Hiveon. №1 OS for mining

[thelovemyth]

got one step further.

Was using my original settings:

CORE 1315 DPM 4 V 950 MEM 2250 FAN 80

But also tried these from someone on page 13 of this thread:

CORE 1250 DPM 4 V 900 MEM 2250 FAN 80
Cards are running at 80% as I have that option in claymore settings

My cards (sapphire rx580 SE OC ) have been modded and run without issues under windows are 31.9MH/s at 103W/card.
Am using afterburner with 1315MHz GPU and 2250MHz mem.

have the rig up and running, but my MH/s are all over the place.

ETH - Total Speed: 167.028 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:12
ETH: GPU0 4.170 Mh/s, GPU1 3.547 Mh/s, GPU2 2.104 Mh/s, GPU3 31.417 Mh/s, GPU4 31.384 Mh/s, GPU5 31.449 Mh/s, GPU6 31.471 Mh/s, GPU7 31.487 Mh/s
ETH: 01/13/18-22:08:09 - New job from asia1.ethermine.org:14444
ETH - Total Speed: 112.118 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:12
ETH: GPU0 2.084 Mh/s, GPU1 4.170 Mh/s, GPU2 4.170 Mh/s, GPU3 3.569 Mh/s, GPU4 31.533 Mh/s, GPU5 31.492 Mh/s, GPU6 31.529 Mh/s, GPU7 3.570 Mh/s
ETH: 01/13/18-22:08:33 - New job from asia1.ethermine.org:14444
ETH - Total Speed: 138.264 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:13
ETH: GPU0 2.790 Mh/s, GPU1 4.168 Mh/s, GPU2 2.093 Mh/s, GPU3 31.523 Mh/s, GPU4 31.395 Mh/s, GPU5 31.524 Mh/s, GPU6 3.240 Mh/s, GPU7 31.532 Mh/s
ETH - Total Speed: 84.359 Mh/s, Total Shares: 23, Rejected: 0, Time: 00:15
ETH: GPU0 3.551 Mh/s, GPU1 3.551 Mh/s, GPU2 3.551 Mh/s, GPU3 31.537 Mh/s, GPU4 3.551 Mh/s, GPU5 31.517 Mh/s, GPU6 3.551 Mh/s, GPU7 3.550 Mh/s
ETH - Total Speed: 111.727 Mh/s, Total Shares: 17, Rejected: 0, Time: 00:12
ETH: GPU0 2.287 Mh/s, GPU1 4.167 Mh/s, GPU2 3.559 Mh/s, GPU3 31.545 Mh/s, GPU4 31.525 Mh/s, GPU5 3.559 Mh/s, GPU6 31.526 Mh/s, GPU7 3.559 Mh/s

I have seen the total go down as far a 24MH/s and as you can see the first 3 cards go to a max of around 4MH/s.

On ethermine.org, it shows me that I have a reported hash of 150.6MH/s and actual of 53.4MH/s
 
How would i be able to analyze this?

Edit: My stale shares also went from 5% to 27%
I am getting a lot of the below in my syslog.

amdgpu: [powerplay]
failed to send pre message 5c ret is 0
amdgpu: [powerplay]
failed to send message 5c ret is 0

I cant config to mine at ethermine, it show SHARE REJECT
But nanopool is ok. Anyone connect to Ethermine is ok ?

[MinersRus]

From the cpu.txt file for XMR-Stak:

 * If you do not wish to mine with your CPU(s) then use:
 * "cpu_threads_conf" :
 * null,

That means this: "cpu_threads_conf" : null,

Also are your Rig(s) on HiveOS 0.5-41?

[tristan-speccy]

Hive OS ASIC 0.1-02
- Added support for Antminer A3, D3, L3+
- Improved support for S9

The most important we have released public source code on GitHub
https://github.com/minershive/hiveos-asic

Install instructions and updates are there.
If you have installed S9 0.1-01 version please run install script again.

[bumbu100]

Can we mine VRM (verium) with cpu - secondary miner?

[wolf_miner]

Hi, is Cryptonite V7 supported on HiveOS. There is a miner integrated in HiveOS for this algo optimized for Nvidia GPU?

