike]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

I'm pretty sure its less than that.

Difficulty is 2.22 (last i checked).

It should take only about 4 hrs to find a block with 600 kh/s at current difficulty.


SOLO mine away !

Is there a dummies guide to setting up solominig?

Everytime I try to start the server it tells me I need a

rpcpassword

even though I have one set in my .conf file;

#
listen=1
upnp=1
rpcuser=YourUserName
rpcpassword=YourPassword
rpcallowip=*
rpcport=9554
rpcconnect=*
daemon=1
server=1
gen=0
#

What am I doing wrong?

Often that error pops up when the file is saved as .conf.txt, make sure it's just .conf

[TheFuneral]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

I'm pretty sure its less than that.

Difficulty is 2.22 (last i checked).

It should take only about 4 hrs to find a block with 600 kh/s at current difficulty.


SOLO mine away !

Is there a dummies guide to setting up solominig?

Everytime I try to start the server it tells me I need a

rpcpassword

even though I have one set in my .conf file;

#
listen=1
upnp=1
rpcuser=YourUserName
rpcpassword=YourPassword
rpcallowip=*
rpcport=9554
rpcconnect=*
daemon=1
server=1
gen=0
#

What am I doing wrong?

Often that error pops up when the file is saved as .conf.txt, make sure it's just .conf

How do I tell if I have set it up correctly without waiting for an entirely new block? cgminer currently says

New Block Detected on network. Does that mean it's workign correctly? How will it know where to payout?

I assume 127.0.0.1 is your computers localhost and we should use what we get from cmd>ipconfig instead?

[MrSike]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

I'm pretty sure its less than that.

Difficulty is 2.22 (last i checked).

It should take only about 4 hrs to find a block with 600 kh/s at current difficulty.


SOLO mine away !

Is there a dummies guide to setting up solominig?

Everytime I try to start the server it tells me I need a

rpcpassword

even though I have one set in my .conf file;

#
listen=1
upnp=1
rpcuser=YourUserName
rpcpassword=YourPassword
rpcallowip=*
rpcport=9554
rpcconnect=*
daemon=1
server=1
gen=0
#

What am I doing wrong?

Often that error pops up when the file is saved as .conf.txt, make sure it's just .conf

How do I tell if I have set it up correctly without waiting for an entirely new block? cgminer currently says

New Block Detected on network. Does that mean it's workign correctly? How will it know where to payout?

I assume 127.0.0.1 is your computers localhost and we should use what we get from cmd>ipconfig instead?

"New block detected" that means another miner found the block, so you receive no reward.
127.0.0.1 is good.
Seems like you are solo mining just fine, once you solve your first block it is very exciting!

Edit: It will know where to pay out because you should be using your wallet as a server.  It will automatically pay out to an address in it when a block is solved.

[JohnCar]

Wish iamatrix and John would wake up and start posting. They have a lot to say

I am here and Mike is looking at code for poker site whats up?

[TheFuneral]

If you have >1000 Khash/s just keep solo mining.

You still find an average of 9 blocks in 24 hours at current difficulty with 1000 Khash/s

No pool fees, no DDOS, no pool crashes, etc.

Just went back on mining solo again

I'm pretty sure its less than that.

Difficulty is 2.22 (last i checked).

It should take only about 4 hrs to find a block with 600 kh/s at current difficulty.


SOLO mine away !

Is there a dummies guide to setting up solominig?

Everytime I try to start the server it tells me I need a

rpcpassword

even though I have one set in my .conf file;

#
listen=1
upnp=1
rpcuser=YourUserName
rpcpassword=YourPassword
rpcallowip=*
rpcport=9554
rpcconnect=*
daemon=1
server=1
gen=0
#

What am I doing wrong?

Often that error pops up when the file is saved as .conf.txt, make sure it's just .conf

How do I tell if I have set it up correctly without waiting for an entirely new block? cgminer currently says

New Block Detected on network. Does that mean it's workign correctly? How will it know where to payout?

I assume 127.0.0.1 is your computers localhost and we should use what we get from cmd>ipconfig instead?

"New block detected" that means another miner found the block, so you receive no reward.
127.0.0.1 is good.
Seems like you are solo mining just fine, once you solve your first block it is very exciting!

how will I know and how long should I expect to wait if I have 2500Kh/s ?