tavogl
Newbie
Offline
Activity: 25
Merit: 0
|
|
February 14, 2018, 04:18:30 AM |
|
I've installed the RAM, plugged in 2 PCI-E cables as per the quick start guide but then turning the PSU on does not power on the board.
OK. Please contact us through our website Live Support chat and we will help you get your board up and running. I have tried 2 other boards with 2 different PSUs and none of them is able to power on. Turns out I needed to plug a dummy plug/jumper into the 24 pin which wasn't mentioned anywhere. Glad to hear you got the problem sorted out. We actually included "ATX JUMPER PIN" adapters with all the ATX PSUs so our clients do not have to make their own jumpers. Unfortunately for the first few orders our shipping agent forgot to include those. Sorry for the inconvenience. https://octominer.com/wp-content/uploads/2018/02/IYr2oES.jpgGood to know!
|
|
|
|
NameTaken
|
|
February 14, 2018, 04:18:49 AM |
|
I've installed the RAM, plugged in 2 PCI-E cables as per the quick start guide but then turning the PSU on does not power on the board.
OK. Please contact us through our website Live Support chat and we will help you get your board up and running. I have tried 2 other boards with 2 different PSUs and none of them is able to power on. Turns out I needed to plug a dummy plug/jumper into the 24 pin which wasn't mentioned anywhere. Glad to hear you got the problem sorted out. We actually included "ATX JUMPER PIN" adapters with all the ATX PSUs so our clients do not have to make their own jumpers. Unfortunately for the first few orders our shipping agent forgot to include those. Sorry for the inconvenience. I just ordered the motherboard and RAM.
|
|
|
|
octominer
Jr. Member
Offline
Activity: 248
Merit: 8
|
|
February 14, 2018, 04:47:58 AM |
|
The next problem I'm facing is setting the primary VGA from internal to PCI. Quick start guide says "under graphics configuration "Primary Display" mush be set to PCI" but I can not find that BIOS setting anywhere.
OK, no problem. I added some pictures, please check over these settings in BIOS:
|
|
|
|
NameTaken
|
|
February 14, 2018, 04:48:35 AM |
|
Thanks, I found it eventually.
|
|
|
|
NameTaken
|
|
February 14, 2018, 05:31:46 AM |
|
Here it is running with 5 GTX 1070Tis:
|
|
|
|
Zepp74
Newbie
Offline
Activity: 57
Merit: 0
|
|
February 14, 2018, 05:33:04 AM |
|
Well I just made my first purchase of a full setup from octominer. I am excited but see I have to wait till mid march for the next batch of motherboards before delivery. I also didn't realize there are additional shipping fees that I will have to pay the dhl guy upon delivery either.
|
|
|
|
octominer
Jr. Member
Offline
Activity: 248
Merit: 8
|
|
February 14, 2018, 06:29:13 AM |
|
Here it is running with 5 GTX 1070Tis: You can peel the blue protective film coating off the cooler to reveal the metal underneath. The blue film is there for protection during handling and shipping.
|
|
|
|
Elder III
|
|
February 14, 2018, 06:36:24 AM |
|
I've installed the RAM, plugged in 2 PCI-E cables as per the quick start guide but then turning the PSU on does not power on the board.
OK. Please contact us through our website Live Support chat and we will help you get your board up and running. I have tried 2 other boards with 2 different PSUs and none of them is able to power on. Turns out I needed to plug a dummy plug/jumper into the 24 pin which wasn't mentioned anywhere. Glad to hear you got the problem sorted out. We actually included "ATX JUMPER PIN" adapters with all the ATX PSUs so our clients do not have to make their own jumpers. Unfortunately for the first few orders our shipping agent forgot to include those. Sorry for the inconvenience. Are these 24 pin dummy plugs only needed for ATX style PSUs I assume? We'll be using a server PSU so I'm fairly sure that we won't need the dummy plugs...? I figured I'd ask to be sure while I'm waiting for other parts to arrive. Well I just made my first purchase of a full setup from octominer. I am excited but see I have to wait till mid march for the next batch of motherboards before delivery. I also didn't realize there are additional shipping fees that I will have to pay the dhl guy upon delivery either.
We did not have to pay anything extra upon delivery here in the USA. I believe it all depends on the laws of your country in regards to imports, customs, duty fees etc...
