Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 29, 2014, 10:19:24 PM |
|
I`m not sure waht happened - but I got error during loading - Error loading blkindex.dat even when I removed both *.dat from roaming folder...
please Advise Thank you.
The blkindex.dat is the used in old versions (pre V1.3) So if you are getting an error with blkindex.dat you should just take the time to move to v1.3 Follow this guide, if you need further help let me know. https://cryptocointalk.com/topic/3003-hbn-version-13/
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 29, 2014, 10:25:27 PM |
|
Regarding a web faucet. I don't have the time to walk anyone through one. If you do set one up just PM me and I will set you up with some initial coins.
I'd rather it not be email based, but I will leave that up to you. Ads are also fine, but shouldn't be intrusive or offensive.
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 29, 2014, 11:05:20 PM |
|
|
|
|
|
micax1
|
|
January 30, 2014, 01:46:57 AM |
|
I`m not sure waht happened - but I got error during loading - Error loading blkindex.dat even when I removed both *.dat from roaming folder...
please Advise Thank you.
The blkindex.dat is the used in old versions (pre V1.3) So if you are getting an error with blkindex.dat you should just take the time to move to v1.3 Follow this guide, if you need further help let me know. https://cryptocointalk.com/topic/3003-hbn-version-13/it`s new verison 1.3 and it was already working.... it just happened and not letting me start anymore (
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 30, 2014, 01:53:50 AM |
|
I`m not sure waht happened - but I got error during loading - Error loading blkindex.dat even when I removed both *.dat from roaming folder...
please Advise Thank you.
The blkindex.dat is the used in old versions (pre V1.3) So if you are getting an error with blkindex.dat you should just take the time to move to v1.3 Follow this guide, if you need further help let me know. https://cryptocointalk.com/topic/3003-hbn-version-13/it`s new verison 1.3 and it was already working.... it just happened and not letting me start anymore ( Ok, Which client are you using? Win? Mac? Maybe a few lines of the debug file would help too. You can't remove both .dat files. Only the blkindex.dat is not needed when using leveldb. The other is needed, as it is the blockchain. So now that you removed both you will also have to remove the 2 databases directories as well, and re-sync. Perhaps you suffered some corruption due to bad shutdown? hard to say? You can also download the bootstrap.dat file from here http://www.fileswap.com/dl/aiKedIFxST/ and un-rar it and place the file in your appdata dir. Then start up the client. It will rebuild the files form the bootstrap file.
|
|
|
|
micax1
|
|
January 30, 2014, 02:20:23 AM |
|
Ok, Which client are you using? Win? Mac? Maybe a few lines of the debug file would help too. You can't remove both .dat files. Only the blkindex.dat is not needed when using leveldb. The other is needed, as it is the blockchain. So now that you removed both you will also have to remove the 2 databases directories as well, and re-sync. Perhaps you suffered some corruption due to bad shutdown? hard to say? You can also download the bootstrap.dat file from here http://www.fileswap.com/dl/aiKedIFxST/ and un-rar it and place the file in your appdata dir. Then start up the client. It will rebuild the files form the bootstrap file. win client 01/30/14 02:03:30 HoboNickels version v1.3.0.0-g76880ab-hobo (Tue Jan 07 18:52:00 2014) 01/30/14 02:03:30 Using OpenSSL version OpenSSL 1.0.1e 11 Feb 2013 01/30/14 02:03:30 Default data directory C:\Users\M\AppData\Roaming\HoboNickels 01/30/14 02:03:30 Used data directory C:\Users\M\AppData\Roaming\HoboNickels 01/30/14 02:03:30 dbenv.open LogDir=C:\Users\M\AppData\Roaming\HoboNickels\database ErrorFile=C:\Users\M\AppData\Roaming\HoboNickels\db.log 01/30/14 02:03:30 Bound to [::]:7372 01/30/14 02:03:30 Bound to 0.0.0.0:7372 01/30/14 02:03:30 Loading block index... 01/30/14 02:03:30 Opening LevelDB in C:\Users\M\AppData\Roaming\HoboNickels\txleveldb 01/30/14 02:03:30 Opened LevelDB successfully 01/30/14 02:04:55 LoadBlockIndex(): hashBestChain=000000012252b562518c height=535347 trust=708517327013 date=01/26/14 20:28:03 01/30/14 02:04:55 LoadBlockIndex(): synchronized checkpoint 000000012252b562518c1f984d12f153e0c0d5138fc828aa4cbb31ecdec8dd4a 01/30/14 02:04:55 Verifying last 2500 blocks at level 1 01/30/14 02:04:55 ERROR: CBlock::ReadFromDisk() : OpenBlockFile failed 01/30/14 02:04:55 ERROR: LoadBlockIndex() : block.ReadFromDisk failed