Cheers W_M

[CryptoDocker]

Hi, is Cryptonite V7 supported on HiveOS. There is a miner integrated in HiveOS for this algo optimized for Nvidia GPU?

Cheers W_M

Yes its supported with XMRig / XMR Stak and Claymore Cryptonote (AMD only)

[MinersRus]

Hi, is Cryptonite V7 supported on HiveOS. There is a miner integrated in HiveOS for this algo optimized for Nvidia GPU?

Cheers W_M

Yes Cryptonite V7 is supported in HiveOS.

I have HiveOS on two DL580 G7 Rigs currently doing 5.17 KH/s the third Rig will be up and running soon. I am using XMR-Stak (Version 2.4.2) miner in HiveOS (Version 0.5-41) and it is running on all the processor cores and currently four Nvidia GTX 750 GPUs (will be nine when 10-pin PCIe power cables come in from China).

XMR-Stak can mine on CPU Cores, AMD and Nvidia GPUs all at the same time.

[igotek]

Hi, is Cryptonite V7 supported on HiveOS. There is a miner integrated in HiveOS for this algo optimized for Nvidia GPU?

Cheers W_M

Yes Cryptonite V7 is supported in HiveOS.

I have HiveOS on two DL580 G7 Rigs currently doing 5.17 KH/s the third Rig will be up and running soon. I am using XMR-Stak (Version 2.4.2) miner in HiveOS (Version 0.5-41) and it is running on all the processor cores and currently four Nvidia GTX 750 GPUs (will be nine when 10-pin PCIe power cables come in from China).

XMR-Stak can mine on CPU Cores, AMD and Nvidia GPUs all at the same time.

could you share wallet&pool details for nvidia, pls  ?

[bumbu100]

ccminer supported in second mining screen?

[tristan-speccy]

0.5-42
- lolminer 0.33
- xmrig v2.6.0-beta2
- Fixed CPUs count for xmr-stak

[tristan-speccy]

0.5-43
- sgminer-gm 5.5.6, cryptonight v7 support, set "monero": "true" in wallet config

[clems]

On the new hive web I can't find CHANGELOG between various version of Hive like it was on the old web. It was very important. Where can I find it now?

https://hiveos.farm/changelog/

[Teress]

On the new hive web I can't find CHANGELOG between various version of Hive like it was on the old web. It was very important. Where can I find it now?

https://hiveos.farm/changelog/

Thanks, on FB someone pointed me to there. I must be blind today

[Teress]

Hi Devs, I have no idea what are you changing in hive versions in nvidia drivers, some underlying files or I don't know where. But versions above 5.32-5.36 are crashing my rigs. I use always the same version of ethminer (I manually replace your ethminer version), but the only stable version of Hive is old 5.32. In changelogs you wrote nothing about changing anything related to nvidias, only new miners. In newer versions of Hive nvidias behave unpredictable, rigs crashing without any warning or error message. I would like to use new versions, but I have to use 5.32 as it is the only stable version. Tested lot of weeks on P106-100, GTX 1060 3GB and 6GB, all behave the same. And my clients reports the same, old 5.32 rigs are fine, on newer version they had to dramatically reduce or absolutelly change OC to stay a bit stable. So something must changed

[WaveRiderx]

any update on eta for Nvidia Fan Control feature?

[nitrobg]

any update on eta for Nvidia Fan Control feature?

Two weeks.

[QTVbot]

is vega 64 running on hiveos ?
https://the.hiveos.farm/files/oclist.php?id=12074 look like it's possible but is it easy ?

[blackenedvoodoo]

any update on eta for Nvidia Fan Control feature?

I don't have any problem controlling fans on my nVidia cards

[MinersRus]

any update on eta for Nvidia Fan Control feature?

I don't have any problem controlling fans on my nVidia cards

Not only does HiveOS not control the fans on GTX 750's Overclock also does not work. Any changes made do nothing. If I want to OC or change fans I have to do it manually on each Rig which is a pain.

[WaveRiderx]

any update on eta for Nvidia Fan Control feature?

Two weeks.

That would be fantastic. new settings of; min speed, max speed, and target temp would be awesome.