|
MagicSmoker
|
 |
January 26, 2018, 04:54:00 PM |
|
I feel squeezed out as I'm down to around 2 DERO per day with my Ryzen 5 1600 CPU... Switched over to Intensecoin but will keep tabs on the DERO network hashrate. Good luck to the devs and fellow miners; I'm still holding about 272 DERO in total.
Just curious. How many coins are you getting with that CPU on Dero vs Intensecoin per day? I'm doing about 440 H/s on average with this CPU without overclocking but with some tweaking of the xmr-stak cpu.txt file. More specifically, here is the relevant portion from that file in its entirety: "cpu_threads_conf" :
[
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 3 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 4 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 5 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 7 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 9 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 10 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 11 },
],
If you want to maintain usability of the computer for other things then it's very important to not use core 0 / thread 0. Ideally, you want to specify a total number of threads that is 1/2 the L3 cache size in MB; the Ryzen 5 1600 has 16MB of L3 cache so 8 threads are ideal. Right now (and similar to when I made the post you quoted), that 440 H/s can be used to generate less than 2 DERO per day or around 72 ITNS per day. So while I still believe in DERO, I just don't see mining it as a particularly good use of resources at the moment. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
cryptocommoner
Jr. Member
 Offline
Activity: 112
Merit: 5
|
|
January 26, 2018, 05:05:26 PM |
|
I feel squeezed out as I'm down to around 2 DERO per day with my Ryzen 5 1600 CPU... Switched over to Intensecoin but will keep tabs on the DERO network hashrate. Good luck to the devs and fellow miners; I'm still holding about 272 DERO in total.
Just curious. How many coins are you getting with that CPU on Dero vs Intensecoin per day? I'm doing about 440 H/s on average with this CPU without overclocking but with some tweaking of the xmr-stak cpu.txt file. More specifically, here is the relevant portion from that file in its entirety: "cpu_threads_conf" :
[
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 3 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 4 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 5 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 7 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 9 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 10 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 11 },
],
If you want to maintain usability of the computer for other things then it's very important to not use core 0 / thread 0. Ideally, you want to specify a total number of threads that is 1/2 the L3 cache size in MB; the Ryzen 5 1600 has 16MB of L3 cache so 8 threads are ideal. Right now (and similar to when I made the post you quoted), that 440 H/s can be used to generate less than 2 DERO per day or around 72 ITNS per day. So while I still believe in DERO, I just don't see mining it as a particularly good use of resources at the moment. THANK YOU! I will look into making those changes that you listed. |
|
|
|
|
ARTRN
Newbie
Offline
Activity: 63
Merit: 0
|
|
January 27, 2018, 12:43:24 AM |
|
Hi, I've been mining on official pool for about couple of hours with a steady hash rate of about 3.6 kh/s. My question is why my pending balance is still 0 ?. Can someone enlighten me about this? TIA.
|
|
|
|
|
--Serena--
Member
Offline
Activity: 224
Merit: 11
|
|
January 27, 2018, 12:50:15 AM |
|
Hi, I've been mining on official pool for about couple of hours with a steady hash rate of about 3.6 kh/s. My question is why my pending balance is still 0 ?. Can someone enlighten me about this? TIA.
It will take 2.5 - 3 hours for your pending balance to show up but payments will be every 30 minutes after that |
|
|
|
|
ARTRN
Newbie
Offline
Activity: 63
Merit: 0
|
|
January 27, 2018, 12:53:33 AM |
|
Hi, I've been mining on official pool for about couple of hours with a steady hash rate of about 3.6 kh/s. My question is why my pending balance is still 0 ?. Can someone enlighten me about this? TIA.
It will take 2.5 - 3 hours for your pending balance to show up but payments will be every 30 minutes after that Hi, thank you for explaining. In the meantime, I'd like to congratulate DERO devs and community for the effort so far. Bravo. |
|
|
|
|
roberval123
Jr. Member
Offline
Activity: 108
Merit: 1
|
|
January 27, 2018, 04:29:15 AM |
|
I feel squeezed out as I'm down to around 2 DERO per day with my Ryzen 5 1600 CPU... Switched over to Intensecoin but will keep tabs on the DERO network hashrate. Good luck to the devs and fellow miners; I'm still holding about 272 DERO in total.
