TechnoBit Eastern Europe, BG HEX16A 7 GH/s/Плaтки имoнтaж нa Aвaлoн чип

[loshia]

New TP-LINK TL-MR3020 image & cgminer patch is available.

Link : 0.1.0

0.1.0:

* cgminer Bugfix – detecting HEX boards + memory corruption
* cgminer NEW – Auto detect miners in case of usb errors during detection --set_default_to_a, --set_default_to_b and --set_default_to_c.
   The default is hexA – all boards will be detected as Avalon1
* cgminer updated to 3.8.3 rev 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f
* cgminer patch to cgminer 3.8.3 rev 7ddb94d6964f2451d2e76f70b069dfdf2b3d4d6f.patch
- various code cleanup and optimization needs to be done
* cgminer pending work to implement nanofury support
* openwrt Web – added config for Auto detect option
* openwrt updated to r38917

todo

* finish cgminer nanofury support
* add cgminer monitor script - done
* stay in sync with official cgminer git and build fresh openwrt images - synced
* add auto frequency adjustment support avalon-auto style - canceled
* add configuration options (voltage and clock) per board based on HEX16A serial number - canceled

HEX16A(Avalon1): Best results 7.4-7.7 Gh/s (16 chips) in terms of stability and clocking are observed at 1460mV core voltage + 480 MHz Clock.

HEX16B(Bitfury): Best results 44.5-45 Gh/s (16 chips) in terms of stability and clocking are observed at 900mV core voltage + 540 Clock.
Do not go above 540 it is not working!

HEX16C(Avalon2): To be tested with 10 chips - 1100mV core voltage + 1500 MHz Clock.

And no more OFF boards or at least less often 

[Jeffrey]

Any news on when you'll be getting chips (avalon or bitfury) again and thus able to sell fully working products again?

[Zich]

And no more OFF boards or at least less often  

Really hope nanofury to work on TL-MR3020 or Pi  
Marto, i believe you & your team can make it work.

[cy8ex]

did you have any news when my order will be ready ?
I'm waiting since 2013-09-20 and getting no reply from your customer support. 
Order Reference is TEGHAXVCJ

[marto74]

did you have any news when my order will be ready ?
I'm waiting since 2013-09-20 and getting no reply from your customer support. 
Order Reference is TEGHAXVCJ

To be ready for ship Monday.
You did not paid for transport
Please organize it

[pidge]

did you have any news when my order will be ready ?
I'm waiting since 2013-09-20 and getting no reply from your customer support. 
Order Reference is TEGHAXVCJ

To be ready for ship Monday.
You did not paid for transport
Please organize it

I would dearly love to arrange to pay for the shipping for my order FSTXTMWYW placed on 2013-11-08 12:59:29, but I've not had a reply to my three e-mails sent to office@technobit.eu on Friday, 8 Nov 2013 11:02:23 UTC, Sat, 9 Nov 2013 11:27:03 +1300, and Thu, 28 Nov 2013 23:00:37 +1300, and the PM sent to to marto74 on November 20, 2013, 10:26:30 AM, but hey, you must be busy! :|

[Jeffrey]

Hi Marto,

I have 3 orders with you:
LKUPFIGKK
JTVEEGAXQ
OSPRSHZDH

(all made by me, same shipping address, same payment method)

Do you think you can combine these orders and refund one or more shipping costs in the form of a voucher? (for my next order) Of course only if it doesn't delay the first shipment.
I've also asked this by mail about a week ago but no reply yet.

Thanks

[Zich]

Hi marto,

Could you publish cgminer patch 3.8.2 rev 0ed1828bd47282218c2bb130fd03737ed2c51a5e.patch ?

Thanks  

[adib]

Can i have an update on order?
reference INBMPYJUJ.
I was told end of next week, and its the week after that.

Thank you.

[MagicMan187]

Hi Marto,

I have the following orders with you (through technobit.eu)

GRDDAZGHW
HLNTCMFXA

Can you provide a status update on these?, I've sent numerous emails to office@technobit.eu with no reply.
I didn't pay for shipping for one of these orders (GRDDAZGHW), (I was hoping to have it consolidated into one order), If this is an issue, please let me know how I can pay for the shipping cost after I have made the order.

I received an automated email stating one of my package's is "In transit" and the tracking url is below, and there is a blank line with no text or URL below that line. I can see a tracking number in my order details, but cannot find a link to view the status anywhere, I tried googling it and the carrier says it's invalid?

Can you shed any light on this and the status/tracking info of these orders?

Thanks

[blitzwilli1]

Can i have an update on order?
reference NLTALAEYM.

[itmon]

could join the two orders: TNYDUBSHI and JSOFRXHZQ in one, get the shipping road and spend 30 € the information to make the payment?

regards

[nexus99]

Checked technobit.eu and it looks like there isn't anything available here.

[lucazane]

Checked technobit.eu and it looks like there isn't anything available here.

Normal, there is I think 2 batches per month (for HEX16B) in limited quantity (I have seen ~50 when I ordered mine) and a few hour after it was out of stock

[braindead]

Anyne here could help me starting with 16A boards ?? I´ve connected 3 boards to a PSU 300W, when i turn on the PSU they start working and computer detects them well on usb, my problem is with HEXminer, i can´t push the voltage on the chips more than 1V also when i press start i won´t get any numbers on the program, it seems to be running but i won´t get hash speed etc etc, no values ... something i must do on router ?? or

[marto74]

Anyne here could help me starting with 16A boards ?? I´ve connected 3 boards to a PSU 300W, when i turn on the PSU they start working and computer detects them well on usb, my problem is with HEXminer, i can´t push the voltage on the chips more than 1V also when i press start i won´t get any numbers on the program, it seems to be running but i won´t get hash speed etc etc, no values ... something i must do on router ?? or

Just uncheck Bitfury check button

[nexus99]

Anyone know how much 552 is in BTC?

Thanks!

[braindead]

Anyne here could help me starting with 16A boards ?? I´ve connected 3 boards to a PSU 300W, when i turn on the PSU they start working and computer detects them well on usb, my problem is with HEXminer, i can´t push the voltage on the chips more than 1V also when i press start i won´t get any numbers on the program, it seems to be running but i won´t get hash speed etc etc, no values ... something i must do on router ?? or

Just uncheck Bitfury check button

Nop didn´t work  Still same results, i´m now trying with only 1 board connected to psu

I can´t go further than 1,000 V also when i start all values remain 00, i´ve opened another threat in Hardware section where i posted a screenshot

[poochone]

Hi i need 2 board assembled without chips shipped to uk let me now with price\

[cy8ex]

did you have any news when my order will be ready ?
I'm waiting since 2013-09-20 and getting no reply from your customer support. 
Order Reference is TEGHAXVCJ

To be ready for ship Monday.
You did not paid for transport
Please organize it

i want to choose additional shipping option, i sent you pm about this...