[ANN] [SPOT] | SUCCESSFUL FORK COMPLETE - On CoinPayments.net/Cryptsy/Coins-e

[iGotSpots]

Hash rate is back over 100 mHash and fairly steady now. I wonder if people know something...

[smscotten]

Status: 0/unconfirmed
Date: 7/24/2013 01:15
To: MDrk8nMfmUKeEuvAAQg7Mg9x7x4uLNVsE4
Debit: -20.00 SPT
Transaction fee: -0.10 SPT
Net amount: -20.10 SPT
Transaction ID: abb72ffeef5ab0308a4a0cdcfffdbedc2edd0cf3dafcfbee9930ddb160227f5b


I sent it last night, but my client closed before it actually got sent. My bad

NP. I just sat down at my desk but SPT-QT is telling me that the transaction came through at 7:19am my (California) time. Sounds about right.

Thanks again!

[minus]

SPT now listed on Coins-E!
https://www.coins-e.com/exchange/SPT_BTC/

Cheers

[iGotSpots]

SPT now listed on Coins-E!
https://www.coins-e.com/exchange/SPT_BTC/

Cheers

Awesome! Thanks man.

Remember, guys, there are still LESS THAN 100,000 SPOTS TOTAL - Don't sell too low

[one4many]

Something seems to be seriously wrong here:

Code:

# spots/src/spotsd getmininginfo
{
    "blocks" : 1894,
    "currentblocksize" : 1454,
    "currentblocktx" : 1,
    "difficulty" : 3.20559702,
    "errors" : "",
    "generate" : true,
    "genproclimit" : -1,
    "hashespersec" : 10316,
    "networkhashps" : 77935380,
    "pooledtx" : 1,
    "testnet" : false
}

And out of the logs:

Code:

trying connection 194.141.43.4:4588 lastseen=82.5hrs
connection timeout
trying connection 174.107.165.198:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 65.29.242.236:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 174.50.248.26:4588 lastseen=1.9hrs
connection timeout
trying connection 173.228.105.207:4588 lastseen=1.9hrs
connect() failed after select(): No route to host
trying connection 184.162.218.92:4588 lastseen=1.9hrs
connection timeout
trying connection 193.40.150.210:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 218.104.38.98:4588 lastseen=9.6hrs
connect() failed after select(): Connection refused
trying connection 89.29.69.214:4588 lastseen=5.4hrs
Flushed 294 addresses to peers.dat  2ms
connection timeout
trying connection 193.40.150.210:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 68.41.11.231:4588 lastseen=1.9hrs
connection timeout
trying connection 50.149.211.203:4588 lastseen=1.9hrs
connection timeout
trying connection 84.187.121.13:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 92.90.17.129:4588 lastseen=0.9hrs
connect() failed after select(): Connection refused
trying connection 69.140.55.237:4588 lastseen=1.9hrs
connection timeout
trying connection 69.85.86.195:4588 lastseen=354078.6hrs
trying connection 173.228.105.207:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
connect() failed after select(): No route to host
trying connection 174.50.248.26:4588 lastseen=1.9hrs
trying connection 69.85.86.195:4588 lastseen=354078.6hrs
connect() failed after select(): Connection refused
trying connection 68.103.6.158:4588 lastseen=354078.6hrs

  one4many

[iGotSpots]

Something seems to be seriously wrong here:

Code:

# spots/src/spotsd getmininginfo
{
    "blocks" : 1894,
    "currentblocksize" : 1454,
    "currentblocktx" : 1,
    "difficulty" : 3.20559702,
    "errors" : "",
    "generate" : true,
    "genproclimit" : -1,
    "hashespersec" : 10316,
    "networkhashps" : 77935380,
    "pooledtx" : 1,
    "testnet" : false
}

And out of the logs:

Code:

trying connection 194.141.43.4:4588 lastseen=82.5hrs
connection timeout
trying connection 174.107.165.198:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 65.29.242.236:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 174.50.248.26:4588 lastseen=1.9hrs
connection timeout
trying connection 173.228.105.207:4588 lastseen=1.9hrs
connect() failed after select(): No route to host
trying connection 184.162.218.92:4588 lastseen=1.9hrs
connection timeout
trying connection 193.40.150.210:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 218.104.38.98:4588 lastseen=9.6hrs
connect() failed after select(): Connection refused
trying connection 89.29.69.214:4588 lastseen=5.4hrs
Flushed 294 addresses to peers.dat  2ms
connection timeout
trying connection 193.40.150.210:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 68.41.11.231:4588 lastseen=1.9hrs
connection timeout
trying connection 50.149.211.203:4588 lastseen=1.9hrs
connection timeout
trying connection 84.187.121.13:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
trying connection 92.90.17.129:4588 lastseen=0.9hrs
connect() failed after select(): Connection refused
trying connection 69.140.55.237:4588 lastseen=1.9hrs
connection timeout
trying connection 69.85.86.195:4588 lastseen=354078.6hrs
trying connection 173.228.105.207:4588 lastseen=1.9hrs
connect() failed after select(): Connection refused
connect() failed after select(): No route to host
trying connection 174.50.248.26:4588 lastseen=1.9hrs
trying connection 69.85.86.195:4588 lastseen=354078.6hrs
connect() failed after select(): Connection refused
trying connection 68.103.6.158:4588 lastseen=354078.6hrs

  one4many

That happened yesterday to one of us while trying to update the ports. I don't see any of the peers you are listing in my list. Try using these, they are all stable and up to date. Now sure how you got any of those, but these are all working:


11:43:57

getpeerinfo


11:43:57

[
{
"addr" : "71.187.248.95:4588",
"services" : "00000001",
"lastsend" : 1374684117,
"lastrecv" : 1374684228,
"conntime" : 1374674535,
"version" : 60001,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 4100,
"banscore" : 0
},
{
"addr" : "70.98.114.229:4588",
"services" : "00000001",
"lastsend" : 1374684229,
"lastrecv" : 1374684229,
"conntime" : 1374674541,
"version" : 60001,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1840,
"banscore" : 0
},
{
"addr" : "24.6.21.198:4588",
"services" : "00000001",
"lastsend" : 1374684224,
"lastrecv" : 1374684237,
"conntime" : 1374674547,
"version" : 60001,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 4100,
"banscore" : 0
},
{
"addr" : "54.212.51.236:4588",
"services" : "00000001",
"lastsend" : 1374684237,
"lastrecv" : 1374684237,
"conntime" : 1374674594,
"version" : 60001,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 4101,
"banscore" : 0
},
{
"addr" : "86.214.220.179:4588",
"services" : "00000001",
"lastsend" : 1374684117,
"lastrecv" : 1374684224,
"conntime" : 1374677828,
"version" : 60001,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 4109,
"banscore" : 0
},
{
"addr" : "66.187.73.142:4588",
"services" : "00000001",
"lastsend" : 1374684099,
"lastrecv" : 1374684229,
"conntime" : 1374683120,
"version" : 60001,
"subver" : "/Satoshi:1.0.0/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1898,
"banscore" : 0
}
]

[iGotSpots]

Hash rate almost 300 mHash now

[PerfectAgent]

Aww, I just saw that you had that giveaway, is it over?

[iGotSpots]

Aww, I just saw that you had that giveaway, is it over?

Post an address. I'm in a good mood since we got listed today

[Roosevelt122007]

SPT now listed on Coins-E!
https://www.coins-e.com/exchange/SPT_BTC/

Cheers

Awesome! Thanks man.

Remember, guys, there are still LESS THAN 100,000 SPOTS TOTAL - Don't sell too low

The Bids is so cheap!!

[smscotten]

The spread is still pretty wide but it's gotten a lot smaller than it was earlier!

[elements]

Anyone else want 20 free Spots?

Oh yes please :

MCWBGgLDXWU7NTJz4YMdXR7LQoQQA31g7R

[elements]

Okay !!!

Finally a new coin with a mac wallet - me happy (and its about precious metals I am doubly happy)!!!

Now the big question: the client supports soloming in the GUI (me happy again).

