BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 08, 2018, 07:33:14 PM |
|
Have couple of FGPA Ztex 1.15y quad boards. Any idea what to mine?
here is the miner for Ztex 1.15y https://blakecoin.org/cgminer-3.1.1-blake-fpga-ztex.7zexamples are set in cgminer.conf and .bat so just edit your details
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
loneSilentWolf
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 08, 2018, 07:56:22 PM |
|
cgminer 3.1.1 blake256 doesn't start mining with windows 10 and amd r9 390 this is the ouput of verbose [2018-01-08 16:09:26] Started cgminer 3.1.1 [2018-01-08 16:09:26] GPU 0 AMD Radeon (TM) R9 390 Series hardware monitoring enabled [2018-01-08 16:09:26] Failed to ADL_Overdrive5_ODPerformanceLevels_Get [2018-01-08 16:09:26] Probing for an alive pool [2018-01-08 16:09:26] Testing pool stratum+tcp://eu3.blakecoin.com:3334 [2018-01-08 16:09:26] Testing pool stratum+tcp://eu3.blakecoin.com:3334 [2018-01-08 16:09:27] Stratum authorisation success for pool 1 [2018-01-08 16:09:27] Switching to pool 1 stratum+tcp://eu3.blakecoin.com:3334 - first alive pool [2018-01-08 16:09:27] Pool 1 stratum+tcp://eu3.blakecoin.com:3334 alive [2018-01-08 16:09:27] Init GPU thread 0 GPU 0 virtual GPU 0 [2018-01-08 16:09:27] CL Platform vendor: Advanced Micro Devices, Inc. [2018-01-08 16:09:27] CL Platform name: AMD Accelerated Parallel Processing [2018-01-08 16:09:27] CL Platform version: OpenCL 2.1 AMD-APP (2527.7) [2018-01-08 16:09:27] List of devices: [2018-01-08 16:09:27] 0 Hawaii [2018-01-08 16:09:27] Selected 0: Hawaii [2018-01-08 16:09:30] Stratum authorisation success for pool 0 [2018-01-08 16:09:30] Pool 0 stratum+tcp://eu3.blakecoin.com:3334 alive [2018-01-08 16:09:30] Switching to pool 0 stratum+tcp://eu3.blakecoin.com:3334
using the following configuration file https://pastebin.com/nTh1kF29 Using this command to start the miner cgminer.exe --blake256 --verbose -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password . Now if i start the miner without any config file only using the command the output given above doesn't even appear. On trying to run without any command line paramrtrrs and config file its the same output, as well as in case for running without any command line parameters but with a config file. I am using the latest amd 17.12.2 drivers even tried an older driver but it doesn't fix the issue. Any help will be appreciated miner used http://www.blakecoin.org/cgminer-alt-pool-la1.7z
|
|
|
|
BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 08, 2018, 08:52:54 PM |
|
cgminer 3.1.1 blake256 doesn't start mining with windows 10 and amd r9 390 this is the ouput of verbose [2018-01-08 16:09:26] Started cgminer 3.1.1 [2018-01-08 16:09:26] GPU 0 AMD Radeon (TM) R9 390 Series hardware monitoring enabled [2018-01-08 16:09:26] Failed to ADL_Overdrive5_ODPerformanceLevels_Get [2018-01-08 16:09:26] Probing for an alive pool [2018-01-08 16:09:26] Testing pool stratum+tcp://eu3.blakecoin.com:3334 [2018-01-08 16:09:26] Testing pool stratum+tcp://eu3.blakecoin.com:3334 [2018-01-08 16:09:27] Stratum authorisation success for pool 1 [2018-01-08 16:09:27] Switching to pool 1 stratum+tcp://eu3.blakecoin.com:3334 - first alive pool [2018-01-08 16:09:27] Pool 1 stratum+tcp://eu3.blakecoin.com:3334 alive [2018-01-08 16:09:27] Init GPU thread 0 GPU 0 virtual GPU 0 [2018-01-08 16:09:27] CL Platform vendor: Advanced Micro Devices, Inc. [2018-01-08 16:09:27] CL Platform name: AMD Accelerated Parallel Processing [2018-01-08 16:09:27] CL Platform version: OpenCL 2.1 AMD-APP (2527.7) [2018-01-08 16:09:27] List of devices: [2018-01-08 16:09:27] 0 Hawaii [2018-01-08 16:09:27] Selected 0: Hawaii [2018-01-08 16:09:30] Stratum authorisation success for pool 0 [2018-01-08 16:09:30] Pool 0 stratum+tcp://eu3.blakecoin.com:3334 alive [2018-01-08 16:09:30] Switching to pool 0 stratum+tcp://eu3.blakecoin.com:3334
