MinersRus
Member
Offline
Activity: 214
Merit: 24
|
|
April 20, 2018, 11:18:57 PM Last edit: April 21, 2018, 05:20:41 PM by MinersRus |
|
You should change it on the rig's page also. In admin. In server urls dialog I am on the FREE version of HiveOS with my three rigs. I have looked on the Rigs page and everywhere else and nowhere do I see "admin" or "server urls dialog". Is that only available on the paid version? I got over the original issue by installing the latest HiveOS image 0.5-45. When starting it picked as the default " https://api.hiveos.farm". It then updated itself to 0.5-46 and asked for Rig number and password. It downloaded the proper configuration and is mining great using XMR-Stak for GPUs and CPUs on nanopool. With that done I thought that HiveOS ( https://the.hiveos.farm/a/profile/rigs) would show that is is back online. But that is not the case it still shows that it is offline. I cleared the browser cache and logged out then back into HiveOS but the offline issue still persists. The HiveOS Rigs page shows the proper version 0.5-46 (which it had to get from the physical rig) also when the first run was done (Rig number, password) the rig communicated with the hive server to get the proper configuration for XMR-Stak. So communication is working between the rig and HiveOS servers but the stubborn RED Rig OFFLINE is always present. Any ideas on how to fix this? --------------------------- EDIT: 04/21/18 Problem was finally resolved today. Running net-test on the rig now does not show https://api.hiveos.farm:41282 at all. In booting rig it still showed that it was failing to connect to https://api.hiveos.farm:41282. I then ran firstrun -f and used the default https://api.hiveos.farm. Rebooting rig now has the problem solved. Rig uses the https://api.hiveos.farm and now shows that it is ONLINE.
|
|
|
|
WaveRiderx
Member
Offline
Activity: 168
Merit: 39
|
|
April 21, 2018, 12:06:06 AM |
|
do we have to install the new images fresh or can we just click update?
|
|
|
|
CryptoDocker
Jr. Member
Offline
Activity: 122
Merit: 1
|
|
April 21, 2018, 01:17:26 AM |
|
do we have to install the new images fresh or can we just click update?
Update if you are coming from an older build and image if its a fresh install
|
|
|
|
MinersRus
Member
Offline
Activity: 214
Merit: 24
|
|
April 21, 2018, 02:05:45 AM Last edit: April 21, 2018, 05:22:32 PM by MinersRus |
|
do we have to install the new images fresh or can we just click update?
Update if you are coming from an older build and image if its a fresh install The image and the update are not the same: 0.5-45 IMAGE RELEASE 2018-04-19 Logs are OFF by default Linux 4.13 kernel Installed ROCm with AMD driver to support Vega Configs partition is now NTFS Intel's E1000E updated network driver by default 0.5-45 2018-04-17 NEW: cpuminer-opt ethminer 0.14 and 0.15 in the box, version can be selected in the wallet amdmeminfo updated Do an image install if you want to be on Linux 4.13. If you do the update only you will still be on 4.10
|
|
|
|
LESKO
Newbie
Offline
Activity: 9
Merit: 0
|
|
April 21, 2018, 08:23:38 AM |
|
How to undervolt in Hive?
I have 6 rig with Sapphire RX 580 GB Pulse, and one rig in Windows 10 consumes about 760W, in Hive sam rig consumes 980-1020W.
|
|
|
|
ctlst
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 21, 2018, 04:47:20 PM |
|
do we have to install the new images fresh or can we just click update?
Update if you are coming from an older build and image if its a fresh install The image and the update are not the same: 0.5-45 IMAGE RELEASE 2018-04-19 Logs are OFF by default Linux 4.13 kernel Installed ROCm with AMD driver to support Vega Configs partition is now NTFS Intel's E1000E updated network driver by default 0.5-45 2018-04-17 NEW: cpuminer-opt ethminer 0.14 and 0.15 in the box, version can be selected in the wallet amdmeminfo updated I wonder how good vegas work on this vs windows
|
|
|
|
MinersRus
Member
Offline
Activity: 214
Merit: 24
|
|
April 21, 2018, 05:48:18 PM |
|
do we have to install the new images fresh or can we just click update?
Update if you are coming from an older build and image if its a fresh install The image and the update are not the same: 0.5-45 IMAGE RELEASE 2018-04-19 Logs are OFF by default Linux 4.13 kernel Installed ROCm with AMD driver to support Vega Configs partition is now NTFS Intel's E1000E updated network driver by default 0.5-45 2018-04-17 NEW: cpuminer-opt ethminer 0.14 and 0.15 in the box, version can be selected in the wallet amdmeminfo updated I wonder how good vegas work on this vs windows I'm going to let others try first. One thing you need to be aware of is that the Vega's must be installed in x16 slots. Risers won't work. I do have a HP DL580 G7 that qualifies so I will keep a lookout for results.
|
|
|
|
gameboy366
Jr. Member
Offline
Activity: 252
Merit: 8
|
|
April 21, 2018, 07:32:47 PM |
|
Can anyone tell me what's the problem ? Currently I am mining ETH on 12*1050ti but whenever I try to mine another coin using ccminer, I can't run it stably at full speed. It starts giving the error "miner cool down" something like that. Please help.
|
|
|
|
mariorainy
Newbie
Offline
Activity: 12
Merit: 0
|
|
April 23, 2018, 07:04:20 PM |
|
hi
i got problem in hive os Rx cards unknown , this could do lower hashrates..