I only have a macbook pro with snowleopard on it. can I mine without killing my mac ? (please say yes!)
And if so, what do I have to enter in the entry fields?

- threads (default=1)
- scantime (default =1)
- Debug Logging (on or off? - default: off)
- server
- port
- username
- password

Thank you for your help!!!

[elements]

Mac Client now live at

https://app.box.com/s/gw7hpy7xug18wr3rmo9d

Please let me know if it works for you so I can pay the bounty

As far as I can tell it works.

But only 1 active node connection.

And I would like to know how I can use the built in mining feature, please.

(This is the first non major client (BTC/LTC/PPC) which didn't crash either upon start or when creating a new address)
So far so good !!!

MBP 2011
Snow Leopard

[elements]

Mac Client now live at

https://app.box.com/s/gw7hpy7xug18wr3rmo9d

Please let me know if it works for you so I can pay the bounty

I connected to the network, seems ok.
Not able to mine in spt.coinmine.pl pool.
Trying the others...

Definitely use the first pool if you can. We need to spread the hash rate around.

I have never used a mac in my life sorry. Did the Mac client work at least? Just so I can pay the guy who made it if it works

Yeah seems ok - I wait for 1spot from the faucet so I am 100% sure...
Is solo mining worth the deal??

Post an address and I'll send you some. The difficulty is all over the place. At times it's good to solo and at times it's good to pool. Stick with one and they will even out in the long run

I also started solomining on mac. It seems that it works now at 2750-3000 H/s.
But I only have one connection and I didn't change anything in the entry fields.
I also didn't enter anything in the consule - I simply pressed the button "start mining" (hope that works)

Also, I am waiting for the faucet. - I got an email approx. 1 hour ago, that I would be sent shortly but so far nothing received.

Hopes this info helps.


I gladly help you with finding out if the mac client receives funds

MCWBGgLDXWU7NTJz4YMdXR7LQoQQA31g7R

Thanks !!!

[elements]

When I go to console and enter
getminerinfo

this comes up

{
"blocks" : 2240,
"currentblocksize" : 1000,
"currentblocktx" : 0,
"difficulty" : 1.35185032,
"errors" : "",
"generate" : false,
"genproclimit" : -1,
"hashespersec" : 2743,
"networkhashps" : 46285680,
"pooledtx" : 0,
"testnet" : false
}

good?

[Santa.Claus]

Santa really gives a thumbs up to this coin.  I like it! I have put 4000 KH on it and have also listed a bunch of coins on coins-e.com for sale to stimulate the market.  I will be placing buy orders shortly too.  Keep up the good work!

[elements]

Where can you put this for mac:

rpcuser=x
rpcpassword=x
rpcallowip=Your Miner IP
rpcport=Your Miner Port
server=1
gen=0

block_nTime=1317972665
block_nNonce=2084524493
maxconnections=100

addnode=69.85.86.195
addnode=68.103.6.158
addnode=71.187.248.95
addnode=70.69.238.84
addnode=108.185.218.246
addnode=70.98.114.229

I looked into the spots/application support folder and there is no config...

[iGotSpots]

Where can you put this for mac:

rpcuser=x
rpcpassword=x
rpcallowip=Your Miner IP
rpcport=Your Miner Port
server=1
gen=0

block_nTime=1317972665
block_nNonce=2084524493
maxconnections=100

addnode=69.85.86.195
addnode=68.103.6.158
addnode=71.187.248.95
addnode=70.69.238.84
addnode=108.185.218.246
addnode=70.98.114.229

I looked into the spots/application support folder and there is no config...

Never used a mac but in windows it goes into %appdata%/spots and there is no conf you have to create it.  When you try to launch the client as a server just look st the error that pops up. It should say that spots.conf is missing and where it should go

[iGotSpots]

Santa really gives a thumbs up to this coin.  I like it! I have put 4000 KH on it and have also listed a bunch of coins on coins-e.com for sale to stimulate the market.  I will be placing buy orders shortly too.  Keep up the good work!

Awesome, thanks. Welcome aboard!