Bitburner Fury - Hashrate Protection

[FlappySocks]

I ordered on the 15th too.  I e-mailed cryptx over a week ago, to cancel as im fed up with the lack of info.  These are unlikely to ROI anyway.

I have not heard anything.  Not sure what to do now. Doing a chargeback, and going after burnin for my 50%?

[1713303768]

1713303768

[1713303768]

1713303768

[1713303768]

1713303768

[Fyuri]

A reminder of what cryptx said:

Every order made before septembar 17th will be delivered in the first week of october.

Well, mine was directly after coupon processing on the 15th.

So that's a fail for on time for my order

+1. Same for me, order 15th sep. No boards received.

Same for me too, order 15th sep. No boards received, no tracking number from FEDEX... 

[eraziel]

Keep giving money to assholes, way to go

[FlappySocks]

I got, like others, a tracking number last week.

Why would you set up a tracking number at least a week in advance, other than to let your customer think progress is being made? (this is a common trick, and ends up being shipped under a different consignment number)

Was there a problem with production?  Are they "Testing" the boards a bit longer while the forms are down?

[fydel]

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Or boards did show out of nowhere?

Anyone?

I got an eMail on Friday from asic-hardware.com stating that the order was shipped. Fedex tracking was updated, too.

[mccampser]

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Or boards did show out of nowhere?

Anyone?

I got an eMail on Friday from asic-hardware.com stating that the order was shipped. Fedex tracking was updated, too.

which ordner# ?

[fydel]

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Or boards did show out of nowhere?

Anyone?

I got an eMail on Friday from asic-hardware.com stating that the order was shipped. Fedex tracking was updated, too.

which ordner# ?

I was order no. #107X. Ordered on 15. Sep 2013.

[FlappySocks]

Im #103x and not seen anything. 

[mameise]

I got mine today but no idea how to setup... there are also 3 leds on it that all blink when i start cgminer... did anyone set one up and could give a short tut for it? Would be nice can't find anything about it yet..

[fydel]

I got mine today but no idea how to setup... there are also 3 leds on it that all blink when i start cgminer... did anyone set one up and could give a short tut for it? Would be nice can't find anything about it yet..

I think you should use the latest cgminer 3.5.

On Windows you need to install the WinUSB driver with the help of zdiag.

On the raspberry I compiled cgminer with "--enable-icarus --enable-bitfury --enable-avalon". But I dont know if all the three are mandatory.

Add "--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230" as parameters.

[mtbitcoin]

I got, like others, a tracking number last week.

Why would you set up a tracking number at least a week in advance, other than to let your customer think progress is being made? (this is a common trick, and ends up being shipped under a different consignment number)

Was there a problem with production?  Are they "Testing" the boards a bit longer while the forms are down?

Looks like I am in the same boat as yours. Got the tracking number last week but still no delivery  

And sadly no communication or email replies

[kernel_panic]

I got, like others, a tracking number last week.

Why would you set up a tracking number at least a week in advance, other than to let your customer think progress is being made? (this is a common trick, and ends up being shipped under a different consignment number)

Was there a problem with production?  Are they "Testing" the boards a bit longer while the forms are down?

Looks like I am in the same boat as yours. Got the tracking number last week but still no delivery 

Me too.
There are two things that cryptx copied from avalon. Shit communication and shipping logistics.

Sending out FedEx notifications to all of the orders last week and now getting fuck all..... that's like spit in your face, really very insulting.
And let's not forget the excellent communication abilities... yeah maybe spamming them with requests on the shipping status is my new job now because I have nothing better to do.

Meanwhile here's a nice link you can study while waiting for your "miner" http://www.eccbelgium.be/

[Tursk]

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Yes.

Or boards did show out of nowhere?

Fedex almost fucked up, but after enough complaining persuaded them I need it TODAY and got the board on an evening delivery at work.

[coin@coin]

Guys who recieved their boards...before recieving your boards were there any status changes on your fedex trafikamang page?

Yes.

Or boards did show out of nowhere?

Fedex almost fucked up, but after enough complaining persuaded them I need it TODAY and got the board on an evening delivery at work.

Can you confirm the hashing speed of your board/s? Thanks in advance. 

[Tursk]

Getting a USB write Error ...

I don't know what version of firmware you're using, but try using this one:
https://www.dropbox.com/s/fvc970hel90qwgd/bitburner-fury-firmware_1.2.4.hex

For instructions on updating firmware, see:
http://www.burninmining.com/assembly-instructions-part-2/

How about instructions what is the correct procedure with pic32prog on Linux?

I have done that successfully!

But still I don't get any better results .... still usb_write error ...

I tried on the notebook and even there I'm not able to get with cgminer.3.5. a working connection ...

I did get cgminer working when I tried to run it as root and not as an ordinary user; adding plugdev group privilege did not help.
Maybe it's this Debian wheezy and it's ancient usb libraries.

I'm using cgminer from
https://github.com/someone42/cgminer

[Tursk]

Can you confirm the hashing speed of your board/s? Thanks in advance. 

Code:

--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 BTB 0: 48C 256  944mV | 44.60G/44.67Gh/s | A:40558 R:378 HW:3735 WU:624.1/m
--------------------------------------------------------------------------------

This is with the options recommended here
--avalon-options 115200:16:10:d:256 --bitburner-voltage 1230

I don't dare to overclock the board yet, as the package was missing these:
    Mounting bolts
    Cooling fan & mounting brackets (one for every 2nd board)

Package had only Bitburner Fury with heatsink and USB cable. Nothing else, no instructions nor fan or bolts.

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

Luckily I had one extra Arctic fan lying around, so the board works now. HW error count seems quite high though.

[Starcraftman]

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

[Tursk]

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

https://www.burninmining.com/news/

[mameise]

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

https://www.burninmining.com/news/

So its only needed when stacking more together as far as i see. so with one there is no need for that?

well actually it seems to run. i will wait some more minutes with the happy jump Thanks for help!

[Starcraftman]

CANBUS termination jumpers were also missing. Had to dig jumpers from elsewhere, found two from an old motherboard.

This is news to me, are there instructions for this? Is it necessary to make the board function?

https://www.burninmining.com/news/

Thanks.