Baikal Giant N - Cryptonight, Cryptonight-lite FPGA/ASIC miner

[bitdigfun]

when i update my baikal giant N with PiZero_GX10_180410_V1.2.img i have 3 red and 3 blue lights(1 on each card) and 3 red light on control board!
and on baikal interface > devices > when i click on identify > blue,green and red from the 1 card and the red light from the control board (= total 4 lights) flashes for 15 sec and goes off!?!? and it's the same when i click on 2 other identify (=3 cards in total!)
so in other words the device works! or does that not matter bec it doesn't mine?

the green light is when i start mining or is that when a block is detected?


also when update with PiZero_GN_180310_V1.0.img or all other image, i get no device detected?!

i'm confused since PiZero_GX10_180410_V1.2.img is for baikal giant x10 but i have a baikal giant N.


i have reupdated orange pi zero like dozen time and baikal support doesn't know either and they offer to buy new pi and control board without even knowing what the problem is?

anyone has the same issue?

 

[yrk1957]

when i update my baikal giant N with PiZero_GX10_180410_V1.2.img i have 3 red and 3 blue lights(1 on each card) and 3 red light on control board!
and on baikal interface > devices > when i click on identify > blue,green and red from the 1 card and the red light from the control board (= total 4 lights) flashes for 15 sec and goes off!?!? and it's the same when i click on 2 other identify (=3 cards in total!)
so in other words the device works! or does that not matter bec it doesn't mine?

the green light is when i start mining or is that when a block is detected?


also when update with PiZero_GN_180310_V1.0.img or all other image, i get no device detected?!

i'm confused since PiZero_GX10_180410_V1.2.img is for baikal giant x10 but i have a baikal giant N.


i have reupdated orange pi zero like dozen time and baikal support doesn't know either and they offer to buy new pi and control board without even knowing what the problem is?

anyone has the same issue?

 

I believe PiZero_GX10 is X10 Image, you can't use it on N.

[MagicSmoker]

...
i have reupdated orange pi zero like dozen time and baikal support doesn't know either and they offer to buy new pi and control board without even knowing what the problem is?
...

Makes sense to me - a Raspberry Pi Zero costs barely more than $20 in the US, so probably closer to $5 in China.  Just paying a tech support employee - even Chinese wages - costs more than that.

[bitdigfun]

...
i have reupdated orange pi zero like dozen time and baikal support doesn't know either and they offer to buy new pi and control board without even knowing what the problem is?
...

Makes sense to me - a Raspberry Pi Zero costs barely more than $20 in the US, so probably closer to $5 in China.  Just paying a tech support employee - even Chinese wages - costs more than that.

no the problem is that they couldn't even give an explanation what is wrong about the miner. the lights all light up so it's not broken.
also it could be that the cards are broken? they don't know! lol.
they don't sell the orange pi and the control board on their website but they offer to buy a new one after a couple emails and they can't figure out what wrong with it???!?
these chinese companies are into selling shit and not helping. that's the problem.

[yrk1957]

...
i have reupdated orange pi zero like dozen time and baikal support doesn't know either and they offer to buy new pi and control board without even knowing what the problem is?
...

Makes sense to me - a Raspberry Pi Zero costs barely more than $20 in the US, so probably closer to $5 in China.  Just paying a tech support employee - even Chinese wages - costs more than that.

no the problem is that they couldn't even give an explanation what is wrong about the miner. the lights all light up so it's not broken.
also it could be that the cards are broken? they don't know! lol.
they don't sell the orange pi and the control board on their website but they offer to buy a new one after a couple emails and they can't figure out what wrong with it???!?
these chinese companies are into selling shit and not helping. that's the problem.

Well it is what it is. No harm in throwing $20 at it I suppose?

Why were you flashing X10 image on N?

[ciciteng]

X3 and n240 should be below 800$ in 2 weeks.

Yeah in about 2 weeks you will see major discount on this ASIC door stoper.
The thing is, all the cryptonight algo will fork in matter of days from now. So we will expect a lot of SALE during these weeks.
Stay away from this ASIC.

[bitdigfun]

...
i have reupdated orange pi zero like dozen time and baikal support doesn't know either and they offer to buy new pi and control board without even knowing what the problem is?
...

Makes sense to me - a Raspberry Pi Zero costs barely more than $20 in the US, so probably closer to $5 in China.  Just paying a tech support employee - even Chinese wages - costs more than that.

no the problem is that they couldn't even give an explanation what is wrong about the miner. the lights all light up so it's not broken.
also it could be that the cards are broken? they don't know! lol.
they don't sell the orange pi and the control board on their website but they offer to buy a new one after a couple emails and they can't figure out what wrong with it???!?
these chinese companies are into selling shit and not helping. that's the problem.

