Permonik
Member
Offline
Activity: 275
Merit: 11
|
|
June 20, 2018, 09:19:23 PM |
|
I recommend editing and applying your own power play tables so you do not need to worry about those utility tools. This video will explain everything and the links are in the description under the video. https://www.youtube.com/watch?v=WtlH3DyQbHQHi guys, Is there anyone who has Vega Frontier edition liquid cooling and using adrenalin drivers 18.4.1? I have couple of vega 64 LC and 2x frontiers on one rig and I am unable to change values on frontiers via overdriveNtool. THX for help.
Ok, that is good, but I have a problem with the downloaded file. The lines 43 to 92 are not working for me. I am not sure why... Ok, but anyway I need tables for Frontier edition liquid cooling, I am not sure if the air cooling version is the same... ?
|
|
|
|
KevinCookeMMA
Jr. Member
Offline
Activity: 48
Merit: 1
|
|
June 20, 2018, 10:43:55 PM |
|
How do you get Vega Frontiers to 2,100 hash on CN Heavy? Most I have gotten in 1600
|
|
|
|
Permonik
Member
Offline
Activity: 275
Merit: 11
|
|
June 21, 2018, 05:22:25 AM |
|
I recommend editing and applying your own power play tables so you do not need to worry about those utility tools. This video will explain everything and the links are in the description under the video. https://www.youtube.com/watch?v=WtlH3DyQbHQHi guys, Is there anyone who has Vega Frontier edition liquid cooling and using adrenalin drivers 18.4.1? I have couple of vega 64 LC and 2x frontiers on one rig and I am unable to change values on frontiers via overdriveNtool. THX for help.
Ok, that is good, but I have a problem with the downloaded file. The lines 43 to 92 are not working for me. I am not sure why... Ok, but anyway I need tables for Frontier edition liquid cooling, I am not sure if the air cooling version is the same... ? Ok, editor is now working for me. But the card fan on water block acting badly. No matter how many rpms I set on fan in ppt, it has always 1000-1100rpm and this mean more than 60degrees.
|
|
|
|
Sgsg666
Jr. Member
Offline
Activity: 113
Merit: 1
|
|
June 21, 2018, 09:22:39 AM Last edit: June 24, 2018, 08:11:43 AM by Sgsg666 |
|
Hi, a new Cast XMR version is available. The only change is the support for CryptoNight-Fast. Happy Masari mining, glph3k Cast XMR Version 1.2.5 (2018/6/19)- Support for CryptoNight-Fast introduced with the Masari (MSR) update. Set --algo=8 to mine Masari (MSR). CryptoNight-Fast will produce higher hash rates than classic CryptoNight, typical hash rates are: - Vega64, 1025 Mhz MemClock: 3630 Hashes/s - Vega56, 945 Mhz MemClock: 3700 Hashes/s - VegaFE, 1025 Mhz MemClock: 3900 Hashes/s - RX 470/570, 2250 Mhz MemClock: 1550 Hashes/s Download Cast XMR 1.2.5 for Windows (64bit)SHA256 hash of cast_xmr-vega-win64_125.zip: 8ae0f32f517d30488d9ae9a3f0a44253fd0c1dc99ac98ff3b4172b970489ed08 Im only getting 3500+ on intensity 8 (vega 56, cn fast)? any ideas what could be wrong? 1408/906;950/900
|
|
|
|
JeuTheIdit
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 21, 2018, 06:48:03 PM |
|
It seems like I cannot get the remote monitor working. Remote monitoring is enabled since the dialogue appears during start up and I have made sure cast is allowed by my firewall, however when going to 127.0.0.1:7777 on another device I get a unable to connect error.
Any ideas?
|
|
|
|
netgeek3
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 21, 2018, 08:17:46 PM |
|
How do you get Vega Frontiers to 2,100 hash on CN Heavy? Most I have gotten in 1600
1) Set up standard PowerPlay tables 2) Restart cards with switch-radeon-gpu 3) Disable HBCC and enable large pages through switch-radeon-gpu 4) Double-check the correct values through OverdriveNTool 5) Run Cast with intensity set to 11 That's all I did and I am sustaining 2100+ hash/s
|
|
|
|
Wananavu99
|
|
June 24, 2018, 12:54:18 AM |
|
This is on Cast XMR mining.
