[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[totikk]

HIVE
5x1080ti

I confirm rejected shares is high!
bminer-ver. 14.3.0
57.06%
A 190
R 143

HIVE
Bminer 14.3

2x1080ti  = 15-20% rejected

3x1080ti  = 28-35% rejected

Miner close and restarts randomly 30-90 minuts (on 14.2 too)
 

[Digital_Seytan]

Bminer shows the hasrate much lower on the web site of ethermine.org 6x 1060 6gb Reported Hashrate Bminer:143.5
Rig1 Reported Hashrate Pool: 22.3 MH / s Current Hashrate 148.1 MH / s

bminer config:

Code:

bminer.exe -no-timestamps -no-runtime-info -share-check 240 -uri ethash: //0xxxxxxxxxxxxxxxxxxxxxxxxxD.rig1@eu1.ethermine.org: 4444

Please help what can i do now

[r0ver2]

HIVE
Bminer 14.3

2x1080ti  = 15-20% rejected

3x1080ti  = 28-35% rejected

Miner close and restarts randomly 30-90 minuts (on 14.2 too)
 

Try another pool!

[JMDan]

Would it be possible to add an option to disable NVML hooking? I can't manage to run the miner on docker...

Failed to initialize the CUDA platform: CudaError: Could not initialize the NVML library

[bakermining76]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

[johny78]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

Hey,

Are you using win10 ?

Im getting

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

on every rig, using win10 and 1080ti's.

[bakermining76]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

Hey,

Are you using win10 ?

Im getting

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

on every rig, using win10 and 1080ti's.

No, I'm using Linux.

[pokeytex]

Is there any guide on how to get bminer working under linux for c31?  I keep getting miner died!  GTX 1080 ti on Ubuntu 18.04.

[Rabinovitch]

I found BMiner 14.3.0 being hung on 2 PCs one with 1 and another with 3 2080Ti, Ubuntu 18.10.

[Karlitosss]

I also get a lot of issues on my 12 GPU rig under HiveOS.

Rejected shares even on Luxor and miner always restart

[UselessGuru]

BMiner.exe -api 127.0.0.1:4002 -uri beam://************************.multipoolminer:x@beam.eu.nicehash.com:3370 -watchdog=false -devices 0

Miner works fine for about 3 minutes and then this:

Code:

...
[INFO] [2019-02-11T10:22:48+01:00] Received new job 1732940736900
[INFO] [2019-02-11T10:22:48+01:00] Accepted share for job #1732940736900
[INFO] [2019-02-11T10:22:49+01:00] Received new job 1732940738578
[WARN] [2019-02-11T10:22:56+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:22:58+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:00+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:05+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:05+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:08+01:00] Rejected share #1732940738578 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T10:23:08+01:00] Get error: Too many rejected shares, resetting in 5 seconds

Windows x64, 1809, Nvidia drivers 418.81

[bourbonmorning]

Win7, 1080ti Asus Strix, 416.94 drivers
Only 0.87 G/s per card on c31,
but 7.12 on c29.

949mv locked,
power limit 120% (working at about 80% average),
core +220 (working at about 1923 mhz)
memory +400 at P0 (working at 5899 mhz) + Pill

[RivAngE]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

Hey,

Are you using win10 ?

Im getting

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

on every rig, using win10 and 1080ti's.

No, I'm using Linux.

Ubuntu or something else???

[bourbonmorning]

v14.3.0 crashing at mining BEAM on 1063 with

[INFO] [2019-02-11T13:37:06+02:00] CUDA error DRIVER: '2' in func 'bminer::equih
ash::legacy::Equihash1505SolverCuda::Initialize' line 59
[FATA] [2019-02-11T13:37:06+02:00] Fatal cuda error in GPU 0. Terminate soon...

Gminer works fine with about 11 sol per card

Win7, 1063 MSI + MSI Gaming, 416.94 drivers
824mv locked,
power limit 100%,
core +170-205 (working at about 1708-1759 mhz)
memory +500 at P0 (working at 4498 mhz)

[sandscorpion]

hi, how can I fix problem with
"Insufficient memory 9177.59 MB available on device (#0). Unable to run the solver"?
Windows 10 and 1080ti's.
Grin31.
On Gminer work ok, but very small graph/s.

[yuzuak]

@realbminer
8 gb c31 please, 8gb cards remained low and no profit left

[Alexdie]

Bminer 14.3.0, alg Beam, nicehash

[WARN] [2019-02-11T18:22:34+05:00] Rejected share #1732947940995 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T18:22:35+05:00] Rejected share #1732947940995 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T18:22:38+05:00] Rejected share #1732947940995 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T18:22:38+05:00] Rejected share #1732947940995 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T18:22:38+05:00] Rejected share #1732947940995 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T18:22:38+05:00] Rejected share #1732947940995 (Invalid nonce; is miner not compatible with NiceHash?)
[WARN] [2019-02-11T18:22:38+05:00] Get error: Too many rejected shares, resetting in 5 seconds

Normal ?

please fix NiceHash mining Beam and cuckARoo29.

[bakermining76]

With v14.3, I'm getting 2.5gps (GRIN31) poolside using two 1080 Tis at +180/+600/85% on F2pool with 1.2% rejected  I found in the past that both sparkpool and grinmint had too high rejected shares, so haven't bothered with them. I did have pretty good luck with Luxor on Grin29 - near 0% rejects, which makes sense because my ping is ~55ms at Luxor compared to ~330ms on F2pool. I'm planning to go back to Luxor after my next F2pool payout.

Hey,

Are you using win10 ?

Im getting

"Insufficient memory 9171.7 MB available on device (#0). Unable to run the solver"

on every rig, using win10 and 1080ti's.

No, I'm using Linux.

Ubuntu or something else???

I'm using SMOS, which I believe is Ubuntu 16.04. Sorry if I confused by reporting the power usage as a percentage instead of watts, but I used my same overclocks from Windows and converted for running SMOS. Right now, I'm running overclocks of +180/+600/225W, which bumped me up to ~2.7gps (combined for 2 1080Ti's). F2pool is showing 2.57gps on the 24h hashrate, but I had the rig off for about an hour during that time, so it's pretty close poolside to what the software reports after accounting for that. I typically use Windows on that rig, but had the same issue you're having with Windows, so I ended up splitting my two 1080Ti's off to their own rig temporarily and switched to SMOS to make it easier to set everything up correctly.

[johny78]

Okay Ive reinstalled to win7 to test 1080ti with bminer 14.3, c31 algo

416.94 drivers

afterburner
powerlimit = stock 100%
mem +600
core +100

with pill or without, doasnt matter
0.45 - 0.55 gps per 1080ti
750-950W at the wall for 6 gpu rig

Why so low hashrate?
And why at 100% plimit such low power?

[msallak1]

hi, how can I fix problem with
"Insufficient memory 9177.59 MB available on device (#0). Unable to run the solver"?
Windows 10 and 1080ti's.
Grin31.
On Gminer work ok, but very small graph/s.

I read somewhere that windows 10 reserve some vram and miner can't use it.
Maybe bminer consumes something close to 11GB vram!