relax69
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 61
Merit: 40
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 23, 2022, 11:53:45 AM Last edit: January 26, 2022, 06:08:53 AM by relax69 Merited by vapourminer (2), Rami84 (1) |
|
The way to keep it from trying to put a new driver version back in is to go to device manager, go to display adapters, find yours, and then ROLL BACK to the previous driver version. It won't update the driver again until there is a new version of Windows(going to Windows 10 or 11 22H1 for example). My other question though, is why PhoenixMiner just breaks with new AMD driver versions. If you intentionally install anything newer than Radeon Software 21.11.3 for RDNA 2 cards(including my Radeon 6800), the thing comes back with the unknown version issue and it won't mine without -clkernel 0. So, is that a hardcoded "look for driver version" and then break as a result, because it should TRY to use the proper code path for these newer drivers, but it seems to be doing a fallback if it doesn't recognize the driver version.
Thanks for the idea to Roll back driver. So far it works well. PM has a slightly higher hashrate compared to other miners because it uses optimized kernels for all GPUs connected to the driver. For the older versions of PM looks like was made to switch with a generic kernel when it can't find a driver from the list, but I have no idea why they made the last few versions crash when the driver is unknown. When they released 5.9d they promised a completely new miner next month, but a few months after we did not get anything. I'm back to mining after stopping for over 2 years, but I only getting max 14Mh/s hash tried modded bios and stock bios. Is this normal? Edit: Sorry forgot to say it's Rx570 4GB mining ETC
Is compute mode on? I have a potato Asus PCIe2.0 with a RX580 8g (I7 12g ram) (driver fixed)
I'm finally using W10 after 7 was only giving me 1/3 hash I should have for a year (yes, I'm stubborn)
now, I'm getting the 28+hash I should have had instead of 8-9 at least, but...
I'm on 5.9d AND 21.11.3, but still have to use ckernal 0 to get it to work and that gives me abt 7-10% stales!
Is this normal? Even with the low hash before I never had this high a stale rate, and didnt have to use the ck0 until recently (on my old miner version with no NEW win 7 updates or drivers this started happening out of the blue)
Thanks for any ideas or help!!
For RX 580 I would recommend you to use driver version 21.3.2 or older.
|
|
|
|
Rami84
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2022, 05:33:17 PM |
|
I'm back to mining after stopping for over 2 years, but I only getting max 14Mh/s hash tried modded bios and stock bios. Is this normal? Edit: Sorry forgot to say it's Rx570 4GB mining ETC
Is compute mode on? [/quote] Now I'm ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) but it's 22-23MH trying different configurations now to get better but still the same (using -clkernel 0 by the way to get it to work)
|
|
|
|
dazmann
Jr. Member
Offline
Activity: 45
Merit: 6
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2022, 05:42:27 PM |
|
I'm back to mining after stopping for over 2 years, but I only getting max 14Mh/s hash tried modded bios and stock bios. Is this normal? Edit: Sorry forgot to say it's Rx570 4GB mining ETC
Is compute mode on? Now I'm ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) but it's 22-23MH trying different configurations now to get better but still the same (using -clkernel 0 by the way to get it to work) [/quote] Try setting mclock to 2000mhz and memory timing level 2 on the radeon software. Also fiddle with -vmr or -rxboost options.
|
|
|
|
Rami84
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2022, 06:30:04 PM |
|
I'm back to mining after stopping for over 2 years, but I only getting max 14Mh/s hash tried modded bios and stock bios. Is this normal? Edit: Sorry forgot to say it's Rx570 4GB mining ETC
Is compute mode on? Now I'm ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) but it's 22-23MH trying different configurations now to get better but still the same (using -clkernel 0 by the way to get it to work) Try setting mclock to 2000mhz and memory timing level 2 on the radeon software. Also fiddle with -vmr or -rxboost options. [/quote] What is the best hash can Rx 570 4GB can do?
|
|
|
|
Rami84
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 24, 2022, 08:25:20 PM Last edit: January 25, 2022, 08:21:40 AM by Rami84 |
|
Now it reaches 27.7MH will do somemore tunning tomorrow
|
|
|
|
Rami84
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2022, 10:27:09 AM |
|
I have a potato Asus PCIe2.0 with a RX580 8g (I7 12g ram) (driver fixed)
I'm finally using W10 after 7 was only giving me 1/3 hash I should have for a year (yes, I'm stubborn)
now, I'm getting the 28+hash I should have had instead of 8-9 at least, but...
I'm on 5.9d AND 21.11.3, but still have to use ckernal 0 to get it to work and that gives me abt 7-10% stales!
Is this normal? Even with the low hash before I never had this high a stale rate, and didnt have to use the ck0 until recently (on my old miner version with no NEW win 7 updates or drivers this started happening out of the blue)
Thanks for any ideas or help!!