Individual tests, one card is only doing 200-300 h/s, even though they all have the exact same driver update. Any solution to this?
GPU0
[16:59:45] Initializing GPU, loading kernel ... Detected OpenCL Platform: OpenCL 2.1 AMD-APP (2580.6) Driver Version OK. GPU0: Radeon RX Vega (gfx900) | 56 Compute Units | Memory (MB): 8176 | Intensity: 7 / 10 [16:59:56] Connecting to 52.168.91.103:5555 ... [16:59:56] Connected to pool. [16:59:56] New Job received (CryptoNightV7). [16:59:56] Difficulty changed. Now: 10000. [17:00:00] GPU0 | 39°C | Fan 0 RPM | 1671.6 H/s [17:00:02] GPU0 Found Nonce, submitting... [17:00:02] Share Accepted -> +1 [17:00:02] Shares: 1 Accepted, 0 Errors | Hash Rate Avg: 1671.6 H/s | Avg Search Time: 0.0 sec [17:00:04] GPU0 | 41°C | Fan 0 RPM | 1734.8 H/s [17:00:08] GPU0 | 43°C | Fan 0 RPM | 1734.8 H/s [17:00:13] GPU0 | 44°C | Fan 0 RPM | 1733.9 H/s [17:00:17] GPU0 | 46°C | Fan 0 RPM | 1734.3 H/s [17:00:18] New Job received (CryptoNightV7). Avg Job Time: 22.0 sec [17:00:18] Difficulty changed. Now: 15000.
GPU3
[16:57:59] Initializing GPU, loading kernel ... Detected OpenCL Platform: OpenCL 2.1 AMD-APP (2580.6) Driver Version OK. GPU3: Radeon RX Vega (gfx900) | 56 Compute Units | Memory (MB): 8176 | Intensity: 7 / 10 [16:58:11] Connecting to 52.168.91.103:5555 ... [16:58:11] Connected to pool. [16:58:11] New Job received (CryptoNightV7). [16:58:11] Difficulty changed. Now: 10000. [16:58:12] New Job received (CryptoNightV7). Avg Job Time: 1.0 sec [16:58:28] GPU3 | 37°C | Fan 0 RPM | 206.3 H/s [16:58:46] GPU3 | 42°C | Fan 0 RPM | 206.2 H/s [16:59:03] GPU3 | 47°C | Fan 0 RPM | 205.1 H/s [16:59:03] GPU3 Found Nonce, submitting... [16:59:03] Share Accepted -> +1 [16:59:03] Shares: 1 Accepted, 0 Errors | Hash Rate Avg: 205.9 H/s | Avg Search Time: 0.0 sec [16:59:03] GPU3 Found Nonce, submitting... [16:59:04] Share Accepted -> +1 [16:59:04] Shares: 2 Accepted, 0 Errors | Hash Rate Avg: 205.9 H/s | Avg Search Time: 26.0 sec [16:59:18] New Job received (CryptoNightV7). Avg Job Time: 33.5 sec [16:59:18] Difficulty changed. Now: 15000. [16:59:21] GPU3 | 51°C | Fan 0 RPM | 203.8 H/s
|
|
|
|
nokia5556
Newbie
Offline
Activity: 35
Merit: 0
|
|
June 25, 2018, 02:16:32 PM |
|
Hi, a new Cast XMR version is available. The only change is the support for CryptoNight-Fast. Happy Masari mining, glph3k Cast XMR Version 1.2.5 (2018/6/19)- Support for CryptoNight-Fast introduced with the Masari (MSR) update. Set --algo=8 to mine Masari (MSR). CryptoNight-Fast will produce higher hash rates than classic CryptoNight, typical hash rates are: - Vega64, 1025 Mhz MemClock: 3630 Hashes/s - Vega56, 945 Mhz MemClock: 3700 Hashes/s - VegaFE, 1025 Mhz MemClock: 3900 Hashes/s - RX 470/570, 2250 Mhz MemClock: 1550 Hashes/s Download Cast XMR 1.2.5 for Windows (64bit)SHA256 hash of cast_xmr-vega-win64_125.zip: 8ae0f32f517d30488d9ae9a3f0a44253fd0c1dc99ac98ff3b4172b970489ed08 Any fix for API reporting full hashrates without comma?
|
|
|
|
cranefist
Newbie
Offline
Activity: 205
Merit: 0
|
|
June 25, 2018, 08:09:24 PM |
|
Has anyone had problems with couple of the latest releases?
