Nemo1024 (OP)
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 23, 2013, 11:37:45 AM |
|
that's one mighty silly looking setup, hope there's no fans on top of your computer ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Also, props for the floppy drive. You have me at a loss: silly as in "inefficient" or as in "awesome"? ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) All BEs can be touched without burning your fingers and the airflow between the rows is good, yet I can have them sitting compactly. I was actually planning to have them on top of another newer PC and install 2x120mm exhaust vents on top (that machine runs pretty cool as it is). I might just go through with it. Oh, and you can't live without floppy. How are you supposed to move data (yes, all 1.44MB of it) around? ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Edit: And just a thought: 60BEs pushing 20 GHs in the same amount of space as BFL Jalapeno pushing 7GHs ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
Noitev
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 23, 2013, 11:51:46 AM |
|
on a pseudo related note, I found a 268 million hash on 1 of my 10 miners only for it to be stale ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Nemo1024 (OP)
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 23, 2013, 12:32:38 PM |
|
Ah, that one. I thought the name sounded familiar. Well, I haven't been able to find a single block, going from 300MHs last August to 20GHs this August. You, at least, found something. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Now, back on topic. Does anyone have any more USB hub experience to share. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
RushNY
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 74
Merit: 10
PogChamp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 23, 2013, 12:48:02 PM |
|
Currently running 48 erupters on 6 Rosewill RHB-500 with one for daisy chaining to a Raspberry Pi. Smooth so far, and as to the amount of devices a raspberry pi can support it seems like it's a hardware limitation. I plugged in a Jalapeno and it didn't like it too much, it ran for a while then started crashing a few hours later constantly, resulting in a pi reboot to get everything back up. ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fhostr.co%2Ffile%2FGvHTrAFGpqq9%2F2013-08-23-08.39.49.jpg&t=665&c=Q1F2lLM5c8eWxA)
|
HOdlCoin - HKuon6NNgAB3CbME8H7iwXs4XKshovnaWh
|
|
|
Nemo1024 (OP)
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 23, 2013, 01:09:58 PM |
|
No cooling? You are a brave man. It's my experience as well that Rosewill/SL-Lab hub smoothly handles 8 devices.
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
RushNY
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 74
Merit: 10
PogChamp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 23, 2013, 01:20:41 PM |
|
No cooling? You are a brave man. It's my experience as well that Rosewill/SL-Lab hub smoothly handles 8 devices.
Hasn't arrived yet, I've been somewhat on edge but the fans come today. I'll be running two of these: http://www.newegg.com/Product/Product.aspx?Item=N82E16835106140 and I already have a few Arctic usb fans on the powerstrips.
|
HOdlCoin - HKuon6NNgAB3CbME8H7iwXs4XKshovnaWh
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 01:12:54 AM Last edit: August 24, 2013, 01:29:06 AM by Unacceptable |
|
Ok,learning curve here ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I bought these: http://www.amazon.com/dp/B0058RLD9C/ref=pe_385040_30332200_pe_309540_26725410_itemAlmost $10 with shipping for 10 pieces-5.5mm x 2.1mm,very cool device & works very well.These work on my old USB hubs only,due to the inside diameter being too small. I picked up one these from ebay: http://www.ebay.com/itm/110638231265?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649Almost $25 with shipping-It too works very well,so far,if it dies or malfunctions,I'll report on it later ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) So,now I needed to find that same barrel adapter but in a 5.5mm x 2.5mm size (I think thats the size,no way to measure but by eye) to fit these: http://www.newegg.com/Product/Product.aspx?Item=N82E16817659004Works well with 4 BE's,not 5, (2.6 amps) but the wallwort gets very warm,not too hot to touch,but very warm........... Found em !!!!!!!!!!! http://www.bixnet.com/cnt525m.htmlI'll be ordering a few & review them after I get em WARNING,watch the polarity,get a volt meter & check + & - is in the correct position,center or outer posts,BEFORE you connect!!!!!!!!!!!!I 'm glad I checked,I cut an end off a wallwort & one wire had a dash marked on it,thinking it was negative,I wired it up.When I checked it was positive ![Shocked](https://bitcointalk.org/Smileys/default/shocked.gif) No idea why it wasn't maked with little +'s like most are ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) So,double check your polarities BEFORE connecting to your hub/device's ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