using the following configuration file https://pastebin.com/nTh1kF29 Using this command to start the miner cgminer.exe --blake256 --verbose -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password . Now if i start the miner without any config file only using the command the output given above doesn't even appear. On trying to run without any command line paramrtrrs and config file its the same output, as well as in case for running without any command line parameters but with a config file. I am using the latest amd 17.12.2 drivers even tried an older driver but it doesn't fix the issue. Any help will be appreciated miner used http://www.blakecoin.org/cgminer-alt-pool-la1.7zdont use latest driver is my advice as amd have changed all sorts would need to recompile with later sdk older driver should work fine and newer driver very rarely improve hashrate try 16.9.2 which should work fine on r9 390 http://www.guru3d.com/files-details/amd-radeon-software-crimson-16-9-2-driver-download.htmlany issues removing or changing driver use DDU http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
Neshdan
Jr. Member
Offline
Activity: 67
Merit: 3
|
|
January 08, 2018, 10:42:44 PM |
|
Have couple of FGPA Ztex 1.15y quad boards. Any idea what to mine?
If you use Windows as mining platform the cgminer Bluedragon mentioned should be fine. I used the same for testing until i changed onto a Raspberry as mining controller. This was my Mine.Bat content: cgminer --disable-gpu --url stratum+tcp://eu1.blakecoin.com:3334 --userpass youraccount.yourworker:yourpassword
If you like to use a Raspberry Pi too, i can share a SD-Card image if you like to (just need to write a little text for it, so you wouldnt mine on my account)
|
|
|
|
loneSilentWolf
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2018, 03:48:15 AM |
|
cgminer 3.1.1 blake256 doesn't start mining with windows 10 and amd r9 390 this is the ouput of verbose [2018-01-08 16:09:26] Started cgminer 3.1.1 [2018-01-08 16:09:26] GPU 0 AMD Radeon (TM) R9 390 Series hardware monitoring enabled [2018-01-08 16:09:26] Failed to ADL_Overdrive5_ODPerformanceLevels_Get [2018-01-08 16:09:26] Probing for an alive pool [2018-01-08 16:09:26] Testing pool stratum+tcp://eu3.blakecoin.com:3334 [2018-01-08 16:09:26] Testing pool stratum+tcp://eu3.blakecoin.com:3334 [2018-01-08 16:09:27] Stratum authorisation success for pool 1 [2018-01-08 16:09:27] Switching to pool 1 stratum+tcp://eu3.blakecoin.com:3334 - first alive pool [2018-01-08 16:09:27] Pool 1 stratum+tcp://eu3.blakecoin.com:3334 alive [2018-01-08 16:09:27] Init GPU thread 0 GPU 0 virtual GPU 0 [2018-01-08 16:09:27] CL Platform vendor: Advanced Micro Devices, Inc. [2018-01-08 16:09:27] CL Platform name: AMD Accelerated Parallel Processing [2018-01-08 16:09:27] CL Platform version: OpenCL 2.1 AMD-APP (2527.7) [2018-01-08 16:09:27] List of devices: [2018-01-08 16:09:27] 0 Hawaii [2018-01-08 16:09:27] Selected 0: Hawaii [2018-01-08 16:09:30] Stratum authorisation success for pool 0 [2018-01-08 16:09:30] Pool 0 stratum+tcp://eu3.blakecoin.com:3334 alive [2018-01-08 16:09:30] Switching to pool 0 stratum+tcp://eu3.blakecoin.com:3334