00:02.0 Intel Corporation Device 5902 (rev 04) 01:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 03:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 04:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 05:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 06:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 07:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102
|
|
|
|
shereenkhan120
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 23, 2018, 07:13:08 PM |
|
I have been successfully using claymore on Windows 10 for 3 months. However, I wanted to switch to Linux for the sake of stability. I tried both HiveOS and SimpleOS. However, apparently claymore connects to ethermine and then the shares get rejected and it disconnects and tries again. It was exactly the same result in both HiveOS and SimpleOS. I also tried to start the miner manually myself, in order to rule out the possibility that it might be due to some bad config, however, it was still the same result. Here is the screenshot: https://ibb.co/ncW5wxI would really appreciate any input on this.
|
|
|
|
minkuluk
Newbie
Offline
Activity: 11
Merit: 0
|
|
April 25, 2018, 03:44:57 AM |
|
please add xmr-aeon-stak for mining cryptonight heavy..
Thank You so much..
|
|
|
|
solarsolar99
Newbie
Offline
Activity: 17
Merit: 0
|
|
April 25, 2018, 01:25:39 PM |
|
|
|
|
|
Vilonosec
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 26, 2018, 02:35:36 PM |
|
|
|
|
|
bileq
Legendary
Offline
Activity: 1274
Merit: 1068
|
|
April 26, 2018, 05:04:29 PM |
|
hi
i got problem in hive os Rx cards unknown , this could do lower hashrates..
00:02.0 Intel Corporation Device 5902 (rev 04) 01:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 03:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 04:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 05:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 06:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102 07:00.0 Unknown GPU 1002-67ffref 4096M Micron MT51J256M3, 115-C994PI0-102
same problem.. one of my rig samsung memory gpus looking micron unknown. i have 2 rig with same gpus one rig normal on second rig looks 1 gpu with samsung all others with micron memory. but all of them have samsung memory. i will reinstall hiveos to my usb drive tomorrow. maybe it will fix this issue.
|
|
|
|
gameboy366
Jr. Member
Offline
Activity: 252
Merit: 8
|
|
April 26, 2018, 07:57:43 PM |
|
When I try to mine verge x17 i get this error. I can successfully mine on lyra2v2 but not on x17. My rig is 12*1050ti I keep getting this error - https://prnt.sc/ja9j1l (screenshot) Help please.
|
|
|
|
|
MinersRus
Member
Offline
Activity: 214
Merit: 24
|
|
April 27, 2018, 04:31:38 PM |
|
It isn't. Babbling your nonsense in multiple forums doesn't make it so.
|
|
|
|
HydrogenBombaklot
Newbie
Offline
Activity: 3
Merit: 0
|
|
April 27, 2018, 04:57:25 PM |
|
It isn't. Babbling your nonsense in multiple forums doesn't make it so. Perhaps you would speak to why Avast thinks it is?
|
|
|
|
CryptoDocker
Jr. Member
Offline
Activity: 122
Merit: 1
|
|
April 28, 2018, 06:59:13 AM |
|
It isn't. Babbling your nonsense in multiple forums doesn't make it so. Perhaps you would speak to why Avast thinks it is? Most mining software (not hive itself) triggers all sorts of malicious warning with anti virus programs its normal. Hive OS does not contain a trojan
|
|
|
|
tospaa
Newbie
Offline
Activity: 1
Merit: 0
|
|
April 28, 2018, 07:59:52 AM |
|
Im new at Hiveos,
--win 10 64 bit Claymore dual, ETH only, sapphire rx550 4 gb, 12.000-13.000 h/s x 4 + MSI rx560 4gb, 15.200 h/s x1 = 65.000 h/s 445 watt OTW / downvolt ---- 60.500 h/s 360 watt
--Hiveos - Claymore dual, ETH only, sapphire rx550 4 gb, 11.500 h/s x 4 + MSI rx560 4gb, 15.300 h/s x2 = 76.200 h/s 480 watt OTW / no reasonable downvolt
Im using Hiveos because when i added sixth card (msi rx560) windows got problems with it that i cant solve. I have unplugged the card and go back five cards but problems still continue. So im using hiveos
but its using more power than Windows and thats not good.
MSi Afterburner is not working with my win 10, i used TRIXX.
|
|
|
|
|