Try -clkernel 1 it's working for me
|
|
|
|
BogBeast
Newbie
Offline
Activity: 6
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2022, 11:31:48 AM Merited by vapourminer (2) |
|
I have a rig with 6 x 6700s and 6 Nvidia cards. Windows 10 with latest updates Has been working ok on 5.8 but has started causing me issues, generating errors on PM start: Failed to compile program: clBuildProgram (-11) Unable to prepare kernels: clCreateKernel (-46) Fatal error detected. Restarting. No idea why, has been working and stable(ish) for months. Maybe windows update. So, I thought it might be time to update, so updated gfx drivers and trying to update to 5.9d, but just starts and immediately exits ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) D:\Test>PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 Phoenix Miner 5.9d Windows/msvc - Release build -----------------------------------------------
CUDA version: 11.0, CUDA runtime: 8.0
D:\Test> Does the same on two of my other rigs, using both my config.txt and the default startminer.cmd Am I missing something stupid? So I managed to sort out my issues with 5.8. Windows was insisting on updating the drivers, I had been relying on the DDU option to prevent driver update but this did not seem to work. So I had to edit the local policy GPEDIT to prevent the AMD cards from getting updated https://www.howtogeek.com/263851/how-to-prevent-windows-from-automatically-updating-specific-drivers/Back to being stable Still no idea why PM 5.9 starts and immediately exits tho'
|
|
|
|
deedeeranged
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 325
Merit: 42
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2022, 05:10:19 PM |
|
I have a rig with 6 x 6700s and 6 Nvidia cards. Windows 10 with latest updates Has been working ok on 5.8 but has started causing me issues, generating errors on PM start: Failed to compile program: clBuildProgram (-11) Unable to prepare kernels: clCreateKernel (-46) Fatal error detected. Restarting. No idea why, has been working and stable(ish) for months. Maybe windows update. So, I thought it might be time to update, so updated gfx drivers and trying to update to 5.9d, but just starts and immediately exits ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) D:\Test>PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 Phoenix Miner 5.9d Windows/msvc - Release build -----------------------------------------------
CUDA version: 11.0, CUDA runtime: 8.0
D:\Test> Does the same on two of my other rigs, using both my config.txt and the default startminer.cmd Am I missing something stupid? So I managed to sort out my issues with 5.8. Windows was insisting on updating the drivers, I had been relying on the DDU option to prevent driver update but this did not seem to work. So I had to edit the local policy GPEDIT to prevent the AMD cards from getting updated https://www.howtogeek.com/263851/how-to-prevent-windows-from-automatically-updating-specific-drivers/Back to being stable Still no idea why PM 5.9 starts and immediately exits tho' What does nvidia-smi say abt cuda version?
|
|
|
|
BogBeast
Newbie
Offline
Activity: 6
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2022, 05:17:30 PM |
|
I have a rig with 6 x 6700s and 6 Nvidia cards. Windows 10 with latest updates Has been working ok on 5.8 but has started causing me issues, generating errors on PM start: Failed to compile program: clBuildProgram (-11) Unable to prepare kernels: clCreateKernel (-46) Fatal error detected. Restarting. No idea why, has been working and stable(ish) for months. Maybe windows update. So, I thought it might be time to update, so updated gfx drivers and trying to update to 5.9d, but just starts and immediately exits ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) D:\Test>PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 Phoenix Miner 5.9d Windows/msvc - Release build -----------------------------------------------
CUDA version: 11.0, CUDA runtime: 8.0
D:\Test> Does the same on two of my other rigs, using both my config.txt and the default startminer.cmd Am I missing something stupid? So I managed to sort out my issues with 5.8. Windows was insisting on updating the drivers, I had been relying on the DDU option to prevent driver update but this did not seem to work. So I had to edit the local policy GPEDIT to prevent the AMD cards from getting updated https://www.howtogeek.com/263851/how-to-prevent-windows-from-automatically-updating-specific-drivers/Back to being stable Still no idea why PM 5.9 starts and immediately exits tho' What does nvidia-smi say abt cuda version? C:\Windows\system32>nvidia-smi Tue Jan 25 17:14:28 2022 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 511.23 Driver Version: 511.23 CUDA Version: 11.6 | |-------------------------------+----------------------+----------------------+
|
|
|
|
Jameous
Newbie
Offline
Activity: 11
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 25, 2022, 08:07:19 PM |
|
I have a potato Asus PCIe2.0 with a RX580 8g (I7 12g ram) (driver fixed)
I'm finally using W10 after 7 was only giving me 1/3 hash I should have for a year (yes, I'm stubborn)
now, I'm getting the 28+hash I should have had instead of 8-9 at least, but...
I'm on 5.9d AND 21.11.3, but still have to use ckernal 0 to get it to work and that gives me abt 7-10% stales!
