[ANN][TZC] TrezarCoin Super-Secure-PoW/PoS

[SharnThoR]

I've been mining TZC successfully for a while. But decided to try solo mining with ccminer.

What I want to know though, is how do you check your income and balances etc or do you simply just wait for the funds to reflect into your wallet?

Also, normally in ccminer you have to add "-p c=TCZ", but with the solo mining you simply type in a password. Is this okay then?

For solomining, an accepted is actually a block not a share, so if you get one accepted in your ccminer you've hit an block and will get it credited to your wallet. - You have to use -u and -p from your .conf to connect to your local client.

Thank you for the feedback!

I've been hitting it for quite a while and getting blocks etc, but not gaining any coins at all. Restarted TZC wallet now and it synced right up. Restarted mining and immediately it says "127.0.01:17299 neoscrypt block xxxxxx, then below that my kh/s on the cards etc. No credits into my account at all.

Also, while doing this, my wallet keeps on going out of sync for some reason. Just came back to my wallet now to see that it's behind by 200+ blocks?? Why?

I copied config from page 1 and added all the addnodes in also.

@CheKaz, have you perhaps got any advise on this please? Been mining to my config IP the whole day now and absolutely nothing...
I've unlocked the wallet and POS mining is enabled

[aciddude]

I've been mining TZC successfully for a while. But decided to try solo mining with ccminer.

What I want to know though, is how do you check your income and balances etc or do you simply just wait for the funds to reflect into your wallet?

Also, normally in ccminer you have to add "-p c=TCZ", but with the solo mining you simply type in a password. Is this okay then?

For solomining, an accepted is actually a block not a share, so if you get one accepted in your ccminer you've hit an block and will get it credited to your wallet. - You have to use -u and -p from your .conf to connect to your local client.

Thank you for the feedback!

I've been hitting it for quite a while and getting blocks etc, but not gaining any coins at all. Restarted TZC wallet now and it synced right up. Restarted mining and immediately it says "127.0.01:17299 neoscrypt block xxxxxx, then below that my kh/s on the cards etc. No credits into my account at all.

Also, while doing this, my wallet keeps on going out of sync for some reason. Just came back to my wallet now to see that it's behind by 200+ blocks?? Why?

I copied config from page 1 and added all the addnodes in also.

@CheKaz, have you perhaps got any advise on this please? Been mining to my config IP the whole day now and absolutely nothing...
I've unlocked the wallet and POS mining is enabled

From what I've read it looks like you're trying to Solo Mine.

When you mine on a pool, you submit "shares" so your miner will say something like "YAY! Share accepted"

If you solo mine you wont see any of those messages unless you solve a full block.  If you solve a full block you will be rewarded the current reward of 100 TZC.

How many cards do you have ? The current difficulty for POW: 141.98991164   - This is higher than Feathercoin right now.

In order for you to Solo mine and solve a block at that difficulty you'd need a few rigs at best.  It also depends greatly on luck...but if you're mining with a few cards small cards, you probably have more luck playing your local lottery than solving a block. Welcome to the world of mining.


If you're impatient and you want to see profits more regularly, then join a pool.

--
as for your wallet getting out of sync....I've never seen this happen with any coin including Trezarcoin. I'd say get your machine on a wired connection and dont keep it on Wifi. 

[SharnThoR]

I've been mining TZC successfully for a while. But decided to try solo mining with ccminer.

What I want to know though, is how do you check your income and balances etc or do you simply just wait for the funds to reflect into your wallet?

Also, normally in ccminer you have to add "-p c=TCZ", but with the solo mining you simply type in a password. Is this okay then?

For solomining, an accepted is actually a block not a share, so if you get one accepted in your ccminer you've hit an block and will get it credited to your wallet. - You have to use -u and -p from your .conf to connect to your local client.

Thank you for the feedback!

I've been hitting it for quite a while and getting blocks etc, but not gaining any coins at all. Restarted TZC wallet now and it synced right up. Restarted mining and immediately it says "127.0.01:17299 neoscrypt block xxxxxx, then below that my kh/s on the cards etc. No credits into my account at all.