|
|
|
|
NameTaken
|
|
February 14, 2018, 06:41:22 AM |
|
Here it is running with 5 GTX 1070Tis: You can peel the blue protective film coating off the cooler to reveal the metal underneath. The blue film is there for protection during handling and shipping. Thanks for the tip. I ordered the 3855U model and just noticed this CPU is a 4405U. processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 78 model name : Intel(R) Pentium(R) CPU 4405U @ 2.10GHz stepping : 3 microcode : 0x9e cpu MHz : 1558.593 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm abm 3dnowprefetch epb intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust erms invpcid rdseed smap clflushopt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : bogomips : 4224.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management:
processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 78 model name : Intel(R) Pentium(R) CPU 4405U @ 2.10GHz stepping : 3 microcode : 0x9e cpu MHz : 1408.374 cache size : 2048 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 2 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm abm 3dnowprefetch epb intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust erms invpcid rdseed smap clflushopt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : bogomips : 4224.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management:
processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 78 model name : Intel(R) Pentium(R) CPU 4405U @ 2.10GHz stepping : 3 microcode : 0x9e cpu MHz : 1655.621 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm abm 3dnowprefetch epb intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust erms invpcid rdseed smap clflushopt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : bogomips : 4224.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management:
processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 78 model name : Intel(R) Pentium(R) CPU 4405U @ 2.10GHz stepping : 3 microcode : 0x9e cpu MHz : 784.808 cache size : 2048 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 3 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 22 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave rdrand lahf_lm abm 3dnowprefetch epb intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust erms invpcid rdseed smap clflushopt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp bugs : bogomips : 4224.00 clflush size : 64 cache_alignment : 64 address sizes : 39 bits physical, 48 bits virtual power management:
|
|
|
|
octominer
Jr. Member
Offline
Activity: 248
Merit: 8
|
|
February 14, 2018, 06:45:27 AM |
|
Here it is running with 5 GTX 1070Tis: You can peel the blue protective film coating off the cooler to reveal the metal underneath. The blue film is there for protection during handling and shipping. Thanks for the tip. I ordered the 3855U model and just noticed this CPU is a 4405U. Yes, some of the motherboards from the 3855u batch came with upgraded CPU's , we decided to sell them for the same price for this batch.
|
|
|
|
Yars
Newbie
Offline
Activity: 31
Merit: 0
|
|
February 14, 2018, 07:41:15 AM |
|
Try to ask about another carrier like EMS or regular post. They also provide tracking number. Delivery time could be longer, but you definitely will receive your order.
I Ordered 5 Onda D1800 motherboards recently from Letine/Alibaba and got them shipped via DHL using the same address, so I'm wondering why they can't ship? Anyway will try to ask for another shipment method. Hi! We understand your frustration and we are sorry for not being able to ship to your country at the moment. As we stated the reason for not being able to ship out was because there are more regulations and paperwork to fill out to ship to your country and we did not meet the shipping deadline because of the Chinese New Year Holiday that just started in China. If it were not for the Holidays then we could have shipped out your order. Again, we are truly sorry for the inconvenience we caused you. After the Holidays end at the end of February we can still ship out your order if you are interested. Thanks for your replay, guess I have no other choice, I will wait then. I will send you an email to confirm, thank you.
|
|
|
|
NameTaken
|
|
February 14, 2018, 08:22:10 AM |
|
The CPU fan spins at 100% making a high pitched sound louder than all my GPUs so is there a way to reduce it?
|
|
|
|
jimmykl
|
|
February 14, 2018, 09:24:27 AM |
|
Well I know where my next riserless motherboards will be coming from! Based on what I've seen in this thread: responsive to questions + pushing to get shipments away before a major national holiday + shipping upgraded cpus because they are in stock rather than delaying the orders = great stuff!
|
|
|
|
Jbh129
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 14, 2018, 10:02:36 AM |
|
https://imgur.com/gallery/YCEugI have been very satisfied with my new board and case though I would note 2 issues that I have come across: 1. I needed to remove one exhaust fan in order to connect the video out on my first gpu, and 2. I cannot find the pin layout for the front panel of the case. That being said, the price to value of this kit is very nice.
|
|
|
|
FrenchinHK
|
|
February 14, 2018, 11:17:26 AM |
|
Already looks too full with only 4 cards . . .
|
|
|
|
octominer
Jr. Member
Offline
Activity: 248
Merit: 8
|
|
February 14, 2018, 11:21:22 AM |
|
Already looks too full with only 4 cards . . .
It's a bit packed but works perfectly fine with the case and the fans cooling. 8x 1060 will run around 55c in a 25-35C ambient environment.
|
|
|
|
CryptoDocker
Jr. Member
Offline
Activity: 122
Merit: 1
|
|
February 14, 2018, 11:22:17 AM |
|
Already looks too full with only 4 cards . . .
It's a bit packed but works perfectly fine with the case and the fans cooling. 8x 1060 will run around 55c in a 25-35C ambient environment. octominer do you have the pin layout somewhere for the case you can upload?
|
|
|
|
octominer
Jr. Member
Offline
Activity: 248
Merit: 8
|
|
February 14, 2018, 11:32:13 AM |
|
Already looks too full with only 4 cards . . .
It's a bit packed but works perfectly fine with the case and the fans cooling. 8x 1060 will run around 55c in a 25-35C ambient environment. octominer do you have the pin layout somewhere for the case you can upload? The pin layout is printed on the motherboard, it's a bit tricky to spot it at first. I added a photo of it.
|
|
|
|
NobodyIsHome
Jr. Member
Offline
Activity: 74
Merit: 1
|
|
February 14, 2018, 01:10:28 PM |
|
What's the 4-pin header right beside the SATA connector?
|
|
|
|
proteus7
Newbie
Offline
Activity: 106
Merit: 0
|
|
February 14, 2018, 02:04:50 PM |
|
Planning to put 8x1080ti in mine. These are blower cards, so hoping they'll be ok? with 7 delta fans in the chassis, they should be...?
|
|
|
|
|