[ANN] Infinitecoin (IFC) pool-Treasurequarry.com. 1.5% fee. P2pool Europe server

[TreasureSeeker]

You can't go by the "accepted" figures on your miner.  These are pseudo shares (if you're using a +number after your ICF address as recommended), not real shares. You only get credited when you find a real share.

From the bitcoin p2pool wiki

Q: Why does my miner say it has found a lot of shares but p2pool say I have only found a few?!
A: The real P2Pool difficulty is hundreds of times higher than on normal pools, but p2pool essentially lies to your miner and tells it to work on relatively easy shares so that it submits shares every few seconds instead of every few hours. P2Pool then ignores any submitted shares that don't match the real share difficulty. By doing this, P2Pool can more accurately report your local hash rate and you can see if you are having problems with too many stale shares quickly

dustofdeath, I've replied to your query in the infinitecointalk forum where you posted at http://infinitecointalk.org/index.php/topic,487.0.html

d7o1n4, how fast is your miner reporting it's mining at and what percentage efficiency is it showing?  The graphs seem to indicate your mining around 1kh/s to 3 kh/s. At a  rate of 2kh/s and with a share difficulty at the pool of 0.255 as I write this, it will take around 6.34 days between you finding each share and therefore getting each run of payments for a share.

[dustofdeath]

on full intensity its mining at 347khs. at lowe i its down to 300.

It worked fine the day before.  at i13 i get ~300khs and WU of 320
Runnign for roughly 2 min i get:
A 931 R 57 HW 0 WU 320  ST 2 SS 0 NB 8 LW 115 GF 0 RF 0
when i closed it yday i had at least 14k shares accepted.

Ill run it again today for a hour and see if it works.

[dustofdeath]

pools down?
-_-  saw massive amoutns of rejects and no new payments... then restarted and it wont connect anymore and site wont load.

[TreasureSeeker]

Sorry for the downtime.  On noticing it I added extra resources to the server but it refused to reboot so I had to contact the support guys at the hosting company to eventually get it to reboot.

After rebooting I noticed a very high server load and that a certain IP from Canada seemed to have quite a large amount of connections to the server.  I think I've set IPtables to drop that particular IP now.  I'm not great at IPtables but hopefully this is working....server load is down now anyway.

[Hippie Tech]

You can't go by the "accepted" figures on your miner.  These are pseudo shares (if you're using a +number after your ICF address as recommended), not real shares. You only get credited when you find a real share.

From the bitcoin p2pool wiki

Q: Why does my miner say it has found a lot of shares but p2pool say I have only found a few?!
A: The real P2Pool difficulty is hundreds of times higher than on normal pools, but p2pool essentially lies to your miner and tells it to work on relatively easy shares so that it submits shares every few seconds instead of every few hours. P2Pool then ignores any submitted shares that don't match the real share difficulty. By doing this, P2Pool can more accurately report your local hash rate and you can see if you are having problems with too many stale shares quickly

dustofdeath, I've replied to your query in the infinitecointalk forum where you posted at http://infinitecointalk.org/index.php/topic,487.0.html

d7o1n4, how fast is your miner reporting it's mining at and what percentage efficiency is it showing?  The graphs seem to indicate your mining around 1kh/s to 3 kh/s. At a  rate of 2kh/s and with a share difficulty at the pool of 0.255 as I write this, it will take around 6.34 days between you finding each share and therefore getting each run of payments for a share.

Post a link to said wiki.

and.. rename the pool to.. WEwasteYOhashes dot com.

[jhdobbins]

Using GUIminer - v2012-12-03

I set the system up as: 

http://i1346.photobucket.com/albums/p699/joshdobbins/treasureQ_zpsb45a452a.jpg

But when I try to run the miner, it doesn't connect.

The response on the console is:

2013-12-04 21:36:17: Running command: C:\Users\Hobet Electrical\Downloads\guiminer\cgminer.exe -u mywalletaddress -p password -o http://treasurequarry.com:9844 -d 0 -l 1 -T

And it doesn't mine.  Any help would be great!

Thanks!

