[ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins

[rrvviigg11]

Hey there, i am wondering if i can run an antminer on zergpool.

I like this pool, running my gpus currently and wondering if there is profit to make with antminers on this pool.

[pinpins]

Hey there, i am wondering if i can run an antminer on zergpool.

I like this pool, running my gpus currently and wondering if there is profit to make with antminers on this pool.

Yes, SHA256 coins has been added, and growing, you can give it a try

[fuelrod]

Zergpool administrators,

Can someone tell me how often the http://api.zergpool.com:8080/api/status page updates, 1 min, 5 min, longer, shorter?  Also could you estimate the delay, i.e. how far back in history was the estimated_current value calculated?  Was the estimated_current value from 1 min ago, 5 min, longer, shorter?  An answer is greatly appreciated.  Great pool so far, thanks.

Hi,

We trigger updated every 15 seconds, to collect data takes like 30-60 sec.
So I would say API refreshes every 1.5 min, however from my mining experience, I would not recommend to switch over more frequently than 5mins. As you spend time to reload miner to different algo(program)

Thank you for the response.  Can I assume the http://api.zergpool.com:8080/api/currencies page is updated about the same, refreshes about every 1.5 min?

[bamz0730]

until now pool still not get block XZC
my payment need wait until get block but if 3 month still not get block so how about my payment

[vipsvvvv]

something is not right wth the skunk algo,  stratum connection falied , keep restarting the miner but chooses the skunk algo again and again

[c8emens]

Dear team of Zergpool.

there seems to be a serious Problem with the ACP- myriad groestl pool.
THe pool is showing wrong nethasratets and is not functional .

at the moment ( 08.05.2018. 08:36 MEZ) displaying:
AnarchistsPr (myr-gr)   32 ACP   66.186 M   258 166   7 months   5 Gh/s   0.00000

Difficulty and profitability are wrong and the pool cannnot be used .

PLEASE HELP !

[BitBustah]

Any idea when I can expect my 41 BSD? Got expenses to pay...


The pool is short 360+ BSD. I'm sending you a PM with my wallet address.
Please send me my bitsend. Thanks.

[rrvviigg11]

How would the URL and difficulty settings look like to run an Bitmain s9 at 13,5TH optimal on zergpool?

As there is no intructions on theire page. Could you please add for us noobies.
Best regards

[Raimundo84]

hi administs. I was waiting for the payment this Sunday from INCOIN given that my power is not very high and I still have not been paid .. in fact the coin does not appear in your pool and until 3 days ago I think it was. attached address incoin. A greeting and thanks in advance https://zergpool.com/?address=3XnV78KBzNechG84ieFfTkj7xjKBWrZ3mv

[pinpins]

hi administs. I was waiting for the payment this Sunday from INCOIN given that my power is not very high and I still have not been paid .. in fact the coin does not appear in your pool and until 3 days ago I think it was. attached address incoin. A greeting and thanks in advance https://zergpool.com/?address=3XnV78KBzNechG84ieFfTkj7xjKBWrZ3mv

Hi,

This coin is almost as dead, I am struggling to find anynodes still alive.
Do you have some to sync up and continue?

pinpin

[Raziel666]

I started mining QBIC yesterday night, having these

Code:

-p c=QBIC,mc=QBIC

as my options (per the first page's instructions).

Regardless, I'm seeing that in addition to finding QBIC shares, I find Feathercoin, GoByte and Vivo shares and the shares seem to be going to an exchange after maturing.

Is there a problem I should know about?

[pinpins]

I started mining QBIC yesterday night, having these

Code:

-p c=QBIC,mc=QBIC

as my options (per the first page's instructions).

Regardless, I'm seeing that in addition to finding QBIC shares, I find Feathercoin, GoByte and Vivo shares and the shares seem to be going to an exchange after maturing.

Is there a problem I should know about?

Hi,

it usually can spend 3-4 shares in a beginning to other coins until it switches to QBIC. So very little amount is fine, and you should to be worried.

[Raziel666]

I started mining QBIC yesterday night, having these

Code:

-p c=QBIC,mc=QBIC

as my options (per the first page's instructions).

Regardless, I'm seeing that in addition to finding QBIC shares, I find Feathercoin, GoByte and Vivo shares and the shares seem to be going to an exchange after maturing.

Is there a problem I should know about?

Hi,

it usually can spend 3-4 shares in a beginning to other coins until it switches to QBIC. So very little amount is fine, and you should to be worried.

