soothaa
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 02:34:10 PM Merited by vapourminer (1) |
|
Thank you for trying to help ! Unfortunately it doesn't seems to be enough ! I do it each time I roll back, but it finally end installing the update anyway ... (generally I wake up and see the rig is down, then I check and see the fall creators update is installed ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) ) I have all Microsoft domains blocked from my entire network via a DNS hole.
|
|
|
|
bubbAJoe
Newbie
Offline
Activity: 50
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 03:17:53 PM |
|
yeah that makes me nervous too. potentially ~2000 watts if your cards come up at full power due to whatever. are there any published specs on what the upper power limit per card is for this board?
How does it work for GPUs that require 8+6/8+8 power connections? You can just bypass those onboard power connections and plug directly into the GPU, correct?
|
|
|
|
jimmykl
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 03:23:01 PM |
|
Can someone explain how all those 16 PCIe power connectors on that board are used? The connectors on the short end are power inputs and the connectors on the long end are outputs??You got it figured. So if you're powering a GTX 1080 Ti that uses 250 watts and power is supplied by 2x 8 pin PCIe power connectors, you'd feed the power to the board on the short side. That single lead would give the board the bus power it needs and then the power for the cards would route through the board out the long side connector to a double headed PCIe power lead to the top of the GPU? I can see how cabling and wire management would be neat and clean. BUT, seems like you'd be pushing a ton of watts through the board as a result. Maybe run the cards direct from the PSU not through the board? If it's like the clone mobos then you can run the pcie to the board with splitters because they're just powering the pcie slots etc.
|
|
|
|
dragonmike
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 03:35:04 PM |
|
Thank you for trying to help ! Unfortunately it doesn't seems to be enough ! I do it each time I roll back, but it finally end installing the update anyway ... (generally I wake up and see the rig is down, then I check and see the fall creators update is installed ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) ) Have you tried setting your connection as metered? That prevents Windows from downloading the updates. Then again maybe you're past that stage, i.e. it's already downloaded and is just waiting for you to go afk to reinstall it cheekily! ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
gregfromo
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 134
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 03:40:35 PM |
|
Thank you for trying to help ! Unfortunately it doesn't seems to be enough ! I do it each time I roll back, but it finally end installing the update anyway ... (generally I wake up and see the rig is down, then I check and see the fall creators update is installed ![Cry](https://bitcointalk.org/Smileys/default/cry.gif) ) follow this https://www.rizonesoft.com/disable-windows-10-updates-group-policies/
|
|
|
|
vg54dett
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 04:08:34 PM |
|
thanks guys, giving a try!
|
|
|
|
deadsix
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 04:16:43 PM |
|
Genesis Mining switched to using these Onda/Colorful style B250 based motherboards for their latest facility. https://www.youtube.com/watch?v=W43Vl8FeIfAYou can see the systems they are using near the end of the video - clearly 8GPU riserless systems. Now I wonder if they are the customers that the new "soldered CPU" boards were built for ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
cryptoinvestor_x
Newbie
Offline
Activity: 71
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 04:39:31 PM |
|
The Onda boards seem fairly cost efficient. Only issue is cooling but if it's in a server rack style with fans it's a non-issue
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 04:47:11 PM |
|
So if you're powering a GTX 1080 Ti that uses 250 watts and power is supplied by 2x 8 pin PCIe power connectors, you'd feed the power to the board on the short side. That single lead would give the board the bus power it needs and then the power for the cards would route through the board out the long side connector to a double headed PCIe power lead to the top of the GPU? I can see how cabling and wire management would be neat and clean. BUT, seems like you'd be pushing a ton of watts through the board as a result. yeah that makes me nervous too. potentially ~2000 watts if your cards come up at full power due to whatever. are there any published specs on what the upper power limit per card is for this board? I talked about this on another board like this the k17 you can not run more then 3 1080ti's using the board pass through so you do the other 5 1080ti direct from the psu to 5 of the 1080ti. and feed 6 cables from the board into 3 1080ti.s then 3 x 200 please don't set 250 for tdp and some juice in the five slots to the 5 1080ti's means under 1000 watts pass through the board
|
|
|
|
TheYankeesWin!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 04:48:43 PM |
|
What are your opinions about 1080ti founders edition? I can choose from Gainward, Asus and Gigabyte.
Also, I could get a close price for palit 1070ti or evga 1080 watercooled? Which one would you choose to build a rig from above (1080ti founder, 1080 watercooled or 1070ti)?? I will do it with risers.