visdude
Legendary
Offline
Activity: 1081
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 02:28:42 AM |
|
This is an update on the MCM hubs. As I've mentioned in my initial review, it supports seven miners. There are only 46 miners on this setup; 1+2 rear ports on the last two hubs respectively are not populated (waiting for more miners to come in): ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1330.photobucket.com%2Falbums%2Fw576%2Fvisdude%2FIMG_0096_zpsda217c14.jpg&t=665&c=2sjkt_7iJmkiKQ) ...and here they are in action: http://s1330.photobucket.com/user/visdude/media/MVI_0112_zps64f2f52e.mp4.htmlThe hub stands/bases were originally affixed onto the desk ( here) but I found it to be inflexible and inconvenient. So, I got a cheapo clipboard and a roll of masking tape at the local 99-cent store and made a movable platform out of it to organize the hubs. This setup is ideal with these hubs since one can just pull it from the base and work on it independently from the rest (modular). Partly seen in the lower right hand corner of the image is another hub. I have started to create another row of seven MCM-type generic hubs (all black this time) along the other side of the clipboard. I'm pairing them with 4A bricks (much better alternative than wall warts in that it does not waste and occupy two outlets on the power strip). It comes out a little cheaper than MCM's without being subjected to exorbitant shipping charges and applicable sales tax. I would also have a bit of a headroom power wise (.5A more). The setup is currently hosted through a single USB 2.0 port on an old netbook and draws 11W off the wall while mining.
|
|
|
|
Nemo1024 (OP)
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 06:59:39 AM |
|
Visdude, which angled adapters do you use there? And which fans are those? USB-powered? I've updated the OP with info on your setup.
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
lyth0s
Legendary
Offline
Activity: 1260
Merit: 1000
World Class Cryptonaire
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 07:56:22 AM |
|
This is an update on the MCM hubs. As I've mentioned in my initial review, it supports seven miners. There are only 46 miners on this setup; 1+2 rear ports on the last two hubs respectively are not populated (waiting for more miners to come in): ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1330.photobucket.com%2Falbums%2Fw576%2Fvisdude%2FIMG_0096_zpsda217c14.jpg&t=665&c=2sjkt_7iJmkiKQ) ...and here they are in action: http://s1330.photobucket.com/user/visdude/media/MVI_0112_zps64f2f52e.mp4.htmlThe hub stands/bases were originally affixed onto the desk ( here) but I found it to be inflexible and inconvenient. So, I got a cheapo clipboard and a roll of masking tape at the local 99-cent store and made a movable platform out of it to organize the hubs. This setup is ideal with these hubs since one can just pull it from the base and work on it independently from the rest (modular). Partly seen in the lower right hand corner of the image is another hub. I have started to create another row of seven MCM-type generic hubs (all black this time) along the other side of the clipboard. I'm pairing them with 4A bricks (much better alternative than wall warts in that it does not waste and occupy two outlets on the power strip). It comes out a little cheaper than MCM's without being subjected to exorbitant shipping charges and applicable sales tax. I would also have a bit of a headroom power wise (.5A more). The setup is currently hosted through a single USB 2.0 port on an old netbook and draws 11W off the wall while mining. That is an awesome setup man.
|
|
|
|
lyth0s
Legendary
Offline
Activity: 1260
Merit: 1000
World Class Cryptonaire
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 08:00:47 AM |
|
SolidbitShop did you overclock some of your ASIC miners to 400Mh/s or did they just arrive like that? If you did overclock them, how is the heat production off of those ones?