Also, while doing this, my wallet keeps on going out of sync for some reason. Just came back to my wallet now to see that it's behind by 200+ blocks?? Why?

I copied config from page 1 and added all the addnodes in also.

@CheKaz, have you perhaps got any advise on this please? Been mining to my config IP the whole day now and absolutely nothing...
I've unlocked the wallet and POS mining is enabled

From what I've read it looks like you're trying to Solo Mine.

When you mine on a pool, you submit "shares" so your miner will say something like "YAY! Share accepted"

If you solo mine you wont see any of those messages unless you solve a full block.  If you solve a full block you will be rewarded the current reward of 100 TZC.

How many cards do you have ? The current difficulty for POW: 141.98991164   - This is higher than Feathercoin right now.

In order for you to Solo mine and solve a block at that difficulty you'd need a few rigs at best.  It also depends greatly on luck...but if you're mining with a few cards small cards, you probably have more luck playing your local lottery than solving a block. Welcome to the world of mining.


If you're impatient and you want to see profits more regularly, then join a pool.

--
as for your wallet getting out of sync....I've never seen this happen with any coin including Trezarcoin. I'd say get your machine on a wired connection and dont keep it on Wifi.  

Thank you! Now I understand it a lot better... I really just wanted to test solo mining and making sure I understand how it works. Now I also know that the difficulty is too high for a test, lol.

Coming back to the wallet... I seem to be getting this a lot. This is from the debug.log file. Wallet just starts, then disappears without opening. Only way to fix this is to delete all the files and start all over again...downloading the blocks from scratch takes forever!

01/02/18 17:36:11 Reindexing the block file blk00000.dat...
01/02/18 17:36:11 CBlock(hash=24502ba55d673d2ee9170d83dae2d1adb3bfb4718e4f200db9951382cc4f6ee6, ver=1, hashPrevBlock=0000000000000000000000000000000000000000000000000000000000000000, hashMerkleRoot=a95b9f457f70633fcff90450ed57bbfc4dd45cb2034619b7c54ee80a1d266e91, nTime=1504267200, nBits=1e0fffff, nNonce=3007239, vtx=1, vchBlockSig=)
01/02/18 17:36:11   Coinbase(hash=a95b9f457f, nTime=1504267100, ver=2, vin.size=1, vout.size=1, nLockTime=0, strTxComment=text:Trezarcoin genesis block)
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 04ffff001d020f274c6b416c69656e20736561726368206465746563747320726164696f2073696 76e616c732066726f6d2064776172662067616c6178792033626e206c6967687420796561727320 66726f6d204561727468202d2054686520477561726469616e202d20312f5365702f32303137)
    CTxOut(empty)
  vMerkleTree: a95b9f457f

EDIT: Delete the blktree folder and wallet can start again, but then it needs to sync again from scratch... Restore the folder and wallet doesn't start again

[ra213]

Is there an estimation how many coins do you need for staking? I mean with 100 coins it is really unlikely that you ever get a staking reward. But how can I calculate the probability of getting a staking reward in the next week, month or year?

[zeki555]

Is there an estimation how many coins do you need for staking? I mean with 100 coins it is really unlikely that you ever get a staking reward. But how can I calculate the probability of getting a staking reward in the next week, month or year?

Here's a pos calc http://crofly.bplaced.net/ you can get here via the resources tab on the site https://trezarcoin.com/

[maad]

Is there an estimation how many coins do you need for staking? I mean with 100 coins it is really unlikely that you ever get a staking reward. But how can I calculate the probability of getting a staking reward in the next week, month or year?

Here's a pos calc http://crofly.bplaced.net/ you can get here via the resources tab on the site https://trezarcoin.com/

Very nice, just one question how to find out/verify actual "POS difficulty"?

[zeki555]

Is there an estimation how many coins do you need for staking? I mean with 100 coins it is really unlikely that you ever get a staking reward. But how can I calculate the probability of getting a staking reward in the next week, month or year?

Here's a pos calc http://crofly.bplaced.net/ you can get here via the resources tab on the site https://trezarcoin.com/

Very nice, just one question how to find out/verify actual "POS difficulty"?