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 30, 2014, 02:57:49 AM |
|
Ok, Which client are you using? Win? Mac? Maybe a few lines of the debug file would help too. You can't remove both .dat files. Only the blkindex.dat is not needed when using leveldb. The other is needed, as it is the blockchain. So now that you removed both you will also have to remove the 2 databases directories as well, and re-sync. Perhaps you suffered some corruption due to bad shutdown? hard to say? You can also download the bootstrap.dat file from here http://www.fileswap.com/dl/aiKedIFxST/ and un-rar it and place the file in your appdata dir. Then start up the client. It will rebuild the files form the bootstrap file. win client 01/30/14 02:03:30 HoboNickels version v1.3.0.0-g76880ab-hobo (Tue Jan 07 18:52:00 2014) 01/30/14 02:03:30 Using OpenSSL version OpenSSL 1.0.1e 11 Feb 2013 01/30/14 02:03:30 Default data directory C:\Users\M\AppData\Roaming\HoboNickels 01/30/14 02:03:30 Used data directory C:\Users\M\AppData\Roaming\HoboNickels 01/30/14 02:03:30 dbenv.open LogDir=C:\Users\M\AppData\Roaming\HoboNickels\database ErrorFile=C:\Users\M\AppData\Roaming\HoboNickels\db.log 01/30/14 02:03:30 Bound to [::]:7372 01/30/14 02:03:30 Bound to 0.0.0.0:7372 01/30/14 02:03:30 Loading block index... 01/30/14 02:03:30 Opening LevelDB in C:\Users\M\AppData\Roaming\HoboNickels\txleveldb 01/30/14 02:03:30 Opened LevelDB successfully 01/30/14 02:04:55 LoadBlockIndex(): hashBestChain=000000012252b562518c height=535347 trust=708517327013 date=01/26/14 20:28:03 01/30/14 02:04:55 LoadBlockIndex(): synchronized checkpoint 000000012252b562518c1f984d12f153e0c0d5138fc828aa4cbb31ecdec8dd4a 01/30/14 02:04:55 Verifying last 2500 blocks at level 1 01/30/14 02:04:55 ERROR: CBlock::ReadFromDisk() : OpenBlockFile failed 01/30/14 02:04:55 ERROR: LoadBlockIndex() : block.ReadFromDisk failed Anything in your db.log? Have you tired to re-sync, after deleting blk0001.dat, txleveldb and database?
|
|
|
|
z0rr0
|
|
January 30, 2014, 07:25:23 PM |
|
Hi Tranz. Didnt check this thread for a time, and now I see new version 1.3 released. Does it works with multiwallet form previous version?
Deleted all files except 2 wallet.dat files from previous version (1.2.2) and run the 1.3 version, after chain downloading the client is crushing(
Version 1.3 will work with multi-wallets. You mean to say the client is crashing? Do you have an error in the debug log? It could be a corrupt wallet. But hard to say with no other infomation. One thing to try is to isolate the wallets. So rename your wallets to something like nowallet.dat or nowallet-stake. And then start-up the client. If it doesn't crash, then you have some corruption with one of your wallets. Let me know if you need further help. Hi Tranz. Making nowallet didnt work. Win7 shows miscrosoft visual c++ runtime library error. Debug log shows multiple errors of such a kind: ERROR: CheckProofOfStake() : INFO: read txPrev failed WARNING: ProcessBlock(): check proof-of-stake failed for block ... (different blocks) connection timeout May be I should delete an old .conf file with different addnodes, which may be already dont work...I dont know I have Win7 64, and using windows client 1.3 (P.S. does older 1.2.2 version works now or not?)
|
|
|
|
micax1
|
|
January 30, 2014, 08:56:36 PM |
|
Anything in your db.log?
Have you tired to re-sync, after deleting blk0001.dat, txleveldb and database?
after deleting blk0001.dat and blkindex.dat I got same error - so it could not be resynced if I delete txleveldb - then anothrer error during boot: error loading "stake" wallet.... error 22
|
|
|
|
micax1
|
|
January 30, 2014, 10:11:01 PM |
|
the worst part.... it`s starting ok with wallet.dat but not starting with wallet-stake.dat
I had 7300 there! I need help!
