[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[george2019]

well 14.3 VS 14.0:

https://i.imgur.com/u6atqRa.png

https://i.imgur.com/qglZGxH.png

with following settings : TDP70%:
3X1080 EVGA FTW core oc -50 memory oc +500 (core operates around 1900MHZ using second bios)
1X1080 MSI gamer x core oc 0 memory oc +500 (core operates around 1800MHZ)
1X 1080Ti zotac amp core oc +120 memory oc +500 (core operates around 1700MHZ)

https://i.imgur.com/27bDGQD.jpg

pagefile 32gb on 60gb ssd (10gb free space)

i mined on f2pool and daily average recorded hashrate was 31g/sec

CPU usage is still quite big even with latest build but hashrate dropped, 14.0 build has around 50% cpu usage on my rig, but hashrate is higher than newer builds, rejected shares was around 0.8% daily, using latest nvidia drivers

[1715263609]

1715263609

[1715263609]

1715263609

[1715263609]

1715263609

[arielbit]

c31 on win7 (1080ti's)

3 card rig ~0.7 to ~0.8 (per card)

2 card rig ~0.98  (per card)

1 card rig ~1.33  (per card)

[yuzuak]

@realbminer 8 gb c31 please

[UnclWish]

Will miner support c29 and c31 for AMD cards? Nicehash?

[RivAngE]

No answer on the error?

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

Yes, I'm using Windows 10, but with 11GB from the GPU and the used memory being less than 500MB before the miner starts, there shouldn't be a problem.

[Newton90]

what bminer fee when mining aeternity?

[BogdanCo]

Still around 33% rejected shares with 1080ti on cuckatoo31 using bminer v14.3.0.

[Grim]

This is an important point to note as Cuckatoo31 requires 14GB of GPU memory to accurately solve a graph cycle.
Nvidia GPU’s with "only" 11GB use a memory overflow optimization to solve Cuckatoo31 graphs, but that reduces actual mining performance by 30%.

[GustDK]

@RealBminer
you could put in the next update that shows the ms connection to the pool, it is very helpful

[r0ver2]

Still around 33% rejected shares with 1080ti on cuckatoo31 using bminer v14.3.0.

Same here, works fine on 2080Ti - but not my 1080Tis

[provenceday]

getting 2.12 GPS on 2080Ti card.


but a lot of rejected shares.

and miner is not very Stable too.

[luckydoky]

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

[provenceday]

very high rejected rate on 2080Ti, like 40% been rejected?

[provenceday]

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

on windows?

[badfad]

No answer on the error?

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

Yes, I'm using Windows 10, but with 11GB from the GPU and the used memory being less than 500MB before the miner starts, there shouldn't be a problem.

Same issue here.

[provenceday]

No answer on the error?

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

Yes, I'm using Windows 10, but with 11GB from the GPU and the used memory being less than 500MB before the miner starts, there shouldn't be a problem.

Same issue here.

Linux works here, but with pretty high rejected shares, like 30%-40% shares been rejected.

[luckydoky]

For me it won't even start on cukatoo31 with a 2080ti

[FATA] [2019-02-09T16:37:09+01:00] Insufficient memory 9028.42 MB available on device (#0). Unable to run the solver

2 gps sounds good though, I get ~1.5 with gminer

on windows?

Yes windows (10), might be why.

[r0ver2]

Works good on linux with my 2080Ti

[INFO] [2019-02-09T17:28:49 01:00] [GPU 0] Speed: 2.15 G/s Fidelity 0.976 Temp: 1C Fan: 1% Power: 1W 2.15 G/J
[INFO] [2019-02-09T17:28:49 01:00] Total 2.15 G/s Accepted shares 283 Rejected shares 7

With 1080Ti I get 35-50% rejected so basically gets 0.6-0.8 on pool with 1.2-1.3 in miner. Would love to get it to work, as that would rock.

my 2080Ti are alone, with better cpu and more ram, while my 1080Tis are rigs (1x6 gpu and 1x12 gpu, same happens with both) on celeron and 8 gb rams - so that may be something about the problem

[dragonmike]

What pool(s) are you getting rejected shares on?

[r0ver2]

What pool(s) are you getting rejected shares on?

I am using f2pool, and works fine with my 2080Ti, but not with the 1080Ti. Both same pool, some location - so dont think its a pool issue