From 5 cards, it anymore starts 2. If i start one miner per card, 2 of them will stay up and 3 will close right before the first green message.
Cast XMR 1.1.0 still works perfectly, but the later version do no longer work on my setup.
|
|
|
|
netgeek3
Newbie
Offline
Activity: 12
Merit: 0
|
|
June 25, 2018, 11:34:51 PM |
|
Has anyone had problems with couple of the latest releases?
From 5 cards, it anymore starts 2. If i start one miner per card, 2 of them will stay up and 3 will close right before the first green message.
Cast XMR 1.1.0 still works perfectly, but the later version do no longer work on my setup.
We haven't had much trouble with cards starting, though we have seen that on a few of the FE cards. Our rigs are one of 2 configs: Asus B250 Mining mobo w/G4400 CPU, 8GB RAM, 120GB SSD 6 x Vega 64 2 x EVGA 1000W PS Gigabyte B250 Fintech mobo w/G4400 CPU, 8GB RAM, 120GB SSD 4 x Vega FE 1 x EVGA 1000W PS Yes, I know we could pack more cards in, but these configs have been incredibly stable, and that's worth some bucks to us. What we have seen in recent updates is more random hangs, and some of the Vega 56s we were running would not stay stable, so we replaced them with 64s. Since then, no real issues. Thanks, Gandalph3000 for an amazing piece of code, in spite of all the bitching that goes on here. You'll never please everyone, but our operation is mighty happy with your program!
|
|
|
|
cranefist
Newbie
Offline
Activity: 205
Merit: 0
|
|
June 26, 2018, 12:22:29 PM Last edit: June 26, 2018, 02:04:43 PM by cranefist |
|
Has anyone had problems with couple of the latest releases?
From 5 cards, it anymore starts 2. If i start one miner per card, 2 of them will stay up and 3 will close right before the first green message.
Cast XMR 1.1.0 still works perfectly, but the later version do no longer work on my setup.
We haven't had much trouble with cards starting, though we have seen that on a few of the FE cards. Our rigs are one of 2 configs: Asus B250 Mining mobo w/G4400 CPU, 8GB RAM, 120GB SSD 6 x Vega 64 2 x EVGA 1000W PS Gigabyte B250 Fintech mobo w/G4400 CPU, 8GB RAM, 120GB SSD 4 x Vega FE 1 x EVGA 1000W PS Yes, I know we could pack more cards in, but these configs have been incredibly stable, and that's worth some bucks to us. What we have seen in recent updates is more random hangs, and some of the Vega 56s we were running would not stay stable, so we replaced them with 64s. Since then, no real issues. Thanks, Gandalph3000 for an amazing piece of code, in spite of all the bitching that goes on here. You'll never please everyone, but our operation is mighty happy with your program! Just wondering what has changed to cause this, i have a dual cpu board and i think only the cards on the CPU1 pcie lanes start anymore. I think its somehow related to this dual CPU system, as the CPU0 bus id:s are negative, -119, -122 etc.. and SRBMiner for example does not read temperatures from these cards, but it still runs. But something has changed since 1.1, as that version works flawlessly.
|
|
|
|
locbet
Newbie
Offline
Activity: 42
Merit: 0
|
|
June 27, 2018, 04:02:26 AM |
|
Hi, a new Cast XMR version is available. The only change is the support for CryptoNight-Fast. Happy Masari mining, glph3k Cast XMR Version 1.2.5 (2018/6/19)- Support for CryptoNight-Fast introduced with the Masari (MSR) update. Set --algo=8 to mine Masari (MSR). CryptoNight-Fast will produce higher hash rates than classic CryptoNight, typical hash rates are: - Vega64, 1025 Mhz MemClock: 3630 Hashes/s - Vega56, 945 Mhz MemClock: 3700 Hashes/s - VegaFE, 1025 Mhz MemClock: 3900 Hashes/s - RX 470/570, 2250 Mhz MemClock: 1550 Hashes/s Download Cast XMR 1.2.5 for Windows (64bit)SHA256 hash of cast_xmr-vega-win64_125.zip: 8ae0f32f517d30488d9ae9a3f0a44253fd0c1dc99ac98ff3b4172b970489ed08 Hashrate very good but My Rig 8 Vega 64 run on 30 minutes freeze tool. 1100mem --> restart cast xmr --> run OK --> Wait 30 minutes--> freeze (force close) --> rerun --> Not good. Please fix SRBMiner --> LOw Hashrate but not freeze .