You can see pos difficulty in your wallet when you go over the bottom right with your mouse. currently it's 29.4632

[maad]

@zeki555 @fenrisl

Thx now it is clear.

[ra213]

Is there an estimation how many coins do you need for staking? I mean with 100 coins it is really unlikely that you ever get a staking reward. But how can I calculate the probability of getting a staking reward in the next week, month or year?

Here's a pos calc http://crofly.bplaced.net/ you can get here via the resources tab on the site https://trezarcoin.com/

Thank you!

I am not sure about the values. What are 'Number of Coins per Input' and 'Number of Inputs'?

For example, if I have 1000 Coins on a single address. Would I use
'Number of Coins per Input' = 1000
'Number of Inputs' = 1
?

[zeki555]

Is there an estimation how many coins do you need for staking? I mean with 100 coins it is really unlikely that you ever get a staking reward. But how can I calculate the probability of getting a staking reward in the next week, month or year?

Here's a pos calc http://crofly.bplaced.net/ you can get here via the resources tab on the site https://trezarcoin.com/

Thank you!

I am not sure about the values. What are 'Number of Coins per Input' and 'Number of Inputs'?

For example, if I have 1000 Coins on a single address. Would I use
'Number of Coins per Input' = 1000
'Number of Inputs' = 1
?

It's explained in detail on the website plus there's a tutorial on youtube (also placed on the website) https://trezarcoin.com/pos/

[bewmint]

How to fix this? Thanks.

https://imgur.com/a/Ru2zN

[zeki555]

How to fix this? Thanks.

https://imgur.com/a/Ru2zN

https://imgur.com/a/Ru2zN

Add these nodes to your trezarcoin.conf (if you don't have one create one) file to improve your wallet connectivity to the network:

addnode=185.213.210.221:53740
addnode=73.237.102.32:59777
addnode=47.208.105.74:11315
addnode=5.240.11.137:64425
addnode=176.159.112.85:59237
addnode=188.242.118.114:37285
addnode=5.44.169.46:49291
addnode=162.217.249.198:55383
addnode=116.100.160.65:64046
addnode=14.226.75.73:53267
addnode=80.110.114.112:7677
addnode=68.111.254.128:17298
addnode=93.115.61.74:50791
addnode=212.143.244.194:57699
addnode=91.202.46.63:57345
addnode=78.180.172.159:57469
addnode=178.165.68.219:17298
addnode=212.112.153.139:51318
addnode=213.27.32.68:61600
addnode=185.39.74.210:59297
addnode=109.232.227.133:63397
addnode=116.105.206.34:57699
addnode=188.243.232.224:62745
addnode=37.219.18.171:14620
addnode=178.188.184.241:60025
addnode=185.137.97.14:56448
addnode=90.20.156.87:63982
addnode=188.19.232.127:50003
addnode=75.109.71.168:50915
addnode=89.141.164.216:61425
addnode=201.1.80.41:49578
addnode=87.105.139.164:63662

addnode=180.211.175.181:17298
addnode=109.189.50.14:57087
addnode=64.199.25.9:54382
addnode=103.73.92.65:63184
addnode=171.6.242.22:64538
addnode=176.100.61.37:52541
addnode=110.20.75.83:58339
addnode=37.187.146.34:17298
addnode=178.203.233.245:1276
addnode=83.30.223.115:17298
addnode=85.93.59.50:2218
addnode=2.37.162.168:17298
addnode=178.251.219.166:63567
addnode=91.126.237.243:17298
addnode=84.234.52.190:42892
addnode=213.149.51.206:4081
addnode=217.129.212.100:50084
addnode=93.34.239.151:64047
addnode=94.54.4.218:4872
addnode=49.35.21.78:52955
addnode=85.140.113.81:64903
addnode=109.64.60.7:53070
addnode=ec2-35-182-231-94.ca-central-1.compute.amazonaws.com:17298
addnode=ec2-107-20-130-221.compute-1.amazonaws.com:17298
addnode=ec2-34-213-225-118.us-west-2.compute.amazonaws.com:17298
addnode=ec2-52-59-255-239.eu-central-1.compute.amazonaws.com:17298
addnode=ec2-54-252-216-76.ap-southeast-2.compute.amazonaws.com:17298