[infordani]

today it is broken or what?
Im not recieving any IFC for all the work iv done.

http://exploretheblocks.com:2750/address/iQsMmBf2AGTxCG9tXwS2oAnY2uEK5mbo5M


Balance: 2955.01971517 IFC
Transactions in: 76
Received: 2955.01971517 IFC
Transactions out: 0
Sent: 0 IFC

I HAVE NOT RECEIVED NOTHING


I have not received any infinitecoin in my wallet, the will I receive? when?
Someone who knows what happens to answer me please

[Kergekoin]

Pool is currently broken and has pretty much 0 hash rate. You can follow it by looking pool stats:

http://treasurequarry.com:9844/static/index.html


Theres another p2p pool, but this one is at wrong block and has no hash rate either.

http://p2pool.org:20775/static/


So infinitecoing mining possibilities in p2p are limited for now.

[dustofdeath]

and solo mining is impossible... great -_-

[infordani]

and solo mining is impossible... great -_-

but even within one week we charge what we have not mined?

I have this now:

Balance: 2961.64494842 IFC
Transactions in: 85
Received: 2961.64494842 IFC
Transactions out: 0
Sent: 0 IFC

That I have not mined it send me?

[Franc[e]sco]

I mined for a few hours and it worked pretty great. The payments arrived hours later but I guess it's pretty normal.
After a few hours either my connection or the pool started being sluggish so I had to stop. But it was probabilly because I had 4 cryptocurrencies syncing at the same time.

Great pool though, functional and simple to use!

Also, after mining in the pool for a bit I solo mined for fun at 200 KH/s for 2 hours and found a block! I have like 18k IFC now

[Kergekoin]

Yes. Pool is working again.

[TreasureSeeker]

Apologies for whatever may have happened today.  I've got suspicions that the pool may have been under attack and, if so, strong suspicions of who may be the culprit. I wasn't at the computer at the time the massive DOA occurrences happened though, so wasn't able to check anything in real time.  However the logs do show someone doing something which could, in theory, cause problems.  I'll try to add a few lines of code to the p2pool source code in the next few hours which may help and will give more info then.  It'll be my first time writing a bit of functional Python code so "fingers crossed" that it'll work.

[infordani]

Apologies for whatever may have happened today.  I've got suspicions that the pool may have been under attack and, if so, strong suspicions of who may be the culprit. I wasn't at the computer at the time the massive DOA occurrences happened though, so wasn't able to check anything in real time.  However the logs do show someone doing something which could, in theory, cause problems.  I'll try to add a few lines of code to the p2pool source code in the next few hours which may help and will give more info then.  It'll be my first time writing a bit of functional Python code so "fingers crossed" that it'll work.

are you telling us that happens, and we won coins and they have not given us recover??

Balance: 3511.93977278 IFC
Transactions in: 108
Received: 3511.93977278 IFC
Transactions out: 0
Sent: 0 IFC

[TreasureSeeker]

If I can understand your question correctly the answer is no, infordani , you may not have won many coins between about 2AM to about 5.30PM today because of the high DOA rate.

I've added a few extra lines to the P2Pool's python code now to make the minimum pseudo-share difficulty 0.00000582 .  This may help to reduce the problems we've been experiencing. Anyone choosing a lower pseudo-share difficulty will report 0.00000582 difficulty pseudo-shares.

[alfaz12]

I am actually mining IFC (infinitecoins) using CPUMiner on one of my Core2Duo Laptop Machine ,my pool is http://www.treasurequarry.com/ using the following command minerd -o http://treasurequarry.com:9844 -u YOURINFINITECOINADDRESS -p x ,changed where its written "YOURINFINITECOINADDRESS" I chaned it with my IFC Wallet Address that generated in the IFC Wallet interface on my current laptop. its going alright right now ,I mean I have just started it, mining at around 5KH/S so let's see how it goes.

