[ANN] StarTrek insipred coins =) and mining links (Low Diff) Nice Bounties!

[mogrith]

Trying to mine UFC using bfgminer (it's what I have installed) on ufccoin pool

I registered and created a worker.

bfgminer is connected getting work from pool. But every block I find is rejected

Code:

 [2013-09-30 21:32:46] Stratum from pool 0 requested work update
 [2013-09-30 21:32:55] Found block for pool 0!
 [2013-09-30 21:32:55] Rejected 0149a41e ICA 1  pool 0 Diff 198/32 (Share is abo
ve target)
 [2013-09-30 21:33:01] Found block for pool 0!
 [2013-09-30 21:33:02] Rejected 038c2742 ICA 2  pool 0 Diff 72/32 (Share is abov
e target)
 [2013-09-30 21:33:02] Network difficulty changed to 0 ( 1.22Mh/s)
 [2013-09-30 21:33:02] Stratum from pool 0 detected new block

also bfg reporting 2.2GH/s ufccoin says 52KH/s after almost 1 hr

[tokyoghetto]

Trying to mine UFC using bfgminer (it's what I have installed) on ufccoin pool

I registered and created a worker.

bfgminer is connected getting work from pool. But every block I find is rejected

Code:

 [2013-09-30 21:32:46] Stratum from pool 0 requested work update
 [2013-09-30 21:32:55] Found block for pool 0!
 [2013-09-30 21:32:55] Rejected 0149a41e ICA 1  pool 0 Diff 198/32 (Share is abo
ve target)
 [2013-09-30 21:33:01] Found block for pool 0!
 [2013-09-30 21:33:02] Rejected 038c2742 ICA 2  pool 0 Diff 72/32 (Share is abov
e target)
 [2013-09-30 21:33:02] Network difficulty changed to 0 ( 1.22Mh/s)
 [2013-09-30 21:33:02] Stratum from pool 0 detected new block

also bfg reporting 2.2GH/s ufccoin says 52KH/s after almost 1 hr

is this your first time mining ever?

[mogrith]

No have used bfgminer to connect to btcguild btcminers with no problem.


command for bfgminer with password removed
bfgminer.exe -o stratum+tcp://ufccoin.com:4444 -u mogrith.mogrith_1 -p xxxxxxxx-Q9 -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100

[cannonfodder]

Add the --scrypt flag and remove the icarus flags.

You're not trying to mine on an asic are you?

[mogrith]

Add the --scrypt flag and remove the icarus flags.

You're not trying to mine on an asic are you?

yep that was the prob somehow thought this was a SHA256 not Scypt Coin. Silly me.

AMD7770 getting 16KH/s now

[scificoin]

KED - Klingon-Empire-Darsek (Darsek)
Check points added, 22622 block client hanging issue fixed, & splash screen fixed.
https://www.asuswebstorage.com/navigate/s/A00C8F057B6148D4A279C0E319F80D904

UFC - United Federation of Planets Credit System (FederationCredits)
Check points added, splash screen fixed.
https://www.asuswebstorage.com/navigate/s/7462AA2FA2894FE490C3611E275A146B4

GPL - Gold Pressed Latinum of the Ferengi (GoldPressedLatinum)
Check points added, splash screen fixed & 2% fee corrected. This is planned as a possible hard fork later.  
Link on hold while we investigate an issue.

Please delete your old clients,  and delete all the files (except wallet.dat) in the folder  C:\User\YourUserName\AppData\Roaming\NameOfClient  

This folder is hidden by default.  to show hidden files follow the flow guide below.
Start > Control Panel > Appearance and Personalization > Folder Options > View Tab > Show hidden files and folders

Do not delete wallet.dat

Is there something wrong with the wallet, that you want me to delete it? I need specific instructions, because I am not a wallet expert. Is there a sci-fi coin main website where you can make announcements like this, as it seems to get lost in the threads at the forums I think?