[bewmint]

How to fix this? Thanks.

https://imgur.com/a/Ru2zN

Add these nodes to your trezarcoin.conf (if you don't have one create one) file to improve your wallet connectivity to the network:

addnode=185.213.210.221:53740
addnode=73.237.102.32:59777
addnode=47.208.105.74:11315
addnode=5.240.11.137:64425
addnode=176.159.112.85:59237
addnode=188.242.118.114:37285
addnode=5.44.169.46:49291
addnode=162.217.249.198:55383
addnode=116.100.160.65:64046
addnode=14.226.75.73:53267
addnode=80.110.114.112:7677
addnode=68.111.254.128:17298
addnode=93.115.61.74:50791
addnode=212.143.244.194:57699
addnode=91.202.46.63:57345
addnode=78.180.172.159:57469
addnode=178.165.68.219:17298
addnode=212.112.153.139:51318
addnode=213.27.32.68:61600
addnode=185.39.74.210:59297
addnode=109.232.227.133:63397
addnode=116.105.206.34:57699
addnode=188.243.232.224:62745
addnode=37.219.18.171:14620
addnode=178.188.184.241:60025
addnode=185.137.97.14:56448
addnode=90.20.156.87:63982
addnode=188.19.232.127:50003
addnode=75.109.71.168:50915
addnode=89.141.164.216:61425
addnode=201.1.80.41:49578
addnode=87.105.139.164:63662

addnode=180.211.175.181:17298
addnode=109.189.50.14:57087
addnode=64.199.25.9:54382
addnode=103.73.92.65:63184
addnode=171.6.242.22:64538
addnode=176.100.61.37:52541
addnode=110.20.75.83:58339
addnode=37.187.146.34:17298
addnode=178.203.233.245:1276
addnode=83.30.223.115:17298
addnode=85.93.59.50:2218
addnode=2.37.162.168:17298
addnode=178.251.219.166:63567
addnode=91.126.237.243:17298
addnode=84.234.52.190:42892
addnode=213.149.51.206:4081
addnode=217.129.212.100:50084
addnode=93.34.239.151:64047
addnode=94.54.4.218:4872
addnode=49.35.21.78:52955
addnode=85.140.113.81:64903
addnode=109.64.60.7:53070
addnode=ec2-35-182-231-94.ca-central-1.compute.amazonaws.com:17298
addnode=ec2-107-20-130-221.compute-1.amazonaws.com:17298
addnode=ec2-34-213-225-118.us-west-2.compute.amazonaws.com:17298
addnode=ec2-52-59-255-239.eu-central-1.compute.amazonaws.com:17298
addnode=ec2-54-252-216-76.ap-southeast-2.compute.amazonaws.com:17298

It's work!!! Thank you.

[makko91]

I still waiting for my 1st POS reward... I have the wallet always open... how long should I wait for it ?

[aciddude]

Thank you! Now I understand it a lot better... I really just wanted to test solo mining and making sure I understand how it works. Now I also know that the difficulty is too high for a test, lol.

Coming back to the wallet... I seem to be getting this a lot. This is from the debug.log file. Wallet just starts, then disappears without opening. Only way to fix this is to delete all the files and start all over again...downloading the blocks from scratch takes forever!

01/02/18 17:36:11 Reindexing the block file blk00000.dat...
01/02/18 17:36:11 CBlock(hash=24502ba55d673d2ee9170d83dae2d1adb3bfb4718e4f200db9951382cc4f6ee6, ver=1, hashPrevBlock=0000000000000000000000000000000000000000000000000000000000000000, hashMerkleRoot=a95b9f457f70633fcff90450ed57bbfc4dd45cb2034619b7c54ee80a1d266e91, nTime=1504267200, nBits=1e0fffff, nNonce=3007239, vtx=1, vchBlockSig=)
01/02/18 17:36:11   Coinbase(hash=a95b9f457f, nTime=1504267100, ver=2, vin.size=1, vout.size=1, nLockTime=0, strTxComment=text:Trezarcoin genesis block)
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 04ffff001d020f274c6b416c69656e20736561726368206465746563747320726164696f2073696 76e616c732066726f6d2064776172662067616c6178792033626e206c6967687420796561727320 66726f6d204561727468202d2054686520477561726469616e202d20312f5365702f32303137)
    CTxOut(empty)
  vMerkleTree: a95b9f457f