|
|
|
|
glph3k (OP)
|
|
June 27, 2018, 07:06:47 AM |
|
Hashrate very good but My Rig 8 Vega 64 run on 30 minutes freeze tool. 1100mem --> restart cast xmr --> run OK --> Wait 30 minutes--> freeze (force close) --> rerun --> Not good. Please fix
Probably related to to high mem clock. 1100MHz is very ambitious and gets more unstable as more work has to be done. Try reducing to 1025 or even 945 and check if it runs stable for 24h first. If yes, it is not a software related problem. Regards, glph3k
|
|
|
|
locbet
Newbie
Offline
Activity: 42
Merit: 0
|
|
June 27, 2018, 07:46:19 AM |
|
Hashrate very good but My Rig 8 Vega 64 run on 30 minutes freeze tool. 1100mem --> restart cast xmr --> run OK --> Wait 30 minutes--> freeze (force close) --> rerun --> Not good. Please fix
Probably related to to high mem clock. 1100MHz is very ambitious and gets more unstable as more work has to be done. Try reducing to 1025 or even 945 and check if it runs stable for 24h first. If yes, it is not a software related problem. Regards, glph3k 945 Mem clock --> freeze. Why . Try again but not good
|
|
|
|
Jo82
Newbie
Offline
Activity: 18
Merit: 0
|
|
June 27, 2018, 03:31:05 PM |
|
I ve been running the older versions very stable on both my rigs. mining Haven and RYO, now my rigs are getting stuck after some hours.
someone had this problem and have a solution?
thnx
|
|
|
|
SpceGhst
Jr. Member
Offline
Activity: 269
Merit: 4
|
|
June 27, 2018, 04:04:16 PM |
|
I ve been running the older versions very stable on both my rigs. mining Haven and RYO, now my rigs are getting stuck after some hours.
someone had this problem and have a solution?
thnx
Have you changed clock/voltage settings lately? My mining window would freeze periodically, sometimes within a couple hours, sometimes a couple of days. I originally blamed Windows, but after some trial and error, discovered I’d reduced GPU voltage a little too much and after giving my cards more juice, rig has been running solid for over a week now.
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
|
June 27, 2018, 04:45:21 PM |
|
Hi glph3k, Im using the 110 version of your miner. This is very stable , after this version i have some hangs. When i start up the miner, it show me an rx560 on gpu9. I have one connected but is mining using claymore. Analysing the Hashes is working like an rx580. So is fine i think. What could this be? error in enumerating the devices? i only discover this today, maybe im mining in this way for weeks. Im using last 18.6.1 drivers, but wiht 18.5.x i got the same problem! Image: https://ibb.co/hSS3aThttps://ibb.co/j8Eo9oRegards
|
|
|
|
Skyzer0
Newbie
Offline
Activity: 266
Merit: 0
|
|
June 27, 2018, 09:22:21 PM |
|
hashrate rx570 4gb vs rx580 4gb?
i know rx580 8gb normaly does 800-850
in Cryptonight heavy
|
|
|
|
locbet
Newbie
Offline
Activity: 42
Merit: 0
|
|
June 28, 2018, 02:27:55 AM |
|
Hashrate very good but My Rig 8 Vega 64 run on 30 minutes freeze tool. 1100mem --> restart cast xmr --> run OK --> Wait 30 minutes--> freeze (force close) --> rerun --> Not good. Please fix
Probably related to to high mem clock. 1100MHz is very ambitious and gets more unstable as more work has to be done. Try reducing to 1025 or even 945 and check if it runs stable for 24h first. If yes, it is not a software related problem. Regards, glph3k Dear glph3k. My OverDriveNTool. Prev 1.0 run OK but 1.2.5 freeze https://ibb.co/jTof5Thttps://ibb.co/jTof5T
|
|
|
|
zeef
Newbie
Offline
Activity: 301
Merit: 0
|
|
June 28, 2018, 04:16:12 PM |
|
Hello guys! I have recently came across one thing - Paytomat. It’s whitepaper is surprisingly good. They already have a product that works, as well as POS-solutions to pay with crypto! It deserves to be checked!
is mineable?
|
|
|
|
|