using the following configuration file https://pastebin.com/nTh1kF29 Using this command to start the miner cgminer.exe --blake256 --verbose -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password . Now if i start the miner without any config file only using the command the output given above doesn't even appear. On trying to run without any command line paramrtrrs and config file its the same output, as well as in case for running without any command line parameters but with a config file. I am using the latest amd 17.12.2 drivers even tried an older driver but it doesn't fix the issue. Any help will be appreciated miner used http://www.blakecoin.org/cgminer-alt-pool-la1.7zdont use latest driver is my advice as amd have changed all sorts would need to recompile with later sdk older driver should work fine and newer driver very rarely improve hashrate try 16.9.2 which should work fine on r9 390 http://www.guru3d.com/files-details/amd-radeon-software-crimson-16-9-2-driver-download.htmlany issues removing or changing driver use DDU http://www.guru3d.com/files-details/display-driver-uninstaller-download.htmlI tried with 16.9.2 aswell ut it's the same result it crashes after that. could it be a problem because of amd sdk installed on my pc to compile some other miner? could you help me compile it with latest sdk?
|
|
|
|
BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 09, 2018, 04:50:34 AM |
|
I tried with 16.9.2 aswell ut it's the same result it crashes after that.
could it be a problem because of amd sdk installed on my pc to compile some other miner?
could you help me compile it with latest sdk?
Did you use DDU to remove drivers? I have a 290 here running win 10 and driver 16.9.2 and its working not sure there is any difference between the 290 - 390 apart from faster ram yeah maybe I dont have it setup for compiling the miner atm sorry
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
loneSilentWolf
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2018, 04:53:08 AM |
|
I tried with 16.9.2 aswell ut it's the same result it crashes after that.
could it be a problem because of amd sdk installed on my pc to compile some other miner?
could you help me compile it with latest sdk?
Did you use DDU to remove drivers? I have a 290 here and driver 16.9.2 and its working not sure there is any difference between the 290 - 390 apart from faster ram yeah maybe I dont have it setup for compiling the miner atm sorry Yes I had used DDU. But it failed even then. Trying on a fresh install windows on usb with 16.9.2 if it works then it means there's something conflicting in windows if it doesn't idk what. The thing is someone I know had it running on latest driver with 580, and on another PC with some old driver with 390 But it doesn't run on mine
|
|
|
|
BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 09, 2018, 05:14:00 AM |
|
I tried with 16.9.2 aswell ut it's the same result it crashes after that.
could it be a problem because of amd sdk installed on my pc to compile some other miner?
could you help me compile it with latest sdk?
Did you use DDU to remove drivers? I have a 290 here and driver 16.9.2 and its working not sure there is any difference between the 290 - 390 apart from faster ram yeah maybe I dont have it setup for compiling the miner atm sorry Yes I had used DDU. But it failed even then. Trying on a fresh install windows on usb with 16.9.2 if it works then it means there's something conflicting in windows if it doesn't idk what. The thing is someone I know had it running on latest driver with 580, and on another PC with some old driver with 390 But it doesn't run on mine yeah that is weird not sure what else you could try it should be working can you try these and see if any give different result on 16.9.2 cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password and cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password -T oh and if your not using cgminer.conf rename it something like cgminer.conf.backup
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
loneSilentWolf
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2018, 05:28:57 AM |
|
I tried with 16.9.2 aswell ut it's the same result it crashes after that.
could it be a problem because of amd sdk installed on my pc to compile some other miner?
could you help me compile it with latest sdk?