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 30, 2014, 10:54:47 PM |
|
the worst part.... it`s starting ok with wallet.dat but not starting with wallet-stake.dat
I had 7300 there! I need help!
Ok few things to try #1 back up both wallets to another directory. #2 startup client with just the wallet.dat ( you can use switch -usewallet="" ) #3 after you are sync'd up with chain. Try to quickly load the wallet-stake.dat and then send those coins to another wallet. #4 if that fails and the client crashes. Rename wallet.dat to wallet-olddef.dat Rename wallet-stake.dat wallet.dat then start client with -salvagewallet -usewallet="" Maybe a stupid question but you do you have a backup of your wallet-stake.dat? Let me know.
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 30, 2014, 10:58:33 PM |
|
Hi Tranz. Didnt check this thread for a time, and now I see new version 1.3 released. Does it works with multiwallet form previous version?
Deleted all files except 2 wallet.dat files from previous version (1.2.2) and run the 1.3 version, after chain downloading the client is crushing(
Version 1.3 will work with multi-wallets. You mean to say the client is crashing? Do you have an error in the debug log? It could be a corrupt wallet. But hard to say with no other infomation. One thing to try is to isolate the wallets. So rename your wallets to something like nowallet.dat or nowallet-stake. And then start-up the client. If it doesn't crash, then you have some corruption with one of your wallets. Let me know if you need further help. Hi Tranz. Making nowallet didnt work. Win7 shows miscrosoft visual c++ runtime library error. Debug log shows multiple errors of such a kind: ERROR: CheckProofOfStake() : INFO: read txPrev failed WARNING: ProcessBlock(): check proof-of-stake failed for block ... (different blocks) connection timeout May be I should delete an old .conf file with different addnodes, which may be already dont work...I dont know I have Win7 64, and using windows client 1.3 (P.S. does older 1.2.2 version works now or not?) You can go back to the old client yes. You will need to remove block chain files and re-sync. Although I am not sure you should have too. You can move all your files into a new bkup directory and try to go fresh and see what happens. If you get up to speed you can reload the old wallets from the bkup directory and see if they cause a crash.
|
|
|
|
micax1
|
|
January 31, 2014, 12:40:58 AM |
|
Ok few things to try
#1 back up both wallets to another directory. #2 startup client with just the wallet.dat ( you can use switch -usewallet="" ) #3 after you are sync'd up with chain. Try to quickly load the wallet-stake.dat and then send those coins to another wallet. #4 if that fails and the client crashes. Rename wallet.dat to wallet-olddef.dat Rename wallet-stake.dat wallet.dat then start client with -salvagewallet -usewallet=""
Maybe a stupid question but you do you have a backup of your wallet-stake.dat?
Let me know.
#1 back up both wallets to another directory. #2 startup client with just the wallet.dat ( you can use switch -usewallet="" ) - done waiting for re-sync now... Maybe a stupid question but you do you have a backup of your wallet-stake.dat? - unfortunately - no ( will follow up with later results... thank you! I think it happend after electricity outage (
|
|
|
|
ryanb
Legendary
Offline
Activity: 1148
Merit: 1000
|
|
January 31, 2014, 01:45:47 AM |
|
how do you send payment from new coins rather than aging coin?
|
|
|
|
tokyoghetto
Legendary
Offline
Activity: 1232
Merit: 1000
|
|
January 31, 2014, 01:51:46 AM |
|
how do you send payment from new coins rather than aging coin?
using advance coin control (ACC). Settings -> Options -> Display. Check "display coin control"
|
|
|
|
Tranz (OP)
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
|
January 31, 2014, 02:03:41 AM |
|
Ok few things to try
#1 back up both wallets to another directory. #2 startup client with just the wallet.dat ( you can use switch -usewallet="" ) #3 after you are sync'd up with chain. Try to quickly load the wallet-stake.dat and then send those coins to another wallet. #4 if that fails and the client crashes. Rename wallet.dat to wallet-olddef.dat Rename wallet-stake.dat wallet.dat then start client with -salvagewallet -usewallet=""
Maybe a stupid question but you do you have a backup of your wallet-stake.dat?
Let me know.
