TechnoBit Eastern Europe, BG HEX16A 7 GH/s/Плaтки имoнтaж нa Aвaлoн чип

[loshia]

 

You are a real hacker dude. By the way did you get your hex already. I would like to know if all is good with tp-link.

10X

No, my hex still on speedy office because of document problem. But many said it's work perfectly & super stable 

Really?

I am glad to hear it 

[Zich]

Really?

I am glad to hear it 

Yup, but router only for mining purpose only. Many feature should not enabled 

[nitrox]

every think is OK. now
but i somehow do not find wifi config in there.

[Zich]

every think is OK. now
but i somehow do not find wifi config in there.

Do not enable wifi because it's can cause problem

[nitrox]

ok.

[nitrox]

BTW my HEX16A still missing to.
but friend of mine get his HEX16 last week.
I am very disappointed with the quality of service.
I live in Bulgaria, I paid extra for delivery ..... and still waiting.

[loshia]

every think is OK. now
but i somehow do not find wifi config in there.

You will never find it.
WiFi drivers are missing - not compiled and this is done on purpose
No matter how hard are you tying all hex images are wired only

[Zich]

Awwwww, 2 HEX16A only can pay shipping cost with current difficulty 

[chaoztc]

thanks marto,
you did a great work in regard of overclocking!

hex16 running at 450MHz (52°C on asic, ~90W, 1350mV, 7GH, 1-2% HW erorrs) quite well,
500MHz works but a little bit hot (63°C on asic, ~110W, 1460mV, 7,6GH, 2-3% HW errors).
510MHz (1440mV) works, but hw errors go up.

1500mv has not worked. try undervolting the suggestions from:
https://bitcointalk.org/index.php?topic=303538.0


is there a temp sensor or at least a overheat protection at the board?
(if not - I will build something external)

if you see problems with more than 1 hex16a on cgminer startup - get a better hub! specially "genesis" usb hub chip seems to be bad.
symptomes: after usb device reset by cgminer it never comes back, in dmesg you see many usb errors
I use a raspberry pi as with cgminer 3.6.6.

try to use a power-cable for each hex16, I had quite hot cables when running 3 of them at a wire; also hw errors goes up because of voltage drop.
I use a corsair 650tx power supply for 5 miners, connected to the 2 pcie plugs.


used power connector from an old mainboard:
http://upload.confusion.at/bt/power.jpg

mounted the hex16a like a tunnel in a old pc case; one fan on each side, so one fan could die
http://upload.confusion.at/bt/case.jpg

[Zich]

Hi, chaotz. I remember marto said that HEX 16 can be chained to run off one USB host.

[Zich]

New TPLINK TL-MR3020 image just added:

Link: Factory
Link: SysUpgrade


What news:

Code:

0.0.5:

* cgminer  updated      to 3.6.4 rev 273b04be62a69b2fcfa95790b99822a0bcfd8e75
* cgminer patch to cgminer 3.6.4 rev 273b04be62a69b2fcfa95790b99822a0bcfd8e75.patch 
* openwrt updated to r38461
* add cgminer monitor script
* stay in sync with official cgminer git and build fresh openwrt images
* add auto frequency adjustment support avalon-auto style
* add configuration options (voltage and clock) per board based on HEX16A serial number

  Best results in terms of stability and clocking are observed at 1460mV core voltage + 480 MHz Clock

[Zich]

Marto, speedy said they still not receive the proforma invoice.
What exactly happen here 
Now tell me how are you gonna do about this?

[nitrox]

don't worry Zich,
it take a week to get my HEX16A via speedy.bg, and i localise in same country as Marto.
don't be rush , take a coffee and chill a little if you can.
that is my advice, but you do what you want.
Regards.

[Zich]

don't worry Zich,
it take a week to get my HEX16A via speedy.bg, and i localise in same country as Marto.
don't be rush , take a coffee and chill a little if you can.
that is my advice, but you do what you want.
Regards.

No, speedy.bg refuse to send my parcel from bulgaria without low cost proforma invoice because may country is not part of EU.
My parcel already in their office from October 15. Speedy.bg keep asking for low cost proforma invoice.
This is ridiculous, but i think speedy mine BTC with my HEX16  

Hello,

I’m very sorry for this situation, but the parcel cannot leave Bulgaria without the Proforma Invoice.
As soon as we receive it the parcel will be transferred.
 
Best regards,
 

Magdalena Shishkova
International clients specialist
Speedy JSC
0 7001 8001
www.speedy.bg

[loshia]

don't worry Zich,
it take a week to get my HEX16A via speedy.bg, and i localise in same country as Marto.
don't be rush , take a coffee and chill a little if you can.
that is my advice, but you do what you want.
Regards.

What is the point of your comment nitrox?
Just trolling?
Or you wanna make Zich happy?
I am wandering if you paid for shipping at all? Oh i forgot there is a free lunch a and it supposed to be free? I am damn sure that speedy is taking one business day for domestic deliveries but most probably you live in a very secret place. A Village in the mountains?

Please share something valuable here for instance :

I followed 2GOOD how to and it works great or I donated 0 BTC to 2GOOD  because he spent his valuable time for jerks like me. Or at least i am poor guy because i live in Bulgaria but thank you 2GOOD for explaining me how to use my HEX16!!!!!!!!

[loshia]

Hi, chaotz. I remember marto said that HEX 16 can be chained to run off one USB host.

Hey,

No chaining is available for the moment as far as i know.

If you have more than one board i will recommend you to use this USB HUB

http://www.amazon.de/dp/B00602C91U/ref=pe_386171_38075861_TE_item

Bus 001 Device 002: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB





it works up to 6 Hexes (stable and more) (Terminus Technology Inc. FE 2.1 7-port Hub - THAT IS A REAL CHIP!) + TP-link. Make sure that hub is powered from PSU 5V do not use original hub EXTERNAL power supply/adapter

As a rule of thumb use common ground for your TP-LINK, HEX16 and USB Hub if any from PSU Which means that you have to throw away TP-Link power adapter also. Power up tplink from HUB 7,8,9,10 port OK?
What i do is: 750-800W PSU to power HUB+HEX16 - 6-7 boards depending of overclocking and 12V PSU RAIL +TP-Link and it works great



 

[Zich]

Hey,

No chaining is available for the moment as far as i know.

Thanks for the info loshia
But i guess i will never see my 2 x HEX16

[loshia]

Hey,

No chaining is available for the moment as far as i know.

Thanks for the info loshia
But i guess i will never see my 2 x HEX16

I feel bad for you dude.....
  Because you are knowledgeable person and you know what to do which means that you will enjoy them working ....

[Zich]

I feel bad for you dude.....
  Because you are knowledgeable person and you know what to do which means that you will enjoy them working ....

Thanks dude, this is the reality that i must accept.

[nitrox]

What is the point of your comment nitrox?
Just trolling?
Or you wanna make Zich happy?
I am wandering if you paid for shipping at all? Oh i forgot there is a free lunch a and it supposed to be free? I am damn sure that speedy is taking one business day for domestic deliveries but most probably you live in a very secret place. A Village in the mountains?

Please share something valuable here for instance :

I followed 2GOOD how to and it works great or I donated 0 BTC to 2GOOD  because he spent his valuable time for jerks like me. Or at least i am poor guy because i live in Bulgaria but thank you 2GOOD for explaining me how to use my HEX16!!!!!!!!

1. just to come down.
2. yes i pay on double prise.
and
3. you trolling now, do not poke where you do not belong.

man has an thoughts and can make decisions alone.
you, his lawyer?

last post on this theme.
live in peace, and let others live in peace