Thanks
RISERS = lots of spacing so you do not need waterblocks
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 04:50:01 PM |
|
The Onda boards seem fairly cost efficient. Only issue is cooling but if it's in a server rack style with fans it's a non-issue
Onda are great with EVGA Hybrid and MSI seahawk my major builds are 1080ti hybrid evga or msi 1080ti seahawk.
|
|
|
|
GabryRox
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 06:39:57 PM |
|
thanks guys, giving a try!
Have you tried re-installing your old AMD drivers? I mistakenly installed this update on 1 of my rigs last weekend and in the process, it installed newer drivers that were rendering my 470's useless. Once I rolled back to the old drivers it works fine now. Granted, I wasted half a day re-installing about 4 times because I forgot that you have to run pixel-patcher after installing any recent AMD drivers, but as long as you run DDU in safe mode, then install your go-to drivers, then run PP, it should work.
|
|
|
|
rs1x
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 07:13:46 PM |
|
thanks guys, giving a try!
Have you tried re-installing your old AMD drivers? I mistakenly installed this update on 1 of my rigs last weekend and in the process, it installed newer drivers that were rendering my 470's useless. Once I rolled back to the old drivers it works fine now. Granted, I wasted half a day re-installing about 4 times because I forgot that you have to run pixel-patcher after installing any recent AMD drivers, but as long as you run DDU in safe mode, then install your go-to drivers, then run PP, it should work. AMD drivers were 2/3rd the reason I sold my RX cards and flipped to NVIDIA. I was pretty tired of DDU / Install, pixel patch , restart, cross fingers.
|
|
|
|
soothaa
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 07:57:58 PM |
|
thanks guys, giving a try!
Have you tried re-installing your old AMD drivers? I mistakenly installed this update on 1 of my rigs last weekend and in the process, it installed newer drivers that were rendering my 470's useless. Once I rolled back to the old drivers it works fine now. Granted, I wasted half a day re-installing about 4 times because I forgot that you have to run pixel-patcher after installing any recent AMD drivers, but as long as you run DDU in safe mode, then install your go-to drivers, then run PP, it should work. AMD drivers were 2/3rd the reason I sold my RX cards and flipped to NVIDIA. I was pretty tired of DDU / Install, pixel patch , restart, cross fingers. Dude SMOS makes all that a thing of the past. I wouldn't dream of getting more nVidia cards with how totally stable SMOS + AMD is.
|
|
|
|
MagicSmoker
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 08:36:38 PM |
|
Have you tried re-installing your old AMD drivers? I mistakenly installed this update on 1 of my rigs last weekend and in the process, it installed newer drivers that were rendering my 470's useless. Once I rolled back to the old drivers it works fine now. Granted, I wasted half a day re-installing about 4 times because I forgot that you have to run pixel-patcher after installing any recent AMD drivers, but as long as you run DDU in safe mode, then install your go-to drivers, then run PP, it should work.
AMD drivers were 2/3rd the reason I sold my RX cards and flipped to NVIDIA. I was pretty tired of DDU / Install, pixel patch , restart, cross fingers. I am beginning to understand this sentiment... I moved some cards around yesterday and ended up putting an RX 570 on a board that previously had a GTX 1080. Before I removed the 1080 I selected "clean and shutdown" in DDU because that seemed like it would save some time with Windows freaking out about the different GPU and resetting the display to 1024 x 768. I was not too pleased when I finally powered up the rig with the new 1080 installed and got a "no bootable media found" error. Ended up having to repartition the hdd, format it and reinstall Windows from scratch because I absolutely could not get the bootrec to rebuild the BCD. Then of course I completely forgot about Pixel Patcher and spent another hour trying wondering why my screen was at the correct resolution of 1280 x 1024 but MSI AB said there was no driver installed and none of my miners would work. If I had learned something from this experience it wouldn't have been a total waste, but I have no idea why or how DDU managed to delete/corrupt "critical system files" as that was the only explanation I got from searching online for the various errors reported during my unsuccessful attempts to recover the existing installation.
|
|
|
|
Xapodat
Newbie
Offline
Activity: 35
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 08:46:57 PM |
|
So if you're powering a GTX 1080 Ti that uses 250 watts and power is supplied by 2x 8 pin PCIe power connectors, you'd feed the power to the board on the short side. That single lead would give the board the bus power it needs and then the power for the cards would route through the board out the long side connector to a double headed PCIe power lead to the top of the GPU? I can see how cabling and wire management would be neat and clean. BUT, seems like you'd be pushing a ton of watts through the board as a result. yeah that makes me nervous too. potentially ~2000 watts if your cards come up at full power due to whatever. are there any published specs on what the upper power limit per card is for this board? Not many people will run the cards at the full power if there is electricity to pay. I only run them at around 60-70% to get higher efficiency.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4452
Merit: 3969
what is this "brake pedal" you speak of?