Now I want to Mine on another Core2Duo Laptop and a Dual Core CPU , So the thing is am I going to use the same IFC Wallet address over here (minerd -o http://treasurequarry.com:9844 -u YOURINFINITECOINADDRESS -p x) which was generated by current machine, or am I going to install a new InfiniteCoin Wallet Interface to generate a new address to recieve coins on other Machines or can work with the same Infinite Wallet address code that I am using on my current laptop to Mine or recieve coins.

Also I have started Mining only 12 Hours ago so how much time will take to coins to be deposited in my IFC Wallet.

Also its written on http://www.treasurequarry.com/ that "To maximise your efficiency and get a good representation of your hashrate on Treasure Quarry's graphs, add the following to your Infinitecoin address (including the + sign,  and without any spaces between your Infinitecoin address and the + sign). Just find the nearest hashrate to your own mining speed from this table:

Hashrate in KHash/s
Difficulty to append to YOURINFINITECOINADDRESS
1
+0.00000116
5
+0.00000582
10
+0.00001164
50
+0.00005821
100
+0.00011641
250
+0.00029103
500
+0.00058207
750
+0.00087310
1000
+0.00116414

For example if your mining speed is 90 KHash/s, use:
 
minerd -o http://treasurequarry.com:9844 -u YOURINFINITECOINADDRESS+0.00011641 -p x ."

So what do they mean by this , I am not able to understand , my current hash rate is 5kh/s on one machine , other I will know when I will mine on other machines.

 am a newbie so wanted someone to help on this query.
 
Please Help.!     . Thankyou ...! ,

[dustofdeath]

at 5khs you most likely wont see any payments at all.. or rarely.

This is a very low hashrate.

Integrated gpu on the laptop could most likely do better then that.
at that speed you may make 50 ifc/hour if lucky.

[peb0t]

We need more miners to improve pool's hashrate. I love this pool but it would be better with 20 mhash.

[alfaz12]

at 5khs you most likely wont see any payments at all.. or rarely.

This is a very low hashrate.

Integrated gpu on the laptop could most likely do better then that.
at that speed you may make 50 ifc/hour if lucky.

well I recieved a Balance of 292 IFC confirmed just now, currently Mining at 5KH/s

Now I want to Mine on another Core2Duo Laptop and a Dual Core CPU , So the thing is am I going to use the same IFC Wallet address over here (minerd -o http://treasurequarry.com:9844 -u YOURINFINITECOINADDRESS -p x) which was generated by current machine, or am I going to install a new InfiniteCoin Wallet Interface to generate a new address to recieve coins on other Machines or can work with the same Infinite Wallet address code that I am using on my current laptop to Mine or recieve coins.

Also I have started Mining only 12 Hours ago so how much time will take to coins to be deposited in my IFC Wallet.

Also its written on http://www.treasurequarry.com/ that "To maximise your efficiency and get a good representation of your hashrate on Treasure Quarry's graphs, add the following to your Infinitecoin address (including the + sign,  and without any spaces between your Infinitecoin address and the + sign). Just find the nearest hashrate to your own mining speed from this table:

Hashrate in KHash/s
Difficulty to append to YOURINFINITECOINADDRESS
1
+0.00000116
5
+0.00000582
10
+0.00001164
50
+0.00005821
100
+0.00011641
250
+0.00029103
500
+0.00058207
750
+0.00087310
1000
+0.00116414

For example if your mining speed is 90 KHash/s, use:
 
minerd -o http://treasurequarry.com:9844 -u YOURINFINITECOINADDRESS+0.00011641 -p x ."

So what do they mean by this , I am not able to understand , my current hash rate is 5kh/s on one machine , other I will know when I will mine on other machines.

 am a newbie so wanted someone to help on this query.
 
Please Help.!  Smiley   . Thankyou ...! ,

[alfaz12]

at 5khs you most likely wont see any payments at all.. or rarely.

This is a very low hashrate.

Integrated gpu on the laptop could most likely do better then that.
at that speed you may make 50 ifc/hour if lucky.

Also My Integrated gpu is of intel and GUIMiner Script is only for amd ati radeon and cuda for nvidia so I think I can't mine with this GPU, so i am using cpu miner , dts why i am planning to use more machine currently using one.

Now do we get external GPUs will they work.