mkxminer: Fast Lyra2Z/Lyra2rev2 miner for AMD GPU (ZCoin, GINcoin, VERT, MONA...

[StarLordRammi]

Folder contains Trojan virus

Which one? A bit more details please?

Such accusations usually must be supported by some proof, don't you think?

You can see the virustotal report here: https://www.virustotal.com/#/file/95775819a5a960c233a23603055de8dabbb87d99c33efc129062848b05a0def5/detection

can someone tell me how do you actually mine XVG with this? it says Verge is title but no pool is listed, or settings for config file
i have RX580 8GB

Work fine for me:
@echo off
TIMEOUT 30
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

mkxminer.exe --exitsick --asm -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u DQk6xNzxzD6RwFaqmGrTM8QkKsJKXinEDg -p c=XVG -I 23

my drivers crash as soon as it says connected. if i try again then everything freezes and i have to hard shut down PC.

tried -I 19 and same issue

[1714472272]

1714472272

[1714472272]

1714472272

[1714472272]

1714472272

[gregfromo]

nice miner, getting 31,6Mh/s on my RX580, but those 6x RX580 now drawing ~1000W from wall.

[Jackkyy]

whats you hash with VEga64?

not good choice mining etn - sell and buy other

[kevarms]

Folder contains Trojan virus

Which one? A bit more details please?

Such accusations usually must be supported by some proof, don't you think?

You can see the virustotal report here: https://www.virustotal.com/#/file/95775819a5a960c233a23603055de8dabbb87d99c33efc129062848b05a0def5/detection

can someone tell me how do you actually mine XVG with this? it says Verge is title but no pool is listed, or settings for config file
i have RX580 8GB

Work fine for me:
@echo off
TIMEOUT 30
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

mkxminer.exe --exitsick --asm -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u DQk6xNzxzD6RwFaqmGrTM8QkKsJKXinEDg -p c=XVG -I 23

my drivers crash as soon as it says connected. if i try again then everything freezes and i have to hard shut down PC.

tried -I 19 and same issue

add a            pause                  on the next line and it should work     or at least pause so you can see the problem

[StarLordRammi]

Folder contains Trojan virus

Which one? A bit more details please?

Such accusations usually must be supported by some proof, don't you think?

You can see the virustotal report here: https://www.virustotal.com/#/file/95775819a5a960c233a23603055de8dabbb87d99c33efc129062848b05a0def5/detection

can someone tell me how do you actually mine XVG with this? it says Verge is title but no pool is listed, or settings for config file
i have RX580 8GB

Work fine for me:
@echo off
TIMEOUT 30
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

mkxminer.exe --exitsick --asm -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u DQk6xNzxzD6RwFaqmGrTM8QkKsJKXinEDg -p c=XVG -I 23

my drivers crash as soon as it says connected. if i try again then everything freezes and i have to hard shut down PC.

tried -I 19 and same issue

add a            pause                  on the next line and it should work     or at least pause so you can see the problem

still same issue, after connecting it crashes drivers, i am using latest official drivers, stock bios on card.

[kevarms]

Folder contains Trojan virus

Which one? A bit more details please?

Such accusations usually must be supported by some proof, don't you think?

You can see the virustotal report here: https://www.virustotal.com/#/file/95775819a5a960c233a23603055de8dabbb87d99c33efc129062848b05a0def5/detection

can someone tell me how do you actually mine XVG with this? it says Verge is title but no pool is listed, or settings for config file
i have RX580 8GB

Work fine for me:
@echo off
TIMEOUT 30
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

mkxminer.exe --exitsick --asm -o stratum+tcp://lyra2v2.mine.zpool.ca:4533 -u DQk6xNzxzD6RwFaqmGrTM8QkKsJKXinEDg -p c=XVG -I 23

my drivers crash as soon as it says connected. if i try again then everything freezes and i have to hard shut down PC.

tried -I 19 and same issue

add a            pause                  on the next line and it should work     or at least pause so you can see the problem

still same issue, after connecting it crashes drivers, i am using latest official drivers, stock bios on card.

Ya actually i remember trying that pool and i couldn't get it to work..... i will give it a go again later and see if i can help./..

[Dark12]

Anyone mining with a Fury and getting over 35 MH?

If so, what are your settings?