Well it is what it is. No harm in throwing $20 at it I suppose?

Why were you flashing X10 image on N?

you sound like one of these one who isn't into helping aren't, you? or are you an affiliate with one of these sellers.
and i think you can't read neither.
also you never bought anything from china, didn't you?

[yrk1957]

...
i have reupdated orange pi zero like dozen time and baikal support doesn't know either and they offer to buy new pi and control board without even knowing what the problem is?
...

Makes sense to me - a Raspberry Pi Zero costs barely more than $20 in the US, so probably closer to $5 in China.  Just paying a tech support employee - even Chinese wages - costs more than that.

no the problem is that they couldn't even give an explanation what is wrong about the miner. the lights all light up so it's not broken.
also it could be that the cards are broken? they don't know! lol.
they don't sell the orange pi and the control board on their website but they offer to buy a new one after a couple emails and they can't figure out what wrong with it???!?
these chinese companies are into selling shit and not helping. that's the problem.

Well it is what it is. No harm in throwing $20 at it I suppose?

Why were you flashing X10 image on N?

you sound like one of these one who isn't into helping aren't, you? or are you an affiliate with one of these sellers.
and i think you can't read neither.
also you never bought anything from china, didn't you?

Not sure what makes you think that. I am only trying to help you.

And *you* seem to bought from China for the first time as you are expecting them to be helpful. Good luck!

[MagicSmoker]

you sound like one of these one who isn't into helping aren't, you? or are you an affiliate with one of these sellers.
and i think you can't read neither.
also you never bought anything from china, didn't you?

It's no news flash that shit made in China is mostly shit. It's also no news flash that the "warranty" provided by ASIC miner manufacturers isn't worth the paper it's printed on. If you are surprised that your POS ASIC stopped working after you attempted to flash a new bitstream onto it then you obviously haven't been paying attention and/or bought the ASIC without doing a lick of research. Ergo, you got exactly what you deserved, which is an un-lubed Dragon dildo up the poop-chute.

NB - the correct response to anyone who replies to your plea for help and which isn't totally roasting your sorry ass is, "thank you." Even if the reply didn't actually help. No one here HAS to reply to your queries and you aren't entitled to help, either.

So let's dial back on the self-entitlement and try again with a bit more humility, eh?

[multiplicandobitcoins]

If you are looking for a pool to mine with your Baikal I have been using Successfully the following:

Bytecoin BCN

URL: stratum+tcp://bcn.superpools.online:9999
Worker: your wallet address (optional +PaymentID for exchange)
Pawword: x

SumoKoin (SUMO)

URL: stratum+tcp://sumo.superpools.online:4999
Worker: your wallet address
Pawword: x

DigitalNote XDN

URL: stratum+tcp://xdn.superpools.online:9999
Worker: your wallet address
Pawword: x

DERO

URL: stratum+tcp://dero.superpools.online:19999
Worker: your wallet address
Pawword: x

Newton NCP

URL: stratum+tcp://ncp.superpools.online:9999
Worker: your wallet address
Pawword: x

B2b

URL: stratum+tcp://b2b.superpools.online:9999
Worker: your wallet address
Pawword: x

Karbo KRB

URL: stratum+tcp://krb.superpools.online:9999
Worker: your wallet address
Pawword: x

Monero Original

URL: stratum+tcp://xmo.superpools.online:9999
Worker: your wallet address
Pawword: x

[sergey1301]

A huge plus ASIC is the consumption of 60 watts. Mining with asika increases the difficulty and the coin has no profit.

[bitdigfun]

I already have a working version. Which will be made public in a short time. Bummer is, not possible to OC, and not possible to mine V7 at this moment. Firmware updates are needed.

Code:

sgminer 5.6.2-BK_cod3gen_MOD - Started: [2018-03-27 20:28:01] - [0 days 02:15:45]
--------------------------------------------------------------------------------
(5s):20.16K (avg):20.11Kh/s | A:392  R:0  HW:0  WU:3.088/m
ST: 1  SS: 27  NB: 88  LW: 8420  GF: 0  RF: 0
Connected to pool.supportxmr.com (stratum) diff 500K as user XXX
Block: 3516dd19...  Diff:0  Started: [22:42:41]  Best share: 556M
--------------------------------------------------------------------------------
 [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
BKLU 0: 34C 200MHz [ASICS #32] | 6.670K/6.672Kh/s | A:125 R:0 HW:0 WU:1.002/m
BKLU 1: 33C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:132 R:0 HW:0 WU:1.032/m
BKLU 2: 34C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:135 R:0 HW:0 WU:1.054/m

Will post another thread once everything is in place.

where can i download this? or isn't it finished yet?