#1 back up both wallets to another directory. #2 startup client with just the wallet.dat ( you can use switch -usewallet="" ) - done waiting for re-sync now... Maybe a stupid question but you do you have a backup of your wallet-stake.dat? - unfortunately - no ( will follow up with later results... thank you! I think it happend after electricity outage ( Yes hard shutdowns can cause corruption. It is a shame that the wallets are so fragile. I do plan to implement a rpc command/improvement that will auto backup all wallets on a set schedule. If you still have issues, there are tools such as prywallet that can help get your private keys out, so you can at least get access to your coins.
|
|
|
|
unick
|
|
January 31, 2014, 03:41:30 PM Last edit: January 31, 2014, 04:11:53 PM by unick |
|
Hey Tranz, got some weird behavior with the Mac client.
I left the Mac client opened to let it stake. It did but all blocks are orphaned?!? All without exception.. So I fire up my windows client... It stakes perfectly (and it looks like all those block that got orphaned on the Mac client)
It's the same physical machine, windows 7 in VirtualBox. Both v1.3 and the same wallet is used on both instance (actually a copy of the same wallet). Also, I noted that I normally have less peer connections on the Mac client than on the Windows client
Do you know about this, what could be the problem? Any advice ?
Anybody else having issues staking on Mac?
Thanks
|
|
|
|
z0rr0
|
|
January 31, 2014, 04:35:52 PM Last edit: January 31, 2014, 08:28:41 PM by z0rr0 |
|
Hi Tranz. Didnt check this thread for a time, and now I see new version 1.3 released. Does it works with multiwallet form previous version?
Deleted all files except 2 wallet.dat files from previous version (1.2.2) and run the 1.3 version, after chain downloading the client is crushing(
Version 1.3 will work with multi-wallets. You mean to say the client is crashing? Do you have an error in the debug log? It could be a corrupt wallet. But hard to say with no other infomation. One thing to try is to isolate the wallets. So rename your wallets to something like nowallet.dat or nowallet-stake. And then start-up the client. If it doesn't crash, then you have some corruption with one of your wallets. Let me know if you need further help. Hi Tranz. Making nowallet didnt work. Win7 shows miscrosoft visual c++ runtime library error. Debug log shows multiple errors of such a kind: ERROR: CheckProofOfStake() : INFO: read txPrev failed WARNING: ProcessBlock(): check proof-of-stake failed for block ... (different blocks) connection timeout May be I should delete an old .conf file with different addnodes, which may be already dont work...I dont know I have Win7 64, and using windows client 1.3 (P.S. does older 1.2.2 version works now or not?) You can go back to the old client yes. You will need to remove block chain files and re-sync. Although I am not sure you should have too. You can move all your files into a new bkup directory and try to go fresh and see what happens. If you get up to speed you can reload the old wallets from the bkup directory and see if they cause a crash. Ive made a clean install, by deleting all files except the wallet.dat and run the HoboNickels-qt.exe from 1.3.0.0 version, and the client still crush approx after downloading the blockchain. Going back to 1.2.2 Update: after removing back to 1.2.2, during blockchain downloading (after clean install), got this error: "Critical error loading wallet "POS" from wallet-POS.dat:CDB() : can't open database file wallet-POS.dat, error 22" Wallet file was taken from backup, during 1.3 installation I was experimented with "nowallet" thing, could this be the reason? What should I do? I've had 2 wallets on my multiwallet 1.2.2 system when it was working (wallet.dat and wallet-POS.dat). If i'll take 2nd .dat file (wallet-POS.dat) to another machine and will try to sync 1.2.2 system there, would it work without 1st .dat (wallet.dat)? I'll try and report.
|
|
|
|
Ardolafat
|
|
January 31, 2014, 05:16:28 PM |
|
I think we need an extremist hobo with more ROI
|
|
|
|
micax1
|
|
January 31, 2014, 09:13:51 PM |
|
#3 after you are sync'd up with chain. Try to quickly load the wallet-stake.dat and then send those coins to another wallet. #4 if that fails and the client crashes. Rename wallet.dat to wallet-olddef.dat Rename wallet-stake.dat wallet.dat then start client with -salvagewallet -usewallet=""
Maybe a stupid question but you do you have a backup of your wallet-stake.dat?
Let me know.
loading wallet from a freshly synced client shows error 22 - cant open db file -salvagewallet -usewallet="" - is it exactly as command line should look like? - I got error during loading: Runaway exception fatal error error opening DBenvironment IO error C: path/txtleveldb/MANIFEST-004260:this handle is invalid
|
|
|
|
|