[Branko]

Anyone tried it with Galactrum (ORA), and what pool, if you succeeded?

It still looks very profitable:


https://www.crypto-coinz.net/coin-info/?45-Galactrum-ORE-Lyra2v2-calculator/

[Albono]

Hello, the miner is running fine on 2 of my rigs, but by one i get a error " 0xc00007b " by starting the miner,
can someone help me , thanx ,

Albi

[doktor83]

Hello, the miner is running fine on 2 of my rigs, but by one i get a error " 0xc00007b " by starting the miner,
can someone help me , thanx ,

Albi

install C++ redistributable 2013 x86

[sawa]

Hi. What is a good driver for windows 7.
It is a pity that p2pool-vtc does not work ;_( When linux version?
Thanks
 

Version working with ANY pools will be released within 48 hours.

Linux - possibly by end of December

It may not work on the p2pool for two reasons:
- all p2pools don't supported extranonce options and you need an option in mkxminer to disable extranonce;
- P2pool needs large stratum.notify messages in order to be able to transmit the large coinbase transactions. Large coinbases are fundamental to the security design of p2pool, so there's nothing that we can do about it on the pool end. https://bitcointalk.org/index.php?topic=18313.msg26571959#msg26571959

I do not know for any specific reason, but really the mkxminer does not work with p2pools

[gsanjin]

Anyone tried it with Galactrum (ORA), and what pool, if you succeeded?

It still looks very profitable:


https://www.crypto-coinz.net/coin-info/?45-Galactrum-ORE-Lyra2v2-calculator/

Pozdrav Branko,

It works. I use http://bsod.pw pool for Galactrum (largest hashrate). Use this way:

Code:

mkxminer.exe -o stratum+tcp://pool.bsod.pw:1982 -u wallet_address -p c=ORE -I 20 --asm

Watch your intensity for temperature and power draw. One of my 280x is overheating when used with intensity 21, others are working ok.

[kevarms]

Yep the miner is great ... not super stable yet.  BUT with basically stock settings i am getting 38m/h on my rx580 and 35 on my rx570's   with the -asm code and thats it. 

[oddity2505]

Yep the miner is great ... not super stable yet.  BUT with basically stock settings i am getting 38m/h on my rx580 and 35 on my rx570's   with the -asm code and thats it. 

Could you clarify what do you mean by "basically stock"? Cause I am getting 31-32 MH/s on my RX570 (-asm -I 23) at stock 1250 MHz core clock consistent with others in this thread.

[Romulus2k17]

Love the miner! All that's left now is to add API support, and this thing will be complete!

If API support is added, I'll be happy to support the author with a day's mining on a measly HD 7950 that I currently posses.

[alucard20724]

yeah... api support would be awesome to have

[Albono]

Hello, the miner is running fine on 2 of my rigs, but by one i get a error " 0xc00007b " by starting the miner,
can someone help me , thanx ,

Albi

install C++ redistributable 2013 x86

Thanks it works 

[gsanjin]

Proper card ordering is necessary also. In 3 ATI cards rig (2x 280x, 1x 290x) temperatures and hasrates are shown differently. I also dont know is intesity setting applied separately for each card, for example -I 20,20,21.

Anyway, lyra2v2 performances with this miner are great, dev deserves every cent from devfee.

[kevarms]

Yep the miner is great ... not super stable yet.  BUT with basically stock settings i am getting 38m/h on my rx580 and 35 on my rx570's   with the -asm code and thats it. 

Could you clarify what do you mean by "basically stock"? Cause I am getting 31-32 MH/s on my RX570 (-asm -I 23) at stock 1250 MHz core clock consistent with others in this thread.

i mean no fixed bios on the cards no messing around with after burner ...  blockchain drivers and regular generic bios....  i did exactly the same as you with my 570  -asm and -i23     slowed down the memory to 1250 and left the clock speed whereever it was....  getting 34h/s on my 570 atm.......  37h/s on the 580  same rig same setting

[kevarms]

Proper card ordering is necessary also. In 3 ATI cards rig (2x 280x, 1x 290x) temperatures and hasrates are shown differently. I also dont know is intesity setting applied separately for each card, for example -I 20,20,21.

Anyway, lyra2v2 performances with this miner are great, dev deserves every cent from devfee.

I definately agree and easy setup too!!!  wonder what other algo this dev can put out !!!!