Did you use DDU to remove drivers? I have a 290 here and driver 16.9.2 and its working not sure there is any difference between the 290 - 390 apart from faster ram yeah maybe I dont have it setup for compiling the miner atm sorry Yes I had used DDU. But it failed even then. Trying on a fresh install windows on usb with 16.9.2 if it works then it means there's something conflicting in windows if it doesn't idk what. The thing is someone I know had it running on latest driver with 580, and on another PC with some old driver with 390 But it doesn't run on mine yeah that is weird not sure what else you could try it should be working can you try these and see if any give different result on 16.9.2 cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password and cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password -T oh and if your not using cgminer.conf rename it something like cgminer.conf.backup Will do. Taking a bit of time to set up usb windows. Once I am done with it I'll boot into normal windows and do this
|
|
|
|
loneSilentWolf
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2018, 06:04:42 AM |
|
I tried with 16.9.2 aswell ut it's the same result it crashes after that.
could it be a problem because of amd sdk installed on my pc to compile some other miner?
could you help me compile it with latest sdk?
Did you use DDU to remove drivers? I have a 290 here and driver 16.9.2 and its working not sure there is any difference between the 290 - 390 apart from faster ram yeah maybe I dont have it setup for compiling the miner atm sorry Yes I had used DDU. But it failed even then. Trying on a fresh install windows on usb with 16.9.2 if it works then it means there's something conflicting in windows if it doesn't idk what. The thing is someone I know had it running on latest driver with 580, and on another PC with some old driver with 390 But it doesn't run on mine yeah that is weird not sure what else you could try it should be working can you try these and see if any give different result on 16.9.2 cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password and cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password -T oh and if your not using cgminer.conf rename it something like cgminer.conf.backup It crashes the first one just shows [2018-01-09 17:02:47] Started cgminer 3.1.1 and closes The other command I ran as is and with pasting the results. Both closed down as well. G:\cgminer-alt-pool-la1>cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password -T [2018-01-09 17:02:47] Started cgminer 3.1.1 [2018-01-09 17:02:47] Probing for an alive pool
G:\cgminer-alt-pool-la1>cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password -T --verbose [2018-01-09 17:02:55] Started cgminer 3.1.1 [2018-01-09 17:02:55] CL Platform 0 vendor: Advanced Micro Devices, Inc. [2018-01-09 17:02:55] CL Platform 0 name: AMD Accelerated Parallel Processing [2018-01-09 17:02:55] CL Platform 0 version: OpenCL 2.0 AMD-APP (2117.13) [2018-01-09 17:02:55] Platform 0 devices: 1 [2018-01-09 17:02:55] 0 Hawaii [2018-01-09 17:02:55] GPU 0 AMD Radeon (TM) R9 390 Series hardware monitoring enabled [2018-01-09 17:02:55] Probing for an alive pool [2018-01-09 17:02:55] Testing pool stratum+tcp://eu3.blakecoin.com:3334 [2018-01-09 17:02:56] Stratum authorisation success for pool 0 [2018-01-09 17:02:56] Pool 0 stratum+tcp://eu3.blakecoin.com:3334 alive [2018-01-09 17:02:56] Init GPU thread 0 GPU 0 virtual GPU 0 [2018-01-09 17:02:56] CL Platform vendor: Advanced Micro Devices, Inc. [2018-01-09 17:02:56] CL Platform name: AMD Accelerated Parallel Processing [2018-01-09 17:02:56] CL Platform version: OpenCL 2.0 AMD-APP (2117.13) [2018-01-09 17:02:56] List of devices: [2018-01-09 17:02:56] 0 Hawaii [2018-01-09 17:02:56] Selected 0: Hawaii
G:\cgminer-alt-pool-la1>
|
|
|
|
loneSilentWolf
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2018, 06:48:39 AM |
|
I tried with 16.9.2 aswell ut it's the same result it crashes after that.
could it be a problem because of amd sdk installed on my pc to compile some other miner?
could you help me compile it with latest sdk?