Just curious. How many coins are you getting with that CPU on Dero vs Intensecoin per day? I'm doing about 440 H/s on average with this CPU without overclocking but with some tweaking of the xmr-stak cpu.txt file. More specifically, here is the relevant portion from that file in its entirety: "cpu_threads_conf" :
[
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 1 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 3 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 4 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 5 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 7 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 9 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 10 },
{ "low_power_mode" : false, "no_prefetch" : true, "affine_to_cpu" : 11 },
],
If you want to maintain usability of the computer for other things then it's very important to not use core 0 / thread 0. Ideally, you want to specify a total number of threads that is 1/2 the L3 cache size in MB; the Ryzen 5 1600 has 16MB of L3 cache so 8 threads are ideal. Right now (and similar to when I made the post you quoted), that 440 H/s can be used to generate less than 2 DERO per day or around 72 ITNS per day. So while I still believe in DERO, I just don't see mining it as a particularly good use of resources at the moment. Keep in mind Intense has 999 million coins, dero has 18.4 million. The small supply will help with price increases in the future, as long as the Devs keep up the good work. |
|
|
|
|
verccety
Newbie
Offline
Activity: 13
Merit: 0
|
|
January 27, 2018, 05:25:42 AM |
|
What's the current circulating supply?
|
|
|
|
|
CaptDero (OP)
Member
Offline
Activity: 308
Merit: 33
|
|
January 27, 2018, 09:09:48 AM
Last edit: January 27, 2018, 09:34:35 AM by CaptDero |
|
What's the current circulating supply?
Circulating supply 770735 (0.77 million) Approx Total Supply 18.4 million. |
|
|
|
|
|
MagicSmoker
|
|
January 27, 2018, 12:14:11 PM |
|
...
Right now (and similar to when I made the post you quoted), that 440 H/s can be used to generate less than 2 DERO per day or around 72 ITNS per day. So while I still believe in DERO, I just don't see mining it as a particularly good use of resources at the moment.
Keep in mind Intense has 999 million coins, dero has 18.4 million. The small supply will help with price increases in the future, as long as the Devs keep up the good work. Yes, I understand that, but I also take into consideration the current cash value earned over a 24h period given a certain amount of hashing power. These days I am getting around $1.80 in ITNS vs. $1.20 in DERO with my Ryzen 5 1600, so ITNS has the edge right now. I can't predict the future - maybe ITNS goes up in flames and DERO surpasses UBQ or even ETH as the top smart-contract coin - so the best strategy is to spread one's proverbial eggs among many baskets. Now if I actually get my hands on a server rack then I will be able to mine several (more) cryptonote coins simultaneously... |
|
|
|
|
|
Speedie
|
|
January 27, 2018, 03:51:53 PM
Last edit: January 27, 2018, 05:11:07 PM by Speedie |
|
...
Right now (and similar to when I made the post you quoted), that 440 H/s can be used to generate less than 2 DERO per day or around 72 ITNS per day. So while I still believe in DERO, I just don't see mining it as a particularly good use of resources at the moment.
Keep in mind Intense has 999 million coins, dero has 18.4 million. The small supply will help with price increases in the future, as long as the Devs keep up the good work. Yes, I understand that, but I also take into consideration the current cash value earned over a 24h period given a certain amount of hashing power. These days I am getting around $1.80 in ITNS vs. $1.20 in DERO with my Ryzen 5 1600, so ITNS has the edge right now. I can't predict the future - maybe ITNS goes up in flames and DERO surpasses UBQ or even ETH as the top smart-contract coin - so the best strategy is to spread one's proverbial eggs among many baskets. Now if I actually get my hands on a server rack then I will be able to mine several (more) cryptonote coins simultaneously... Ha! We're both interested in the same two projects. When deciding which one to mine (because let's be honest, the ann forum is full of copy/paste garbage and valueless ICOs whereas these two have a purpose) I try to work based on future rather than present value. Assume both projects hit $100m market cap in 2018. There would likely be ~500m circulating ITNS and ~1.5m circulating DERO. Therefore ITNS would be $0.20 and DERO would be $67. Then I multiply the expected number of coins / 24 hours for my hash rate by those future values and assess it from there. I also add in a small "gut feeling" factor that favors DERO if the math is close :-) |
|
|
|
|
newmz
Sr. Member
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
January 27, 2018, 05:35:29 PM |
|
Is DERO traded on any exchanges yet? Or would I be mining a coin just for future potential?
