Luckybit
|
|
July 10, 2013, 07:14:28 PM |
|
When I compile on windows with mingw32 and then run primecoind it gives error: can't connect to server. Does anyone know the cause?.
I get that error on linux when I forget to sudo You need to run it as a daemon primecoind --daemon without it thinks your trying to connect to the server to send a command (for example getmininginfo). In my case primecoind runs but doing nothing, and then if I open another cmd window and type primecoind.exe getinfo it tells me error: can't connect to server Getting the same error as you. Someone should show a snapshot of their screen so we can see what its supposed to do.
|
|
|
|
LazyOtto
|
|
July 10, 2013, 07:16:27 PM |
|
With your report, Entz, I probably need to run this test again. Perhaps I did not give it enough time to get off of zero pps before I lost patience. I'm using OS X. ... Still have the problem that I must run a discrete instance per core rather than just letting primecoind spin off threads.
This problem is resolved with the code released earlier today.
|
|
|
|
twobits
|
|
July 10, 2013, 07:20:56 PM |
|
Can we get the windows Mac-Qt build?
Fixed that for you You mean in general? Or with this patch? Which just seem to add the overhead of checking a timer for each loop, and abort earlier.. maybe a better approach would be to have a limit n, check the time it takes for n at the end and raise or lower n for the next time? Oh, and a mac build of the original code if you meant that. http://dls.21stcenturymoneytalk.org/dls/primecoin/Primecoin-Qt-osx.zip
|
█████ █████ ███████ █████ ███ █████████████ █████ ██ █████████████████ █████ █ ██████ ██████ █████ ████ ████ █████████████ █████ ████ █████████████ █████ ████ █████████████ █████ ████ █████ █████ █████ █ ██████ ███████ █████ ██ ███████████ █████ █████ ███ █████████ ████ █████ █████ ███████ ██ | | | ███ ███ ███ ███ ███ ███ ███ ███ ███ | | | | | | ███ ███ ███ ███ ███ ███ ███ ███ ███ | | ►WhitePaper ►One-Pager | ███ ███ ███ ███ ███ ███ ███ ███ ███ | | | | ███ ███ ███ ███ ███ ███ ███ ███ ███ | | ███ ███ ███ ███ ███ ███ ███ ███ ███ | █████ █████ ███████ █████ ███ █████████████ █████ ██ █████████████████ █████ █ ██████ ██████ █████ ████ ████ █████████████ █████ ████ █████████████ █████ ████ █████████████ █████ ████ █████ █████ █████ █ ██████ ███████ █████ ██ ███████████ █████ █████ ███ █████████ ████ █████ █████ ███████ ██ |
|
|
|
|
craslovell
Legendary
Offline
Activity: 1470
Merit: 1021
|
|
July 10, 2013, 07:39:00 PM |
|
Proxy kicked my ass, I can't even download the dependencies I need
|
|
|
|
Giodark
|
|
July 10, 2013, 07:43:00 PM |
|
[/quote] I had primecoin in a subdirectory cd dir/primecoin but if I try to change your string I have problems after cloning, can you (or anybody else) suggest me how to go on thx
|
|
|
|
azwccc
|
|
July 10, 2013, 07:43:22 PM |
|
Proxy kicked my ass, I can't even download the dependencies I need
same here, lots of 404 Not Found Anyone bother just compile primecoind?
|
Bitrated user: azwccc.
|
|
|
BazkieBumpercar
|
|
July 10, 2013, 07:47:43 PM |
|
What is the -j8 parameter on the make command? makes it build multithreaded (replace 8 with number of cores you have). (won't make resulting binary faster, just compiles faster)
|
|
|
|
shinkicker
|
|
July 10, 2013, 08:11:54 PM Last edit: July 10, 2013, 08:24:01 PM by shinkicker |
|
I have window qt-client built and running, anything I should look for in debug to help development troubleshooting?
Main thing noticed so far is the primespersec is climbing up faster then before.
|
|
|
|
Kouye
Sr. Member
Offline
Activity: 336
Merit: 250
Cuddling, censored, unicorn-shaped troll.
|
|
July 10, 2013, 08:18:00 PM |
|
Anyone bother just compile primecoind?
I uploaded the primecoind I managed to build on a Ubuntu 12.04.2 hereJust had to add "USE_UPNP=-" to make it successful, as stated here : https://bitcointalk.org/index.php?topic=182027.0I'm a complete newbie, so use at your own risk. My pps have gone up since then, though.
|
[OVER] RIDDLES 2nd edition --- this was claimed. Look out for 3rd edition! I won't ever ask for a loan nor offer any escrow service. If I do, please consider my account as hacked.
|
|
|
nhminer
|
|
July 10, 2013, 08:54:11 PM |
|
I have window qt-client built and running, anything I should look for in debug to help development troubleshooting?