EDIT: Delete the blktree folder and wallet can start again, but then it needs to sync again from scratch... Restore the folder and wallet doesn't start again

How often is this happening ?   Are you shutting down your machine incorrectly ?   

The trezarcoin blockchain is quite small since the coin is quite new.  A full sync shouldnt take more than 1 Hour...I usually get a full sync in 25 mins.

[SharnThoR]

Thank you! Now I understand it a lot better... I really just wanted to test solo mining and making sure I understand how it works. Now I also know that the difficulty is too high for a test, lol.

Coming back to the wallet... I seem to be getting this a lot. This is from the debug.log file. Wallet just starts, then disappears without opening. Only way to fix this is to delete all the files and start all over again...downloading the blocks from scratch takes forever!

01/02/18 17:36:11 Reindexing the block file blk00000.dat...
01/02/18 17:36:11 CBlock(hash=24502ba55d673d2ee9170d83dae2d1adb3bfb4718e4f200db9951382cc4f6ee6, ver=1, hashPrevBlock=0000000000000000000000000000000000000000000000000000000000000000, hashMerkleRoot=a95b9f457f70633fcff90450ed57bbfc4dd45cb2034619b7c54ee80a1d266e91, nTime=1504267200, nBits=1e0fffff, nNonce=3007239, vtx=1, vchBlockSig=)
01/02/18 17:36:11   Coinbase(hash=a95b9f457f, nTime=1504267100, ver=2, vin.size=1, vout.size=1, nLockTime=0, strTxComment=text:Trezarcoin genesis block)
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 04ffff001d020f274c6b416c69656e20736561726368206465746563747320726164696f2073696 76e616c732066726f6d2064776172662067616c6178792033626e206c6967687420796561727320 66726f6d204561727468202d2054686520477561726469616e202d20312f5365702f32303137)
    CTxOut(empty)
  vMerkleTree: a95b9f457f

EDIT: Delete the blktree folder and wallet can start again, but then it needs to sync again from scratch... Restore the folder and wallet doesn't start again

How often is this happening ?   Are you shutting down your machine incorrectly ?  

The trezarcoin blockchain is quite small since the coin is quite new.  A full sync shouldnt take more than 1 Hour...I usually get a full sync in 25 mins.

This is now getting beyond stupid!!!!

Everything was perfect the whole day. System crashed. Shut down, then started up again. ALL other wallets working perfectly well ACCEPT for TZC wallet.

Exact same thing just happened again with the exact same code in db log.

WTH?

EDIT: Full sync takes nearly the whole day as my internet isn't THAT great. 10mb/s ADSL line.

[nesic1]

yo dev what is the plan for lightning and segwith

[NetTime]

Thank you! Now I understand it a lot better... I really just wanted to test solo mining and making sure I understand how it works. Now I also know that the difficulty is too high for a test, lol.

Coming back to the wallet... I seem to be getting this a lot. This is from the debug.log file. Wallet just starts, then disappears without opening. Only way to fix this is to delete all the files and start all over again...downloading the blocks from scratch takes forever!