I like the concept but I'm a bit wary of a coin which does not have any actual value established by a market somewhere/
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
|
MagicSmoker
|
|
January 27, 2018, 05:49:14 PM |
|
Yes, I understand that, but I also take into consideration the current cash value earned over a 24h period given a certain amount of hashing power. These days I am getting around $1.80 in ITNS vs. $1.20 in DERO with my Ryzen 5 1600, so ITNS has the edge right now. I can't predict the future - maybe ITNS goes up in flames and DERO surpasses UBQ or even ETH as the top smart-contract coin - so the best strategy is to spread one's proverbial eggs among many baskets.
Now if I actually get my hands on a server rack then I will be able to mine several (more) cryptonote coins simultaneously...
Ha! We're both interested in the same two projects. When deciding which one to mine (because let's be honest, the ann forum is full of copy/paste garbage and valueless ICOs whereas these two have a purpose) I try to work based on future rather than present value. Assume both projects hit $100m market cap in 2018. There would likely be ~500m circulating ITNS and ~1.5m circulating DERO. Therefore ITNS would be $0.20 and DERO would be $67. Then I multiply the expected number of coins / 24 hours for my hash rate by those future values and assess it from there. I also add in a small "gut feeling" factor that favors DERO if the math is close :-) Heh, well I feel better about adding ITNS my "super-speculative" holdings now! I don't disagree with your analysis and I will be mining more DERO in the future, I just want to build up a position in ITNS and I only have so many computers to work with at the moment. Considering that just two months ago I was only mining UBQ with a single GTX 1050 Ti and not using my FX-8300 to do anything more demanding than surf the web, whereas today I have the FX-8300 and a new Ryzen 5 1600 churning away on ITNS, a single RX 570 mining MUSIC (another project I think has great promise), (2) GTX 1080 working on separate coins (one is actually being used to evaluate Nemosminer on MiningPoolHub at the moment), and (6) GTX 1060 which I mainly have mining ZEN but which have been diverted to mining TZC for 6 hours today because this coin is both PoW and PoS and I need more coins to have a chance of getting a block award from PoS in my lifetime. |
|
|
|
|
|
MagicSmoker
|
|
January 27, 2018, 05:50:21 PM |
|
Is DERO traded on any exchanges yet? Or would I be mining a coin just for future potential?
I like the concept but I'm a bit wary of a coin which does not have any actual value established by a market somewhere/
Yes, it's on stocks.exchange: https://stocks.exchange/trade/DERO/BTC |
|
|
|
|
RinceWind84
Member
Offline
Activity: 263
Merit: 12
HODL! If it isn't a grudge...
|
|
January 27, 2018, 05:51:21 PM |
|
5 Mhash/s. I think this is a pretty impressive number for such a young coin. I will see if I can manage to get 10 of these before it rises any further  |
|
|
|
|
kellog9000
Member
Offline
Activity: 224
Merit: 12
Pls Donate Merit :)
|
|
January 27, 2018, 06:16:46 PM |
|
Nice job!! Keep it up! Serious price  |
|
|
|
CaptDero (OP)
Member
Offline
Activity: 308
Merit: 33
|
|
January 28, 2018, 12:22:12 AM
Last edit: January 28, 2018, 01:18:34 AM by CaptDero |
|
Nice job!! Keep it up!
