Bitburner Fury - Hashrate Protection

[biddicoin]

If ordered just one board - is there no fan included???

[shade88]

Yup, Fan only for every 2nd board.

If ordered just one board - is there no fan included???

[cryptx]

Hashrate protection is one thing but not getting the boards is a real big loss - now they are mining with client paid hardware & not sending them out. I got tracking but they never shipped it - CryptX what is with this clients - will you send them some BTC each for loss of one week mining?

The tracking number were generated automaticaly when we gave the order list to fedex. It has nothing to do with the boards.

We are not mining with anybody's boards. We are receiving and sending out boards daily now;

[mccampser]

Hashrate protection is one thing but not getting the boards is a real big loss - now they are mining with client paid hardware & not sending them out. I got tracking but they never shipped it - CryptX what is with this clients - will you send them some BTC each for loss of one week mining?

The tracking number were generated automaticaly when we gave the order list to fedex. It has nothing to do with the boards.

We are not mining with anybody's boards. We are receiving and sending out boards daily now;

which ordernumber are you actually shipping and how many devices are going out per day?

[biddicoin]

Yup, Fan only for every 2nd board.

If ordered just one board - is there no fan included???

damn, how to cool it then? Or is cooling without fan enough??

[Min€r]

Hashrate protection is one thing but not getting the boards is a real big loss - now they are mining with client paid hardware & not sending them out. I got tracking but they never shipped it - CryptX what is with this clients - will you send them some BTC each for loss of one week mining?

The tracking number were generated automaticaly when we gave the order list to fedex. It has nothing to do with the boards.

We are not mining with anybody's boards. We are receiving and sending out boards daily now;

Ok, thanks for an answer! Had send a mail but got no answer...

[mameise]

Yup, Fan only for every 2nd board.

If ordered just one board - is there no fan included???

damn, how to cool it then? Or is cooling without fan enough??

I can say running without extra cooling doesn't work long... Got an error after some mins saying miner idled: overheat
I took an old fan from my old rig. You can connect it directly to the board and i put it above the cooling pad blowing onto it. My fan has not a big power but it seems enough. Temp is about 53c so should be ok.

[biddicoin]

Thank you for your answer mameise!

[jlsminingcorp]

Yup, Fan only for every 2nd board.

If ordered just one board - is there no fan included???

Wtf, I presumed that this was just a slightly dodgy translation and that a fan, mounting brackets and standoffs would be provided for the first of every two boards (as I believe was the case for the bitburnerXX). How can you charge 900 Euro for a highly overclocked board without including a 10 Euro fan and 1 Euro worth of mounting brackets and standoffs ? We've got a stack of 120 and 140mm fans lying around, but none of the 90mm?? fans or correctly sized mounting brackets to make this into the neat little solution that it should be.

Sorry guys, I'm trying to stay positive here, but this just seems to be unnecessary penny pinching.

[mutex]

If I order a board or two today, when will they be shipped?

[shapemaker]

Yup, Fan only for every 2nd board.

If ordered just one board - is there no fan included???

Wtf, I presumed that this was just a slightly dodgy translation and that a fan, mounting brackets and standoffs would be provided for the first of every two boards (as I believe was the case for the bitburnerXX). How can you charge 900 Euro for a highly overclocked board without including a 10 Euro fan and 1 Euro worth of mounting brackets and standoffs ? We've got a stack of 120 and 140mm fans lying around, but none of the 90mm?? fans or correctly sized mounting brackets to make this into the neat little solution that it should be.

Sorry guys, I'm trying to stay positive here, but this just seems to be unnecessary penny pinching.

1 word: greed.

[jlsminingcorp]

Yup, Fan only for every 2nd board.

If ordered just one board - is there no fan included???

Wtf, I presumed that this was just a slightly dodgy translation and that a fan, mounting brackets and standoffs would be provided for the first of every two boards (as I believe was the case for the bitburnerXX). How can you charge 900 Euro for a highly overclocked board without including a 10 Euro fan and 1 Euro worth of mounting brackets and standoffs ? We've got a stack of 120 and 140mm fans lying around, but none of the 90mm?? fans or correctly sized mounting brackets to make this into the neat little solution that it should be.

Sorry guys, I'm trying to stay positive here, but this just seems to be unnecessary penny pinching.

1 word: greed.

Sigh, it's only a bloody fan. I know I shouldn't be getting annoyed about it and that we'll be able to rig something suitable up, it's just the principle of it.

[Picmin]

Wtf, I presumed that this was just a slightly dodgy translation and that a fan, mounting brackets and standoffs would be provided for the first of every two boards (as I believe was the case for the bitburnerXX). How can you charge 900 Euro for a highly overclocked board without including a 10 Euro fan and 1 Euro worth of mounting brackets and standoffs ? We've got a stack of 120 and 140mm fans lying around, but none of the 90mm?? fans or correctly sized mounting brackets to make this into the neat little solution that it should be.

Sorry guys, I'm trying to stay positive here, but this just seems to be unnecessary penny pinching.

Agree ! And if i order another board (joking) ... i bet these parts will be missing again

It would have been more efficient to add hex mounting / standoffs with each board... (facepalm)

[someone42]

AFAICS there are changes in the way voltage selection is done in this new driver.

I think you now specify the true voltage with a new argument, i.e. for standard (not overvolted) operation:

Code:

--bitburner-fury-voltage 900

But I could be wrong.  Hopefully @someone42 or @burnin will confirm soon.  Until then I suggest caution.

roy

The --bitburner-fury-voltage option will only take effect if a board identifies as BBF (as opposed to BTB) in cgminer. The current firmware will always identify as BTB, although getting it to identify as BBF is as simple as changing the USB product string from "BitBurner" to "BitBurner Fury".

I'm going to hold off on changing the USB product string until pull #499 makes it into an official release. This is because changing the USB product string will stop the boards from being recognised by older cgminer versions.

Yes, this is a bit of a mess. But hopefully in a few weeks time, everyone will be using new firmware and new cgminer which will render all this "add 300 mV to the desired core voltage" business obsolete.

[ZBC3]

Cryptx

Thank you for getting the bitburner fury  to me so quickly! Got it yesterday morning and haven't any issues since I updated the firmware. How quickly can a 2nd board be sent if I ordered one today?

[eraziel]

I guess immediately since the interest isn't overwhelming 
good for you

[RoadStress]

Yup, Fan only for every 2nd board.

If ordered just one board - is there no fan included???

Wtf, I presumed that this was just a slightly dodgy translation and that a fan, mounting brackets and standoffs would be provided for the first of every two boards (as I believe was the case for the bitburnerXX). How can you charge 900 Euro for a highly overclocked board without including a 10 Euro fan and 1 Euro worth of mounting brackets and standoffs ? We've got a stack of 120 and 140mm fans lying around, but none of the 90mm?? fans or correctly sized mounting brackets to make this into the neat little solution that it should be.

Sorry guys, I'm trying to stay positive here, but this just seems to be unnecessary penny pinching.

Because this is the way cryptx is doing business. He learned from Yifu!

[Starcraftman]

I have no experience with programming, how do you compile this build of CGminer?

[Fyuri]

I tried to git clone https://github.com/someone42/cgminer.git

but can't execute

./autogen.sh –enable-avalon
make

whats wrong?

Any way to override the orginal git clone?

do you sure -enable-avalon?

try

./autogen.sh
./configure --enable-avalon

[scotjam]

What's going on boys ?

"Expected shipping date 1-10-2013" but still nothing shipped ?!?

exactly the same thing here (same date, time,....).

Same here also, ordered on 16th.

Mine shipped today; expected to arrive tomorrow.