[xxmetalmartyrxx]

I get lots of rejects (20-40%) on Nicehash, any fix?

[cod3gen]

I already have a working version. Which will be made public in a short time. Bummer is, not possible to OC, and not possible to mine V7 at this moment. Firmware updates are needed.

Code:

sgminer 5.6.2-BK_cod3gen_MOD - Started: [2018-03-27 20:28:01] - [0 days 02:15:45]
--------------------------------------------------------------------------------
(5s):20.16K (avg):20.11Kh/s | A:392  R:0  HW:0  WU:3.088/m
ST: 1  SS: 27  NB: 88  LW: 8420  GF: 0  RF: 0
Connected to pool.supportxmr.com (stratum) diff 500K as user XXX
Block: 3516dd19...  Diff:0  Started: [22:42:41]  Best share: 556M
--------------------------------------------------------------------------------
 [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
BKLU 0: 34C 200MHz [ASICS #32] | 6.670K/6.672Kh/s | A:125 R:0 HW:0 WU:1.002/m
BKLU 1: 33C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:132 R:0 HW:0 WU:1.032/m
BKLU 2: 34C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:135 R:0 HW:0 WU:1.054/m

Will post another thread once everything is in place.

where can i download this? or isn't it finished yet?

There is no rise in performance for cryptonight miners, however you can find it here: https://github.com/cod3gen/sgminer-baikal

[bitdigfun]

I already have a working version. Which will be made public in a short time. Bummer is, not possible to OC, and not possible to mine V7 at this moment. Firmware updates are needed.

Code:

sgminer 5.6.2-BK_cod3gen_MOD - Started: [2018-03-27 20:28:01] - [0 days 02:15:45]
--------------------------------------------------------------------------------
(5s):20.16K (avg):20.11Kh/s | A:392  R:0  HW:0  WU:3.088/m
ST: 1  SS: 27  NB: 88  LW: 8420  GF: 0  RF: 0
Connected to pool.supportxmr.com (stratum) diff 500K as user XXX
Block: 3516dd19...  Diff:0  Started: [22:42:41]  Best share: 556M
--------------------------------------------------------------------------------
 [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
BKLU 0: 34C 200MHz [ASICS #32] | 6.670K/6.672Kh/s | A:125 R:0 HW:0 WU:1.002/m
BKLU 1: 33C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:132 R:0 HW:0 WU:1.032/m
BKLU 2: 34C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:135 R:0 HW:0 WU:1.054/m

Will post another thread once everything is in place.

where can i download this? or isn't it finished yet?

There is no rise in performance for cryptonight miners, however you can find it here: https://github.com/cod3gen/sgminer-baikal

yea, i already got it but there's no exe or bat file.

what command do you put in?

[okyanus58]

new algorithms have been added in this software ??

[schriss]

So no V7 anytime soon?

[CharlieCox]

So no V7 anytime soon?

No, just stay away from Monero and Electroneum

[cod3gen]

I already have a working version. Which will be made public in a short time. Bummer is, not possible to OC, and not possible to mine V7 at this moment. Firmware updates are needed.

Code:

sgminer 5.6.2-BK_cod3gen_MOD - Started: [2018-03-27 20:28:01] - [0 days 02:15:45]
--------------------------------------------------------------------------------
(5s):20.16K (avg):20.11Kh/s | A:392  R:0  HW:0  WU:3.088/m
ST: 1  SS: 27  NB: 88  LW: 8420  GF: 0  RF: 0
Connected to pool.supportxmr.com (stratum) diff 500K as user XXX
Block: 3516dd19...  Diff:0  Started: [22:42:41]  Best share: 556M
--------------------------------------------------------------------------------
 [U]SB management [P]ool management [S]ettings [D]isplay options [Q]uit
BKLU 0: 34C 200MHz [ASICS #32] | 6.670K/6.672Kh/s | A:125 R:0 HW:0 WU:1.002/m
BKLU 1: 33C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:132 R:0 HW:0 WU:1.032/m
BKLU 2: 34C 200MHz [ASICS #32] | 6.718K/6.721Kh/s | A:135 R:0 HW:0 WU:1.054/m

Will post another thread once everything is in place.

where can i download this? or isn't it finished yet?

There is no rise in performance for cryptonight miners, however you can find it here: https://github.com/cod3gen/sgminer-baikal

yea, i already got it but there's no exe or bat file.

what command do you put in?

There is no exe`s and bat`s in linux.

[igotek]

Totally disaster....

The biggest money laundering in 2018