Main thing noticed so far is the primespersec is climbing up faster then before.
Builds fine, but I must have some option wrong -- quad core 3Ghz Windows 7 x64, 16GB memory and I get a whopping 7 pps after 5 minutes These are the final commands/options I used to build make memenv_test TARGET_OS=OS_WINDOWS_CROSSCOMPILE in makefile.mingw BOOST_SUFFIX?=-mgw46-mt-sd-1_54 LDFLAGS=-Wl,--dynamicbase -Wl,--nxcompat -Wl,--large-address-aware -static mingw32-make -f makefile.mingw strip primecoind.exe Any suggestions?
|
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
Vilepickle
Member
Offline
Activity: 76
Merit: 10
|
|
July 10, 2013, 08:56:47 PM |
|
Works a lot better now, getting over 2000 PPS on a 16 core Xeon machine, genproclimit at 30. Better than 0!
|
BTC: 14PzAZCW1k8aA4FFFZ55LxizQqwBR969ee
|
|
|
craslovell
Legendary
Offline
Activity: 1470
Merit: 1021
|
|
July 10, 2013, 09:01:19 PM |
|
I'm jealous right now. Waiting for the kind fellow who releases an optimized windows build
|
|
|
|
shinkicker
|
|
July 10, 2013, 09:09:27 PM |
|
I have window qt-client built and running, anything I should look for in debug to help development troubleshooting?
Main thing noticed so far is the primespersec is climbing up faster then before.
Builds fine, but I must have some option wrong -- quad core 3Ghz Windows 7 x64, 16GB memory and I get a whopping 7 pps after 5 minutes These are the final commands/options I used to build make memenv_test TARGET_OS=OS_WINDOWS_CROSSCOMPILE in makefile.mingw BOOST_SUFFIX?=-mgw46-mt-sd-1_54 LDFLAGS=-Wl,--dynamicbase -Wl,--nxcompat -Wl,--large-address-aware -static mingw32-make -f makefile.mingw strip primecoind.exe Any suggestions? You could try adding -march=native to makefile.mingw (this tells gcc to compile optimized to your CPU type) CFLAGS=-mthreads -O2 -w -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter $(DEBUGFLAGS) $(DEFS) $(INCLUDEPATHS) -march=native
|
|
|
|
vinne81
|
|
July 10, 2013, 09:11:21 PM |
|
Works a lot better now, getting over 2000 PPS on a 16 core Xeon machine, genproclimit at 30. Better than 0!
Mind sharing that file
|
|
|
|
CryptoBeggar
Member
Offline
Activity: 119
Merit: 10
|
|
July 10, 2013, 09:14:03 PM |
|
Has anyone here *by any chance* managed to compile this under OpenSUSE. Seems like there is a miniupnpc gallery missing (I shall ask on dedicated forum anyway).
|
|
|
|
Eli0t
|
|
July 10, 2013, 09:14:43 PM |
|
I'm jealous right now. Waiting for the kind fellow who releases an optimized windows build
+1
|
LTC: LKpJf3uk7KsHU73kxq8iFJrP1AAKN7Yni7 DGC: DKXGvEbj3Rwgrm2QQbRyNPDDZDYoq4Y44d XPM: AWV5AKfLFyoBaMjg9C77rGUBhuFxz5DGGL
|
|
|
vinne81
|
|
July 10, 2013, 09:16:03 PM |
|
Has anyone here *by any chance* managed to compile this under OpenSUSE. Seems like there is a miniupnpc gallery missing (I shall ask on dedicated forum anyway).
How do you compile? Probably you need to add the same option as on other systems make -f makefile.unix USE_UPNP=
|
|
|
|
eule
|
|
July 10, 2013, 09:19:09 PM |
|
USE_UPNP=-
|
|
|
|
vingaard
Legendary
Offline
Activity: 1246
Merit: 1011
|
|
July 10, 2013, 09:22:09 PM |
|
I'm jealous right now. Waiting for the kind fellow who releases an optimized windows build
+1
|
|
|
|
Luckybit
|
|
July 10, 2013, 09:24:10 PM |
|
USE_UPNP=- primecoind doesn't do anything once compiled. Is there a missing step?
|
|
|
|
|