|
|
|
|
Xer0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 10:34:43 AM |
|
guys, can you add an colum "backfeed y/n" please? and hub owners should check and report
power backfeeding (vcc on uplink port connected to power input) is a serious problem for some hardware, i nearly killed my netbook
also such hubs tend to steal current from each other when cascaded
|
|
|
|
MonocleMan
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 12:59:38 PM Last edit: September 23, 2013, 07:31:01 PM by Maged |
|
http://dearhusband.com/monoclemanhub1.JPGhttp://dearhusband.com/monoclemanhub2.JPGSo my experiment based on the works of other in this thread payed off, I bought the power supply from ebay and hooked it up to 4 hubs using thise barrel connectors from both mcm and monoprice. The hubs themselves were $6 each, the power supply was $20 and I have them all plugged into my aitech 3.0 USB hub. So Far so good, 42 BE's running pretty smoothly. MM
|
|
|
|
Nemo1024 (OP)
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 04:37:10 PM Last edit: August 24, 2013, 04:51:16 PM by Nemo1024 |
|
guys, can you add an colum "backfeed y/n" please? and hub owners should check and report
power backfeeding (vcc on uplink port connected to power input) is a serious problem for some hardware, i nearly killed my netbook
also such hubs tend to steal current from each other when cascaded
You should expect backfeeding and/or power draw on USB line-in as default. To be on the safe side, splice the USB cable and cut the red wire, as was suggested before. I can at least say regarding my D-Links that they draw from input USB. Without power on the intermittent hub, they can run 5 BEs; with additional power they run 6. @MonocleMan: You might want to rotate the images 180 degrees. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
Xer0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 05:18:42 PM |
|
To be on the safe side, splice the USB cable i actually use a cheapstake passive 7-portish hub with desoldered all vcc pins was the better option as my powering hubs all have non replaceable cables ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
viriat0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 24, 2013, 11:48:49 PM |
|
lyth0s nice setup ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
pidge
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 101
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 25, 2013, 12:25:58 PM |
|
Update on my cheap 10 port hubs - the DC Barrel plugs melted on the two cables I made (my crap soldering is most likely to blame), so those two hubs now have had a DC Barrel jack-adectomy and now have a power cable soldered directly in place of the jacks. And some of the USB sockets need re-flowing - intermittent power connections to them.
|
|
|
|
Nemo1024 (OP)
Legendary
Offline
Activity: 1680
Merit: 1014
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 25, 2013, 05:55:17 PM |
|
Update on my cheap 10 port hubs - the DC Barrel plugs melted on the two cables I made (my crap soldering is most likely to blame), so those two hubs now have had a DC Barrel jack-adectomy and now have a power cable soldered directly in place of the jacks. And some of the USB sockets need re-flowing - intermittent power connections to them.
Sounds like a fire disaster waiting to happen. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Have you tried those non-soldering barrel plugs and thicker cables?
|
“Dark times lie ahead of us and there will be a time when we must choose between what is easy and what is right.” “We are only as strong as we are united, as weak as we are divided.” “It is important to fight and fight again, and keep fighting, for only then can evil be kept at bay, though never quite eradicated.”
|
|
|
pidge
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 101
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
August 25, 2013, 08:50:20 PM |
|
Update on my cheap 10 port hubs - the DC Barrel plugs melted on the two cables I made (my crap soldering is most likely to blame), so those two hubs now have had a DC Barrel jack-adectomy and now have a power cable soldered directly in place of the jacks. And some of the USB sockets need re-flowing - intermittent power connections to them.
Sounds like a fire disaster waiting to happen. ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) Have you tried those non-soldering barrel plugs and thicker cables? Given that the Hubs were ~US$9 each, and I've already spent US$2 on a barrel plug and wire for each, and I wanted to get them running again ASAP, out came the soldering iron....
|
|
|
|
|
|