01/02/18 17:36:11 Reindexing the block file blk00000.dat...
01/02/18 17:36:11 CBlock(hash=24502ba55d673d2ee9170d83dae2d1adb3bfb4718e4f200db9951382cc4f6ee6, ver=1, hashPrevBlock=0000000000000000000000000000000000000000000000000000000000000000, hashMerkleRoot=a95b9f457f70633fcff90450ed57bbfc4dd45cb2034619b7c54ee80a1d266e91, nTime=1504267200, nBits=1e0fffff, nNonce=3007239, vtx=1, vchBlockSig=)
01/02/18 17:36:11   Coinbase(hash=a95b9f457f, nTime=1504267100, ver=2, vin.size=1, vout.size=1, nLockTime=0, strTxComment=text:Trezarcoin genesis block)
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 04ffff001d020f274c6b416c69656e20736561726368206465746563747320726164696f2073696 76e616c732066726f6d2064776172662067616c6178792033626e206c6967687420796561727320 66726f6d204561727468202d2054686520477561726469616e202d20312f5365702f32303137)
    CTxOut(empty)
  vMerkleTree: a95b9f457f

EDIT: Delete the blktree folder and wallet can start again, but then it needs to sync again from scratch... Restore the folder and wallet doesn't start again

How often is this happening ?   Are you shutting down your machine incorrectly ?  

The trezarcoin blockchain is quite small since the coin is quite new.  A full sync shouldnt take more than 1 Hour...I usually get a full sync in 25 mins.

This is now getting beyond stupid!!!!

Everything was perfect the whole day. System crashed. Shut down, then started up again. ALL other wallets working perfectly well ACCEPT for TZC wallet.

Exact same thing just happened again with the exact same code in db log.

WTH?

EDIT: Full sync takes nearly the whole day as my internet isn't THAT great. 10mb/s ADSL line.

Make a copy of the TZC data folder, zip it and move somewhere safe.  If wallet crashes, unzip folder and replace files will save time resyncing.  Works when my wallet crashes.

[zeki555]

Thank you! Now I understand it a lot better... I really just wanted to test solo mining and making sure I understand how it works. Now I also know that the difficulty is too high for a test, lol.

Coming back to the wallet... I seem to be getting this a lot. This is from the debug.log file. Wallet just starts, then disappears without opening. Only way to fix this is to delete all the files and start all over again...downloading the blocks from scratch takes forever!

01/02/18 17:36:11 Reindexing the block file blk00000.dat...
01/02/18 17:36:11 CBlock(hash=24502ba55d673d2ee9170d83dae2d1adb3bfb4718e4f200db9951382cc4f6ee6, ver=1, hashPrevBlock=0000000000000000000000000000000000000000000000000000000000000000, hashMerkleRoot=a95b9f457f70633fcff90450ed57bbfc4dd45cb2034619b7c54ee80a1d266e91, nTime=1504267200, nBits=1e0fffff, nNonce=3007239, vtx=1, vchBlockSig=)
01/02/18 17:36:11   Coinbase(hash=a95b9f457f, nTime=1504267100, ver=2, vin.size=1, vout.size=1, nLockTime=0, strTxComment=text:Trezarcoin genesis block)
    CTxIn(COutPoint(0000000000, 4294967295), coinbase 04ffff001d020f274c6b416c69656e20736561726368206465746563747320726164696f2073696 76e616c732066726f6d2064776172662067616c6178792033626e206c6967687420796561727320 66726f6d204561727468202d2054686520477561726469616e202d20312f5365702f32303137)
    CTxOut(empty)
  vMerkleTree: a95b9f457f

EDIT: Delete the blktree folder and wallet can start again, but then it needs to sync again from scratch... Restore the folder and wallet doesn't start again

How often is this happening ?   Are you shutting down your machine incorrectly ?  

The trezarcoin blockchain is quite small since the coin is quite new.  A full sync shouldnt take more than 1 Hour...I usually get a full sync in 25 mins.

This is now getting beyond stupid!!!!

Everything was perfect the whole day. System crashed. Shut down, then started up again. ALL other wallets working perfectly well ACCEPT for TZC wallet.

Exact same thing just happened again with the exact same code in db log.

WTH?

EDIT: Full sync takes nearly the whole day as my internet isn't THAT great. 10mb/s ADSL line.

Make a copy of the TZC data folder, zip it and move somewhere safe.  If wallet crashes, unzip folder and replace files will save time resyncing.  Works when my wallet crashes.

Yeah I have mine on USB and update it regularly.

[marvel213]

How many coins do you get per stake coins?

Let say I have 10000 coins.  How many coins would fall my way when it does get a pos reward?