The thing is it's not in the beginning, but after several hours. And what about the exchange part, are my QBIC shares sent to an exchange to be changed to... QBIC?!

[Raimundo84]

pues ya podrian avisar como en otros pools pequeños que una moneda la van a retirar para no seguir mineando... una semana de consumo de electricidad a la basura viva! que poca vergüenza... en fin..

[dragonmike]

Pinpin, please sort out the vit pool. You're advertising it in the thread but the stratum connection gets rejected... and the pool doesn't even show on the front page.

[Dalba]

Hello Pinpins,
Just a small advice, but you should look at Zixx coin (XZX), based on neoscrypt and exchangeable at cryptobridge. It begins to be quite "hot" to mine. And as you already successfully set rvn to be auto-exchangeable on cryptobridge, you may be able to do the same with it...  

[BitBustah]

Any news on my "49.26486466 BSD"?

Please pay me, I have expenses to pay.

[minerja]

Hi Guys,
ok so i follow these instructions from the pool

GETTING STARTED FOR NVIDIA GPU MINING

    Below instructon for quick start using Windows systems
    1. Download Nvidia drivers 384.xx or above
    2. Download latest Zergpool SniffDog fork package from GitHub: https://github.com/pinpins/Sniffdogminer/releases
    3. Unzip and Edit the startsniffin_Zergpool_Bitcoin.bat file with notepad
    4. Change the -Wallet 1AMQg6m9GPDN9HGuC3wJGpSuiZr1XQXjxi to your BTC wallet address
    5. Save the file, and run just modified bat file
    6. Wait about 30 mins, so SniffDog benchmark your system performance for each algo. Afterwards it will automatically choose the most profitable algorithm to mine at the time, and perform auto switch every 5 minutes.

Basically i get a blue window come up says "snoopdog in da house" it stays open for a short while then closes.

After this happened 40 times i got bored....
Nothing else seeems to be happening.
I had a hashrate for the 1st line, that was all

Any ideas?
Win10, nvidia cards
J

[BitBustah]

Hi Guys,
ok so i follow these instructions from the pool

GETTING STARTED FOR NVIDIA GPU MINING

    Below instructon for quick start using Windows systems
    1. Download Nvidia drivers 384.xx or above
    2. Download latest Zergpool SniffDog fork package from GitHub: https://github.com/pinpins/Sniffdogminer/releases
    3. Unzip and Edit the startsniffin_Zergpool_Bitcoin.bat file with notepad
    4. Change the -Wallet 1AMQg6m9GPDN9HGuC3wJGpSuiZr1XQXjxi to your BTC wallet address
    5. Save the file, and run just modified bat file
    6. Wait about 30 mins, so SniffDog benchmark your system performance for each algo. Afterwards it will automatically choose the most profitable algorithm to mine at the time, and perform auto switch every 5 minutes.

Basically i get a blue window come up says "snoopdog in da house" it stays open for a short while then closes.

After this happened 40 times i got bored....
Nothing else seeems to be happening.
I had a hashrate for the 1st line, that was all

Any ideas?
Win10, nvidia cards
J

You need to try another miner for that algo.

[minerja]

Hi Guys,
ok so i follow these instructions from the pool

GETTING STARTED FOR NVIDIA GPU MINING

    Below instructon for quick start using Windows systems
    1. Download Nvidia drivers 384.xx or above
    2. Download latest Zergpool SniffDog fork package from GitHub: https://github.com/pinpins/Sniffdogminer/releases
    3. Unzip and Edit the startsniffin_Zergpool_Bitcoin.bat file with notepad
    4. Change the -Wallet 1AMQg6m9GPDN9HGuC3wJGpSuiZr1XQXjxi to your BTC wallet address
    5. Save the file, and run just modified bat file
    6. Wait about 30 mins, so SniffDog benchmark your system performance for each algo. Afterwards it will automatically choose the most profitable algorithm to mine at the time, and perform auto switch every 5 minutes.

Basically i get a blue window come up says "snoopdog in da house" it stays open for a short while then closes.

After this happened 40 times i got bored....
Nothing else seeems to be happening.
I had a hashrate for the 1st line, that was all

Any ideas?
Win10, nvidia cards
J

You need to try another miner for that algo.

I just followed the instructions, so i'll need a bit more help that that please....

https://ibb.co/f2WoMJ
This is what i get