Did you use DDU to remove drivers? I have a 290 here and driver 16.9.2 and its working not sure there is any difference between the 290 - 390 apart from faster ram yeah maybe I dont have it setup for compiling the miner atm sorry Yes I had used DDU. But it failed even then. Trying on a fresh install windows on usb with 16.9.2 if it works then it means there's something conflicting in windows if it doesn't idk what. The thing is someone I know had it running on latest driver with 580, and on another PC with some old driver with 390 But it doesn't run on mine yeah that is weird not sure what else you could try it should be working can you try these and see if any give different result on 16.9.2 cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password and cgminer.exe --blake256 -o stratum+tcp://eu3.blakecoin.com:3334 -u loneSilentWolf.r9390 -p password -T oh and if your not using cgminer.conf rename it something like cgminer.conf.backup Okay so it worked on my usb windows version. Must be some conflicting software I guess then. Probably the sdkbi installed to compile some other miner
|
|
|
|
BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 09, 2018, 11:07:07 AM |
|
Okay so it worked on my usb windows version. Must be some conflicting software I guess then. Probably the sdkbi installed to compile some other miner
yeah must be a conflict but glad to hear you got it working in the end
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
loneSilentWolf
Newbie
Offline
Activity: 21
Merit: 0
|
|
January 09, 2018, 11:11:21 AM |
|
Okay so it worked on my usb windows version. Must be some conflicting software I guess then. Probably the sdkbi installed to compile some other miner
yeah must be a conflict but glad to hear you got it working in the end It's a band-aid solution to say the least it still doesn't work on my pc. I Even uninstalled many programs to see if that work, it didn't. Only thing left is that it's either avast or some windows update got corrupt on me. Since my portable windows has no update on it nor any antivirus ATM. I'll try installing avast on it and even upgrading the drivers and see how it goes.
|
|
|
|
Neshdan
Jr. Member
Offline
Activity: 67
Merit: 3
|
|
January 10, 2018, 08:42:23 AM |
|
So now the beginning of a long long torturous way Trying to compile blakecoind on Ubuntu 17.04 32 Bit i get the following error: /usr/bin/ld: cannot find -lboost_system-mgw49-mt-s-1_55 /usr/bin/ld: cannot find -lboost_filesystem-mgw49-mt-s-1_55 /usr/bin/ld: cannot find -lboost_program_options-mgw49-mt-s-1_55 /usr/bin/ld: cannot find -lboost_thread-mgw49-mt-s-1_55 collect2: error: ld returned 1 exit status Makefile:315: recipe for target 'blakecoin-qt' failed make: *** [blakecoin-qt] Error 1 a few packages that were mentioned as dependancies could not be installed in the original way as mentioned on github. I installed them as followed: sudo apt-get install git-core build-essential libssl-dev libboost-all-dev libdb5.3-dev libdb5.3++-dev libgtk2.0-dev libminiupnpc-dev qt4-qmake mingw-w64 synaptic qt-sdk qt4-dev-tools libqt4-dev libqtcore4 libqtgui4 libdb++-dev The bold marked packages are the ones i had to change, to get them installed. Maybe these needed changes are the problem? Any other hints on the fail while doing make?