There will be a domain, but we are waiting for the exchange first.

Did you upgrade to the new GPL wallet yesterday?  If the answer is no, you don't need to do anything.   If you did upgrade to the new wallet / client all you need to do is the same process.  

Basically whenever you install a wallet on your windows PC it creates a folder to wherever you have extracted the files.   This is your wallet (not to be confused with your wallet.dat)    When you first click on the executable file (the one with the GPL icon) in this folder it will create a second hidden folder called GoldPressedLatinum.     It can be found   C:\User\YourUserName\AppData\Roaming\GoldPressedLatinum.  When you want to upgrade to a newer version you need to find this folder, and inside you need to delete all files (except wallet.dat) .   You also need to delete the other folder that contains the executable file (most people will have this folder on their desktop).    When you have deleted this folder and all the files (except wallet.dat) in the hidden (most people refer to it as the roaming folder),  you can then unpack the new client/wallet.  See the steps below;

1. delete the wallet folder (usually on the desktop & does NOT contain wallet.dat file)
2. navigate to C:\User\YourUserName\AppData\Roaming\GoldPressedLatinum.
3. inside this folder delete all except wallet.dat
4. unpack new client that you have downloaded to where ever you want (most people use their desktop)
5. run the new client by clicking the executable file that has the GPL icon.
6. thats it,  now go grab a beer and celebrate.

---------------

Just a note;  The wallet.dat is what contains your information regarding what coins you own, and the information on transactions.  It is very good practice to backup this file and keep it in a safe location, ideally password protected & offline (eg. on a memory card, USB, cd, dvd and kept safe)   if anyone ever gets your wallet.dat then they can steal your coins.   I personally backup my wallets on 3 separate media and keep them off line.  You can keep these wallets that may contain $$$ safe and then you could happily delete the wallet.dat on your PC and when you load your wallet again it will create a new wallet.dat that will be empty.  This reduces the risk of loss. This is good practice for anyone with a lot of coins.  


Advanced users - may want to store there wallet.dat in a different area of their PC. on windows this is done by opening the wallet using a batch file with the -datadir=d:\BitCoinData extension where (BitCoinData) is the name of the folder where you want to store the wallet data.


  

[meta.p02]

I'm GPU mining GPL (6.5kH/s) and would like to add my CPU on. I tried various miners (on page 11 and 12), and they failed with "Received empty message" or something. When I change the protocol to "stratum+tcp", it immediately exits with "try minerd --help for more information". Could someone help me?

[DimaziK]

I have 215.523864 GPL to sell

215.523864 for 2 BTC
107.761932 for 1 BTC
53.880966 for 0.5 BTC


PM me if interested.

[nullbitspectre1848]

I'm GPU mining GPL (6.5kH/s) and would like to add my CPU on. I tried various miners (on page 11 and 12), and they failed with "Received empty message" or something. When I change the protocol to "stratum+tcp", it immediately exits with "try minerd --help for more information". Could someone help me?

Yeah this is exactly the problem I am having which is why I asked for help with the setup syntax.  I can't get any of the miners I have to mine GPL (as per above).  I've an old scrypt-jane miner I can solo with, getting good hashrates but no blocks.  Nothing will even try to start with the pool.

Any assistance would be much appreciated.

[scificoin]

The Grand Nagus has announced that the GPL issue is resolved.

He also told me that the 2% vs 0.02% has been resolved and that the best way forward is to stay with the 0.02% tx fee.

Splash screen fixed and checkpoints added. fully tested. TX fee 0.02%
https://www.asuswebstorage.com/navigate/s/26B91778711B4DFC8B808C4FB8C9D0EC4

"Once you have their money, you never give it back"

[dreamwatcher]

I have added a modified version of YBCMiner to use with Gold Pressed Latinum to my github.