Is this normal? Even with the low hash before I never had this high a stale rate, and didnt have to use the ck0 until recently (on my old miner version with no NEW win 7 updates or drivers this started happening out of the blue)
Thanks for any ideas or help!!
For RX 580 I would recommend you to use driver version 21.3.2 or older. [/quote] Thanks! I got my 580 and my friends 2x570s on it and they are both goin pretty much full speed and after 10 hrs mine has NO stales!!
|
|
|
|
relax69
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 61
Merit: 40
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2022, 06:27:12 AM |
|
Back to being stable
Still no idea why PM 5.9 starts and immediately exits tho'
Just copy/paste the command line or config from V5.8 to V5.9, and it should work.
|
|
|
|
alucard20724
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2022, 07:28:59 AM |
|
The new beta version is ready. It is mostly a bugfix release, the more significant upgrades are coming next month. You can download PhoenixMiner 6.0a from here: The new features in this release are: - Full LHR disable mode -lhrdis <n> 1 - yes (default), 0 - no
- Show the GPU vendor name in the list of GPUs to make it easier to identify the GPUs
- Added support for the latest AMD Linux drivers 21.40.1. There are some bugs in these drivers, particularly the clocks and voltages can't be set properly with older
cards (RX4x0/RX5x0/Vega/RadeonVII) - Validated support for the latest AMD Windows drivers up to 21.11.2
- Fixed issues with AMD RX6700XT cards with the latest AMD and Linux drivers
- Fixed issues with AMD Vega and Radeon VII cards on latest Windows and Linux drivers
- Fixed crash with very old Nvidia drivers (3xx.x)
- Other fixes and small improvements
The updated list of known issues (driver incompatibilities, etc.) and workarounds: AMD Linux driver 21.40.1 has a bug preventing proper setting of clocks and voltages on older cards (RX4x0/RX5x0/Vega/RadeonVII). Given that these drivers are also usually slower than the older drivers for these cards, we recommend using Linux drivers 20.30 for anything older than RX6000 series. If you are using Linux drivers 21.40.1 with Radeon VII cards, you need to add the option -fpwm 1 in order to have proper fan control. AMD Linux drivers 21.40.1 has finally removed the requirement of PCIe atomics but there are problems when you try to mix Polaris (RX4x0/5x0) cards and Vega or newer cards on the same rig. Some Nvidia cards will report a lot of stale shares under Windows 11. Using the same driver version under Windows 10 resolves the issue. SCAM.. ITS NOT FROM OFFICIAL PHOENIXMINER SITE
|
|
|
|
pit63
Newbie
Offline
Activity: 22
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2022, 07:35:26 AM |
|
Latest version, on hiveos and windows, my GTX 1070 make only 27mhs. Before it was always above 30mhs.
How can i get with Phoenix 30mhs?
|
|
|
|
BogBeast
Newbie
Offline
Activity: 6
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2022, 08:10:38 AM |
|
Back to being stable
Still no idea why PM 5.9 starts and immediately exits tho'
Just copy/paste the command line or config from V5.8 to V5.9, and it should work. What usually works with upgrades before, but now, no... Won't even work with the supplied batch file.
|
|
|
|
TBOEMC
Jr. Member
Offline
Activity: 41
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2022, 03:23:55 PM Last edit: January 27, 2022, 06:44:14 PM by TBOEMC |
|
Latest version, on hiveos and windows, my GTX 1070 make only 27mhs. Before it was always above 30mhs. How can i get with Phoenix 30mhs?
Its longer time before GTX 1070 do about 27MHs, cause the TLB malfunction... The DAG is a killer to these cards (1070Ti are not affected). You can increase core clock +100 or +150 to keep speed around 27MHs, but it will be lower and lower with the DAG size. Increasing memory clocks above 600 or 700 does nothing now...
|
|
|
|
Deafran
Jr. Member
Offline
Activity: 49
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2022, 01:44:57 AM |
|
Latest version, on hiveos and windows, my GTX 1070 make only 27mhs. Before it was always above 30mhs.
How can i get with Phoenix 30mhs?
can u share ur setting pls ....
|
|
|
|
relax69
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 61
Merit: 40
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 28, 2022, 05:21:35 AM |
|
Back to being stable
Still no idea why PM 5.9 starts and immediately exits tho'
Just copy/paste the command line or config from V5.8 to V5.9, and it should work. What usually works with upgrades before, but now, no... Won't even work with the supplied batch file. Then I would try with older drivers. Dev's did not state anything about Nvidia drivers, but the one you using ( 511.23 ) is brand new released a couple of weeks ago.