|
|
|
|
BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 10, 2018, 10:02:49 AM Last edit: January 10, 2018, 10:54:44 AM by BlueDragon747 |
|
So now the beginning of a long long torturous way Trying to compile blakecoind on Ubuntu 17.04 32 Bit i get the following error: /usr/bin/ld: cannot find -lboost_system-mgw49-mt-s-1_55 /usr/bin/ld: cannot find -lboost_filesystem-mgw49-mt-s-1_55 /usr/bin/ld: cannot find -lboost_program_options-mgw49-mt-s-1_55 /usr/bin/ld: cannot find -lboost_thread-mgw49-mt-s-1_55 collect2: error: ld returned 1 exit status Makefile:315: recipe for target 'blakecoin-qt' failed make: *** [blakecoin-qt] Error 1 a few packages that were mentioned as dependancies could not be installed in the original way as mentioned on github. I installed them as followed: sudo apt-get install git-core build-essential libssl-dev libboost-all-dev libdb5.3-dev libdb5.3++-dev libgtk2.0-dev libminiupnpc-dev qt4-qmake mingw-w64 synaptic qt-sdk qt4-dev-tools libqt4-dev libqtcore4 libqtgui4 libdb++-dev The bold marked packages are the ones i had to change, to get them installed. Maybe these needed changes are the problem? Any other hints on the fail while doing make? I found 16.04 great but 17.04 not so much need to make some changes and its just a PITA if you change the deps need to make changes to the makefile.unix to reflect which ones you do have *from the error they are all boost issues so check which one and edit makefile you can get issues with newer boost check this out https://github.com/bitcoin/bitcoin/pull/6114/filesor panopolis did some updates for newer distros here https://github.com/panopolis/Blakecoin
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
Neshdan
Jr. Member
Offline
Activity: 67
Merit: 3
|
|
January 10, 2018, 02:18:00 PM |
|
Thank you Bluedragon. It seemed i did it the wrong way (sorry, i have no experience with building, or its to long ago). Now i tried it the way described in src/build-unix.md - so did out of the src folder and it ran through (besides a ton of warnings) - it even seems blakecoind is syncronizing (folder is growing). The issues mentioned with boost... i made the change that was described there before running make. But at all... be aware of more questions and despair to come
|
|
|
|
BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 10, 2018, 04:17:05 PM |
|
Thank you Bluedragon. It seemed i did it the wrong way (sorry, i have no experience with building, or its to long ago). Now i tried it the way described in src/build-unix.md - so did out of the src folder and it ran through (besides a ton of warnings) - it even seems blakecoind is syncronizing (folder is growing). The issues mentioned with boost... i made the change that was described there before running make. But at all... be aware of more questions and despair to come no problem the most common commands I run to build for ubuntu 12.04-16.04 sudo git clone https://github.com/BlueDragon747/Blakecoin cd blakecoin/src
cd src/leveldb chmod +x Makefile chmod +x build_detect_platform sudo make libleveldb.a libmemenv.a cd ..
sudo make -f makefile.unix USE_UPNP=0
sudo strip blakecoind
if your on a home network behind nat/firewall best to set UPNP=1 but for public nodes with public ips I turn it off to avoid exploit crashing nodes
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
Neshdan
Jr. Member
Offline
Activity: 67
Merit: 3
|
|
January 13, 2018, 09:03:25 AM |
|
As eloipool returned as a dead pool, i tried to run blakecoind in solo config first - just to test if it works alone. After a few struggles with connecting my miners to the blakecoind on my virtual ubuntu machine, i got it to work and it even found a block this night (wanted to test the whole functionality). The block is still immature, but i think this will work too. I now have the following problem: i start blakecoind by ./blakecoind -datadir=/home/osboxes/Desktop/Blake/BlakeData -daemon and it says "Blakecoin server starting" Now i have a problem to stop that server. What i did: ./blakecoind -datadir=/home/osboxes/Desktop/Blake/BlakeData -rpcusername=myusername -rpcpassword=mypassword stop and it says "Blakecoin server stopping" So far so good. But if i want to restart the server i get "Error: Cannot obtain a lock on data directory /home/osboxes/Desktop/Blake/BlakeData. Blakecoin is probably already running." If first have to kill the process by sudo pkill -9 -f blakecoind to be able to restart the server. So now, the question is: Whats wrong. Did i miss something? I just want to clear things for myself before trying further with eloipool and maybe merged mine. But if i fail to use the simple solo version, how should i succeed in the more complicated.