thank and welcome @kellog9000. |
|
|
|
|
|
FFI2013
|
|
January 28, 2018, 01:53:55 AM |
|
This is looks like a good project I like to see new mineable coins
|
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
January 28, 2018, 08:25:29 AM |
|
I can't sync :(
dero 0.11.3
derod: (downloaded data.mdb)
C:\xxxxxx>derod.exe --add-priority-node 89.38.97.110:18090 --add-priority-node 212.8.242.60:18090 --add-priority-node 85.217.170.245:18090 --add-priority-node 89.38.96.169:18090
2018-01-28 08:24:05.017 3056 INFO global src/daemon/main.cpp:279 Dero 'Helium Hydra' (v0.11.1.0-release)
2018-01-28 08:24:05.018 3056 INFO global src/daemon/protocol.h:55 Initializing cryptonote protocol...
2018-01-28 08:24:05.019 3056 INFO global src/daemon/protocol.h:60 Cryptonote protocol initialized OK
2018-01-28 08:24:05.019 3056 INFO global src/daemon/p2p.h:63 Initializing p2p server...
2018-01-28 08:24:07.042 3056 INFO global src/daemon/p2p.h:68 P2p server initialized OK
2018-01-28 08:24:07.044 3056 INFO global src/daemon/rpc.h:58 Initializing core rpc server...
2018-01-28 08:24:07.044 3056 INFO global contrib/epee/include/net/http_server_impl_base.h:70
Binding on 127.0.0.1:18091
2018-01-28 08:24:07.045 3056 INFO global src/daemon/rpc.h:63 Core rpc server initialized OK on port: 18091
2018-01-28 08:24:07.045 3056 INFO global src/daemon/core.h:73 Initializing core...
2018-01-28 08:24:07.047 3056 INFO global src/cryptonote_core/cryptonote_core.cpp:323 Loading blockchain from folder C:\ProgramData\dero\lmdb ...
2018-01-28 08:24:07.127 3056 INFO global src/cryptonote_core/cryptonote_core.cpp:421 Loading checkpoints
2018-01-28 08:24:07.129 3056 INFO global src/daemon/core.h:78 Core initialized OK
2018-01-28 08:24:07.129 3056 INFO global src/daemon/rpc.h:68 Starting core rpc server...
2018-01-28 08:24:07.130 [SRV_MAIN] INFO global src/daemon/rpc.h:73 Core rpc server started ok
2018-01-28 08:24:07.130 [SRV_MAIN] INFO global src/daemon/p2p.h:78 Starting p2p net loop...
2018-01-28 08:24:08.133 [P2P7] INFO global src/cryptonote_core/cryptonote_core.cpp:1258
**********************************************************************
The daemon will start synchronizing with the network. This may take a long time to complete.
You can set the level of process detailization* through "set_log <level|categories>" command*,
where <level> is between 0 (no details) and 4 (very verbose), or custom category based levels (eg, *:WARNING)
Use the "help" command to see the list of available commands.
**********************************************************************
2018-01-28 08:24:08.203 [P2P7] WARN net.dns src/common/dns_utils.cpp:487 WARNING: no two valid DeroPulse DNS checkpoint records were received
2018-01-28 08:24:08.405 [P2P9] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:305 [89.38.97.110:18090 OUT] Sync data returned a new top block candidate: 25713 -> 25725 [Your node is 12 blocks (0 days) behind]
SYNCHRONIZATION started
C:\xxxxx>
dero-wallet-cli says: Starting refresh...
Error: refresh failed: no connection to daemon. Please make sure daemon is running.. Blocks received: 0
Background refresh thread started I'll delete and start sync from scratch... but cant see whats wrong  |
|
|
|
|
CaptDero (OP)
Member
Offline
Activity: 308
Merit: 33
|
|
January 28, 2018, 08:56:20 AM |
|
I can't sync :(
dero 0.11.3
derod: (downloaded data.mdb)
C:\xxxxxx>derod.exe --add-priority-node 89.38.97.110:18090 --add-priority-node 212.8.242.60:18090 --add-priority-node 85.217.170.245:18090 --add-priority-node 89.38.96.169:18090
2018-01-28 08:24:05.017 3056 INFO global src/daemon/main.cpp:279 Dero 'Helium Hydra' (v0.11.1.0-release)
2018-01-28 08:24:05.018 3056 INFO global src/daemon/protocol.h:55 Initializing cryptonote protocol...