|
|
|
|
deedeeranged
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 325
Merit: 42
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2022, 11:08:34 AM Merited by vapourminer (2) |
|
I have a rig with 6 x 6700s and 6 Nvidia cards. Windows 10 with latest updates Has been working ok on 5.8 but has started causing me issues, generating errors on PM start: Failed to compile program: clBuildProgram (-11) Unable to prepare kernels: clCreateKernel (-46) Fatal error detected. Restarting. No idea why, has been working and stable(ish) for months. Maybe windows update. So, I thought it might be time to update, so updated gfx drivers and trying to update to 5.9d, but just starts and immediately exits ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) D:\Test>PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal 0x008c26f3a2Ca8bdC11e5891e0278c9436B6F5d1E.Rig001 Phoenix Miner 5.9d Windows/msvc - Release build -----------------------------------------------
CUDA version: 11.0, CUDA runtime: 8.0
D:\Test> Does the same on two of my other rigs, using both my config.txt and the default startminer.cmd Am I missing something stupid? So I managed to sort out my issues with 5.8. Windows was insisting on updating the drivers, I had been relying on the DDU option to prevent driver update but this did not seem to work. So I had to edit the local policy GPEDIT to prevent the AMD cards from getting updated https://www.howtogeek.com/263851/how-to-prevent-windows-from-automatically-updating-specific-drivers/Back to being stable Still no idea why PM 5.9 starts and immediately exits tho' What does nvidia-smi say abt cuda version? C:\Windows\system32>nvidia-smi Tue Jan 25 17:14:28 2022 +-----------------------------------------------------------------------------+ | NVIDIA-SMI 511.23 Driver Version: 511.23 CUDA Version: 11.6 | |-------------------------------+----------------------+----------------------+ Try uninstalling/clear the driver with DDU and re-install the driver and if that does not work try an older driver. Don't let windows try to install the drivers. Also install/re-install previous driver from AMD as the one installed might be to new (clBuildProgram error) Use -acm to activate compute mode for AMD.
|
|
|
|
mrbugera2
Jr. Member
Offline
Activity: 85
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 02, 2022, 08:15:10 AM Last edit: February 02, 2022, 10:05:29 AM by mprep Merited by vapourminer (1) |
|
|
|
|
|
batsonxl
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1200
Merit: 26
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 04, 2022, 12:46:48 PM |
|
Hi all,
I posted this question couple of days before, but was deleted. I wonder why, since it's fully on-topic, and perhaps a simptom of a problem woth PhoenixMiner (or it's just me, but the question is honest). Well, the cas is I got an out of memory problem mining ETC (eth classic) with my 3GB nVidia GTX1060, since a couple of days ago. Coincidentally with change to epoch #238 (5.9d say's to be good up to epoch #240 and 3gb cards should be able to mine etc until june/22 or so). Any one with the same issue?
This is the command line: ./PhoenixMiner -pool us1-etc.ethermine.org:4444 -wal 0xblablabla -worker myworker -pass x -coin etc
This is the output: Phoenix Miner 5.9d Linux/gcc - Release build --------------------------------------------
CUDA version: 11.0, CUDA runtime: 8.0 NVML library initialized Nvidia driver version: 470.86 OpenCL driver version: 20.40-1147287 Available GPUs for mining: GPU1: ASUS NVIDIA GeForce GTX 1060 3GB (pcie 1), CUDA cap. 6.1, 3 GB VRAM, 9 CUs
GPU2: ASUS NVIDIA GeForce GTX 1060 3GB (pcie 2), CUDA cap. 6.1, 3 GB VRAM, 9 CUs
Eth: the pool list contains 1 pool (1 from command-line) Eth: primary pool: us1-etc.ethermine.org:4444 Starting GPU mining Eth: Connecting to ethash pool us1-etc.ethermine.org:4444 (proto: EthProxy) GPU1: 35C 26% 7W, GPU2: 36C 27% 40W GPUs power: 47.1 W Eth: Connected to ethash pool us1-etc.ethermine.org:4444 (172.65.245.119) Listening for CDM remote manager at port 3333 in read-only mode Eth: New job #e801904e from us1-etc.ethermine.org:4444; diff: 4000MH GPU1: Starting up... (0) GPU1: Generating etchash light cache for epoch #238 GPU2: Starting up... (0) Eth: New job #764e3116 from us1-etc.ethermine.org:4444; diff: 4000MH Light cache generated in 2.0 s (22.7 MB/s) GPU2: Allocating DAG (2.87) GB; good for epoch up to #240 GPU2: Generating DAG for epoch #238 GPU1: Allocating DAG (2.87) GB; good for epoch up to #240 CUDA error in CudaProgram.cu:393 : out of memory (2) GPU1: CUDA memory: 2.95 GB total, 2.87 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. GPU2 initMiner error: Unable to initialize CUDA miner Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00 GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0)
Hope somebody could help, and thanks in advance for any hint,
Try add this -eres 0 maybe helps for 2 more epoch. but anyway they will stop later
|
|
|
|
|