The compiled executable is included, but not guaranteed to work (Compiled on Ubuntu 12.4)

one should only need to use the -a -o -u -p  parameters in the command line. (The modified Miner already has the GPL parameters hard coded - just use the scrypt algo)

https://github.com/Hartland/ybcminer_gpl

I use the cgminer.conf file for my miners.

Example (With a couple HD7950):

Code:

{
"pools" : [

        {
                "url" : "stratum+tcp://gplcoin.com:8888",
                "user" : "<username>",
                "pass" : "<password>"
        }
]
,
"intensity" : "17",
"vectors" : "2",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "2",
"thread-concurrency" : "24768",
"shaders" : "0",
"gpu-engine" : "1000",
"gpu-fan" : "0-75",
"gpu-memclock" : "1250",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95",
"temp-overheat" : "85",
"temp-target" : "75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[nullbitspectre1848]

I don't see an exe anywhere in there :s Am I just blind?

[dreamwatcher]

I don't see an exe anywhere in there :s Am I just blind?

Linux executable (Linux does not use  the exe extension)

If somebody wishes to compile the git into Windows, that would be great.

I have had zero luck cross-compiling anything from Linux to Windows, and I do all my development in Linux. Nothing against Windows, I just find development in Linux easier.

[jonoiv]

I'm GPU mining GPL (6.5kH/s) and would like to add my CPU on. I tried various miners (on page 11 and 12), and they failed with "Received empty message" or something. When I change the protocol to "stratum+tcp", it immediately exits with "try minerd --help for more information". Could someone help me?

Yeah this is exactly the problem I am having which is why I asked for help with the setup syntax.  I can't get any of the miners I have to mine GPL (as per above).  I've an old scrypt-jane miner I can solo with, getting good hashrates but no blocks.  Nothing will even try to start with the pool.

Any assistance would be much appreciated.

Are you using windows?  If so read on... "How to pool mine GPL"

The information is here in the thread, but I know it's getting to be a big thread now so I have added the information for you here.

download scrypt-jane_gpu.zip
http://rghost.net/48162507

Write a batch file as per below.  Place it in the same folder as the ybcminer.exe

Code:

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ybcminer --Nfmin 4 --Nfmax 30 --StartT 1377557832

the first time you run the batch file above you will need to manually add the URL (stratum+tcp://gplcoin.com:8888) then the username (user.worker) and then your password.  Then it should then start hashing, & you will need to save a config file same as CGminer. While it's running and hashing away by pressing "s" then "w", then enter, enter.

[meta.p02]

Are you using windows?  If so read on... "How to pool mine GPL"

The information is here in the thread, but I know it's getting to be a big thread now so I have added the information for you here.

download scrypt-jane_gpu.zip
http://rghost.net/48162507

...

Indeed, that is what I have been using for the GPU. But what I cannot seem to get working is the CPU miner...

[Shad3dOne]

we are Hue...

[jonoiv]

Are you using windows?  If so read on... "How to pool mine GPL"

The information is here in the thread, but I know it's getting to be a big thread now so I have added the information for you here.

download scrypt-jane_gpu.zip
http://rghost.net/48162507

...

Indeed, that is what I have been using for the GPU. But what I cannot seem to get working is the CPU miner...

I was answering nullbitspectre1848 with that last response.  He seems to not be able to pool mine.  

With your question I have not idea if its possible.  You can GPU with the way suggested at the pool and just leave the client turned on with gen=1 in the configuration file and then you will be mining both.  GPU at the pool and CPU solo on the machine.

If it is possible to combine the GPU and CPU then good luck, but TBH ive never seen it done.  I think the best place to look would be one of the YAcoin threads.  

[meta.p02]

Thanks. I'll look into compiling cpuminer-scrypt-jane with custom start time.

[unfocus]

Btw, there is a little typo on GPL pool site address on first post. It's currently gplccoin.com instead of gplcoin.com.

[truckythin]

dream, scifi, my issue with wallet that does not show up 100 GPL still not resolve yet, i try on clean pc with latest but no luck, any suggestions?