2018-01-28 08:24:05.019 3056 INFO global src/daemon/protocol.h:60 Cryptonote protocol initialized OK
2018-01-28 08:24:05.019 3056 INFO global src/daemon/p2p.h:63 Initializing p2p server...
2018-01-28 08:24:07.042 3056 INFO global src/daemon/p2p.h:68 P2p server initialized OK
2018-01-28 08:24:07.044 3056 INFO global src/daemon/rpc.h:58 Initializing core rpc server...
2018-01-28 08:24:07.044 3056 INFO global contrib/epee/include/net/http_server_impl_base.h:70
Binding on 127.0.0.1:18091
2018-01-28 08:24:07.045 3056 INFO global src/daemon/rpc.h:63 Core rpc server initialized OK on port: 18091
2018-01-28 08:24:07.045 3056 INFO global src/daemon/core.h:73 Initializing core...
2018-01-28 08:24:07.047 3056 INFO global src/cryptonote_core/cryptonote_core.cpp:323 Loading blockchain from folder C:\ProgramData\dero\lmdb ...
2018-01-28 08:24:07.127 3056 INFO global src/cryptonote_core/cryptonote_core.cpp:421 Loading checkpoints
2018-01-28 08:24:07.129 3056 INFO global src/daemon/core.h:78 Core initialized OK
2018-01-28 08:24:07.129 3056 INFO global src/daemon/rpc.h:68 Starting core rpc server...
2018-01-28 08:24:07.130 [SRV_MAIN] INFO global src/daemon/rpc.h:73 Core rpc server started ok
2018-01-28 08:24:07.130 [SRV_MAIN] INFO global src/daemon/p2p.h:78 Starting p2p net loop...
2018-01-28 08:24:08.133 [P2P7] INFO global src/cryptonote_core/cryptonote_core.cpp:1258
**********************************************************************
The daemon will start synchronizing with the network. This may take a long time to complete.
You can set the level of process detailization* through "set_log <level|categories>" command*,
where <level> is between 0 (no details) and 4 (very verbose), or custom category based levels (eg, *:WARNING)
Use the "help" command to see the list of available commands.
**********************************************************************
2018-01-28 08:24:08.203 [P2P7] WARN net.dns src/common/dns_utils.cpp:487 WARNING: no two valid DeroPulse DNS checkpoint records were received
2018-01-28 08:24:08.405 [P2P9] INFO global src/cryptonote_protocol/cryptonote_protocol_handler.inl:305 [89.38.97.110:18090 OUT] Sync data returned a new top block candidate: 25713 -> 25725 [Your node is 12 blocks (0 days) behind]
SYNCHRONIZATION started
C:\xxxxx>
dero-wallet-cli says: Starting refresh...
Error: refresh failed: no connection to daemon. Please make sure daemon is running.. Blocks received: 0
Background refresh thread started I'll delete and start sync from scratch... but cant see whats wrong Your daemon is just 12 blocks away from complete sync give it a min or two. wallet wont work until fully synced. By the time you read this message it may be fully synced, else pls see https://forum.dero.io/t/dero-blockchain-sync-problem/21/16Let me know if still any issues. |
|
|
|
|
restless
Legendary
Offline
Activity: 1151
Merit: 1001
|
|
January 28, 2018, 09:01:08 AM |
|
I was following the guide, and these 12blocks away was with downloaded blockchain.
And the deamon was simply exiting - alone! (see C:\xxxxx> at the end - it just exited)
deleting imdb folder and starting from scratch - and 30min later i'm synced - didn't chagne exe's in any way!
Thats troubling imo - the only reason I can think of is corruption of mdb file when downloading :/
|
|
|
|
|
|