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 09:10:05 PM |
|
yeah that makes me nervous too. potentially ~2000 watts if your cards come up at full power due to whatever. are there any published specs on what the upper power limit per card is for this board?
Not many people will run the cards at the full power if there is electricity to pay. I only run them at around 60-70% to get higher efficiency. programs used to power limit cards sometimes fail for whatever reason. ive woke up to my cards at 100% a couple times. i still test my rigs at full power for a day just to stress test them and check temps at power outlets, psu connectors etc. that way no worries about the odd crash and reboot causing overheat problems with cards or melting connectors with all cards at 100% for prolonged periods when im not around.
|
|
|
|
Elder III
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 10:37:22 PM |
|
yeah that makes me nervous too. potentially ~2000 watts if your cards come up at full power due to whatever. are there any published specs on what the upper power limit per card is for this board?
Not many people will run the cards at the full power if there is electricity to pay. I only run them at around 60-70% to get higher efficiency. programs used to power limit cards sometimes fail for whatever reason. ive woke up to my cards at 100% a couple times. i still test my rigs at full power for a day just to stress test them and check temps at power outlets, psu connectors etc. that way no worries about the odd crash and reboot causing overheat problems with cards or melting connectors with all cards at 100% for prolonged periods when im not around. Yep, I do the same thing for the exact same reason. It's always wise to prepare for the worst so that you don't destroy hardware (or worse) if and when the worst eventually happens. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
GabryRox
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2018, 11:51:18 PM |
|
Well, after numerous days of not being able to get any GPU despite being on every auto-notify list known to man, I was able to procure 2 Asus rog-strix 1080 A8G Gaming cards today from an unexpected source. The Employee Purchase store of my employer apparently got some of these and also the 1080ti equivalent in today. This also happened earlier in the week but i missed out on it as I wasn't able to get in within the first 5 minutes. Today i got really lucky as they sent the notice out at like 3pm and most people were already gone for the day i think lol. Cost was $550, which is probably just above regular retail for these but in this market, I snapped up 2 of them pronto. Ideally, was looking for more 1070ti's but i think the only real benefit to those is that they are better on ETH, and I've got this rig mining ZCL anyway so shouldn't matter much. And this will let me finally complete this rig that's been running with only 4 GPUs for 2 weeks lol, so it's all good.
The only slight PITA is that these are 8+6 connectors and I only have single 8-pin PSU cables left. But, I assume 8+6 splitters should be relatively easy to find, so looking for those next. Or... is this even needed? meaning, could i just plug by single 8-pin PSU cable into those GPUs and still have it work fine? I only plan to run these at max 70% anyway, so not real sure if that extra 6-pin is needed or if there is an actual difference power wise in adding a 8+6 adapter when the power is still coming from a single PSU cable.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2018, 12:22:57 PM Last edit: January 27, 2018, 01:01:53 PM by philipma1957 |
|
Well, after numerous days of not being able to get any GPU despite being on every auto-notify list known to man, I was able to procure 2 Asus rog-strix 1080 A8G Gaming cards today from an unexpected source. The Employee Purchase store of my employer apparently got some of these and also the 1080ti equivalent in today. This also happened earlier in the week but i missed out on it as I wasn't able to get in within the first 5 minutes. Today i got really lucky as they sent the notice out at like 3pm and most people were already gone for the day i think lol. Cost was $550, which is probably just above regular retail for these but in this market, I snapped up 2 of them pronto. Ideally, was looking for more 1070ti's but i think the only real benefit to those is that they are better on ETH, and I've got this rig mining ZCL anyway so shouldn't matter much. And this will let me finally complete this rig that's been running with only 4 GPUs for 2 weeks lol, so it's all good.
The only slight PITA is that these are 8+6 connectors and I only have single 8-pin PSU cables left. But, I assume 8+6 splitters should be relatively easy to find, so looking for those next. Or... is this even needed? meaning, could i just plug by single 8-pin PSU cable into those GPUs and still have it work fine? I only plan to run these at max 70% anyway, so not real sure if that extra 6-pin is needed or if there is an actual difference power wise in adding a 8+6 adapter when the power is still coming from a single PSU cable.
Those are decent cards what psu do you have for them. I may have cables. --server equihash.usa.nicehash.com --user 16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.K17six --pass x --port 3357 --pec --server equihash.usa.nicehash.com --port 3357 --user 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje --pass x --server equihash.usa.nicehash.com --user 16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.solar --pass x --port 3357 --pec --server equihash.usa.nicehash.com --user 16yLHLoeyuCLPMXkVpC3gyrRYvwRGwjKJr.solar --pass x --port 3357 --pec
|
|
|
|
|