|
|
|
|
BlueDragon747 (OP)
Legendary
Offline
Activity: 1509
Merit: 1030
Solutions Architect
|
|
January 13, 2018, 11:58:39 AM Last edit: January 13, 2018, 12:12:57 PM by BlueDragon747 |
|
As eloipool returned as a dead pool, i tried to run blakecoind in solo config first - just to test if it works alone. After a few struggles with connecting my miners to the blakecoind on my virtual ubuntu machine, i got it to work and it even found a block this night (wanted to test the whole functionality). The block is still immature, but i think this will work too. I now have the following problem: i start blakecoind by ./blakecoind -datadir=/home/osboxes/Desktop/Blake/BlakeData -daemon and it says "Blakecoin server starting" Now i have a problem to stop that server. What i did: ./blakecoind -datadir=/home/osboxes/Desktop/Blake/BlakeData -rpcusername=myusername -rpcpassword=mypassword stop and it says "Blakecoin server stopping" So far so good. But if i want to restart the server i get "Error: Cannot obtain a lock on data directory /home/osboxes/Desktop/Blake/BlakeData. Blakecoin is probably already running." If first have to kill the process by sudo pkill -9 -f blakecoind to be able to restart the server. So now, the question is: Whats wrong. Did i miss something? I just want to clear things for myself before trying further with eloipool and maybe merged mine. But if i fail to use the simple solo version, how should i succeed in the more complicated. no need to pass arg when stopping and if you want to make life simpler just set all your details in conf and avoid passing via command example blakecoin.conf would be like (note the rpc allow can also be like 192.168.1.* and the rpc port) listen=1 rpcallowip=127.0.0.1 rpcuser=myusername rpcpassword=mypassword rpcport=8772 logtimestamps=1 server=1 daemon=1 addnode=146.185.135.24 addnode=104.238.177.36 addnode=104.238.133.35 addnode=107.191.58.189 addnode=108.61.242.204 addnode=107.170.178.92
./blakecoind -datadir=/home/osboxes/Desktop/Blake/BlakeData Ignatius did a private merged pool setup guide here Here
|
Info: Github - Blakecoin.org - BCT Blakecoin thread - Twitter - BCS - BlakeZone Trade Blakecoin: Xeggex.com Merged Mining Pools: EU3 - NY2/AT1 - LA1Donation Addresses: BLC: Bd3jJftFbwxWSKNSNz35vkDd57kG6jHAjt PHO: BZXPMc8eF9YZcJStskkP2bVia38fv9VmuT BBTC: 2h8c4NbzXJXk6QQ89r7YYMGhe13gQUC2ajD ELT: e7cm6cAgpfhvk3Myh2Jkmi1nqaHtDHnxXb UMO: uQH9H17t7kz3eVQ3vKDzMsWCK4hn5nh2gC LIT: 8p8Z4h5fkZ8SCoyEtihKcjzZLA7gFjTdmL BTC: 1Q6kgcNqhKh8u67m6Gj73T2LMgGseETwR6
|
|
|
Neshdan
Jr. Member
Offline
Activity: 67
Merit: 3
|
|
January 13, 2018, 01:14:25 PM |
|
I tried to stop the server with ./blakecoind -datadir=/home/osboxes/Desktop/Blake/BlakeData stop but it didnt work first. When i tried to restart the server, it said it seem to be running (cannot obtain lock on data directory). I again had to kill the process. Then i tried sudo ./blakecoind -datadir=/home/osboxes/Desktop/Blake/BlakeData stop and got the following response on the first try: terminate called after throwing an instance of 'boost::exception_detail::clone_impl<boost::exception_detail::error_info_injector<boost::lock_error> >' what(): boost: mutex lock failed in pthread_mutex_lock: Invalid argument The server was stopped (obv. by the exception). After that i tried it again. The server stopped without any exception and could be restarted without any process kill. But sometimes i have to call the stop command two times until the server really stops (sometime the try to lock the data dir fails, when i only stopped the server once). If i just try it fails, because the datadir isnt the one blakecoind wants to set without params. BTW. i used the linked guide from Ignatius to install the eloipool. But as for now, i just want to make sure blakecoind is running well before trying to use mining it over eloipool (and then trying to get into merged mining, if i come that far).
|
|
|
|
|